PROFILCO PR-52

MAY - 2006
PROFILCO PR-52

ÌÅÈÏÄÏÉ ÅËÅÃ×ÏÕ ÐÏÉÏÔÇÔÁÓ QUALITY CONTROL METHODS

ÐÑÏÉÏÍÔÙÍ ÄÉÅËÁÓÇÓ FOR EXTRUDED PROFILES AND
ÊÁÉ ÇËÅÊÔÑÏÓÔÁÔÉÊÇÓ ÂÁÖÇÓ POWDER COATINGS

Ç åôáéñåßá ìáò ôçñþíôáò ôï óýóôçìá ISO Our company abides ISO 9001 system carry
9001, äéåíåñãåß Ýëåã÷ï óôá ðñïúüíôá óôï out tests on the extruded profiles by the
ÔìÞìá ÐáñáãùãÞò êáé ôï ÔìÞìá Ðïéïôéêïý Department of Production and Quality
ÅëÝã÷ïõ âÜóåé ðñïäéáãñáöþí ôïõ ÅËÏÔ Control of our company, implementing ISO
ÅÍ 12020-2, ÅÍ 755.02 êáé DIN 17615 ãéá 9001 system, carries out tests on the extruded
ôá ãåùìåôñéêÜ ÷áñáêôçñéóôéêÜ ôïõ Üâáöïõ profiles. The tests have been done by the
ðñïößë êáé ôïõ QUALICOAT üóïí áöïñÜ specifications of ELOT EN 12020-2, ÅÍ
ôçí åðéêÜëõøÞ ôïõò. 755.02 and DIN 17615 and those of
QUALICOAT for the powder coating.

ÐÑÏÖÉË ÁËÏÕÌÉÍÉÏÕ ALUMINUM PROFILES

Ãéá ôç ðáñáãùãÞ ôùí ðñïößë Alloy EN AW 6063 (Al Mg 0.7Si) used for the
÷ñçóéìïðïéåßôáé êñÜììá ÅÍÁW 6063 production of profiles has the following
(Al Mg 0.7Si) ìå ôá ðáñáêÜôù ôå÷íéêÜ technical characteristics:
÷áñáêôçñéóôéêÜ: Heat treatment: T5
ÈåñìéêÞ êáôåñãáóßá: Ô5 0.2% Proof Strength: RP0.2 = 130 Ìpa (min)
¼ñéï äéáñïÞò: RP0.2 = 130 Ìpa (min) Ultimate strength: Rm = 175 Ìpa (min)
¼ñéï èñáýóçò: Rm = 175 Ìpa (min) Density: Y = 2,69 gr/cm3
Åéäéêü âÜñïò: Y = 2,69 gr/cm3 Elastic modulus: Å = 70.000 N/mm2
MÝôñï åëáóôéêüôçôáò: Å = 70.000 N/mm2 Coefficientlinearexpansion:
ÓõíôåëåóôÞò ãñáììéêÞò äéáóôïëÞò: á=2,34x10-6 /K
á = 2,34x10-6/ K Minimum elongation:Á50mm% = 6 (min)
Ðáñáìüñöùóç èñáýóçò:Á50mm% = 6 (min)

ÃÅÙÌÅÔÑÉÊÁ ×ÁÑÁÊÔÇÑÉÓÔÉÊÁ GEOMETRICAL CHARACTERISTICS

ÄéáóôÜóåéò Dimensions
Ïé äéáóôÜóåéò (ðÜ÷ïò êáé üëåò ïé õðüëïéðåò The tolerances of dimensions (wall thickness
äéáóôÜóåéò) áêïëïõèïýí ôéò ðñïäéáãñáöÝò and all the rest dimensions) follow the
ôïõ ÅÍ 12020-2 ð.÷. åÜí Ý÷ïõìå ìéá specifications of EN 12020-2 e.g. if we have
ïíïìáóôéêÞ äéÜóôáóç 55 ÷éë äßíåôáé áíï÷Þ 55 mm dimension the tolerance is (+/-) 0.40
(+/-) 0,40 ÷éë. ôï ïðïßï óçìáßíåé üôé mm, which means that the dimension is
êõìáßíåôáé áðü 54,60 Ýùò 55,40 ÷éë. between 54,60 and 55,40 mm.

