BOQ – CHECK
I) BOQ - Rest Area
i. Cell V36 - Landscaping Area – not matching with calculation table data
ii. Cell V39 - Landscaping Area – not matching with calculation table data
iii. Cell N3 - Internal Roads – DBM omitted (why? → doubt)
iv. Cell F21 – Paver blocks depth not considered
v. Depth of all buildings =?
II) Bill No. 4 & 5 – Pavement
MCW Sheet
i. Cell E13 – Median width – why only half is considered?
B8 CTSB width
ii. Cell P13 – why → in that equation?
2 2
iii. Similarly, Cell Q13
iv. Cell R13 – Doubt in equation
v. Cell S13 – Doubt in equation
SR Sheet
i. Cell M17 – GSB & Sub – grade width same? (Doubt)
ii. Cell D13 to D18 – How to come up with these PCW values?
iii. Cell Q13 – Shoulder Area – Doubt
iv. Cell C24 – Doubt (Area = Length? How?)
MO Sheet
i. Cell C4 – how to come with this value?
ii. Cell C12 – what’s the value 1.542?
iii. IN Table 3 – why the width of every description is calculated as – (minus) instead
of + (plus)? Is there an error?
Sensitivity: LNT Construction Internal Use
iv. Cell C27 – Doubt in calculation.
Deduction Sheet
i. Cell G5 – why ‘× 4’?
III) Bill No. 6 – Drainage Works
Roadside Drain Sheet
i. Cell D3 – Is there a covered lined drain in TCS 1? – every TCS
ii. Cell D5 – Is there a covered lined drain in TCS 3? – What’s drain sprout?
iii. Cell H7 & I7 – TCS 4A - Open Lined Drain & Catch water drain? Which are these?
iv.
IV)
Sensitivity: LNT Construction Internal Use