Scribd
Upload
597 views3 pages

IQ MK 3 Range Actuators - Module 20C (WIQ82651)

This workshop and spare parts manual provides information on IQ Mk 3 range actuators, module 20C HMI PCB assembly, and covers all mechanical sizes. The document outlines that module 20C consists of an HMI PCB and wiring loom assembly and warns that printed circuit boards contain static sensitive devices and should be handled by the edges or while wearing an anti-static strap connected to ground. It advises including full details from the actuator nameplate when inquiring about or ordering spare parts.

Uploaded by

SuAnand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
597 views3 pages

IQ MK 3 Range Actuators - Module 20C (WIQ82651)

This workshop and spare parts manual provides information on IQ Mk 3 range actuators, module 20C HMI PCB assembly, and covers all mechanical sizes. The document outlines that module 20C consists of an HMI PCB and wiring loom assembly and warns that printed circuit boards contain static sensitive devices and should be handled by the edges or while wearing an anti-static strap connected to ground. It advises including full details from the actuator nameplate when inquiring about or ordering spare parts.

Uploaded by

SuAnand
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

IQ Mk 3 Range Actuators

Module 20C HMI PCB Assembly


Workshop and Spare Parts Manual

All Mechanical Sizes

Keeping the World Flowing


PUB002-047-00 Issue 10/16

Workshop and Spare Parts Manual


IQ Mk 3 Range Actuators
Module 20C HMI PCB Assembly
All Mechanical Sizes

3
PUB002-047-00 Issue 10/16

Workshop and Spare Parts Manual


IQ Mk 3 Range Actuators
Module 20C HMI PCB Assembly
All Mechanical Sizes

Module 20C
Consists of the following:
HMI PCB and Wiring Loom Assembly.

Module 20C HMI PCB Assembly and Loom

PRINTED CIRCUIT BOARDS HAVE STATIC SENSITIVE DEVICES,


AVOID TOUCHING THE BOARD, ALWAYS HANDLE BY THE EDGES.
It is recommended that anti-static bonding straps or bracelets
connected to a suitable earth point are used.

Full details from the actuator nameplate must be given when enquiring about or ordering spare parts

You might also like