S UPER
WELCOME TO FUTURE THE
World’s 1st 3D Wheel Aligner for Multi-Axle Trucks, Buses & Trailers
WELCOME TO FUTURE in Multi-axle Alignment
THE
Measure all 5 axles under 3 min.
One shot Runout compensation of all 5 axles
MANATEC
l
TM
One shot Caster swing for twin steer axles
l
Partners in Progress
Ideal for all workshops, tyre shops & OEM end of line requirements
l
S UPER
WELCOME TO FUTURE THE
Jumbo 3D Super supplied with 10 targets and integrated
wheel brackets enables the user to measure results
of all 5 axles simultaneously.
nOne shot Runout compensation of all 5 axles
nOne shot caster swing for twin steer axles
nQuick results, high productivity
nLess labour cost
Innovative Image Processing
Technology
Jumbo 3D uses latest, innovative, digital-imaging
technology by deploying quad camera system for data-
Powered by
acquisition. High resolution digital cameras, two per side,
operate with intelligent software & capture seamless
images of targets
Sample Vehicle Configuration
Get Alignment results of all 5 axles under 3 minutes
2 min 50 sec
01 02
60 sec 110 sec
One shot Runout Compensation One shot Caster swing of twin steer axles
03 2 mins 50 sec
Get alignment results of
3 axles in just 2 mins!!
All results in one screen
S UPER
WELCOME TO FUTURE THE
No Electronics on wheels 1st in the World
One shot Runout Compensation of all 5 axles
nNo expensive service bills due to accidental Runout
n carried out by driving the vehicle
drop of electronic sensors
nNo sensor calibration issues Alignment
n completed within 1/3rd the time of conventional methods
nNo battery discharge issues No need
n to remove and refix the clamps and targets for each axle
nCompact and light weight No Jacking
n up of wheels
No need
n for vehicle pusher
One Shot Caster swing for twin axles Enormous
n time saving and productivity increased
Universal Wheel Bracket
Suitable for 12” – 24”rim diameter.
Inner : 12” – 20”
Caster
n swing can be performed for twin steer
axles simultaneously Outer : 16” – 24”
4 nos Rotary plates supplied as standard accessory
n
No need to remove and refix the targets for each axle
n
OPTIONAL
Increases productivity
n
Wheel Bracket
adapter upto 26”
Parallelism Adjustment
Tubeless Rim Tube Rim &
& Alloy Rim Flat Rim
Double end rim locking pins Universal pin adaptor serves as extender
for operating on steel and alloy wheels for using the pins for protruding rims
Single Axle adjustment
Thrust angle adjustment in a single axle
vehicle is a tedious job using
conventional trial & error method.
Alignment of Front twin steerable axles Single axle adjuster tool helps in
to maintain parallel condition effortlessly adjusting the thrust angle
precisely.
Saves considerable time and energy.
Thrust / Scrub Angle Adjustment
Smart Control (Optional)
Tablet operation
Highly user-friendly Wi-Fi enabled
tablet & Mobile device to display
alignment results & to operate the
PC from the Alignment bay. Avoids
multiple trips to the PC console.
Alignment of Rear multi axles
S UPER
WELCOME TO FUTURE THE
Mobile stands Technical Specifications
for storing Wheel brackets & Targets Measurement parameters Range Accuracy
Camber (Front / Rear) ± 15° 00' ± 00° 02’
Caster ± 28° 00' ± 00° 05’
4 Mobile
n stands provided Kingpin Inclination ± 25° 00' ± 00° 05’
for storing Wheel brackets
Toe (Front / Rear) ± 20° 00' ± 00° 02’
& Targets, 2 on each side
Easy access to technicians
n Total Toe ± 40° 00' ± 00° 04’
Saves multiple trips
n Setback (Front / Rear) ± 25 mm ± 2 mm
Scrub / Thrust angle ± 10° 00' ± 00° 02’
Runout ± 10° 00' ± 00° 02’
Dual Monitor Included angle ± 40° 00' ± 00° 05’
Track width difference ± 150 mm ± 2 mm
Toe Out on Turns ± 20° 00' ± 00° 20’
Lock angle ± 60° 00' ± 00° 20’
Additional monitor for
Power supply 230V AC, 50Hz / 110V AC, 60Hz
operator convenience to
view from the pit. Power 250W
Operating temperature 0º - 50ºC
Standard Accessories
nWheel brackets(12"-24") 10 Nos.
nTarget plates 10 Nos.
nRotary plates (7 ton) 4 Nos.
nSteering lock 1 No.
nBrake pedal lock HCV 1 No.
nBrake pedal lock LCV 1 No.
nAdaptor for rim locking pins 40 Nos.
nPC console with Windows embedded OS,
Key board & Mouse 1 No.
Alignment Result Printout nLED monitor (21.5") HDMI interface 1 No.
nLED monitor secondary (21.5") VGA interface 1 No.
nTarget stands (2Tx2, 3Tx2) 4 Nos.
nRemote 1 No.
nTruck alignment & Data manager software 1 No.
nSingle axle adjuster 1 No.
nWheel stoppers 2 Nos.
Optional Accessories
nWheel bracket extension adaptors 40 Nos.
nFrame offset gauge 1 No.
nTyre dia guage 1 No.
nPrinter 1 No.
n4 shaft calibration kit (HCV) 1 No.
Car Kit (Optional)
nRim locking pins (for Runflat tyre rims & Fancy disc) 16 Nos.
nRim locking pins (for Standard & Steel rims) 16 Nos.
nCar alignment & Vehicle data software 1 No.
MANATEC
WA - 3D - ML - 6 Page (Code : SC 1013)
C-22 & 23, Industrial Estate, Thattanchavady, Pondicherry - 605 009. INDIA.
Toll Free Help Line
[email protected]. +51 988 886 214
1800-425-2080
Rights of design & specification changes reserved. www.manatec.in Version - 1.1 March 2017