ÓôñÝâëùóç Twist
Óýìöùíá ìå ôéò ðñïäéáãñáöÝò ôïõ ÅÍ By the specifications of EÍ 12020-2 for a
12020-2 ãéá Ýíá ðñïößë ìå ðëÜôïò ìÝ÷ñé 75 profile bar with width no more than 75 mm the
÷éë. ç áðüêëéóç åßíáé 2 ÷éë. Ãéá íá åëåã÷èåß ç deviation is 2 mm. The twist is measured by
óôñÝâëùóç ðñÝðåé ç âÝñãá íá ôïðïèåôçèåß placing the bar on a flat base plate and
óå åðßðåäï ðÜãêï êáé íá ìåôñçèåß ç ìÝãéóôç measuring the maximum distance at any point
áðüóôáóç óå ïðïéïäÞðïôå óçìåßï ôçò along the length between the bottom surface
âÝñãáò ìåôáîý ôçò êÜôù åðéöÜíåéáò áõôÞò of the bar and the base plate surface.
êáé ôïõ ðÜãêïõ.

MAY - 2006 A1
 PROFILCO PR-52

Åõèýôçôá Straightness
Óýìöùíá ìå ôéò ðñïäéáãñáöÝò ôïõ ÅÍ By the specifications of EÍ 12020-2 for a 6
12020-2 ãéá ìéá âÝñãá 6 ìÝôñùí, ôï meter bar the allowed deviation from
åðéôñåðüìåíï âÝëïò åßíáé 3 ÷éë. êáé ï Ýëåã÷ïò straightness is 3 mm and is measured with the
ãßíåôáé óôçñßæïíôáò ôç âÝñãá óôéò äýï Üêñåò profile bar placed on horizontal base plate, so
ôçò ðÜíù óå Ýíáí åðßðåäï ðÜãêï. Ôï âÝëïò that its own mass decreases the deviation. The
óôç ìÝóç ôçò âÝñãáò äåí ðñÝðåé íá åßíáé deviation in the middle of the bar must not
ðÜíù áðü 3 ÷éë. exceed the 3 mm.

Óêëçñüôçôá Hardness
H óêëçñüôçôá ôùí ðñïößë åëÝã÷åôáé The profile's hardness is tested by the
óýìöùíá ìå ôéò ðñïäéáãñáöÝò ÅÍ ISO specifications of EN ISO 6506-1.
6506-1.

ÇËÅÊÔÑÏÓÔÁÔÉÊÇ ÂÁÖÇ ELECTROSTATIC COATING

ÅìöÜíéóç Appearance
Ç åðéêÜëõøç ôùí óçìáíôéêþí åðéöáíåéþí The coating on the significant surface is
åîåôÜæåôáé êÜôù áðü ïðôéêÞ ãùíßá 60ï êáé viewed at an oblique angle of about 60 0 and at
áðüóôáóç 2 ìÝôñùí (ïé ðñïäéáãñáöÝò ôïõ distance of 2 meters. (The specifications of
QUALICOAT áíáöÝñïõí 3 ìÝôñá). Äåí QUALICOAT mention 3 meters). Excessive
ðñÝðåé íá åßíáé ïñáôÜ åëáôôþìáôá üðùò: roughness, runs, blisters, inclusions, craters,
åìöÜíéóç öëïýäáò ðïñôïêáëéïý, óôßãìáôá, dull spots, pinholes, pits, scratches must not
ìðéìðßêéá, êñáôÞñåò, ê.ë.ð. be visible from this distance.

