Scribd
Upload
173 views1 page

Stroker Ryde Lever Pivot Pin Replacement

The document provides instructions for replacing the lever pivot pin on a Stroker Ryde bicycle brake. It warns that installation should only be done by a qualified technician. The instructions describe locating the lever pivot pin and spring clip, removing the old pin, inserting the new pin through the master cylinder and lever blade so the flange is facing up, and securing it with the spring clip.

Uploaded by

Donnie Darko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views1 page

Stroker Ryde Lever Pivot Pin Replacement

The document provides instructions for replacing the lever pivot pin on a Stroker Ryde bicycle brake. It warns that installation should only be done by a qualified technician. The instructions describe locating the lever pivot pin and spring clip, removing the old pin, inserting the new pin through the master cylinder and lever blade so the flange is facing up, and securing it with the spring clip.

Uploaded by

Donnie Darko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

45-25349

Stroker Ryde Lever Pivot Pin Replacement

Warning: When installing any of the disc brake components,


installation work should be done by a qualified technician with the
proper tools. Improper installation could cause severe or fatal injuries.

Stroker Ryde Lever Pin Removal


1. Locate the lever pivot pin and lever pivot pin spring retaining clip.
(Figures 1 and 2)
2. Carefully remove the spring clip from one side of the lever pivot
pin.
Warning: Always wear protective eyewear when removing or
Figure 3. Insert the new lever pivot pin.
installing spring clips.
3. Push the lever pivot pin through the lever.
Stroker Ryde Lever Pin Installation Figure 1. Location of lever pivot pin.
4. Insert the new lever pivot pin through the master cylinder and lever
blade. (figure 3)
Note: The pin should be inserted so the flange is on the upper side
of the master cylinder. (Figure 4)
5. Install the new spring clip to secure the lever pin.
Note: The spring clip should sit securely in the groove on the pivot
pin. (Figure 4)
Warning: Always wear protective eyewear when removing or
installing spring clips.

Figure 2. Location of lever pivot pin. Figure 4. New lever pivot pin features.
retaining clip.
______________________________________________________________________________________________
5800 W. Donges Bay Road. Mequon WI, 53092 Phone: (888) 686-3472 Fax: (262) 512-4219
www.hayesdiscbrake.com [email protected]

45-25349
Stroker Ryde Lever Pivot Pin Replacement

Warning: When installing any of the disc brake components,


installation work should be done by a qualified technician with the
proper tools. Improper installation could cause severe or fatal injuries.

Stroker Ryde Lever Pin Removal


1. Locate the lever pivot pin and lever pivot pin spring retaining clip.
(Figures 1 and 2)
2. Carefully remove the spring clip from one side of the lever pivot
pin.
Warning: Always wear protective eyewear when removing or
Figure 3. Insert the new lever pivot pin.
installing spring clips.
3. Push the lever pivot pin through the lever.
Stroker Ryde Lever Pin Installation Figure 1. Location of lever pivot pin.
4. Insert the new lever pivot pin through the master cylinder and lever
blade. (figure 3)
Note: The pin should be inserted so the flange is on the upper side
of the master cylinder. (Figure 4)
5. Install the new spring clip to secure the lever pin.
Note: The spring clip should sit securely in the groove on the pivot
pin. (Figure 4)
Warning: Always wear protective eyewear when removing or
installing spring clips.

Figure 2. Location of lever pivot pin. Figure 4. New lever pivot pin features.
retaining clip.
______________________________________________________________________________________________
5800 W. Donges Bay Road. Mequon WI, 53092 Phone: (888) 686-3472 Fax: (262) 512-4219
www.hayesdiscbrake.com [email protected]

You might also like