CERTIFICATE NO.

& DATE GACE/001/TM/30/03/2022

INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Coarse Aggregate
ii) Quantity 30 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - I
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample M-II
2. ID. Mark Conakry
3. Sieve Analysis
I.S. SIEVE Retained Cumulative Wt. Cumulative % % Limit
Wt. gms. Retained gms. Wt. retained Passing
22.4 mm 428.000 428.00 10.35 89.65 As per
20 mm 3680.000 4108.000 99.32 0.68 Table 2
10 mm 28.000 4136.000 100.00 0.00 of I.S.
4.75 mm 0.0 4136.000 100.00 0.00 383.
2.36 mm 0.0 4136.000 100.00 0.00
1.18 mm 0.0 4136.000 100.00 0.00
600 micron 0.0 4136.000 100.00 0.00
300 micron 0.0 4136.000 100.00 0.00
150 micron 0.0 4136.000 100.00 0.00
PAN 0.0 4136.000 100.00 0.00

weight of
sample(gms) 4136.0
4. Fineness Modulus 8.10

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/002/TM/30/03/2022 PAGE 1 OF 1
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Coarse Aggregate
ii) Quantity 30 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - I
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample M-I
2. ID. Mark Conakry
3. Sieve Analysis
I.S. SIEVE Retained Cumulative Wt. Cumulative % % Limit
Wt. gms. Retained gms. Wt. retained Passing
40 mm 0.0 0.00 0.00 100.00 As per
11.2 mm 236.0 236.00 18.10 81.90 Table 2
10 mm 1020.000 1256.000 96.32 3.68 of I.S.
4.75 mm 48.000 1304.000 100.00 0.00 383.
2.36 mm 0.000 1304.000 100.00 0.00
1.18 mm 0.0 1304.000 100.00 0.00
600 micron 0.0 1304.000 100.00 0.00
300 micron 0.0 1304.000 100.00 0.00
150 micron 0.0 1304.000 100.00 0.00
PAN 0.0 1304.000 100.00 0.00

weight of
sample(gms) 1304.0
4. Fineness Modulus 7.14

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/003/TM/30/03/2022 PAGE 1 OF 1
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Fine Aggregate
ii) Quantity 30 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - I
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample River sand
2. ID. Mark Conakry
3. Sieve Analysis
IS. SIEVE Retained Cumulative Wt. Cumulative % % Limit
Wt. gms. Retained gms. Wt. retained Passing
40 mm 0.00 0.00 0.00 100.00
20 mm 0.00 0.00 0.00 100.00
10 mm 0 0 0.00 100.00 As per
4.75 mm 0 0 0.00 100.00 Table 4
2.36 mm 0 0 0.00 100.00 of I.S.
1.18 mm 1336 1336 56.80 43.20 383
600 micron 660 1996 84.86 15.14
300 micron 90 2086 88.69 11.31
150 micron 96 2182 92.77 7.23
PAN 170 2352 100.00 0.00

weight of
sample(gms) 2352
6. Fineness Modulus 3.23

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.
LAB ENGINEER LAB INCHARGE
CERTIFICATE NO. & DATE GACE/004/TM/30/03/2022
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Specific Gravity
ii) Quantity 3 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part -III
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample Fine Aggregate
2. ID. Mark Conakry

Sl. No. Determination Trial I

1 Wt. Of Dry Sample [SSD] [gms] A 500

2 Wt. Of Pycnometer + Water [gms] B 1400

3 Wt. Of Pycnometer + Water+ Sample [gms] C 1700

4 Wt of Oven Dry Sample [gms] D 485

5 Water Absorption [%] [(A-D)/D]*100 3.09

6 Specific Gravity [gm/cc] D/(A-[C-B]) 2.43

NOTE :This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/005/TM/30/03/2022 PAGE 1 OF 1
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Dry Loose Bulk Density
ii) Quantity 30 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - III
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample Coarse Aggregate & Fine Aggregate
2. ID. Mark Conakry

Trial No 22.4 mm 11.2 mm River Sand

Wt of Aggregate in gm A 28175 26840.00 3630

Volume of Container V 15000 15000.00 3000

Bulk Density D=A/V 1.88 1.79 1.21

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/006/TM/30/03/2022 PAGE 1 OF 1
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description Flakiness & Elongation Index Report
ii) Quantity 3 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - I
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample Coarse Aggregat
2. ID. Mark Conakry

Sieve Size (mm)

Mass of Test Sample
Mass of Sample Passing the Mass of Sample Retained on
(consisting of at least
Flakiness Slot, (gm) Elongation Gauge, (gm)
200 pieces), (gm)
Passing Retained

