Dia Lens Finishing Products & Accessories

The best solutions

for your finishing
laboratory 

solutions

221002.31
Printed in Japan
For simple and precise rimless drill mounts・
・・・
・
DigiDrill DM-50 （Rimless Lens Drill） Lens Drilling Machine DM-3 （Rimless Lens Drill）
The best solution for fast and precisely processing rimless drill mounts! All materials including mineral glass.
●Two-sided drilling system performs speedy drilling without cracking
Digitally captures and memorizes hole of lens.
and notch locations on the demo lenses ●Available for all current lens materials - mineral glass, CR-39 and
then transfers them to the final patient polycarbonate as well.
lenses simply and accurately. ●The diameter of hole is simply adjustable to a precision of 0.2mm
with a directly-readable scale.

Specifications
Possible Diameter of Drilling 0.8∼2.8mm
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 17W
Dimensions／Weight 140（W） ×185（D） ×275（H）mm／4.1kg
Accessories Lens holder attachment, drill bit holder, etc.
●Simplified operation for any shape hole or notch on any shape lens.
●Hole positions of demo lenses can be simply and accurately measured and stored in a computer memory by pressing one button
then called up for drilling the final patient lenses.

DM-5
●8 positions can be memorized at once.

●Allows drilling a customized lens with shape modification.

●High-speed, high-damping and non-runout drill spindle produces the finest finish of holes and notches.
Handy Drill （Rimless Lens Drill）

●Meets various styles of holes and notches Easy to use for high quality rimless jobs!
A wide range of extra drill bits, router bits (notching
bits) and end-mill bits is available from our optional ●Rigid and non-runout drill spindle performs speedy and attractive
accessories. drilling on all plastic materials.
●Well-thought out design of lens-supporting system secures drill
point and angle on any shape lens.
●A wide range of extra drill bits is available and exchangeable quick
●A unique mounting and simply.
tool changes tool bits ●1/2-hole hand reamer（a standard accessory）eases fine tuning
quick and safe in 10 adjustment on a hole.
seconds or less! ●1/2-hole hand reamer included
This handy tool allows for fast
and simple fine tuning adjustment
of the actual frame to lens fit.

Specifications
Possible diameter of tooling 0.8∼2.6mm（3.0mm for optional end-mill）
Specifications
Spindle speed 0∼6400 RPM（Variable）
Possible diameter of tooling 0.8∼2.6mm（3.0mm for optional end-mill）
Power requirements 100∼240V 50／60Hz AC, 22W
Spindle speed 2900（50Hz）／ 3500（60Hz）RPM
Dimensions／Weight 300（W） ×225（D） ×250（H）mm／5.0kg
●Useful line marker is also standard! Standard accessories including
Power requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 30W
Helps you draw an accurate horizontal Accessories AC／DC power adapter, drill bits, Dimensions／Weight 140（W） ×185（D） ×275（H）mm／4.0kg
line on any type of lens simply. 1/2-hole hand reamer, line marker, tools, etc. Accessories Standard drill bits, 1/2-hole hand reamer, etc.
For simple and precise rimless drill mounts・
・・・
・
DigiDrill DM-50 （Rimless Lens Drill） Lens Drilling Machine DM-3 （Rimless Lens Drill）
The best solution for fast and precisely processing rimless drill mounts! All materials including mineral glass.
●Two-sided drilling system performs speedy drilling without cracking
Digitally captures and memorizes hole of lens.
and notch locations on the demo lenses ●Available for all current lens materials - mineral glass, CR-39 and
then transfers them to the final patient polycarbonate as well.
lenses simply and accurately. ●The diameter of hole is simply adjustable to a precision of 0.2mm
with a directly-readable scale.

Specifications
Possible Diameter of Drilling 0.8∼2.8mm
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 17W
Dimensions／Weight 140（W） ×185（D） ×275（H）mm／4.1kg
Accessories Lens holder attachment, drill bit holder, etc.
●Simplified operation for any shape hole or notch on any shape lens.
●Hole positions of demo lenses can be simply and accurately measured and stored in a computer memory by pressing one button
then called up for drilling the final patient lenses.

