Scribd
Upload
344 views1 page

FBI XL-2T Customer Instructions (Rev 9.14.09)

This document provides instructions for operating an FBI XL-2T Model alarm system, including how to arm the system to leave or stay on the premises, change codes, bypass zones, and disarm the system. Key steps include entering a 4-digit code to arm or disarm, pressing specific buttons to arm in stay or instant mode, and entering codes to make changes to master or user codes. The document concludes by noting the status lights and requesting users note which lights are on if calling for service.

Uploaded by

Robalsingh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
344 views1 page

FBI XL-2T Customer Instructions (Rev 9.14.09)

This document provides instructions for operating an FBI XL-2T Model alarm system, including how to arm the system to leave or stay on the premises, change codes, bypass zones, and disarm the system. Key steps include entering a 4-digit code to arm or disarm, pressing specific buttons to arm in stay or instant mode, and entering codes to make changes to master or user codes. The document concludes by noting the status lights and requesting users note which lights are on if calling for service.

Uploaded by

Robalsingh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FBI XL-2T Model Alarm Systems (rev. 9.14.

09)

To ARM the system and go AWAY To CHANGE a MASTER (User 01) code
1. Secure all doors and windows. 1. Press the CODE button.
• READY light should be lit 2. Enter the current 4-digit MASTER code.
2. Enter your 4-digit code. 3. Enter 01.
• ARMED light should be lit 4. Enter the new 4-digit MASTER code.
3. Immediately exit through a delay door.
To ADD / CHANGE / DELETE a USER code (max 12
To ARM the system and STAY in building users)
1. Secure all doors and windows. 1. Press the CODE button.
• READY light should be lit 2. Enter the current 4-digit MASTER code.
2. Press the STAY button. 3. Enter the desired 2-digit USER code (02-12)
3. Enter your 4-digit code. you wish to add, change, or delete.
• ARMED and STAY lights should be lit 4. Enter the new 4-digit USER code. (to delete an
(perimeter zones are active and interior zones existing code, press * for this step)
are now bypassed, allowing you to move around
inside) To BYPASS a ZONE
1. Press the BYPASS button.
To ARM the system in STAY / INSTANT mode. 2. Enter your 4-digit code.
1. Secure all doors and windows. 3. Press the 2-digit zone number (01, 02, up to 16)
• READY light should be lit you wish to bypass.
2. Press the STAY and INSTANT buttons. • Red light for bypassed zone should blink.
3. Enter your 4-digit USER code. 4. Arm the system.
• System is immediately ARMED
with NO DELAY.
• ARMED, STAY, and INSTANT
lights should be lit
(perimeter zones are active and interior zones
are now bypassed, allowing you to move around
inside)

To DISARM the system


1. Enter building through a delay door.
• Control station will sound to remind you to
disarm the system
2. Enter your 4-digit code.
• ARMED light should go off

PLEASE MAKE NOTE OF WHICH STATUS LIGHTS ARE ON BEFORE YOU CALL FOR SERVICE
WE ARE HERE LOCALLY WHEN YOU NEED US

You might also like