Installation guide - ArchWiki https://wiki.archlinux.

org/title/Installation_guide

Installation guide
This document is a guide for installing Arch Linux using the live system booted from an installation
medium made from an official installation image. The installation medium provides accessibility
features which are described on the page Install Arch Linux with accessibility options. For
alternative means of installation, see Category:Installation process.

Before installing, it would be advised to view the FAQ. For conventions used in this document, see
Help:Reading. In particular, code examples may contain placeholders (formatted in italics )
that must be replaced manually.

For more detailed instructions, see the respective ArchWiki articles or the various programs' man
pages, both linked from this guide. For interactive help, the IRC channel and the forums (http
s://bbs.archlinux.org/) are also available.

Arch Linux should run on any x86_64-compatible machine with a minimum of 512 MiB RAM,
though more memory is needed to boot the live system for installation.[1] (https://lists.archlinux.
org/pipermail/arch-releng/2020-May/003957.html) A basic installation should take less
than 2 GiB of disk space. As the installation process needs to retrieve packages from a remote
repository, this guide assumes a working internet connection is available.

Contents
Pre-installation
Acquire an installation image
Verify signature
Prepare an installation medium
Boot the live environment
Set the keyboard layout
Verify the boot mode
Connect to the internet
Update the system clock
Partition the disks
Example layouts
Format the partitions
Mount the file systems
Installation
Select the mirrors
Install essential packages
Configure the system
Fstab
Chroot

1 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

Time zone
Localization
Network configuration
Initramfs
Root password
Boot loader
Reboot
Post-installation

Pre-installation

Acquire an installation image

Visit the Download (https://archlinux.org/download/) page and, depending on how you want
to boot, acquire the ISO file or a netboot image, and the respective GnuPG signature.

Verify signature

It is recommended to verify the image signature before use, especially when downloading from an
HTTP mirror, where downloads are generally prone to be intercepted to serve malicious images
(https://www2.cs.arizona.edu/stork/packagemanagersecurity/attacks-on-package-ma
nagers.html).

On a system with GnuPG installed, do this by downloading the PGP signature (under Checksums in
the Download (https://archlinux.org/download/) page) to the ISO directory, and verifying it
with:

$ gpg --keyserver-options auto-key-retrieve --verify archlinux-version-x86_64.iso.sig

Alternatively, from an existing Arch Linux installation run:

$ pacman-key -v archlinux-version-x86_64.iso.sig

Note:
The signature itself could be manipulated if it is downloaded from a mirror site,
instead of from archlinux.org (https://archlinux.org/download/) as above. In
this case, ensure that the public key, which is used to decode the signature, is
signed by another, trustworthy key. The gpg command will output the fingerprint of
the public key.
Another method to verify the authenticity of the signature is to ensure that the
public key's fingerprint is identical to the key fingerprint of the Arch Linux
developer (https://archlinux.org/people/developers/) who signed the ISO-file.

2 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

See Wikipedia:Public-key cryptography for more information on the public-key

process to authenticate keys.

Prepare an installation medium

The installation image can be supplied to the target machine via a USB flash drive, an optical disc
or a network with PXE: follow the appropriate article to prepare yourself an installation medium
from the chosen image.

Boot the live environment

Note: Arch Linux installation images do not support Secure Boot. You will need to disable Secure
Boot to boot the installation medium. If desired, Secure Boot can be set up after completing the
installation.

1. Point the current boot device to the one which has the Arch Linux installation
medium. Typically it is achieved by pressing a key during the POST phase, as
indicated on the splash screen. Refer to your motherboard's manual for details.
2. When the installation medium's boot loader menu appears, select Arch Linux install
medium and press Enter to enter the installation environment.

Tip: The installation image uses systemd-boot for booting in UEFI mode and
syslinux for booting in BIOS mode. See README.bootparams (https://gitlab.arc
hlinux.org/mkinitcpio/mkinitcpio-archiso/blob/master/docs/README.bootpa
rams) for a list of boot parameters.

3. You will be logged in on the first virtual console as the root user, and presented with
a Zsh shell prompt.

To switch to a different console—for example, to view this guide with Lynx (https://lynx.invisible-
island.net/lynx_help/Lynx_users_guide.html) alongside the installation—use the
Alt+arrow shortcut. To edit configuration files, mcedit(1) (https://man.archlinux.org
/man/mcedit.1), nano and vim are available. See packages.x86_64 (https://gitlab.archlinu
x.org/archlinux/archiso/-/blob/master/configs/releng/packages.x86_64) for a list of the
packages included in the installation medium.

Set the keyboard layout

The default console keymap is US. Available layouts can be listed with:

# ls /usr/share/kbd/keymaps/**/*.map.gz

To modify the layout, append a corresponding file name to loadkeys(1) (https://man.archli

nux.org/man/loadkeys.1), omitting path and file extension. For example, to set a German
keyboard layout:

3 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

# loadkeys de-latin1

Console fonts are located in /usr/share/kbd/consolefonts/ and can likewise be set with
setfont(8) (https://man.archlinux.org/man/setfont.8).

