BINOGATOR GECKO (LITE) BOT
INSTRUCTIONS
This Deriv Binary Options bot was offered to you by Dev O (telegram @devlopero). For trading
success, bots and assistance, join our Telegram channel https://t.me/binogator.
REQUIREMENTS
This bot only works on Deriv.com. Upload to the DBot section (app.deriv.com/bot).
You must have minimum account balance of 100 to use the default stake of 0.35.
Binogator Gecko (Lite) is a Digit Over/Under trading strategy bot for Deriv Binary Options
traders. To use this bot, open the Deriv DBot interface at www.deriv.com website. Upload the bot
(.xml file) and you are ready to RUN the bot.
HOW TO USE
Before you RUN the bot, use the LDP analyzer at www.binaryanalyser.com to analyze the Deriv last
digit sequence.
With the default Prediction (8), RUN the bot when you see that most digits lesser than 1 appear in the
analyzer. You can only change the Prediction value to 8 or 1. If you input 1 then RUN the bot when
you see that most digits lower than 8 appear in the analyzer.
INITIAL STAKE & TARGET PROFIT
Initial Stake: The default initial stake for this bot is 0.35. This is the correct setting for $75
capital in order to accommodate losses that may occur. You can change this setting in the Trade
Parameter > Run once at start section. If you must increase your stake, make sure you have
corresponding account balance.
Target Profit: By default the bot will automatically stop when after earning profit of 5 so that
you can analyze the digit sequence and RUN the bot again. You can change this setting by
changing to any number you want in the target profit box.
EXTRA CAUTION
Even if the bot has not stopped running but you’re are seeing too many losses in the session, stop
the bot after a win, change the volatility index and re-analyze the digits before running bot again.
HAPPY AND PROFITABLE TRADING!
Follow us on telegram @Binogator for enquiries and trading success.