3516B Marine Auxiliary Engine S2R00001-UP(SEBP3920 - 17) - Document Structure Page 1 of 4
Shutdown SIS
Previous Screen
Product: MARINE ENGINE
Model: 3516B MARINE ENGINE S2R
Configuration: 3516B Marine Auxiliary Engine S2R00001-UP
Operation and Maintenance Manual
3500B Series II Marine Auxiliary Engines
Media Number -SEBU7845-03 Publication Date -01/06/2005 Date Updated -14/06/2005
i02360383
Maintenance Interval Schedule
SMCS - 1000; 4450; 7500
Operating conditions, fuel type, oil type and size of the oil sump will affect the oil change interval.
Scheduled oil sampling analyzes used oil in order to determine if the oil change interval is suitable
for your specific engine.
In the absence of scheduled oil sampling, change the engine oil and filters according to the
following intervals:
Engines with a Shallow Oil Sump - Every 250 Service Hours
Engines with a Standard Oil Sump - Every 500 Service Hours
Engines with a Deep Oil Sump - Every 1000 Service Hours
Refer to this Operation and Maintenance Manual, "Engine Oil and Filter - Change" in order to
determine the oil change interval that is suitable for your specific engine.
Note: To determine the maintenance intervals for the overhauls, refer to this Operation and Maintenance
Manual, "Overhaul Considerations" .
Note: Ensure that the safety information, warnings, and instructions are read and understood before
operation or maintenance procedures are performed.
Note: Use the following criteria, whichever occurs first , in order to determine the maintenance
intervals: service hours and calendar time . Engines that operate in severe operating conditions may
require more frequent maintenance.
Before each consecutive interval is performed, all of the maintenance requirements from the previous
interval must also be performed.
When Required
[Link] 19.09.2005
3516B Marine Auxiliary Engine S2R00001-UP(SEBP3920 - 17) - Document Structure Page 2 of 4
Batteries - Replace
Battery or Battery Cable - Disconnect
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Air Cleaner Element (Single Element) - Clean/Replace
Fuel System - Prime
Heat Exchanger - Inspect
Sea Water Strainer - Clean/Inspect
Zinc Rods - Inspect/Replace
Daily
Air Starting Motor Lubricator Oil Level - Check
Air Tank Moisture and Sediment - Drain
Cooling System Coolant Level - Check
Driven Equipment - Inspect/Replace/Lubricate
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel Tank Water and Sediment - Drain
Instrument Panel - Inspect
Walk-Around Inspection
Initial 250 Service Hours
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Speed Sensor - Clean/Inspect
Every 250 Service Hours
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Cooling System Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Hoses and Clamps - Inspect/Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Engine Oil and Filter - Change
Every 1000 Service Hours
Engine - Clean
[Link] 19.09.2005
3516B Marine Auxiliary Engine S2R00001-UP(SEBP3920 - 17) - Document Structure Page 3 of 4
Engine Crankcase Breather - Clean
Engine Oil and Filter - Change
Engine Protective Devices - Check
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Every 2000 Service Hours
Air Starting Motor Lubricator Bowl - Clean
Crankshaft Vibration Damper - Inspect
Engine Mounts - Check
Turbocharger - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 3 Years
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Every 4000 Service Hours
Auxiliary Water Pump - Inspect
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Every 6000 Service Hours or 6 Years
Air Starting Motor - Inspect
Alternator - Inspect
Cooling System Water Temperature Regulator - Replace
Prelube Pump - Inspect
Speed Sensor - Clean/Inspect
Starting Motor - Inspect
Water Pump - Inspect
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Overhaul
Aftercooler Core - Inspect/Clean
Overhaul (Major)
Overhaul (Top End)
Overhaul Considerations
[Link] 19.09.2005
3516B Marine Auxiliary Engine S2R00001-UP(SEBP3920 - 17) - Document Structure Page 4 of 4
Copyright 1993 - 2005 Caterpillar Inc. Mon Sep 19 [Link] UTC+0200 2005
All Rights Reserved.
Private Network For SIS Licensees.
[Link] 19.09.2005
