Multimeter & Accessory Guide
Multimeters
Multimeter Accessories
Voltage Detection Devices
Caterpillar Service Technology Group
Digital Multimeters
• 146-4080 Caterpillar True RMS Digital Multimeter
– Measures ACV, DCV, Amp, Hz, Resistance, Temp, & Duty Cycle
– RS-232 Connector for use with DataView (Requires 146-8488 Cable As)
– CE Compliant
• 6V-7070 Heavy Duty Multimeter
– Easy to use Multimeter
– Measures ACV, DCV, Amp, & Resistance
– Very Durable
– CE Compliant
• 9U-7330 Fluke 87 True RMS Digital Multimeter
– Measures ACV, DCV, Amp, Hz, Resistance, & Duty Cycle
– CE Compliant
• 212-2160 Caterpillar Low Cost Digital Multimeter
– Measures ACV, DCV, Amp, Hz, Resistance, & Duty Cycle
– Full Feature Digital Multimeter with compact size
– CE Compliant
Caterpillar Service Technology Group
Multimeter Test Leads
• 7X-1710 Multimeter Spoons
– Multimeter leads plug into probe cable jacks; probes then
slide along appropriate wires into rear of Deutsch or Amp
connector until they contact pin or socket of interest
– Eliminates need for T Cable
• 6V-7072 Test Leads
– Replacement Test Leads for Digital Multimeters
– Provides alligator clips, point tips, and banana tips
• 8T-3224 Needle Tip Group
– Tips slide over standard test lead tips to provide long, smaller
diameter tip for inserting into connectors or other tight areas
• 1U-8115 Insulated Tip Test Lead Set
– Spring loaded insulators over metal probe tips to prevent tips
from making accidental electrical contact with wires and
terminals during testing
Caterpillar Service Technology Group
Current Probes
• 155-5175 AC Current Probe
– Measure AC Current on Caterpillar Generator
Sets
– Measures conductors up to 54.1 mm (2.13 in)
– Replaces 6V-4960 AC Current Probe
– CE Compliant
• 155-5176 AC/DC Current Probe
– Measure AC/DC Current on Caterpillar
Generator Sets
– Measures conductors up to 42 mm (1.6 in)
– Replaces 9U-5795 AC/DC Current Probe
– CE Compliant
• 8T-0900 AC/DC Current Probe
– Measure AC/DC Current on Caterpillar
Generator Sets
– Measures conductors up to 19 mm (0.75 in)
– Digital Display for reading without DMM
– Also used with 146-4080, 9U-7330, & 6V-
7070
Caterpillar Service Technology Group
Test Lights
• 8T-0500 Continuity Light
– Used to test non-energized circuits
– Comes with light-bulb and 2 N size batteries
– Designed for rugged field use
• 5P-7277 Voltage Test Light
– Used to make quick checks for voltage presence
– Designed for 12 to 36 volt systems
– Designed for rugged field use
• 1U-7318 Voltage & Continuity Flashlight
– Used to test non-energized or energized circuits
– Tests continuity or voltage
– Designed for rugged field use
– Continuity wires shipped inside flashlight
Caterpillar Service Technology Group
Voltage & Temperature
• 4C-6600 Voltmeter
– Small Digital Voltmeter designed to quickly
determine voltage between 6 and 60 Volts DC
– Bright LED Display easy to read outdoors
– No internal batteries to wear out
• 1U-6236 IR Probe
– Measures surface temperatures without touching
object
– Temperature range -18 to 260 °C (0 to 500 °F)
• 6V-9130 TC Adapter
– Measures temperature via Type K Thermocouple
– For use with 9U-7330, 6V-7070, & 146-4080
Caterpillar Service Technology Group
Multimeter Fuses, Battery, & Case
• 3N-5612 1 Amp 600 Volt Fuse
• 6V-7803 2 Amp 600 Volt Fuse
• 6V-7802 10 Amp 600 Volt Fuse
• 9U-6398 15 Amp 600 Volt Fuse
• 171-5207 11 Amp 1000 Volt Fuse
• 171-5209 440 mAmp 1000 Volt Fuse
• 1U-9534 9 Volt Long Life Battery
• 6V-3031 Snap Front DMM Carrying Case
R
Caterpillar Service Technology Group
Digital Multimeter Reference Material
• NEHS0678 146-4080 Tool Operating Manual
• NEHS0682 146-4080 Special Instructions
• SEHS7734 6V-7070 Special Instructions
• 146-8488 RS-232 Cable for DataView
Caterpillar Service Technology Group