Verify the boot mode

To verify the boot mode, list the efivars directory:

# ls /sys/firmware/efi/efivars

If the command shows the directory without error, then the system is booted in UEFI mode. If the
directory does not exist, the system may be booted in BIOS (or CSM) mode. If the system did not
boot in the mode you desired, refer to your motherboard's manual.

Connect to the internet

To set up a network connection in the live environment, go through the following steps:

Ensure your network interface is listed and enabled, for example with ip-link(8)
(https://man.archlinux.org/man/ip-link.8):

# ip link

For wireless and WWAN, make sure the card is not blocked with rfkill.
Connect to the network:
Ethernet—plug in the cable.
Wi-Fi—authenticate to the wireless network using iwctl.
Mobile broadband modem—connect to the mobile network with the mmcli utility.
Configure your network connection:
DHCP: dynamic IP address and DNS server assignment (provided by systemd-
networkd and systemd-resolved) should work out of the box for Ethernet (htt
ps://gitlab.archlinux.org/archlinux/archiso/-/blob/master/configs/releng/ai
rootfs/etc/systemd/network/20-ethernet.network), WLAN (https://gitlab.a
rchlinux.org/archlinux/archiso/-/blob/master/configs/releng/airootfs/etc/sy
stemd/network/20-wlan.network) and WWAN (https://gitlab.archlinux.org/
archlinux/archiso/-/blob/master/configs/releng/airootfs/etc/systemd/netw
ork/20-wwan.network) network interfaces.
Static IP address: follow Network configuration#Static IP address.
The connection may be verified with ping:

# ping archlinux.org

4 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

Note: In the installation image, systemd-networkd, systemd-resolved, iwd and

ModemManager are preconfigured and enabled by default. That will not be the case for the
installed system.

Update the system clock

Use timedatectl(1) (https://man.archlinux.org/man/timedatectl.1) to ensure the

system clock is accurate:

# timedatectl set-ntp true

To check the service status, use timedatectl status .

Partition the disks

When recognized by the live system, disks are assigned to a block device such as /dev/sda ,
/dev/nvme0n1 or /dev/mmcblk0 . To identify these devices, use lsblk or fdisk.

# fdisk -l

Results ending in rom , loop or airoot may be ignored.

The following partitions are required for a chosen device:

One partition for the root directory / .

For booting in UEFI mode: an EFI system partition.

If you want to create any stacked block devices for LVM, system encryption or RAID, do it now.

Use fdisk or parted to modify partition tables. For example:

# fdisk /dev/the_disk_to_be_partitioned

Note:
Swap space can be set on a swap file for file systems supporting it.
If the disk from which you want to boot already has an EFI system partition, do
not create another one, but use the existing partition instead.

Example layouts

5 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

BIOS with MBR

Mount point Partition Partition type Suggested size

[SWAP] /dev/swap_partition Linux swap More than 512 MiB
/mnt /dev/root_partition Linux Remainder of the device

UEFI with GPT

Mount point Partition Partition type Suggested size

/mnt/boot or /mnt/efi EFI system
1 /dev/efi_system_partition At least 260 MiB
partition
[SWAP] /dev/swap_partition Linux swap More than 512 MiB
Remainder of the
/mnt /dev/root_partition Linux x86-64 root (/)
device

1. /mnt/efi should only be considered if the used boot loader is capable of loading the
kernel and initramfs images from the root volume. See the warning in Arch boot
process#Boot loader.

See also Partitioning#Example layouts.

Format the partitions

Once the partitions have been created, each newly created partition must be formatted with an
appropriate file system. For example, to create an Ext4 file system on /dev/root_partition ,
run:

# mkfs.ext4 /dev/root_partition

If you created a partition for swap, initialize it with mkswap(8) (https://man.archlinux.org

/man/mkswap.8):

# mkswap /dev/swap_partition

See File systems#Create a file system for details.

Note: For stacked block devices replace /dev/*_partition with the appropriate block device path.

Mount the file systems

Mount the root volume to /mnt . For example, if the root volume is /dev/root_partition :

# mount /dev/root_partition /mnt

Create any remaining mount points (such as /mnt/efi ) using mkdir(1) (https://man.archl
inux.org/man/mkdir.1) and mount their corresponding volumes.

6 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

If you created a swap volume, enable it with swapon(8) (https://man.archlinux.org/man/

swapon.8):

# swapon /dev/swap_partition

genfstab(8) (https://man.archlinux.org/man/genfstab.8) will later detect mounted

file systems and swap space.

Installation

Select the mirrors

Packages to be installed must be downloaded from mirror servers, which are defined in
/etc/pacman.d/mirrorlist . On the live system, after connecting to the internet, reflector
updates the mirror list by choosing 20 most recently synchronized HTTPS mirrors and sorting them
by download rate.[2] (https://gitlab.archlinux.org/archlinux/archiso/-/blob/master/confi
gs/releng/airootfs/etc/xdg/reflector/reflector.conf)

The higher a mirror is placed in the list, the more priority it is given when downloading a package.
You may want to inspect the file to see if it is satisfactory. If it is not, edit the file accordingly, and
move the geographically closest mirrors to the top of the list, although other criteria should be taken
into account.