Õðüëïéðïé ðñïâëåðüìåíïé Ýëåã÷ïé Rest regulation tests

Ï Ýëåã÷ïò ôïõ ðÜ÷ïõò åðéêÜëõøçò êáé ïé The Quality Control Department, with
äéÜöïñåò ìç÷áíéêÝò êáé ÷çìéêÝò äïêéìáóßåò specialized technical stuff in a well-equipped
äéåíåñãïýíôáé áðü ôïí Ðïéïôéêü ¸ëåã÷ï ìå laboratory, carries out the coating thickness
åîåéäéêåõìÝíï ðñïóùðéêü êáé óå tests as well as several chemical and
åîïðëéóìÝíá åñãáóôÞñéá. mechanical tests. For the above-mentioned
Ãéá ôïõò ðáñáðÜíù åëÝã÷ïõò êáé äïêéìÝò tests the QUALICOAT specifications are
áêïëïõèïýíôáé ïé ðñïäéáãñáöÝò ôïõ followed.
QUALICOAT.

Áðïêëßóåéò Tolerances
Ôï âÜñïò ðïõ åìöáíßæåôáé óôïí êáôÜëïãï Weight that is shown in present catalogue, is
åßíáé ôï èåùñçôéêü âÜñïò ôïõ Üâáöïõ the theoretical weight of mill finish profile.
ðñïößë. There is a tolerance between the theoretical
ÕðÜñ÷ïõí áðïêëßóåéò ìåôáîý ïõ èåùñçôéêïý and the actual weight, which is up to (+/-)6%,
êáé ôïõ ðñáãìáôéêïý âÜñïõò ðïõ öôÜíïõí ôï and the additional weight due to color is up to
(+/-) 6% åíþ ôï ðñïóôéèÝìåíï âÜñïò áðü ôçí 3-4 %.
âáöÞ öôÜíåé óôï ýøïò ôïõ 3-4%.

A2 MAY - 2006
PROFILCO PR-52

“ PRESS AT038-102 ”
“ÐñåóÜêé Êïðôéêü”

PLUG FOR
DRAINAGE
AA052-554
Ðëáóôéêü êÜëõìá
AA052-554

CHREMONE
FOR WINDOW PROFILCO
AA107-195
ÓðáíéïëÝôá ãéá
ðáñÜèõñï ÁA107-195

CORNER JOINT
AA052-119
Ãùíßá óýíäåóçò
AA052-119 JOINT FOR
MULLIONS
AA052-035
Óýíäåóìïò ãéá Ô
AA052-035
ROD
Íôßæá
25

2.8
11

4.8
6

14

27 17,5 8
8

16

CORNER JOINT
Ãùíßá óýíäåóçò
12

10

MAY - 2006 F25

PROFILCO PR-52

CODE : AA107-195 CODE : AA104-205

Chremone bolt for window Lever handle for door

ÓðáíéïëÝôá ãéá ðáñÜèõñï Ðüìïëï äéðëü ãéá ðüñôá

CODE : AA107-440 CODE : AA403-505

Chremone bolt for window Click lever handle for window

ÓðáíéïëÝôá ãéá ðáñÜèõñï Ðüìïëï ìïíü ãéá ðáñÜèõñï

CODE : AA107-441 CODE : AA114-362

Chremone bolt with safety lock Handle for door Ö 32 360 mm

ÓðáíéïëÝôá ãéá ðáñÜèõñï ×åéñïëáâÞ ãéá ðüñôá
ìå êëåéäáñéÜ áóöáëåßáò

CODE : AA104-302 CODE : AA114-364

Lever handle for door Handle for door Ö 32 360 mm

Ðüìïëï äéðëü ãéá ðüñôá ×åéñïëáâÞ ãéá ðüñôá

CODE : AA104-640 CODE : AA114-363

Lever handle for door Handle for door Ö 32 360 mm

Ðüìïëï äéðëü ãéá ðüñôá ×åéñïëáâÞ ãéá ðüñôá

MAY - 2006 G1
 PROFILCO PR-52

CODE : AA113-010 CODE : AA112-001

Aluminium hinge Shutters hinge 52 mm

ÌåíôåóÝò NORMAL äéðëüò ÌÜóêïõëï 52 ÷éë

CODE : AA113-003 CODE : AA113-052

Aluminium hinge triple Hinge for door

ÌåíôåóÝò ãéá ðüñôá
ÌåíôåóÝò ôñéðëüò

CODE : AA113-012 CODE : AA113-031

Three leaf Aluminium hinge for

aluminium hinge Aller Retour doors 50mm
ÌåíôåóÝò ôñßöõëëïõ ÌåíôåóÝò ãéá ðüñôåò ÁëÝ Ñåôïýñ 50 ÷éë.

