Scribd
Upload
276 views2 pages

GMT Eccentric Chuck Specifications

This chuck is designed for machining components center-to-center with accuracy. It has retractable jaws actuated by a hydraulic cylinder that clamp the component close to the center to avoid distortion. The jaws retract after machining, and the face driver then transmits torque for driving the gripped portion, allowing single-setup machining from center-to-center. The chuck comes in various sizes and specifications for different component diameters and machining operations.

Uploaded by

Rajiv Gandhi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
276 views2 pages

GMT Eccentric Chuck Specifications

This chuck is designed for machining components center-to-center with accuracy. It has retractable jaws actuated by a hydraulic cylinder that clamp the component close to the center to avoid distortion. The jaws retract after machining, and the face driver then transmits torque for driving the gripped portion, allowing single-setup machining from center-to-center. The chuck comes in various sizes and specifications for different component diameters and machining operations.

Uploaded by

Rajiv Gandhi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Document Cover
  • Technical Specifications

GMT

GMT Eccentric Compensating Chuck with Retractable jaws. The gripped portion can now be finished with fine
Jaws and face drive (PER) is used for machining forgings depth of cut. This ensures that the component is
and black bars between centres in single setup, (i.e.) no machined right upto the chuck face and the centre to
second operation necessary. centre machining of component is completed. The chuck
body is made from forged medium carbon steel and
This Chuck is designed to machine components centre to toughened. The levers and hinge pins are made from
centre with great accuracy. nickel chrome steel, case hardened and ground in all
working surfaces. The hard jaws are made from low
The retractable jaws are actuated by a hydraulic cylinder carbon steel, case hardened and ground.
or an also centre to centre, since the jaws have an
eccentric clamping drive. After various machining The special jaws are designed to clamp the component
operations are done on the component, without stopping as close to the centre to avoid distortion of the
the machine the clamping jaws are retracted. The torque component and provide inconsistent gripping.
is then transmitted through the face driver for driving the
All dimensions in mm
Hx K K1
Model Size Ø A Ø B Ø B1 Ø C D E Ø H6 F G (PCD) H1 J J1
3 Nos. Min. Max. Min. Max.
28-21 160 160 125 38 131 29 115 6 92 M 10 M 16 15 55 13.5 43.5 1 21
28-22 200 200 160 48 164 36 150 6 125 M 12 M 20 18 70 16.5 54.5 1 21
28-23 250 250 200 60 205 45 185 6 160 M 16 M 24 30 70 20.5 68 1.5 33
28-24 315 315 250 90 205 55 220 6 171.4 M 16 M 24 25 70 20.5 68 1.5 33
28-25 400 400 335 135 205 55 300 6 235 M 20 M 24 30 70 20.5 68 1.5 33

Compen Min. Drawbar Gripping


Jaw Wedge Body Speed Weight
Model N O Ø 01 Ø P -sation Clamping pull in Force
Movement Stroke Stroke in rpm in Kg
on dia dia. Kg in kgf
28-21 22.5 31.5 19 25 5.5 10 20 2 25 2600 2500 2500 23
28-22 28 35 24 30 6.5 13 25 3 32 2400 3100 3100 39
28-23 35 40 30 30 8 16 31.5 4 38 2400 4000 4000 74
28-24 35 40 30 30 8 16 31.5 4 38 1900 4000 4000 105
28-25 35 40 30 30 9 16 31.5 4 38 1500 4000 4000 170

Pallikkaranai, Chennai – 601302, INDIA


Ph: +91-44-2460627 to 629, Fax: +91-44-2460112 Email: [email protected] Web: www.gmt.co.in
Due to constant development work we reserve the right to depart from catalogue specifications.

You might also like