CEE-plus™, ZEE-plus™
and ZED-plus™ Purlin & Girt
High Strength
Light-weight
Recyclable
1
Purlin & Girt
LYSAGHT® CEE-plus™, ZEE-plus™ & ZED-plus™ are Tighten all bolts to 55 N-m torque. Nominal section
products specially designed and developed for purlin size (mm)
and girt application, which not only provides economy M12 purlin bolt
to the building construction, but also helps in keeping 100,
150, 200, 250 standard(grade 4.6) or high
the site clean and environment friendly. strength (grade 8.8)
LYSAGHT® CEE-plus™, ZEE-plus™ & ZED-plus™ sections
M16 purlin bolt
are accurately roll-formed from high strength zinc- 300*
standard(grade 4.6) or high
coated steel, pre-punched to the required dimensions
strength (grade 8.8)
to provide an efficient, lightweight, economical purlin
*Non standard items
and girts.
Size and Dimensions*
These products are suitable for roof, wall support and
The standard sizes for purlins are produced in nominal
portal framing up to a certain span. The system, which
depth of 100,150, 200, 240/250 and 300 mm. The sections
includes bridging and a comprehensive range of
are generally designed by code number signifying the
accessories, is supplied as ready for erection.
nominal depth and material thickness and letter prefix
Material Specifications to indicate the profile. Purlin are generally produced in
LYSAGHT® CEE-plus™, ZEE-plus™ & ZED-plus™ sections thickness of 1.0, 1.2, 1.5, 1.9, 2.4 and 3.0 mm.
* Max 400 mm depth available on request please contact Tata BlueScope Steel office.
are roll-formed from galvanised steel complying with
IS 277-2003. In the grades shown, the number prefixed Z 200 15
with 'G' indicates minimum yield stress in MPa; and the
number prefixed with Z indicates minimum coating
mass in g/m2. Z section Nominal Depth Base Metal
(mm) Thickness
1.0 mm BMT: G550, Z275 (1/10mm)
1.9 mm BMT: G350, Z275
2.4 mm BMT: G350, Z275 Shapes and Sections
Basic cold formed shapes - CEE-plus™, ZEE-plus™ &
Note: LYSAGHT® CEE™ & ZED™ section are also available
ZED-plus™ are used for purlins and girts. While each
with Zinc coating of 120 g/m2. Please contact nearest
has individual characteristics, perform effectively and
Tata BlueScope Steel office for further information.
in many instances the choice of one section over the
Bolt Specification other can come down to the personal preference of the
LYSAGHT® purlin bolts and nuts have integral washers. designer.
2
Dimensions and Sectional Properties of LYSAGHT® Purlin & Girts
Lip
W(tp) W(tp) W(tp)
Lip
Lip
thk thk thk
Depth
Depth
Depth
36.5
Lip
Lip
100 / 75
W(bt)
61
40
W(bt) W(bt)
50/40 102
ZEE-plus™ PURLIN & GIRTS ZED-plus™ PURLIN & GIRTS CEE-plus™ PURLIN & GIRTS SMARTRUSS C100 & C75 TOPSPAN TS 60 & TS 40
(45 DEG LIP) (90 DEG LIP) (90 DEG LIP)
Table 1: LYSAGHT® ZEE-plus™ (450 LIP) PURLIN & GIRTS PROPERTIES
Name Depth W(Tp) W(Bt) Thk Lip Rad Lip angle Area Wt (Kg/m) Yb Ix SxTop SxBot Rx Iy Sy Ry
mm mm mm mm mm mm deg cm2 (275GSM) mm cm4 cm3 cm3 mm cm4 cm3 mm