CODE : AA113-041 CODE : AA430-001

Hinge for door Safety latch for windows

ÌåíôåóÝò ãéá ðüñôá ÁåñïðëáíÜêé ãéá ðáñÜèõñá

CODE : AA430-003
CODE : AA113-670

Safety latch Fapin for windows

ÁåñïðëáíÜêé ãéá ðáñÜèõñá
Aluminium hinge for door
AA113 028
AA113 026 ÌåíôåóÝò ãéá ðüñôá

G2 MAY - 2006
PROFILCO PR-52

CODE : AA111-001
CODE : AA109-006

One position limit arm

Tilt and turn Lavaal ÊïõìðÜóï NORMAL
Ìç÷áíéóìüò áíÜêëéóçò áíÜêëéóçò

CODE : AA109-031 CODE : AA111-007

Arm for Tilt-Turn Lavaal

Øáëßäé ìç÷áíéóìïý áíëÜêëéóçò Five position limit arm
Lavaal ÊïõìðÜóï ôçëåóêïðéêü

CODE : AA105-372
CODE : AA109-061

Door dead bolt Fapin

Tilt and turn Fapim Óýñôçò äßöõëëçò ðüñôáò
Ìç÷áíéóìüò áíÜêëéóçò

CODE : AA109-021 CODE : AA105-008

Arm for Tilt-Turn Fapim

Øáëßäé ìç÷áíéóìïý áíÜêëéóçò Second leaf bolt
Fapim Óýñôçò äßöõëëïõ

CODE : AA116-006 CODE : AA116-002

Safety Corner Safety Eccentric

For Extra Lock ( Lavaal) For Tilt-Turn
ÁóöÜëåéá ìç÷áíéóìïý ¸êêåíôñç áóöÜëåéá
Extra (Lavaal) ìç÷áíéóìïý

MAY - 2006 G3
 PROFILCO PR-52

CODE : AA212-002 CODE : AA212-001

Aluminium extension rod Polyamidium extension rod

Íôßæá áëïõìéíßïõ Íôßæá ðïëõáìéäßïõ

CODE : AA116-003 CODE : AA108-004

Safety Extra
Second Leaf Security kit for chremone
ÁóöÜëåéá Êéô áóöáëåßáò ãéá
äåýôåñïõ öýëëïõ óðáíéïëÝôá

CODE : AA105-014 CODE : AA332 400

Air STOP input

Latch single autom.
Óýñôçò ìï÷ëïý Áåñïóôüð

CODE : AA332-200

Air STOP input

double autom.
Áåñïóôüð

G4 MAY - 2006
PROFILCO PR-52

CODE : AA101-011 CODE : AA103-004

Lock for door 35 mm Striking plate for lock

ÊëåéäáñéÜ ãéá ðüñôá Áíôßêñéóìá ãéá êëåéäáñéÜ
35 ÷éë.

CODE : AA101 -012 CODE : AA103-007

Lock for door 35 mm

ROLLER Striking plate for lock
ÊëåéäáñéÜ ìå ìðßëéá Áíôßêñéóìá ãéá êëåéäáñéÜ
ãéá ðüñôá 35 ÷éë.

CODE : AA101-002 CODE : AA103-005

Lock for door 25 mm

ÊëåéäáñéÜ ãéá ðüñôá Striking plate for lock
Áíôßêñéóìá ãéá êëåéäáñéÜ
25 ÷éë.