This file will later be copied to the new system by pacstrap, so it is worth getting right.

Install essential packages

Use the pacstrap(8) (https://man.archlinux.org/man/pacstrap.8) script to install the

base (https://archlinux.org/packages/?name=base) package, Linux kernel and
firmware for common hardware:

# pacstrap /mnt base linux linux-firmware

Tip:
You can substitute linux (https://archlinux.org/packages/?name=linux) for a
kernel package of your choice, or you could omit it entirely when installing in a
container.
You could omit the installation of the firmware package when installing in a virtual
machine or container.

The base (https://archlinux.org/packages/?name=base) package does not include all

tools from the live installation, so installing other packages may be necessary for a fully functional
base system. In particular, consider installing:

userspace utilities for the management of file systems that will be used on the

7 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

system,
utilities for accessing RAID or LVM partitions,
specific firmware for other devices not included in linux-firmware (https://archl
inux.org/packages/?name=linux-firmware) (e.g. sof-firmware (https://archli
nux.org/packages/?name=sof-firmware) for sound cards),
software necessary for networking,
a text editor,
packages for accessing documentation in man and info pages: man-db (https://ar
chlinux.org/packages/?name=man-db), man-pages (https://archlinux.org/pack
ages/?name=man-pages) and texinfo (https://archlinux.org/packages/?name=
texinfo).

To install other packages or package groups, append the names to the pacstrap command above
(space separated) or use pacman while chrooted into the new system. For comparison, packages
available in the live system can be found in packages.x86_64 (https://gitlab.archlinux.org/ar
chlinux/archiso/-/blob/master/configs/releng/packages.x86_64).

Configure the system

Fstab

Generate an fstab file (use -U or -L to define by UUID or labels, respectively):

# genfstab -U /mnt >> /mnt/etc/fstab

Check the resulting /mnt/etc/fstab file, and edit it in case of errors.

Chroot

Change root into the new system:

# arch-chroot /mnt

Time zone

Set the time zone:

# ln -sf /usr/share/zoneinfo/Region/City /etc/localtime

Run hwclock(8) (https://man.archlinux.org/man/hwclock.8) to generate

/etc/adjtime :

# hwclock --systohc

8 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

This command assumes the hardware clock is set to UTC. See System time#Time standard for
details.

Localization

Edit /etc/locale.gen and uncomment en_US.UTF-8 UTF-8 and other needed locales.
Generate the locales by running:

# locale-gen

Create the locale.conf(5) (https://man.archlinux.org/man/locale.conf.5) file,

and set the LANG variable accordingly:

/etc/locale.conf

LANG=en_US.UTF-8

If you set the keyboard layout, make the changes persistent in vconsole.conf(5) (https://
man.archlinux.org/man/vconsole.conf.5):

/etc/vconsole.conf

KEYMAP=de-latin1

Network configuration

Create the hostname file:

/etc/hostname

myhostname

Add matching entries to hosts(5) (https://man.archlinux.org/man/hosts.5):

/etc/hosts

127.0.0.1 localhost
::1 localhost
127.0.1.1 myhostname.localdomain myhostname

If the system has a permanent IP address, it should be used instead of 127.0.1.1 .

Complete the network configuration for the newly installed environment, that may include
installing suitable network management software.

Initramfs

9 of 10 2021-09-15, 12:28
Installation guide - ArchWiki https://wiki.archlinux.org/title/Installation_guide

Creating a new initramfs is usually not required, because mkinitcpio was run on installation of the
kernel package with pacstrap.

For LVM, system encryption or RAID, modify mkinitcpio.conf(5) (https://man.archl

inux.org/man/mkinitcpio.conf.5) and recreate the initramfs image:

# mkinitcpio -P

Root password

Set the root password:

# passwd

Boot loader

Choose and install a Linux-capable boot loader. If you have an Intel or AMD CPU, enable
microcode updates in addition.

Reboot
Exit the chroot environment by typing exit or pressing Ctrl+d .

Optionally manually unmount all the partitions with umount -R /mnt : this allows noticing any
"busy" partitions, and finding the cause with fuser(1) (https://man.archlinux.org/man/f
user.1).

Finally, restart the machine by typing reboot : any partitions still mounted will be automatically
unmounted by systemd. Remember to remove the installation medium and then login into the new
system with the root account.

Post-installation
See General recommendations for system management directions and post-installation tutorials
(like creating unprivileged user accounts, setting up a graphical user interface, sound or a touchpad).

For a list of applications that may be of interest, see List of applications.

Retrieved from "https://wiki.archlinux.org/index.php?title=Installation_guide&oldid=695114"

This page was last edited on 9 September 2021, at 07:56.

Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted.

10 of 10 2021-09-15, 12:28