Z15010 152 60 60 1 16 5 45 2.96 2.36 76 108.73 14.31 14.31 60.61 27.06 3.82 30.23
Z15012 152 60 60 1.2 17 5 45 3.57 2.86 76 130.76 17.21 17.21 60.54 33.42 4.68 30.61
Z15015 152 60 60 1.5 18 5 45 4.47 3.56 76 163.34 21.49 21.49 60.42 42.84 5.95 30.94
Z15019 152 60 60 1.9 19 5 45 5.68 4.49 76 206.19 27.13 27.13 60.24 55.43 7.65 31.23
Z15024 152 60 60 2.4 20 5 45 7.18 5.64 76 258.82 34.06 34.06 60.02 71.23 9.76 31.49
Z20015 200 70 70 1.5 19.8 5 45 5.55 4.46 100 343.29 34.33 34.33 78.66 66.12 7.94 34.52
Z20019 200 70 70 1.9 23 5 45 7.13 5.7 100 439.8 43.98 43.98 78.57 91.19 10.69 35.78
Z20020 200 70 70 2.0* 23 5 45 7.49 6 100 461.98 46.2 46.2 78.52 95.7 11.22 35.74
Z20024 200 70 70 2.4 23.8 5 45 9 7.17 100 552.39 55.24 55.24 78.35 116.19 13.57 35.93
Z20030 200 70 70 3 24.8 5 45 11.25 9.1 100 685.89 68.59 68.59 78.08 146.91 17.08 36.14
Z24015 240 70 70 1.5 27.3 5 45 6.37 5.13 120 549.62 45.8 45.8 92.86 82.53 9.32 35.98
Z24019 240 70 70 1.9 28 5 45 8.08 6.46 120 693.76 57.81 57.81 92.69 105.38 11.86 36.13
Z24024 240 70 70 2.4 28.8 5 45 10.2 8.13 120 872.13 72.68 72.68 92.47 134.17 15.05 36.27
Z24030 240 70 70 3.0 29.8 5 45 12.75 10.28 120 1084.05 90.34 90.34 92.21 169.5 18.92 36.46
Z30019 300 95 95 1.9 23 5 45 9.94 7.98 150 1341.32 89.42 89.42 116.18 185.03 17.11 43.15
Z30024 300 95 95 2.4 23.8 5 45 12.56 10.04 150 1689.92 112.66 112.66 115.99 236.47 21.77 43.39
Z30030 300 95 95 3* 24.8 5 45 15.7 12.52 150 2103.74 140.25 140.25 115.75 298.31 27.37 43.59
Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request.
Table 2: LYSAGHT® ZED-plus™ (900 LIP) PURLIN & GIRTS PROPERTIES
Name Depth W(Tp) W(Bt) Thk Lip Rad Lip angle Area Wt (Kg/m) Yb Ix SxTop SxBot Rx Iy Sy Ry
mm mm mm mm mm mm deg cm2 (275GSM) mm cm4 cm3 cm3 mm cm4 cm3 mm
Z15010 152 65 61 1 13 5 90 2.91 2.36 77.04 105.86 14.12 13.74 60.36 23.66 3.73 28.54
Z15012 152 65 61 1.2 16 5 90 3.55 2.86 77.02 128.88 17.19 16.73 60.28 30.77 4.86 29.45
Z15015 152 65 61 1.5 17 5 90 4.44 3.56 77.02 160.54 21.41 20.84 60.12 38.87 6.15 29.58
Z15019 152 65 61 1.9 18 5 90 5.63 4.49 77.01 201.92 26.93 26.22 59.9 49.42 7.84 29.64
Z15024 152 65 61 2.4 20 5 90 7.15 5.64 77.01 253.9 33.86 33.97 59.61 64.02 10.2 29.93
Z20015 203 79 74 1.5 16 5 90 5.58 4.46 102.85 355.03 35.45 34.52 79.75 63.76 8.27 33.8
Z20019 203 79 74 1.9 20 5 90 7.19 5.7 102.83 455.5 45.47 44.3 79.62 87.48 11.38 34.89
Z20024 203 79 74 2.4 22 5 90 9.11 7.17 102.82 574.04 57.3 55.83 79.36 112.92 14.74 35.2
250Z15 254 79 74 1.5 18 5 90 6.41 5.13 128.48 607.53 48.4 47.29 97.38 67.14 8.7 32.37
250Z19 254 79 74 1.9 19 5 90 8.12 6.46 128.48 766.79 61.09 59.68 97.2 85.38 11.09 32.43
250Z24 254 79 74 2.4 21 5 90 10.29 8.13 128.47 968.23 77.13 75.37 97 110.3 14.38 32.74
Z30019 300 100 93 1.9 27 5 90 10.05 7.98 151.97 1357.77 91.72 89.34 116.21 187.31 19.21 43.16
Z30024 300 100 93 2.4 28 5 90 12.69 10.04 151.97 1706.16 115.26 112.27 115.95 236.14 24.29 43.14
Z30030 300 100 93 3* 30 5 90 15.89 12.52 151.96 2126.24 143.63 139.92 115.66 298.65 30.81 43.35
Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request.
