MARINE AND OFFSHORE

PRODUCTS AND SOLUTIONS

CONTENT
PAROC® Marine insulations ...................................................................... 3

Quality and environment ............................................................................. 4

Storage and handling .................................................................................... 4

Trusted service and advice ............................................................................ 5

Fire insulation products ................................................................................ 6

Thermal insulation products ........................................................................ 8

Insulations for air ducts and pipes ............................................................... 10

Special insulation solutions .......................................................................... 12

Paroc marine facings ..................................................................................... 14

Technical data .............................................................................................. 15

Sound absorption .......................................................................................... 16

A-class steel decks and bulkheads fire protection solutions with slabs ..... 18

A-class steel decks and bulkheads fire protection solutions with mats .... 20

A-class aluminium decks and bulkheads fire protection solutions with

slabs ................................................................................................................ 22

A-class aluminium decks and bulkheads fire protection with mat mats 24

H-class steel decks and bulkheads ............................................................... 26

Engine rooms ................................................................................................ 28

Air-conditioning machine rooms ................................................................ 29

General applications ..................................................................................... 30

The information in this brochure represents the sole and comprehensive description of the condition of the product
and its technical properties. However, the content of this brochure does not mean granting a commercial guarantee.
In so far as the product is used in an area of use which is not provided for in this brochure, we cannot warrant
its suitability for said area of use unless the suitability was expressly confirmed by us upon request. This brochure
replaces all previous brochures. As a result of constant further development of our products we reserve the right to
make alterations to brochures.

PAROC and red and white stripes are registered trademarks of Paroc Oy Ab.
© Paroc Group 2015

2
 PAROC® MARINE INSULATIONS
MEET ALL REQUIREMENTS
PAROC Marine insulations meet the temperatures. The binder starts to
requirements of their users in the evaporate when its temperature exceeds
following areas: approximately 200°C, and while the
• Fire protection of constructions insulating properties remain unchanged,
and components the compressive strength weakens.
• Heating economy of ships and The stone wool products’ softening
comfort of their passengers, heat temperature is over 1,000°C.
and cold insulations The determination of non-
• Good acoustic properties of combustibility in accordance with
constructions and devices IMO FTP Code Part 1 has been
• Insulation materials used as performed for all PAROC Marine
surface materials are functional and insulations. Continuous quality control
easy to clean of the products is performed by VTT
• Meeting the requirements of (Technical Research Centre of Finland).
Classification Institutes and National
Marine Authorities in accordance Construction approvals
with the rules and regulations of IMO Fire constructions used within
and the Marine Equipment Directive shipbuilding must be tested for their
(modules B and D). fire resistance, in accordance with
the rules and regulations of the IMO
(International Maritime Organisation).
The shipbuilding industry sets very high PAROC – The expert in insulation Based on the approved test result, the
requirements for safety and comfort on materials Classification Institutes and National
board. Products and constructions to be Through market knowledge and Marine Authorities grant the required
used for fire protection must be tested research conducted alongside our approvals.
and approved according to the rules customers, Paroc has secured its strong For this purpose, the products have
and regulations of IMO (International position as a manufacturer of insulating been tested in various A- and H-class
Maritime Organisation). materials. All Paroc factories have a deck and bulkhead constructions
certified quality system. and in numerous fire door and panel
Ships sail in very different conditions, constructions.
which sets high requirements for Non-combustibility PAROC products fulfil the
thermal insulations. Different kinds of PAROC Marine insulations are requirements of numerous standards
machinery and equipment, passenger manufactured from stone. Stone wool and directives such as EN, ASTM, BS
facilities, restaurants etc. need has excellent properties as a passive and MED, as well as many local ones,
sufficient sound insulation to guarantee guarantee of the fire safety of ships. such as DIN, SFS, GOST-R.
comformity. Paroc offers economical PAROC stone wool products
and safe solutions. are capable of withstanding high

3
 SOLUTIONS FOR MARINE INSULATION

QUALITY AND ENVIRONMENT

PAROC stone wool products are made from clean, natural
material. They are environmentally friendly throughout their
lifecycle, causing no harm to nature during or after use. Stone
wool does not contain any ingredients or chemicals that
prevent or impede recycling. The use of PAROC products
increases both the comfort and safety of the environment in
which they are installed, creating a better place to work – as
well as a more efficient to work – as well as a more efficient
process.