CODE : AA102-014 CODE : AA102-011

Cylinder for security Cylinder for security

lock 80 mm lock 75 mm
Êýëéíäñïò ãéá êëåéäáñéÜ Êýëéíäñïò ãéá êëåéäáñéÜ
80 ÷éë 75 ÷éë

MAY - 2006 G5
 PROFILCO PR-52

CODE : AA052-014 CODE : AA052-019

Adaptor for corner joint 49/23

Corner joint 49/15
Ãùíßá óýíäåóçò 49/15 ãéá ÐñïóèÞêç ãéá ãùíßá
52-201,202,208,209 óýíäåóçò 49/23 ãéá 52-303,306,309

CODE : AA052-015 CODE : AA052-018

Corner joint 36.3/20 Adaptor for corner joint 41/23

Ãùíßá óýíäåóçò 36,3/20 ãéá ÐñïóèÞêç ãéá ãùíßá
52-210,211,212,213,411 óýíäåóçò 41/23 ãéá
52-304,308,311

CODE : AA052-016 CODE : AA052-070

Corner joint 41/15

Ãùíßá óýíäåóçò 41/15 ãéá Press corner joint 41/15
52-205,301,302,303,304,305, Ãùíßá óýíäåóçò ðñåóóáñéóôÞ
306,307,308,309,310,311,313,602 41/15 ãéá 52-205,301,302

CODE : AA052-012 CODE : AA052-071

Corner joint 41.5/20 Press corner joint 49/15

Ãùíßá óýíäåóçò 41,5/20 ãéá 52-210,312 Ãùíßá óýíäåóçò ðñåóóáñéóôÞ
49/15 ãéá 52-201,202,208,209

CODE : AA052-017 CODE : AA052-072

Corner joint 41/40

Press corner joint 41/38
Ãùíßá óýíäåóçò 41/40 ãéá Ãùíßá óýíäåóçò ðñåóóáñéóôÞ
52-303,304,306,311 41/38 ãéá 52-304,311

G6 MAY - 2006
PROFILCO PR-52

CODE : AA055-021 CODE : AA043-030

Corner joint 26/20

Ãùíßá óýíäåóçò 26/20 Corner joint 35.5/15
ãéá 52-212,213 Ãùíßá óýíäåóçò 35.5/15
ãéá ôï 52-204

CODE : AA052-020 CODE : AA052-002

Adaptor corner joint 44/5 Corner joint for mullions

ÐñïóèÞêç ãùíßáò óýíäåóçò 44/5 Ãùíßá óýíäåóçò ãéá Ô

CODE : AA052-047
CODE : AA043-002
Alignment corner joint 5 mm
Ãùíßá åõèõãñÜììéóçò
Corner joint for mullions
Ãùíßá óýíäåóçò ãéá Ô

CODE : AA052-048 CODE : AA052-035

Alignment corner inox 5mm

Ãùíßá åõèõãñÜììéóçò áíïîåßäùôç Joint for mullions
Óýíäåóìïò ãéá Ô

CODE : AA052-049 CODE : AA052-119

Alignment corner
joint 16 mm Corner joint for frame
Ãùíßá åõèõãñÜììéóçò Ãùíßá óýíäåóçò ãéá êÜóóá