DM-5
●8 positions can be memorized at once.

●Allows drilling a customized lens with shape modification.

●High-speed, high-damping and non-runout drill spindle produces the finest finish of holes and notches.
Handy Drill （Rimless Lens Drill）

●Meets various styles of holes and notches Easy to use for high quality rimless jobs!
A wide range of extra drill bits, router bits (notching
bits) and end-mill bits is available from our optional ●Rigid and non-runout drill spindle performs speedy and attractive
accessories. drilling on all plastic materials.
●Well-thought out design of lens-supporting system secures drill
point and angle on any shape lens.
●A wide range of extra drill bits is available and exchangeable quick
●A unique mounting and simply.
tool changes tool bits ●1/2-hole hand reamer（a standard accessory）eases fine tuning
quick and safe in 10 adjustment on a hole.
seconds or less! ●1/2-hole hand reamer included
This handy tool allows for fast
and simple fine tuning adjustment
of the actual frame to lens fit.

Specifications
Possible diameter of tooling 0.8∼2.6mm（3.0mm for optional end-mill）
Specifications
Spindle speed 0∼6400 RPM（Variable）
Possible diameter of tooling 0.8∼2.6mm（3.0mm for optional end-mill）
Power requirements 100∼240V 50／60Hz AC, 22W
Spindle speed 2900（50Hz）／ 3500（60Hz）RPM
Dimensions／Weight 300（W） ×225（D） ×250（H）mm／5.0kg
●Useful line marker is also standard! Standard accessories including
Power requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 30W
Helps you draw an accurate horizontal Accessories AC／DC power adapter, drill bits, Dimensions／Weight 140（W） ×185（D） ×275（H）mm／4.0kg
line on any type of lens simply. 1/2-hole hand reamer, line marker, tools, etc. Accessories Standard drill bits, 1/2-hole hand reamer, etc.
For producing accurate patterns・
・・・
・ For the best lens-edge finishing・
・・・
・
Pattern Maker PM-8 Auto Groover AG-5 Version EX （Lens-edge Groover）
●The most advanced stand-alone pattern maker. Smaller lenses can be grooved!
Scans frames, lenses and patterns digitally and cuts out extremely
accurate patterns automatically. Processes a small 24mm high lens for the latest frame fashions simply in a single job cycle due
to a new designed lens guide system.
●Generates boxed or decentered pattern fully automatically.
A perfectly boxed pattern, on which the pattern’s mechanical center
comes on the geometric center of the lens-shape is automatically
available, simply by putting the frame in place and tracing it, If the
values of the client’s PD and height of eye-point are inputted to the
PM-8, a decentered pattern is generated automatically to enable you to
block a lens blank on its optical center.

●Traces a lens-shape as small as 18mm high.

●Minimum tracing pressure eliminates distortion even with extremely
delicate frames. ●Three grooving styles –
● Center, ●Front Curve & ●Back Curve grooves – are available.
●Takes only seconds to change between frame and lens tracing.

●High quality diamond cutter wheel fine grooves both mineral

and plastic lenses.
●Depth and location of groove are adjustable
simply and precisely. Specifications
Specifications Width of groove 0.6mm - standard（0.5∼1.2mm with extra wheels）
Range of Measurement Min：18mm（in height）Max：85mmφ Max. depth of groove 0.7mm
Possible Diameter of Pattern Min：21mm（in height）Max：80mmφ Thickness / Diameter of lens acceptable 1.5∼11.0mm ／24∼70mm
Possible Thickness of Pattern Max：1.8mm Power requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 57W
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 47W Dimensions／Weight 170（W） ×210（D） ×150（H）mm／2.7 kg
Dimensions／Weight 240（W）×350（D） ×260（H）mm／9.0kg

