The Hand Strap Clutch
A free sewing pattern and tutorial
by Ceri Staziker
Recently I’ve been seeing more and more clutch bags with hand
straps and think they look so good — and what a neat and practical
idea it is! I wanted to try and make my own version and came up
with this quick and easy pattern. It’s a compact clutch but easily
accommodates all of your essentials.
Dress it up or down with your choice of fabric and a fun zip-pull.
I designed it to be made with Spoonflower’s faux suede, but any
medium-weight fabric will work. Line it with cottton, satin or any
lightweight coordinating material.
The Hand Strap Clutch is also available as a cut and sew version.
You get the outer panels for two clutches on a fat quarter of faux
suede. You can buy this in my Spoonflower shop here:
http://www.spoonflower.com/designs/4672945
I’d love to see your interpretations of this pattern, so please share
your makes on Instagram with the hashtag #thehandstrapclutch
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
Requirements for one or two hand strap clutches
Fat quarter (27 x 18”) of faux suede or similar for outer panels
You will also need
one (or two) 8” zips
(and optional
tassels or hanging
zip decorations).
Regular fat quarter (21 x 18”) of quilting cotton or similar for lining
Heavy-weight iron-on
(fusible) interfacing for
outer panels (20 x 14”)
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT © Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
ACTUAL SIZE
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
PRINT PAGE AT
ACTUAL SIZE
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
The Hand Strap Clutch
Sewing instructions
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
Seam allowance is 1/2 an inch. If using faux suede, use a medium steam heat with your iron and
cover the fabric with a thin cloth to protect it.
1. Cut out all of the pattern pieces.
2. Iron the interfacing to the wrong side of the relevant outer panels.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
3. With right sides together, baste then machine sew along the long side of the
Hand Strap. Seam allowance is 1/2 inch. Remove basting and press open the seam
with a medium heat. Faux suede can be difficult to iron and I found that the steam
option helps. Be sure to protect your fabric with a thin cloth when pressing.
4.Turn the Hand Strap the right way round and press again.
5. With both right sides facing up, place the Hand Strap onto the Outer Middle
Front panel, 2 1/4 inches from the bottom edge. Baste together along both
sides. This is very important as you don’t want the strap to shift when you
come to machine sew the front panels together.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
6. With right sides together, place the Outer Left Front and Outer Right Front panels onto
the Outer Middle Front. Baste along outer edges and then machine sew. Remove basting.
7. Press open. Baste free ends of the Hand Strap to the outer edges of the completed
front panel. Trim off excess from the Hand Strap so that all edges are flush.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
8. Take both Zip Extensions, fold over each end 3/4 inch and press.
Then fold in half and press again. The creases should look like this.
9. Wrap the Zip Extensions around each end of the zip and machine sew in place.
10. Trim the Zip Extensions if they are wider than your zip. Also trim the bulk from
the seams at ends of the zip.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
11. With front panel face up, place the zip face down so that top edges align. Don’t
worry if your zip is now wider than the front panel. It will be trimmed later, just centre
it horizontally. Baste in place.
12. With right side facing down, place one of your lining pieces on top, aligning edges.
Baste in place along the zip edge, then machine sew. If you aren’t used to sewing zips,
make sure you start with your zip opened half way. Sew almost up to the zip pull, then
lower the needle, lift the foot, and pull the zip past the foot, away from you. Lower the
foot and continue machine sewing to the end.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
13. Remove the basting and press both outer panel and lining away from the zip.
14. Repeat for the Outer Back and remaining lining piece. Trim the Zip Extensions so
that all edges are flush. Both sides should look like this. If you want to top stitch along
the two seams you have just sewn, now is the time to do it. I don’t bother as I prefer a
cleaner finish with very few stitches visible.
15. It is very important to open the zip now, so that you are able to turn out the clutch
the right way after the final few steps — which are coming right up.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
16. With right sides together, match front and back outer covers, and both lining pieces.
Pin and baste. At the junction of the outer panels and lining, pinch the zip extensions so
that they protrude into the space between the lining layers. See below.
17. Machine sew around all edges, leaving a 4 inch gap at the bottom of the lining. Remove basting.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
18. Clip all corners and reduce bulk at the zip ends as shown below. Take the time to
press open all of the seams. Its worth putting the effort into this as it will really
improve the finish of your clutch bag. Turn bag the right way round through the
opening you left in the lining.
19. Hand sew closed the gap in the lining. You may or may not need to give the completed
bag a light press. Attach a tassel or decorative zip pull for a nice finishing touch.
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
#thehandstrapclutch
© Ceri Staziker 2015. cerigwen on spoonflower.com and instagram
NOT FOR COMMERCIAL USE.
