MENU MENUS:

1
POWER ON PCI-100LS There are 6 menus to choose from. Under each menu there
may be several different functions or s creens.

PROGRAMMING QUICK REFERENC E GUIDE POS/TACH displays the position and

POS 359 TACH 000 START speed
INITIAL one time setup functions
LIMIT SWITCHES program limit switch
functions
COUNTERS view/pgm counter functions
SUPERVISOR enable/disable program
Menu will toggle to the next menu regardless of what func tion
you are currently in.
MENU
Motion Detect programming
RESET Resets faults or Saves (enter) data
L=low speed limit ENTER
2 Zeros the resolver ^ H=high speed limit ^ Chain break delay ^ Top Stop Angle
> Goes into a function, then once in a
^

INITIAL> ^ZERO SET(ENT) ^MDET >L000-H999 ^MDLY >D999 ^TSTOP >A319 function will move the cursor if applicable.
Move the press to top and > enables the arrow keys to > enables the arrow keys to
> enables the arrow keys to
press ENTER to zero the adjust the high and low speed adjust the top stop angle in ^ Selects functions within a Menu or
adjust the delay in
resolver position. limits. Press ENTER when degrees. Press ENTER when increments numbers if applicable.
milliseconds. Press ENTER
finished. finished.
when finished.
^ Selects functions within a Menu (in the
opposite direction of the up arrow) or
MENU decrements numbers if applicable.

Speed compensation
3 Limit switch 1 programming Limit switch 2 programming Limit switch 3 programming Limit switch 4 programming programming S=start speed
Option only F=from T=to F=from T=to ^ F=from T=to ^ F=from T=to ^ A=angle (# of degrees)
^

LIMIT SWITCHES > ^LS1 >F000-T000 ^LS2 >F000-T000 ^LS3 >F100-T200 ^LS4 >F210-T235 ^SCOMP>S100-A020
> enables the arrow keys to > enables the arrow keys to > enables the arrow keys to > enables the arrow keys to > enables the arrow keys to
adjust the limit switch window ^ adjust the limit switch window adjust the limit switch window adjust the limit switch window adjust the speed comp settings.
settings. Press ENTER when settings. Press ENTER to settings. Press ENTER to settings. Press ENTER to Press ENTER to save.
finished. save. save. save.

MENU

4 View the strokes count ^ Program the batch count ^ Zero the strokes count ^ View the total hits counter ^ Zero the total hits counter

^Zero TOTAL(ENT)
^

COUNTERS > ^STROKE S000000 ^BATCH> B000000 ^ZeroStrks (ENT) ^THITS T00000000
> enables the arrow keys to Press ENTER to zero the Press ENTER to zero the total
adjust batch count setting. strokes count. hits counter.
Press ENTER to save.

MENU
Programming is currently
disabled. Enable programming code Programming is enabled.
Use the arrow
ENTER
5 SETUP 478 keys to enter SETUP>ENABLED All programming Returns to
SETUP>DISABLED the code MENU
enabled START
OR
^

SUPERVISOR >
SETUP>ENABLED blinking curs or ^
SETUP>ENABLED SETUP>DISABLED All programming
Programming is currently ENTER
enabled. disabled
MENU Returns to START