MAY - 2006 G7
 PROFILCO PR-52

CODE :AA010-015
CODE : AA052-007

Push in glazing
gasket 1 mm
ËÜóôé÷ï ôæáìéþí 1÷éë. Gasket EPDM
ËÜóôé÷ï

CODE : AA010-002
CODE : AA052-068

Gasket 2 mm
ËÜóôé÷ï 2 ÷éë. Gasket with hard base
2 mm ËÜóôé÷ï óêëçñÞ âÜóç

CODE : AA010-003 CODE : AA052-006

Gasket 3 mm Gasket EPDM

ËÜóôé÷ï 3 ÷éë. ËÜóôé÷ï êÜóáò-öýëëïõ
3 mm

CODE : AA010-004 CODE : AA052-004

Gasket 4 mm Gasket central EPDM

4 mm ËÜóôé÷ï 4 ÷éë. ËÜóôé÷ï êÜóáò

CODE : AA010-005 CODE : AA052-097

Gasket 5 mm Vulcanized corner gasket

ËÜóôé÷ï 5 ÷éë. ÅëáóôéêÞ ãùíßá ëáóôß÷ïõ
5 mm

G8 MAY - 2006
PROFILCO PR-52

CODE : AA052-536 CODE : AA052-537

Plastic plug for Plastic plug for

profile 52-536 for shutter 52-310 profile 52-537
ÔÜðá äßöõëëïõ ãéá ìðéíß 52-536
ÔÜðá äßöõëëïõ ãéá ìðéíß 52-537
ãéá öýëëï ðáôæïõñéïý 52-310

CODE : AA052-544 CODE : AA052-539

Plastic plug for

profile 52-544
Plastic plug for profile 52-539
ÔÜðá äßöýëëïõ
ÐëáóôéêÞ ôÜðá ãéá ôï ðñïößë 52-539
ãéá ìðéíß 52-544

CODE : AY099-018 CODE : AA052-920

Adjustable apostate Plastic plug for

for frames water drip 52-920
ÐëáóôéêÞ ôÜðá íåñïóôáëÜêôç
ÁðïóôÜôçò êÜóáò ñõèìéæüìåíïò 52-920

CODE : AA052-554 CODE : AA206-013

Plug for drainage

Ðëáóôéêü êÜëõììá Plastic plug for single louver
ÌïíÞ ôÜðá ïâáëßíáò

CODE : AA052-113 CODE : AA206-019

Clip for profile 52-912

Êëéð ãéá ðç÷Üêé 52-912 Plastic plug for double louver
ÄéðëÞ ôÜðá ïâáëßíáò

MAY - 2006 G9
 PROFILCO PR-52

CODE : AA052-022 CODE : AA052-021

Gasket for bottom rail Gasket for threshold

ËÜóôé÷ï ãéá êÜôù ôáìðëÜ ËÜóôé÷ï ãéá êáôþöëé

CODE : AA052-060 CODE : AA331-007

Gasket with hard base

ËÜóôé÷ï öïýóêá Brushes No 7mm
ÂïõñôóÜêé 7 ÷éë.
óêëçñÞ âÜóç

CODE : AA052-112
CODE : AA201-003
Corner for curved
Plastic external corner
cover for swing doors glazing beads
Ãùíßá êáëëùðéóìïý Ãùíßá ãéá ðç÷Üêéá
öýëëïõ åîùôåñéêÞ

CODE : AT037-003 CODE : AT029-002

Scissor for gasket Pneum. pistol for

0
45 metal handle MAWEX glue
Øáëßäé ãéá ëÜóôé÷á Ðéóôüëé êüëëáò

CODE : AY003-004 CODE : AY003-001(1lt)

AY003-005(310ml)

Glue for corners

Glue for gasket 20gr MAWEX
Êüëëá ãéá ëÜóôé÷ï 20 ãñáì. Êüëëá ãéá ãùíßåò

G10 MAY - 2006

PROFILCO PR-52

CODE : AT036-001 CODE : AT036-002

Mill cutter for 401,402, Mill cutter for 401,

403,404,405,406,501 402,403,404,405,406
Äßóêïò ÊïðÞò Äßóêïò ÊïðÞò

CODE : AT036-043 CODE : AT032-010

Mill cutter Pattern for lock PR-52

Äßóêïò ÊïðÞò ãéá Êáëßìðñá ãéá êëåéäáñéÜ PR-52
52-562,52-563

CODE : AA052-114-00 CODE : AT038-102

Cutting device Hand operated punch

for central gaskets press for
PROFILCO systems
Ïäçãüò êïðÞò êåíôñéêþí ëÜóôé÷ùí
ÐñåóÜêé êïðôéêü

CODE : AT032-007 CODE : AM010-001-00

Pneumatic punch press

Stand for patterns
Ñüôïñáò Ðíåõìáôéêü ðñåóÜêé

MAY - 2006 G11