Document Title Document Number:
SPCL-JOYVILLE-WMS-11
METHOD STATEMENT FOR ANTI-CORROSION PAINT
APPLICTION Status: Issued for
Revision: 00
Construction
Document Type: WMS Revision Date: - 08-07-2021
Name of Project – JOYVILE HADAPSAR ANNEX
Page. 1 of 2
CLIENT- JOYVILLE SHAPOORJI HOUSING PVT. LTD.
WORK METHOD STATEMENT
ACTIVITY WMS FOR ANTI-CORROSION PAINT APPLICTION
PREPARED BY REVIEWED BY REVIEWED BY REVIEWED BY
REV DATE REVISION
SPCPL SPCPL SPCPL SPCPL
08-
Issued for
00 JULY-
Approval
2021
Designation/Department: Planning Execution Quality Project Manager
Signature:
Date:
REV DATE REVISION REVIEWED BY REVIEWED BY REVIEWED BY APPROVED BY
JSHPL JSHPL JSHPL JSHPL
08-
Issued for
00 JULY-
Approval
2021
Project
Designation: Planning Execution Quality
Manager
Signature:
Date:
Rev. Index Revision Description
00 Issued for Construction
“This document is the property of Shapoorji Pallonjico.pvt.ltd. It must not be reproduced or transmitted to others without written authorization from the
Company"
SPCLI-JOYVILLE-WMS-11_00.doc
Document Title Document Number:
SPCL-JOYVILLE-WMS-11
METHOD STATEMENT FOR ANTI-CORROSION PAINT
APPLICTION Status: Issued for
Revision: 00
Construction
Document Type: WMS Revision Date: - 08-07-2021
Name of Project – JOYVILE HADAPSAR ANNEX
Page. 2 of 2
Introduction:
Ac-corroguard is a specially formulated corrosion inhibitor solution to increase chloride threshold value,
reducing corrosion rate, thereby minimizing the corrosion & ensuring life of reinforcement structure. AC-
CORROGUARD, corrosion inhibitor, is mixed type of inhibitor solution which retards anodic as well as
cathodic reactions and forms an impervious layer on metal surface. The slurry is truncated inhibitor
cement slurry for protection of corrosion.
USE:
Ac-corroguard is used for the protection of reinforcement bars before concreting.
Reference:
IS-9077
Procedure:
Remove all loose rust if any on the rebar by using wire brush.
The treatment shall be given to reinforcement only after cutting and bending the same.
Make a slurry of cement by adding inhibitor solution to OPC in the ratio of 0.5 to 0.6: 1 (Inhibitor
solution: OPC cement)
Apply uniform coat of slurry on surface of reinforcement, iron, and steel by brushing or dipping.
Keep coated bars for drying on the drying platform.
SAFETY PRECAUTION:
HEALTH AND SAFETY
Ac-corroguard is non-toxic. Any splashes to the skin should be washed immediately with water. Splashes to
the eyes should be washed immediately with water and medical advice should be sought.
“This document is the property of Shapoorji Pallonjico.pvt.ltd. It must not be reproduced or transmitted to others without written authorization from the
Company"
SPCLI-JOYVILLE-WMS-11_00.doc