3
Purlin & Girt
Table 3: LYSAGHT® CEE-plus™ PURLIN & GIRTS PROPERTIES
Name Depth W(Tp) W(Bt) Thk Lip Rad Lip angle Area Wt (Kg/m) Yb Ix SxTop SxBot Rx Iy Sy Ry
mm mm mm mm mm mm deg cm2 (275GSM) mm cm4 cm3 cm3 mm cm4 cm3 mm
C10010 102 51 51 1 12.5 5 90 2.16 1.75 51 36.38 7.13 7.13 41.08 7.55 2.19 18.71
C10012 102 51 51 1.2 12.5 5 90 2.58 2.09 51 43.25 8.48 8.48 40.98 8.92 2.59 18.61
C10015 102 51 51 1.5 13.5 5 90 3.22 2.59 51 53.74 10.54 10.54 40.81 11.24 3.29 18.67
C10019 102 51 51 1.9 14.5 5 90 4.09 3.27 51 67.32 13.2 13.2 40.58 14.24 4.21 18.66
C10024 102 51 51 2.4 16 5 90 5.18 4.11 51 83.98 16.47 16.47 40.27 18.09 5.42 18.69
C15010 152 64 64 1 14 5 90 2.95 2.36 76 107.81 14.19 14.19 60.5 15.66 3.46 23.06
C15012 152 64 64 1.2 14.5 5 90 3.53 2.86 76 128.96 16.97 16.97 60.4 18.81 4.17 23.07
C15015 152 64 64 1.5 15.5 5 90 4.43 3.56 76 160.68 21.14 21.14 60.25 23.68 5.29 23.13
C15019 152 64 64 1.9 16.5 5 90 5.61 4.49 76 202.15 26.6 26.6 60.04 30.03 6.75 23.14
C15024 152 64 64 2.4 18.5 5 90 7.12 5.64 76 254.34 33.47 33.47 59.76 38.61 8.79 23.28
C20015 200 76 76 1.5 16.9 5 90 5.55 4.46 100 343.47 34.35 34.35 78.68 40.69 7.43 27.08
C20019 200 76 76 1.9 20.4 5 90 7.12 5.7 100 439.19 43.92 43.92 78.51 54.3 10.11 27.61
C20024 200 76 76 2.4 21.6 5 90 9.00 7.17 100 551.03 55.1 55.1 78.25 68.53 12.84 27.6
C20030 200 76 76 3 23.1 5 90 11.25 9.1 100 683.3 68.33 68.33 77.93 85.65 16.17 27.59
C24015 240 76 76 1.5 24.4 5 90 6.37 5.13 120 548.26 45.69 45.69 92.74 49.78 9.09 27.94
C24019 240 76 76 1.9 25.4 5 90 8.07 6.46 120 691.4 57.62 57.62 92.53 63 11.56 27.93
C24024 240 76 76 2.4 26.6 5 90 10.2 8.13 120 868.23 72.35 72.35 92.27 79.41 14.66 27.9
C24030 240 76 76 3 28.1 5 90 12.75 10.28 120 1077.81 89.82 89.82 91.94 99.08 18.42 27.88
C25015 252 76 76 1.5 16.5 5 90 6.32 5.13 126 588.75 46.73 46.73 96.74 43.19 7.53 26.15
C25019 252 76 76 1.9 18.1 5 90 8.02 6.46 126 745.83 59.19 59.19 96.4 55.53 9.76 26.31
C25024 252 76 76 2.4 20.1 5 90 10.18 8.13 126 941.91 74.76 74.76 96.21 71.39 12.66 26.49
C25030 252 76 76 3 22.5 5 90 12.78 10.28 126 1176.56 93.38 93.38 95.97 90.95 16.32 26.68
C30019 300 96 96 1.9 24.1 5 90 9.92 7.98 150 1336.87 89.13 89.13 116.06 115.76 16.38 34.15
C30024 300 96 96 2.4 26.1 5 90 12.58 10.04 150 1687.56 112.5 112.5 115.84 148.06 21.11 34.31
C30030 300 96 96 3 28.5 5 90 15.78 12.52 150 2107.12 140.47 140.47 115.57 187.65 27 34.49
Please contact Tata BlueScope Steel office before adopting for design. Non standard thickness & sizes are also available on special request.
Typical Connection
Handling and Storage in particular should be kept clean, dry and free of dirt or
LYSAGHT® CEE-plus™ and ZED-plus™ sections are dust to prevent difficulties when tightening.
delivered in strapped bundles. Ideally, deliveries should Bundles of purlins must be lifted carefully to avoid
be arranged so that the period between delivery and damage. Long length should be lifted using a separator
installation is minimised. If not required for immediate bar and fabric slings. Care should be taken to prevent
use, bundles of purlins should be neatly stacked off local damage at the lifting points.
