ON/OFF Grid High frequency Hybrid Solar Inverter Solar Power System

PH1000 Series (3.6-5KW)

Specification

MODEL PH10-3648A PH10-4248A PH10-4648A PH10-5048A

Features
RATED POWER(W) 3600 4200 4600 5000
• Wide range of MPPT voltage:120-550V
Nominal Battery System Voltage 48 48 48 48
• Multiple operation modes: Grid-tie,off grid and grid-tie with back up Maximum recommended DC power(W) 4100 4800 5300 5750
• Support LCD display&Smart LCD setting Nominal DC operating voltage(V) 360

• Available Export control CT sensor function Maximum DC voltage(V) 580

PV MPPT voltage range(V) 120~550

• Multiple communications:USB,RS485,GPRS and wifi etc.
INPUT(DC) Maximum input current(A) 11/11
• Monitoring inverters Freely Via computers or mobile phones
Maximum short circuit current(A) 15/15
• Full protection function:Over-voltage,over-frequency, over-current, No.of MPP tracker 2
over-temperature,and AC short-circuit automatic protection
Strings per MPP tracker 1
• Intelligent BMS battery management function Nominal AC output power(W) 3600 4200 4600 5000
• Fanless low-noise design. Nominal output voltage(V);range(V) 220\230\240;180-280
• IP65 Dust-proof and water-proof AC grid frequency(Hz);range(Hz) 50\60;45~55\55-65

INVERTER Nominal output current(A) 15.7 18.3 20.0 21.8

OUTPUT(AC) Maximum output current(A) 16.4 19.1 21.0 22.8
Total harmonic distortion i(THDi) <3%
Introduction
Power factor at rated power 1
This is a flexibly and intelligent energy storage solar inverter with wide range of MPPT Voltage. Displacement power factor 0.8leading ～ 0.8lagging
Combining functions of off grid and on grid. This hybrid solar inverter can power all kinds of appliances in home or office, also can use in power station. Output Rated Power 2300
Nominal output voltage(V);accuracy range 230±1%

BATTERY Output ferequency(Hz);accuracy range 50/60(optional)±0.2%

MODE OUTPUT(AC) Output rated current(A) 10
Back panel printing description Solar system connection
Output waveform Pure sine wave
Total harmonic distortion v (linear load) <3%
Battery type Lead-acid battery \ Lithium battery
1 2 SOLAR PANELS
Battery voltage(V) 48
1. The inverter operation status indicator
Battery voltage range(V) 40~60
BATTERY
2. Battery indicator & Charging curve 3-stage adaptive with maintenance
3. WiFi status indicator CHARGER
Over-current protection / Over-temperature protection Yes \ Yes
4. Fault indicator Laptop Maximum charging/discharging power(W) 2500 2500
4 3 Maximum charging/diacharging currernt(A) 50 \ 50
Maximum efficiency 97.3%
Lighting
EFFICIENCY Euro-efficiency 96.8%

AC OUTPUT MPPT efficiency 99.9%

5 6 7 8 9 10
DC switch rating for each MPPT Yes
Air-conditioner
Grid monitoring Yes

PROTECTION Output over current protection Yes

TV
DEVICES Output overvoltage protection-varistor Yes
ELECTRIC
METER Ground fault monitoring Yes
Integrated all-pole sensitive leakage current Yes
Fans
Dimension(W/H/D)(mm) 480*420*215
BATTERY
(optional)
Net weight (kg) 25 25 27 27

DC connection H4 / MC4
GRID
AC connection Terminal Block
5. PV input terminals
Display LED+LCD
6. Battery input terminals and cover
GENERAL Communication interfaces Wi-Fi \ USB \ GPRS \ RS485
7. PV input switch
Ingress protection rating IP65
8. BTS terminals, BMS terminals, load monitor terminals,
Humidity 0~95% RH(No codensing)
dry contact terminals, CAN communication terminals,
Operating temperature range -20℃ +60℃ With derating above 45℃
USB terminal and cover
Cooling concept Natural
9. Wi-Fi commodule
Altitude <2000m
10. AC output terminals and cover

-1- -2 - Made in China