Catalog 0700P-6 Prep-Air ® II, 02L Series
Miniature 02L Series 1/4" & 3/8" – Basic 1/4" Body
02L Lubricator – Miniature
A
Features Specifications
• Extends the service life Flow Capacity* (1/4) ................................. 29 SCFM (13.6 dm3 /s)
(3/8) ................................. 30 SCFM (14.2 dm3 /s)
of air operated hand
Operating Temperature .........................32° to 150°F (0° to 65.5°C)
tools.
Maximum Supply Pressure .............................. 200 PSIG (13.8 bar)
• Reduces downtime of Oil Capacity ...........................................................0.25 oz. (7.4 cm3 )
air operated equipment, Port Size ........................................................... 1/4, 3/8 NPT / BSPT
saves money. Weight ......................................................................... 0.2 lb. (0.1 kg)
* Inlet pressure 90 PSIG (6.2 bar). Pressure drop 5 PSID (0.3 bar).
• Small / lightweight.
• Automatic lubrication Materials of Construction
with air tool operation. Body ................................................................................... Aluminum
• Adjustable oil flow. Seals ..........................................................................................Nitrile
• Corrosion resistant. Suggested Lubricant F442 Oil
Petroleum based oil of 100 to 200 SSU viscosity at 100°F and
• Full swivel outlet port. an aniline point greater than 200°F(DO NOT USE OILS WITH
Application ADDITIVES,COMPOUNDED OILS CONTAINING SOLVENTS,
GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)
In-Line Lubricators assure proper lubrication for small Oil –1 Gal ..............................................................................F442002
pneumatic hand tools. These in-line lubricators put the Quart Case ...........................................................................F442003
oil source right at the tool. Oil capacity is 1/4 oz. (1 ml), Gallon Case .........................................................................F442005
enough to last through an average 8-hour shift. This
lubricator requires cyclical or intermittent airflow for Replacement Kits
proper operation, and consequently works best when Fill Plug Kit – Brass Fill Plug and O-ring ............................ PS434
installed at the tool inlet or on a short hose near the O-ring Repair Kit .................................................................... PS435
tool. The 02L cannot be filled under pressure.
Inlet Pressure 02LFB, 02L1B
PSIG 30 60 90 120 150
bar 2.4 4.1 6.2 8.2 10.3
5
PSID
bar
0.3
4
PRESSURE DROP
C B 3
0.2
0.1
Inlet Outlet 1
Female
D
0 0
A 0 5 10 15 20 25 30 35 40 SCFM
Dimensions 0 5 10 15 20 dm3/s
AIR FLOW RATE
Part Number A B C D
2.65 1.305 1.125 .65 Inlet Pressure 02L2B
02LFB PSIG 30 60 90 120 150
(67) (33) (28.5) (16.5) bar 2.4 4.1 6.2 8.2 10.3
2.93 1.305 1.125 .65
PSID
5
bar
02L1B
(74) (33) (28.5) (16.5)
0.3
3.19 1.305 1.125 .65 4
PRESSURE DROP
02L2B
(81) (33) (28.5) (16.5)
Inches (mm) 3
0.2
0.1
1
Ordering Information
0 0
Female Threads Inlet / Female Threads Inlet /
Port Size 0 5 10 15 20 25 30 35 40 SCFM
Female Threads Outlet Male Threads Outlet
1/4" 02LFB 02L1B 0 5 10 15 20 dm3/s
AIR FLOW RATE
3/8" N/A 02L2B
A121 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
[Link]/pneumatics