Pattern Maker PM-7 Auto Polisher AP-2 （Lens-edge Polisher）

●Automatically edge-polish all
●The standard in the world! current plastic materials
●Cuts out a pattern for 30 seconds with high-accuracy and attractive including polycarbonate,
finish. hi-index with the same buffing
●Frame is set simply in precise position, and traced without wheel and polish. True simple
deformation of the rim. to operate!
●Both rimless and beveled
●3 types of tracing probes - lenses can be polished.
long, short and with roller - are
standard to meet a wide range
●No damage is caused to the
of frame styles.
optical surfaces of lens due to
our unique patented system.
●A perfect automatic
vacuum-clean-out system is
available only by connecting
your own vacuum cleaner（less
than 600W）to the AP-2.
Specifications
Max. Diameter of Pattern 80mm
Max. Thickness of Pattern 1.8mm
Specifications
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 60W Dimensions／Weight 214（W）×270（D） ×240（H）mm／6.7kg
Dimensions／Weight 210（W）×165（D） ×300（H）mm／8.3kg Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 85W
For producing accurate patterns・
・・・
・ For the best lens-edge finishing・
・・・
・
Pattern Maker PM-8 Auto Groover AG-5 Version EX （Lens-edge Groover）
●The most advanced stand-alone pattern maker. Smaller lenses can be grooved!
Scans frames, lenses and patterns digitally and cuts out extremely
accurate patterns automatically. Processes a small 24mm high lens for the latest frame fashions simply in a single job cycle due
to a new designed lens guide system.
●Generates boxed or decentered pattern fully automatically.
A perfectly boxed pattern, on which the pattern’s mechanical center
comes on the geometric center of the lens-shape is automatically
available, simply by putting the frame in place and tracing it, If the
values of the client’s PD and height of eye-point are inputted to the
PM-8, a decentered pattern is generated automatically to enable you to
block a lens blank on its optical center.

●Traces a lens-shape as small as 18mm high.

●Minimum tracing pressure eliminates distortion even with extremely
delicate frames. ●Three grooving styles –
● Center, ●Front Curve & ●Back Curve grooves – are available.
●Takes only seconds to change between frame and lens tracing.

●High quality diamond cutter wheel fine grooves both mineral

and plastic lenses.
●Depth and location of groove are adjustable
simply and precisely. Specifications
Specifications Width of groove 0.6mm - standard（0.5∼1.2mm with extra wheels）
Range of Measurement Min：18mm（in height）Max：85mmφ Max. depth of groove 0.7mm
Possible Diameter of Pattern Min：21mm（in height）Max：80mmφ Thickness / Diameter of lens acceptable 1.5∼11.0mm ／24∼70mm
Possible Thickness of Pattern Max：1.8mm Power requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 57W
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 47W Dimensions／Weight 170（W） ×210（D） ×150（H）mm／2.7 kg
Dimensions／Weight 240（W）×350（D） ×260（H）mm／9.0kg

Pattern Maker PM-7 Auto Polisher AP-2 （Lens-edge Polisher）

●Automatically edge-polish all
●The standard in the world! current plastic materials
●Cuts out a pattern for 30 seconds with high-accuracy and attractive including polycarbonate,
finish. hi-index with the same buffing
●Frame is set simply in precise position, and traced without wheel and polish. True simple
deformation of the rim. to operate!
●Both rimless and beveled
●3 types of tracing probes - lenses can be polished.
long, short and with roller - are
standard to meet a wide range
●No damage is caused to the
of frame styles.
optical surfaces of lens due to
our unique patented system.
●A perfect automatic
vacuum-clean-out system is
available only by connecting
your own vacuum cleaner（less
than 600W）to the AP-2.
Specifications
Max. Diameter of Pattern 80mm
Max. Thickness of Pattern 1.8mm
Specifications
Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 60W Dimensions／Weight 214（W）×270（D） ×240（H）mm／6.7kg
Dimensions／Weight 210（W）×165（D） ×300（H）mm／8.3kg Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 85W
For accurate and attractive glazing・
・・・
・
Lens Marker Blocker LS-3W Lens Blocker LS-3E Hand Edgers NH-series
Upgraded with battery-powered LED light source! NH-22F NH-22V NH-30F NH-30V NH-30W NH-32WV NH-32TV
●Self-contained water system, compact and lightweight design require no
LS-3W Twin-arm type for both blocking and marking lenses plumbing and no installation.
LS-3E Single-arm type for blocking lenses ●Durable plastic housing and water-proof inside construction produce no
corrosion.
●New-introduced LED light source provides much clearer layout
screen, at the same time actualizes a super power-thrifty device ●Reversible wheel revolution with an electric switch.
with a built-in auto-shut-off timer. ●A large range of high quality metal-bonded diamond wheels（100mmφ）is
●Battery-powered cordless, compact and lightweight design permits available.
placement anywhere.
NH-22F 22mm（W）600mesh NH-30W 30mm（W）600mesh＋200mesh
●Multifunctional design performs NH-22V 22mm（W）600mesh w／V-groove NH-32WV 32mm（W）600mesh w／V-groove＋200mesh
●centering, ●adhesive blocking,
●suction blocking and
NH-30F 30mm（W）600mesh NH-32TV 32mm（W）600mesh w／Free-floating V-groove

