Service Information System
Pgina 1 de 3
Engine News
Media Number -SEBD9345-00Publication Date -07/03/2005Date Update i02249619
Wireless Communication Adapter Allows Radio Frequency Communication Between Computer and Electronic Control Module {0785, 0788}
SMCS - 0785; 0788 Caterpillar Products: with Electronic Control Modules that Use Flash Programming All
View Image
Illustration 1 (1) Communication adapter (2) Data Link cable
g01136955
[Link] 2/23/2005
Service Information System
Pgina 2 de 3
(3) PCMCIA card
The Cat 261-3363 Wireless Communication Adapter Gp allows you to monitor a product's electronic control module (ECM) with Cat Electronic Technician (Cat ET) through radio frequency communication. The wireless communication adapter group also allows you to program the ECM by radio. The wireless communication adapter group eliminates the need for a hard cable connection between the product's ECM and your personal computer that runs Cat ET. You now have the ability to work from a desk or your service vehicle. The wireless communication adapter group communicates up to 150 m (500 ft) with the standard antenna. An optional antenna extends the range up to 245 m (800 ft). The working group consists of the following items: a Data Link cable, the communication adapter, a PCMCIA radio card and a software CD-ROM. A foam lined carrying case is included. The wireless communication adapter group is easy to install. You simply connect one end of the cable to the plug for the ECM. Then, you plug the other end of the cable into the communication adapter. The communication adapter has four magnetic feet. You mount the unit as high on the machine as the communication adapter can be mounted. Then, you insert the PCMCIA card in the slot on the PC, select the PCMCIA card profile, and start Cat ET. The following chart provides the specifications for the wireless communication adapter group: Table 1 Specifications for the 261-3363 Wireless Communication Adapter Gp Power requirements Operating temperature Dimensions (without magnets) Weight (without 9 to 32 volts DC,4 watts maximum -40 to +70 degrees C(-40 to +158 degrees F) 213.9 X 119.9 X 45.2 mm(8.42 X 4.72 X 1.78 inches) 472 g (1.04 lb)
[Link] 2/23/2005
Service Information System
Pgina 3 de 3
magnets) Vehicle protocol Wireless communication Range (line of sight) Cat Data Link (CDL), ATA (SAE J1708), Canada (SAE J1939) TCP/IP over 802.11B (11Mb) Standard antenna 150 meters (500 feet) Extended range antenna 245 meters (800 feet)
The following chart provides the consist for the wireless communication adapter group: Table 2 Consist of the 261-3363 Wireless Communication Adapter Gp 239-9955 250-2349 261-4967 259-3183 262-7732 NEHS0926 6V-3072 261-3381
operating range.
Adapter (Communication) Antenna (1) Card (PCMCIA) Data Link Cable As () (2) Foot (Magnetic) Tool Operating Manual Plastic Case Foam Insert
( 1 ) Standard range antenna. Optional, 261-4871 Antenna As is available for extended ( 2 ) The 259-3183 Cable As (Datalink) is available as a service part.
Copyright 1993 - 2005 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Wed Feb 23 [Link] EST 2005
[Link] 2/23/2005
