Introduction to Abrasive Machining and Finishi... https://onlinecourses.nptel.ac.in/noc18_me70/un...
[email protected] ▼
Courses » Introduction to Abrasive Machining and Finishing Processes
Announcements Course Ask a Question Progress Mentor FAQ
Unit 5 - Week
3: Honing, Lapping and Super finishing
Course
outline
Week 3: Assignment
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-09-05, 23:59 IST.
the portal assignment.
Practise 1) In case of honing, the tool used is made in the form of ? 1 point
Assesment
Cylinder
Week 1:
Introduction to Sticks
Conventional
Round
Abrasive
Processes Cube
Week 2: No, the answer is incorrect.
Sustainable Score: 0
Grinding
Accepted Answers:
Process
Sticks
Week 3: Honing, 2) Honing is capable of removing the stock upto ? 1 point
Lapping and
Super finishing
0.25 mm
Honing Process
0.50 mm
Lapping
0.75 mm
Process
Super Finishing 1.00 mm
and Sand
No, the answer is incorrect.
Blasting
Score: 0
Quiz : Week 3:
Accepted Answers:
Assignment
0.75 mm
Week 4: 3) Apart from honing machine, the honing operation can be carried out on ? 1 point
Abrasive Mass
Finishing
Operations & Drilling machine
Surface Integrity
Lathe machine
in Abrasive
Process
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
A project of In association with
Funded by
1 of 3 Tuesday 16 October 2018 06:55 PM
Introduction to Abrasive Machining and Finishi... https://onlinecourses.nptel.ac.in/noc18_me70/un...
4) The allowance on diameter
Powered by or thickness for general lapping work is 1 point
Week 6: Hybrid
Abrasive
Machining 0.001 mm to 0.015 mm
Processes
0.015 mm to 0.05 mm
Week 7: 0.05 mm to 0.075 mm
Advanced
Abrasive 0.075 mm to 0.1 mm
Finishing
Processes-1 No, the answer is incorrect.
Score: 0
Week 8: Accepted Answers:
Advanced 0.015 mm to 0.05 mm
Abrasive
Finishing 5) Lapping is not suitable for 1 point
Processes-2
Copper
Lead
Tungsten
Brass
No, the answer is incorrect.
Score: 0
Accepted Answers:
Tungsten
6) The operation of running two mating parts or shapes together with an abrasive between 1 point
them
Machine Lapping
Form Lapping
Hand Lapping
Equalizing Lapping
No, the answer is incorrect.
Score: 0
Accepted Answers:
Equalizing Lapping
7) When the primary requirement is only the high degree of surface finish, and a very close 1 point
dimensional accuracy is the primary requirement, we can use the following operation(s) ?
Honing
Buffing
Lapping
All of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Lapping
8) By super finishing operation upto _____ mm can be removed. 1 point
0.025
0.050
0.075
2 of 3 Tuesday 16 October 2018 06:55 PM
Introduction to Abrasive Machining and Finishi... https://onlinecourses.nptel.ac.in/noc18_me70/un...
0.095
No, the answer is incorrect.
Score: 0
Accepted Answers:
0.025
9) The abrasive used in Super finishing is/are ? 1 point
Coated abrasive
Bonded abrasive
Both (A) and (B)
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Bonded abrasive
10)Use(s) of sand blasting is/are : 1 point
Improve surface finish
Improve fatigue strength
Both (A) and (B)
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Both (A) and (B)
Previous Page End
3 of 3 Tuesday 16 October 2018 06:55 PM
