Back Pressure Check Valves
General Information
RegO Back Pressure Check Valves are designed to allow flow in one Metal-to-metal seats will allow slight leakage after closure. These
direction only. The check, normally held in the closed position by a valves will restrict the escape of container contents in the event of
spring, precludes the possibility of flow out of the container. When accidental breakage of the piping or fittings.
flow starts into the container, the pressure overcomes the force of
the spring to open the check. When the flow stops or reverses, the
check closes.
Back Pressure Valves for Container or Line Applications
3146 Series, 3176 Series, A3186, A3187S, A3196, and A3276BC
Application
Designed to provide protection of a container opening when desired
flow is always into the vessel. May be used in line applications where
flow must be limited to one direction.
When used with the appropriate single check filler valve, the
combination forms a double check filler valve suitable for use in filling
of bulk storage tanks.
Features
• Generous flow channels for low pressure drop.
• Heavy-duty construction for long service life. 3146 Series, 3176 Series, A3186, A3196
• Soft seat valves have synthetic rubber seat disc for positive seals.
Materials
Body (3146, 3146S, 3176) ....................................................... Brass
Body (all others) ............................................ Cadmium Plated Steel
Disc (3146, 3146S, 3176) ......................................................... Brass F
Disc (all others) ............................................. Cadmium Plated Steel
Stem (3146, 3146S, 3176) ....................................................... Brass
Stem (A3146, A3196, A3276BC) ............................... Stainless Steel
Stem (A3176, A3186) .................................... Cadmium Plated Steel
Spring ........................................................................ Stainless Steel
Seat Disc (3146S, A3276BC) ................................ Synthetic Rubber A3276BC
Effective Length
PRODU
GO C
10
RE
TS
(2"-11.5 NPTF THD) (2"-11.5 NPTF THD)
Y
10
NT
EA
Y
R WA R R A
FLOW
(3"-8 NPTF THD)
8.209 (3.500 HEX)
A3198S A3187S
Container Service Installation
Typical Installation
3146, A3146, 3146S, 3147S, A3276BC, 3176, A3176, A3186, A3196
100 RegO Dr. Elon, NC 27244 USA [Link] +1 (336) 449-7707 F29
Back Pressure Valves for Container or Line Applications
3146 Series, 3176 Series, A3186, A3187S, A3196, and A3276BC
A3187S Container Service A3187S Pipe Line Service
Ordering Information
Part Number A B D Propane Liquid Capacity at various differential pressures (GPM)
C
Inlet Outlet Effective
Wrench Hex
Brass Steel Connection Connection Length 5 PSIG 10 PSIG 25 PSIG 50 PSIG
Flats
F. NPT M. NPT (approx.)
3146 A3146
¾” ¾” 1⅜” 115/16” 11 16 25 36
3146S*
3176 A3176 113/32” 28 40 63 89
1¼” 1¼” 2”
A3276BC* 2⅛” 32 45 73 103
A3186 2” 2” 3” 2⅜” 124 175 276 391
A3187S* 2” M & 2” M &
2⅜” 127/32” 60 110 225 350
** 1¼” F 1¼” F
A3196 3” 3” 4” 37/32” 297 420 664 939
A3198S*
**
3” M & 2” F 3” M & 2” F 3½” 3¼” 210 290 400
*Soft seat version.
**The 1¼” and 2” outlet connections are for a standpipe when installed inside of a container.
F NOTE: Multiply flow rate by .94 to determine liquid butane capacity and by .90 to determine liquid anhydrous ammonia capacity.
Swing-Away Back Pressure Check Valves for Container or Line Applications
6586D and A6586D
Application
Designed to provide protection of a container opening when
desired flow is always into the vessel. May also be used in the line
applications where flow must be limited to one direction.
When used with the appropriate single check filler valve, the
combination forms a double check filler valve suitable for use in filling
of bulk storage tanks.
The swing-away check offers more efficient flow rates than
conventional designs. It swivels open vertically to reduce pressure
drop across the valve and improves flow rates.
6586D
Features
• Swing-away check design offers faster flow rates. Materials
PRODU Body (6586D) .......................................................................... Brass
• Heavy-duty construction for long service life. GO C
Body (A6586D) ......................................................................... Steel
10
RE
TS
Disc ............................................................................ Stainless Steel
Stem Assembly ...........................................................Stainless Steel
Y
Spring ........................................................................ Stainless Steel
10
NT
EA Screw .........................................................................Stainless Steel
Y
R WA R R A
Ordering Information
Part Number Propane Liquid Capacity at Various Differential Pressures (GPM)
A. B. C. D.
Inlet Connection Outlet Connection Wrench Effective Length
Brass Steel F. NPT M. NPT Hex Flats (Approx.) 5 PSIG 10 PSIG 25 PSIG 50 PSIG
6586D 2¾”
2” 2” 21⁄32” 190 270 420 600
A6586D 2⅞”
NOTE: Multiply flow rate by .94 to determine liquid butane capacity.
F30 100 RegO Dr. Elon, NC 27244 USA [Link] +1 (336) 449-7707