●marking axis-lines and center-dot NH-30V 30mm（W）600mesh w／V-groove

（L-33W）. Blocking head and
marking head can be simply Specifications
replaced each other on the left and Revolution Speed of Wheel 1700rpm／60Hz, 1400rpm／50Hz
right arms as operator’s option Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 97W
（L-33W）. Dimensions／Weight 220（W）×360（D） ×280（H）mm／8.0kg

●Projects absolutely parallax-free and

on-size images of lens and pattern on
Frame Heater FH-1
an easi-view screen, yet movable ●An adjustable air duct and a sliding frame table
lead-lines position the segment simply warm up frames the most effectively and
and precisely. quickly.
LS-3W ●A nozzle attachment focuses the hot air in a
specific area of the frame.
●A wide range of adapters for other Specifications ●Three temperature settings of hot air are
manufacturers’ blocking systems is available available.
Power Requirements 3V DC, 0.5W（Battery：LR14, R14 or Type C／2pcs.）
from our optional accessories.
Dimensions／Weight 180（W）×245（D）×250（H）mm／3.2kg（LS-3W）2.7kg（LS-3E） ●Double safeguards - a stable thermostat and an
auto-shut-off timer - built in.

Frame Meter FM-1 Specifications

Temperature Range
Power Requirements
100℃∼180℃ （Adjustable）
100∼120V 60Hz AC or 200∼240V 50Hz AC, 310W
●The frame’s dimensions can be identified by simply dropping the Dimensions／Weight 120（W）×210（D） ×240（H）mm／2.4kg
frame into the self-centering table and measuring the frame PD and
both monocular PD.
●Checks accuracy of cut patterns and finished lenses.
Screw Finishing Kit Pattern Blanks
●Pinpoints the optical
center or boxing center ●Trims off the screws of a ●PATTERN SHEET - LARGE
on the frame eyeshape. 'three-piece' rimless frame in 70（W）×60（H）×1.7（T）mm
Ensures the perfect lens equal length with a unique Clear or Red
placement of any single cutter, and finishes them off 4 blanks in 1 sheet
vision, bifocal or with another small tool. ●PATTERN SHEET - SMALL
multifocal lens. 59（W）×48（H）×1.5（T）mm
●3 types of cutters（0.8mm,
Clear or Red
1.0mm, and 1.2mm） are
4 blanks in 1 sheet
available according to the
length to trim. ●ROUND PATTERN BLANK
80（φ）×1.7（T）mm
Clear or Red
Specifications
Range of Measurable P.D. 50mm∼84mm／25mm∼42mm（Monocular PD）
Range of Measurable Height（from Center） 15mm∼25mm
Dimensions／Weight 200（W）
×125（D）
×90（H）mm／1.0kg
For accurate and attractive glazing・
・・・
・
Lens Marker Blocker LS-3W Lens Blocker LS-3E Hand Edgers NH-series
Upgraded with battery-powered LED light source! NH-22F NH-22V NH-30F NH-30V NH-30W NH-32WV NH-32TV
●Self-contained water system, compact and lightweight design require no
LS-3W Twin-arm type for both blocking and marking lenses plumbing and no installation.
LS-3E Single-arm type for blocking lenses ●Durable plastic housing and water-proof inside construction produce no
corrosion.
●New-introduced LED light source provides much clearer layout
screen, at the same time actualizes a super power-thrifty device ●Reversible wheel revolution with an electric switch.
with a built-in auto-shut-off timer. ●A large range of high quality metal-bonded diamond wheels（100mmφ）is
●Battery-powered cordless, compact and lightweight design permits available.
placement anywhere.
NH-22F 22mm（W）600mesh NH-30W 30mm（W）600mesh＋200mesh
●Multifunctional design performs NH-22V 22mm（W）600mesh w／V-groove NH-32WV 32mm（W）600mesh w／V-groove＋200mesh
●centering, ●adhesive blocking,
●suction blocking and
NH-30F 30mm（W）600mesh NH-32TV 32mm（W）600mesh w／Free-floating V-groove