the ground and on a slight slope so that water can
drain away. If in the open, it should be protected with
waterproof covers to prevent the entry of water and /
or condensation. If bundle becomes wet, the purlins
should be separated, wiped dry and covered. Other
accessories should be treated similarly. Bolts and nuts
4
Application Area in a non-aggressive environment. A non-aggressive
LYSAGHT® ZED-plus™ and ZEE-plus™ sections may environment is 1000 m from rough surf, 750 m from
be used over single spans, un-lapped continuous industrial emission and fossil fuel combustion and 300
and lapped continuous spans in multi-bay buildings. m from calm salt waters. Consideration must be given to
Lapped continuous spans result in a considerable the nature of activities performed within the building.
capacity increase in the system. LYSAGHT® CEE- For corrosive environment, please seek advice from
plus™ sections may be used in single spans and un- Tata BlueScope Steel office.
lapped continuous spans in multi-bay buildings. Compatibility with other Steel
CEE-plus™ sections are ideal as eave Purlin or Products
where compact sections are required for detailing. The zinc coating on purlin is fully compatible with
CEE-plus™ sections cannot be lapped. the zinc and aluminum / zinc coatings used on roof
Corrosion Protection and wall sheeting. If minor damage occurs to the
A zinc coating of Z275 (275 g/m2 minimum coating purlin coating, the base steel is protected by its own
mass) is the standard coating class provided with surrounding coating. Furthermore, the protective
LYSAGHT® CEE-plus™, ZEE-plus™ and ZED-plus™ coating on the sheeting is not corroded by an
sections. This will provide a long and trouble-free life un-protected base steel nearby.
for enclosed buildings and open-sided rural buildings,
5
Structural Performance
HOLES & CLEATS Standard hole for CEE–plus™ sections
LYSAGHT® CEE-plus™, ZEE-plus™ and ZED-plus™ Purlins
are normally supplied with holes punched to the
Australian Institute of Steel Construction (AISC) gauge
lines. The holes are required at cleat supports at ends of
laps and at bridging points.
For the 100, 150, 200 and 250 deep sections, our
standard hole diameter is 16mm maximum suitable
for M12 bolts. For non standard sections like 300, 350
and 400 deep sections, the holes are elongated with
dimensions of 18 mm x 22 mm suitable for M16 bolts.
Sections are also available un-punched, if required.
Tata BlueScope steel's standard elongated punched hole.
Holes equally spaced above and below the line.
6
Standard hole for ZEE–plus™, ZED–plus™ sections
Bridging hole and cleat hole
Typical assembly & connection details
7
Benefits
• High Strength Steel for better
load carrying capacity and greater
spanning capability.
Product Descriptions
• Zinc coated to provide corrosion • All descriptions, specifications, illustrations, drawings, data, dimensions and
weights contained in this catalogue, all technical literature and websites
resistance
containing information from LYSAGHT® are approximations only. They
• Light weight, easy and quick to install are intended by LYSAGHT® to be a general description for information and
identification purposes and do not create a sale by description. LYSAGHT®
• Pre-punched to avoid welding and reserves the right at any time to:
(a) Supply goods with such minor modifications from its drawings and
cutting at site
specifications as it sees fit
• Saves 40-60% steel in comparison (b) Alter specifications shown in its promotional literature to reflect changes
made after the date of such publication
with traditional steel
• Lower maintenance cost Disclaimer, Warranties and Limitation of Liability
• Cladding fixing is easier and quicker • This publication is intended to be an aid for all trades and professionals
involved with specifying and installing LYSAGHT® products and not to be a
substitute for professional judgement
• Terms and conditions of sale available at local LYSAGHT® sales offices
• Except to the extent to which liability may not lawfully be excluded or limited,
Tata BlueScope Steel will not be under or incur any liability to you for any
direct or indirect loss or damage (including, without limitation, consequential
loss or damage such as loss of profit or anticipated profit, loss of use, damage
to goodwill and loss due to delay) however caused (including, without
limitation, breach of contract, negligence and/or breach of statute), which you
may suffer or incur in connection with this publication
BP/PM/0319/Shreeji Stationers
Email us at : [email protected]
Note:
“©2019 Tata BlueScope Steel Pvt. Ltd. All rights reserved. No part of this brochure may Tata BlueScope Steel Pvt. Ltd. CIN: U45209PN2005PTC020270
be reproduced or transmitted in any form or by any means, electronic or mechanical Regd. Office: The Metropolitan, 4th Floor, Final PlotNo. 27,
including photocopy, recording, or any information storage and retrieval system, without Survey No. 21, Wakdewadi, Shivaji Nagar, Pune - 411005. INDIA.
permission in writing from Tata BlueScope Steel Pvt. Ltd.. All brand names mentioned
in this brochure are registered trademarks of BlueScope Steel Limited under license to Tel: +91 20 6621 8000
8
Tata BlueScope Steel Pvt. Ltd." Website: www.tatabluescopesteel.com
