Scribd
Upload
103 views3 pages

EC350D L Volvo Cylinder Speed Guide

This document provides service information for measuring cylinder speeds on an EC350D L Volvo excavator. It lists the preparation steps, measurement conditions illustrated in figures 1 through 3, and specifications for standard, allowable, and remark values for raising, lowering, rolling in, and rolling out times for the boom, arm, and bucket cylinders in seconds. Measurement should be taken 3 times and averaged.

Uploaded by

Sunil Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views3 pages

EC350D L Volvo Cylinder Speed Guide

This document provides service information for measuring cylinder speeds on an EC350D L Volvo excavator. It lists the preparation steps, measurement conditions illustrated in figures 1 through 3, and specifications for standard, allowable, and remark values for raising, lowering, rolling in, and rolling out times for the boom, arm, and bucket cylinders in seconds. Measurement should be taken 3 times and averaged.

Uploaded by

Sunil Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Service Information

Document Title: Function Group: Information Type: Date:


Cylinder speed 1732 Service Information 18-07-2022
Profile:
EC350D L Volvo

Cylinder speed
Showing Selected Profile

Valid for serial numbers


Model Production site Serial number start Serial number stop
EC350D L Volvo

Preparation
Boom cylinder

Ÿ Arm cylinder is fully retracted.


Ÿ Bucket cylinder is fully extended.

Figure 1
Measuring condition, boom cylinder

A. Raise
B. Lower

Arm cylinder

Ÿ Bucket cylinder is fully extended.


Figure 2
Measuring condition, arm cylinder

A. Roll out
B. Roll in

Bucket cylinder

Figure 3
Measuring condition, bucket cylinder

A. Roll out
B. Roll in

Measurement

Ÿ Operate the control lever at full stroke.


Ÿ Measure the time, by stop watch, for the cylinder to fully stroke (exclude the cushioned stroke).
Ÿ Measure 3 times to take average value.
Cylinder speed, unit: sec

Operation Standard Allowable value Remarks


Boom Raise 3.2 ± 0.3 3.8 From the ground to full extension.
Lower 2.6 ± 0.3 3.2 From full extension to the ground.
Arm Roll in 3.8 ± 0.3 4.4 From full retraction to full extension.
Roll out 2.6 ± 0.3 3.2 From full extension to full retraction.
Bucket Roll in 3.0 ± 0.3 3.6 From full retraction to full extension.
Roll out 2.4 ± 0.3 3.0 From full extension to full retraction.

You might also like