Scribd
Upload
128 views1 page

Modular Substation Design Guidelines

The document discusses requirements for protection systems, control systems, and low voltage AC (LVAC) systems in modular substations. Some key points: - Protection systems may need to communicate with remote equipment and requirements need to be identified early in the design process. Owners will determine final protection requirements. - Control systems are necessary for local and remote monitoring of equipment status and operation. There may be multiple control systems depending on ownership boundaries. Not all information from protection systems needs to feed into control systems. - LVAC is required to power protection and control equipment as well as site lighting. Requirements for LVAC systems include complying with regulations, having both a primary and reserve power source, and the owner

Uploaded by

InstructorHany Shaltoot
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views1 page

Modular Substation Design Guidelines

The document discusses requirements for protection systems, control systems, and low voltage AC (LVAC) systems in modular substations. Some key points: - Protection systems may need to communicate with remote equipment and requirements need to be identified early in the design process. Owners will determine final protection requirements. - Control systems are necessary for local and remote monitoring of equipment status and operation. There may be multiple control systems depending on ownership boundaries. Not all information from protection systems needs to feed into control systems. - LVAC is required to power protection and control equipment as well as site lighting. Requirements for LVAC systems include complying with regulations, having both a primary and reserve power source, and the owner

Uploaded by

InstructorHany Shaltoot
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Guidance Modular Substation Functional

Document
Requirements
Classification: Public Uncontrolled if printed Rev: 1.0

4.9.2.5 Protection systems may also need to communicate reliably with remote ends
or equipment outside the modular substation perimeter. The requirements of
the protection system need to be identified and accommodated at the
desk-top design phase. The final protection and control requirements will be
at the Owner’s discretion.

4.9.2.6 The protection systems will require LVAC power.

4.9.2.7 The protection systems are comprised of a large volume of wiring in and out
of control blocks. Methods to enable the wiring to be plugged in and out
should be investigated.

4.9.4 Control Systems

4.9.4.1 Control systems are necessary to allow both local and remote view of the
equipment status and operation of the equipment.

4.9.4.2 There may be more then one control system necessary at the modular
substation. The number of control systems will be determined based on
ownership and operational boundaries agreed. Separation of the control
systems may also be necessary if an element of the modular substation is
envisaged as being sold in the future.

4.9.4.3 Control systems may require a view of information from equipment outside
the modular substation.

4.9.4.4 Not all of the information from the protection systems or monitoring
instrumentation needs to feed into the control systems.

4.9.4.5 The control systems will require LVAC power prior to and post fault
conditions, as it is essential to the system to be maintained as long as
possible.

4.9.4.6 The control system will require a communication pathway for the information
to leave site or instructions to be received. There are different options with
regards to the communication pathway and it is prudent to consider installing
a secondary communication pathway. This will be at the Owner’s discretion.

4.10 LVAC and batteries

4.10.1 LVAC systems

4.10.1.1 Low voltage AC is required for a number of reasons within the modular
substation site from powering the protection and control equipment to
providing the lighting for the enclosures. To calculate the size of the LVAC
board all known maximum LVAC power requirements for the site must be
combined as well as any known future extensions.

4.10.1.2 The LVAC systems onsite should as a minimum comply with the applicable
UK regulations.

4.10.1.3 There are options surrounding the source of primary power for the LVAC
board. As well as a primary source of power, as a minimum a single reserve
power source is also required. The incoming power to the LVAC board may
require fiscal metering. It will be at the Owner’s discretion the source of

Page 19 of 50

You might also like