TECHNICAL DATA SHEET
Reflect Mirror Finish
As the original “aluminum composite material,” ALUCOBOND®
PLUS has been developed exclusively to allow architects and
designers to meet the fire performance requirements of today’s
building standards while using ACM as the material of choice.
Consisting of two sheets of smooth .020” aluminum thermo-
bonded to a solid, fire retardant core, ALUCOBOND PLUS is
one component of the assembly that meets the requirements of fire
classifications while offering the proven product properties such as
flatness, form-ability, durability and ease of fabrication.
The versatile characteristics of ALUCOBOND PLUS provide for
a plethora of applications such as exterior and interior cladding,
column covers, canopies, soffits and even signage, allowing
architects to offer inspiring, creative, and innovative designs while
meeting the standards of sustainable planning.
The following technical data pertains to the ALUCOBOND
PLUS Reflect Mirror finish from the Natural Collection Element
Series.
MATERIAL PROPERTIES PANEL SURFACE
Panel Thickness: 4mm (0.156”) Front Side: Anodized aluminum coated with
a transparent, UV resistant coating
Aluminum Skin (Front): 0.020”
Total Reflection: 84 - 85%
Aluminum Skin (Reverse): 0.020”
Gloss: ≥ 78%
Standard Width: 49.2”
Reverse Side: Mill Finish (Aluminum)
Weight/Area: 1.56 lb/ft²
TECHNICAL PROPERTIES THERMAL & ACOUSTICAL PROPERTIES
Section Modulus W: 0.033 in³/ft Thermal Resistance: 0.16 ft²•°F•h/BTU
(R-Value)
Rigidity: 2500 lbf•in²/ft
Heat Transition Coefficient: 6.25 ft²•°F•h/BTU
Modulus of Elasticity: 10 psi
(U-Value)
Tensile Strength of Aluminum: 19 kpsi
Linear Thermal Expansion: 0.029 in/ft over a 212°F ∆T
0.2% Proof Stress: 13 kpsi
Application Range: -60°F to 180°F
Core: Mineral filled
Sound Absorption Factor (αS): 0.05
polymer
Sound Transmission Loss (RW): STC: 30dB / OITC: 24dB
To download PDF or AutoCAD details and specifications, visit our website at www.alucobondusa.com
Information contained herein, or related to, is intended for use at one’s own discretion. Such information is believed to be reliable, but 3A Composites shall
have no responsibility or liability for results obtained or damages resulting from such use. 3A Composites USA, Inc. does not make any warranties, expressed
or implied.
ALUCOBOND® is a registered trademark of 3A Composites USA Inc.
© 2020 3A Composites USA. All Rights Reserved. ALUCOBONDUSA.COM / 800.626.3365
