Scribd
Upload
377 views2 pages

Calibration Results for Electro Meter

This document summarizes the calibration of an instrument. It provides the instrument's range, manufacturer, and identification number. The calibration was performed by two engineers at different points and their results were analyzed to calculate the measurement uncertainty. The calculation shows how the combined uncertainty was derived from the individual measurements to determine if the instrument passed calibration validation.

Uploaded by

Ashish Dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
377 views2 pages

Calibration Results for Electro Meter

This document summarizes the calibration of an instrument. It provides the instrument's range, manufacturer, and identification number. The calibration was performed by two engineers at different points and their results were analyzed to calculate the measurement uncertainty. The calculation shows how the combined uncertainty was derived from the individual measurements to determine if the instrument passed calibration validation.

Uploaded by

Ashish Dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

ELECTRO METER CORPORATION, KOLKATA Format No. : 7.

7F-02
Date:
Replicate Calibration
Description of the Instrument   Lab Acceptance
Range of the Instrument   En </= +/-1
Make of the Instrument   Calibration Points
ID/ Sl. No.    
Master Used For Calibration  
Results of Both Engineers
Results Uncertainty (+/-) Results Uncertainty (+/-) En Value
Sr.No 
Parameter Engineer-1 Engineer-2  
1           

2
         

 3          

STUDY OF CALIBRATION RESULTS


En = (X1 - X2)/√(Ua^2 + Ub^2) PASS
Calculation of En Where Ua = Measured Uncertainty of 1st
Where X1 = Observed value of 1st Calibration  
Value Calibration
Where Ub = Measured Uncertainty of 2nd
Where X2 = Observed value of 2nd Calibration  
Calibration

Checked & Approved By (TM/QM)   Page No. 01 of 01

You might also like