63 50 0 0

50 40 0 0
40 31.5 0 0

31.5 25 0 0

25 20 120 12 38

20 16 268 22 42

16 12.5 140 40 68
12.5 10 110 22 12

10 6.3 122 26 36

Total 760 122 196

Flakiness Index = Mass of Sample Passing the Slot x 100
16.05
Total Mass of Sample

Elongation Index = Mass of Sample Retained on the Gauge x 100

25.79
Total Mass of Sample

Combined Flakiness & Elongation Index = 20.92

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/042/11/06/20 PAGE 1 OF 1
INW004
1. Name & Address of Client

2. Project / Site
3. Client's Reference
4. Sample
i) Description Aggregate Impact Value
ii) Quantity 3 Kgs.
iii) Date of receipt 6/10/2022
5. Test method followed, if any IS : 2386 - 1963 Part - III
6. Date of Testing 6/11/2022
TEST REPORT
1. Sample Coarse Aggregate
2. ID. Mark KAKAN

[Link] Determination 11.2 mm

Total Wt. Of Oven-dried Sample(passing 12.5mm - Retained

1 390
10mm Sieve )- W1 [gms]

2 Wt. Of Material Retained on 2.36mm after testing - W2 [gms] 338

3 Wt. Of Material Passing on 2.36mm after testing - W3 [gms] 52.00

4 Aggregate Impact Value (%) = (W3/W1)x100 13.33

NOTE : This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER
CERTIFICATE NO. & DATE GACE/008/TM/30/03/2022
INW001

1. Name & Address of Client Aashapura Boffa Bauxite

Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)

4. Sample
i) Description Aggregate Crushing Value
ii) Quantity 3 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - III
6. Date of Testing 3/26/2022
TEST REPORT

1. Sample Coarse Aggregate

2. ID. Mark Conakry

[Link] Determination 22.4 mm 11.2 mm

Total [Link] Sample( Surface Dry) passing 12.5mm &
1 3210 3410
Retained 10mm IS Sieve. W1 [gms]
Wt. Of Material Retained on 2.36mm after testing - W2
2 2874 2930
[gms]
Wt. Of Material Passing on 2.36mm after testing - W3
3 336.00 480
[gms]
4 Aggregate Crushing Value (%) = (W3/W1)x100 10.47 14.08

NOTE : This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/009/TM/30/03/2022
INW001

1. Name & Address of Client Aashapura Boffa Bauxite

Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)

4. Sample
i) Description Aggregate 10 % fine Value
ii) Quantity 3 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - III
6. Date of Testing 3/26/2022
TEST REPORT

1. Sample Coarse Aggregate

2. ID. Mark Conakry

[Link] Determination 22.4 mm 11.2 mm

Total [Link] Sample( Surface Dry) passing 12.5mm &
1 3210 3410
Retained 10mm IS Sieve. W1 [gms]
Wt. Of Material Retained on 2.36mm after testing - W2
2 2874 2930
[gms]
Wt. Of Material Passing on 2.36mm after testing - W3
3 336.00 480
[gms]
4 Aggregate Crushing Value (%) = (W3/W1)x100 10.47 14.08

5 10 % fine value in kn 168 kn 198 kn

NOTE : This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE

CERTIFICATE NO. & DATE GACE/010/TM/30/03/2022
INW001
1. Name & Address of Client Aashapura Boffa Bauxite
Boffa, conakrya

2. Project / Site Boffa Dolphin Jetty

3. Client's Reference For pile (M-40)
4. Sample
i) Description SPECIFIC GRAVITY
ii) Quantity 3 Kgs.
iii) Date of receipt 3/17/2022
5. Test method followed, if any IS : 2386 - 1963 Part - IV
6. Date of Testing 3/26/2022
TEST REPORT
1. Sample Coarse Aggregate
2. ID. Mark Conakry

Description 11.2 mm 22.4 mm

[Link] SSD sample A 500 500

[Link] [Link] bottle+Water+Aggregates B 1730 1740

[Link] [Link] bottle+Water C 1410 1410

[Link] oven aggregates D 494 496

Specific gravity of aggregates= 2.78 2.94

Water Absorption in % 1.21 0.81

NOTE : -- This certificate refers only to the sample submitted for testing.
-- This certificate is valid at the time of and under the conditions specified herein.
-- This certificate may not be reproduced in part, without the permission of this laboratory.
-- Any correction invalidates this certificate.

LAB ENGINEER LAB INCHARGE