●marking axis-lines and center-dot NH-30V 30mm（W）600mesh w／V-groove

（L-33W）. Blocking head and
marking head can be simply Specifications
replaced each other on the left and Revolution Speed of Wheel 1700rpm／60Hz, 1400rpm／50Hz
right arms as operator’s option Power Requirements 100∼120V 60Hz AC or 200∼240V 50Hz AC, 97W
（L-33W）. Dimensions／Weight 220（W）×360（D） ×280（H）mm／8.0kg

●Projects absolutely parallax-free and

on-size images of lens and pattern on
Frame Heater FH-1
an easi-view screen, yet movable ●An adjustable air duct and a sliding frame table
lead-lines position the segment simply warm up frames the most effectively and
and precisely. quickly.
LS-3W ●A nozzle attachment focuses the hot air in a
specific area of the frame.
●A wide range of adapters for other Specifications ●Three temperature settings of hot air are
manufacturers’ blocking systems is available available.
Power Requirements 3V DC, 0.5W（Battery：LR14, R14 or Type C／2pcs.）
from our optional accessories.
Dimensions／Weight 180（W）×245（D）×250（H）mm／3.2kg（LS-3W）2.7kg（LS-3E） ●Double safeguards - a stable thermostat and an
auto-shut-off timer - built in.

Frame Meter FM-1 Specifications

Temperature Range
Power Requirements
100℃∼180℃ （Adjustable）
100∼120V 60Hz AC or 200∼240V 50Hz AC, 310W
●The frame’s dimensions can be identified by simply dropping the Dimensions／Weight 120（W）×210（D） ×240（H）mm／2.4kg
frame into the self-centering table and measuring the frame PD and
both monocular PD.
●Checks accuracy of cut patterns and finished lenses.
Screw Finishing Kit Pattern Blanks
●Pinpoints the optical
center or boxing center ●Trims off the screws of a ●PATTERN SHEET - LARGE
on the frame eyeshape. 'three-piece' rimless frame in 70（W）×60（H）×1.7（T）mm
Ensures the perfect lens equal length with a unique Clear or Red
placement of any single cutter, and finishes them off 4 blanks in 1 sheet
vision, bifocal or with another small tool. ●PATTERN SHEET - SMALL
multifocal lens. 59（W）×48（H）×1.5（T）mm
●3 types of cutters（0.8mm,
Clear or Red
1.0mm, and 1.2mm） are
4 blanks in 1 sheet
available according to the
length to trim. ●ROUND PATTERN BLANK
80（φ）×1.7（T）mm
Clear or Red
Specifications
Range of Measurable P.D. 50mm∼84mm／25mm∼42mm（Monocular PD）
Range of Measurable Height（from Center） 15mm∼25mm
Dimensions／Weight 200（W）
×125（D）
×90（H）mm／1.0kg
 Dia Lens Finishing Products & Accessories
The best solutions
for your finishing
laboratory 

solutions

221002.31
Printed in Japan