Paroc factories have been certified according to the Quality

Management System ISO 9001 and Environmental System
ISO 14001. Because of these systems, you can be sure that
products that emerge from our factories are of a consistently
high quality and are produced in a way that emphasises
environmental considerations.

HEALTH AND SAFETY

PAROC products are safe to use. No CFCs or HCFCs are
used in the production of the products. PAROC products
also fulfil NoteQ of EU Commission Directive 97/69/EC.
This means that stone wool fibres are biodegradable and are
not classified as a possible human carcinogenic. They do
not contain asbestos.
Our health and safety data sheets are available on our web
pages at www.paroc.com.

STORAGE AND HANDLING PAROC stone wool products are made from a naturally robust
material. They are easy to store and install, and safe to handle.

STORAGE
If the products are stored outdoors, they must be protected from
rain. Stack the packages on a flat platform that doesn’t touch the
ground. Cover the stacks with a waterproof tarpaulin or plastic
sheet if necessary. If the products get wet despite these measures,
they can be dried and used as normal. Stone wool dries quickly
and its becoming wet will not change its properties.
Our preformed insulation components are quick to install
and do not need much cutting work on site. Handle the product
packages in a manner that prevents damage. Care must be taken
not to break the edges or corners of the packages, especially during
unloading.

PERSONAL SAFETY EQUIPMENT

Scientific studies show that stone wool fibres do not harm your
health, but the use of protective equipment is recommended to
avoid skin irritation.
Use personal protection equipment that meets your
particular needs, and keep your work clothing separate from
your other clothing. It is also advisable to wear protective goggles
if your eyes are sensitive to dust. This is particularly important
when working with overhead insulation. If you wear contact
lenses, you should always wear close-fitting protective goggles. A
dust mask is also necessary if the amount of dust is significant.
You can read more about personal safety in insulation work
on our web pages at www.paroc.com.

4
 SOLUTIONS FOR MARINE INSULATION

TRUSTED SERVICE AND ADVICE

At Paroc, we do more than produce
high quality stone wool insulation
products - we also supply the help and
advice necessary to make your job as
easy and straightforward as possible.
We have developed a popular range of
practical tools that are as valued by
designers as they are by installers. Pocket
guides, dimensioning software, simple
explanations of laws and regulations,
and a content-rich website are just some
of the free resources that our customers
benefit from. If any of your questions
remain unanswered, please let us know
– we are always grateful for any tips on
how to make our service even better.

INSULATION EDUCATION
At Paroc, we want to share our
knowledge in order to help you get the
utmost out of our products. That’s why
we can arrange specialised training on
industrial insulation. In our seminars,
you can learn, for example, about the
purpose of insulation, the difference
between insulation for pipes and flue
ducts, and how to choose the right
solution. We also cover the guidelines
and regulations that apply o insulation
in your area. Please contact us for
further information.

PERSONAL CONTACTS FOR THE BEST

SOLUTION
Early contact with Paroc confers many
advantages when it comes to identifying
the optimal insulation solution for
your particular requirements. At the
designing and planning stage, it is
important to consider what kind of
properties the insulation solution should
possess. Paroc’s specialists are always on
hand to help and advice, and are experts
on customising products and solutions to choose, installation methods,
to fit your specific requirements. It is and laws and regulations. If there’s a
often beneficial for us to come and question that we can’t answer directly,
visit the site personally so that together we’ll ask for help from our wide network
we can ascertain the best solution and of contacts in all areas of the insulation
installation method. This helps to field.
maximise the performance and service
life of the insulation. PUNCTUAL LOGISTICS

TECHNICAL ADVICE Paroc is justifiably renowned for its

punctual logistics operation. Under
Every year we receive a lot of questions normal circumstances, you will receive
about insulation theory and products. the insulation you need shortly after
No question is too big or too small for placing the order. This is a service that
our insulation experts. We can advise on our customers value highly and have
the need to insulate, the right products come to rely on.

5
 SOLUTIONS FOR MARINE INSULATION

FIRE INSULATION PRODUCTS

FIRE INSULATION WITH FACING
A functional insulation solution for car decks and engine rooms can be achieved Fire insulation on ships must
using precoated slabs and preformed insulations. Coated products ensure a clean and meet very high requirements.
easily maintained final surface. The range of facings includes glass fibre cloths 50- Furthermore, functionality together
400 g/m2 and aluminium foils. with easy and fast installation has
The quick and easy installation of coated fire insulation ensures considerable become more and more important.
cost savings. Coated products also enable insulating facilities using more lightweight To meet these requirements,
overall solutions than before. For the user, this means quieter and more alternative solutions for different
comfortable working facilities than before. fire applications are needed.

