Scribd
Upload
2K views3 pages

Friction Slab and Crash Barrier Design

The document provides details on the design of a friction slab and crash barrier system. It includes dimensional details of the components, weights and center of gravity locations. It also calculates design loads from vehicles colliding with the crash barrier, including accidental load factors. Finally, it checks the design for overturning and sliding stability, determining additional sliding resistance needed and the steel reinforcement required.

Uploaded by

Alok verma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
2K views3 pages

Friction Slab and Crash Barrier Design

The document provides details on the design of a friction slab and crash barrier system. It includes dimensional details of the components, weights and center of gravity locations. It also calculates design loads from vehicles colliding with the crash barrier, including accidental load factors. Finally, it checks the design for overturning and sliding stability, determining additional sliding resistance needed and the steel reinforcement required.

Uploaded by

Alok verma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
  • Design of Friction Slab

DESIGN OF FRICTION SLAB

1 Dimensional details of Friction slab and crash barrier


A
0.45

0.050 0.175 0.225

0.75
1.100 2
6

1 0.05 0.25
3
0.10
4
0.260 1.350
0.05 3' 0.290
1'
0.350
2'
0.290
0.120
2.500
A

2 Crash Barrier

Area No. Area C.G from right end of CB


1 0.028 0.42
2 0.019 0.21
3 0.022 0.12
4 0.013 0.20
5 0.023 0.11
6 0.193 0.31

Wt. of Crash Barrier = 0.739063 t/m


Distance of C.G from A-A = -0.191 m

3 Friction Slab and Capping

Area No. Area C.G from end


1' 0.042 2.44
2' 0.005 2.36
3' 0.725 1.25
Wt. of Frictional Slab = 1.931 t/m
Distance of C.G from A-A = 0.768 m

2 Wt of Vehicle at time of collission

Considering 50% of wheel load = 0.75 t


Distance of C.G from A-A = 0.5 m

3 Vehicle collision force

Vehicle Impact = 1.57 t/m


Destablizing Moment = 2.25 tm/m

4 Accidental Load Factors


Type Forces Moment L.F Fact. F Fact. M
C.B 0.74 -0.141 1 0.7 -0.1
F.S 1.93 1.482 1 1.9 1.5

Veh. Load 0.75 0.375 0 0.0 0.0


Coll. load 1.57 1.633 1 1.6 2.3

5 Check for Overturning

FOS overturning = 0.66 Revise

6 Check for Sliding

FOS sliding = 0.85 Check with dowel bars

Additional Sliding force = -0.235 t/m

Permissible ts. strength = 275 N/mm2

Area of steel req = 8.55 mm2/m

Ast provided = 12 250 452 mm2/m


0 250

Development length

Ld = 429.1 mm for HYSD bars


total length = 858.1 mm

Checked with maximum stress (500/1.15n/mm2)which is greater than stress applied

You might also like