Paroc has tested several A-class

PLAIN FIRE INSULATION constructions for decks and
Plain fire insulation is made of stone wool intended as basic material for the fire bulkheads, for steel and aluminium.
insulation solutions in shipbuilding constructions. We can offer two alternatives:
Plain insulation is used in facilities where they lie behind other constructions PAROC Marine Wired Mats or
or as insulations in rooms, where they must be protected by steel sheets (i.e. against PAROC Marine Fire Slabs, with or
mechanical stress). without facings.

PAROC MARINE FIRE SLAB 80 PREFORMED BLOCKS MADE OF PAROC PAROC MARINE WIRED MAT 80
PAROC MARINE FIRE SLAB 100 MARINE FIRE SLAB 80 AND 100 PAROC MARINE WIRED MAT 100
• Decks and bulkheads in steel and • Different kind of beams in various • Decks and bulkheads in steel and
aluminium constructions sizes aluminium constructions
• Fire doors • Used in combination with PAROC • Circular ducts
• Wall cassettes Marine Fire Slab 80 and 100 • Products with facing above
• Air-conditioning devices and ducts suspended ceilings and in
• Products with facing especially for maintenance facilities.
car decks, engine rooms and air-
conditioning machine rooms

6
SOLUTIONS FOR MARINE INSULATION

7
 SOLUTIONS FOR MARINE INSULATION

THERMAL INSULATION PRODUCTS

THERMAL INSULATION WITH FACING
Coated slabs and mats are used in facilities where they remain visible and above Insulation plays a major role in
suspended ceilings. indoor climate and comfort on
The range of facings includes several alternatives, from aluminium foil to glass board. By choosing the right
fibre cloths. thermal insulation solutions,
the optimum temperature and
energy savings can be achieved.
PLAIN THERMAL INSULATION In addition, the excellent acoustic
In shipbuilding, plain thermal insulation is used in facilities where it lies behind properties of PAROC stone wool
other constructions. can be utilized at the same time.
Mats as thermal insulation products enable multiformed constructions to be Thermal insulation together with
insulated with a good final result in terms of the heating technique. fire and sound insulation create the
basis for overall comfort.

PAROC MARINE WIRED MAT 28 PAROC MARINE SLAB 30, 40, 60 PAROC MARINE SLAB 40, HP
• Decks, bulkheads and outer • Various applications • Thermal insulation of decks,
bulkheads • Devices and tanks with flat surfaces bulkheads and outboards combined
• Products with facing above • Sound insulation above suspended with coated PAROC Marine Slab 40
suspended ceilings and in facilities ceilings
where they remain visible • With aluminium foil as condensation
• Machinery and devices with insulation and in applications where
temperature ≤ 200 °C thick insulation is required
• Products with facing in facilities
where they remain visible
• Machinery and devices.

8
SOLUTIONS FOR MARINE INSULATION

9
 SOLUTIONS FOR MARINE INSULATION

INSULATIONS FOR AIR DUCTS AND PIPES

PAROC products ensure the comfort, safety and economic efficiency of duct and pipe insulations on board. Several facing
options, fit to size pipe sections and a wide range of mats enable easy and fast installation and prepare the way for the optimum
end solution.

PAROC Marine Wired Mats are made of stone wool and are used as thermal insulation for smoke ducts and chimneys on ships.
If required, the wire net can also be made of stainless steel with a higher temperature resistance than galvanized wire netting.
Depending on the application of the PAROC Section, it can also be produced with aluminium foil or glass fibre cloth.
Thermal and condensation insulations for air-conditioning devices are coated with aluminium foil reinforced with glass
fibre. These products are ideal for the insulation of rectangular and round ducts.

PAROC HVAC SECTION ALUCOAT T PAROC PRO SECTION 100 PAROC HVAC SECTION G4
• Thermal and condensation insulation • Steam pipes PAROC PRO SECTION 100 G4
of pipes and ducts • Heating pipes • Thermal and condensation insulation
• Tape in the longitudinal seam • Fuel oil pipes of pipes and ducts
• Surface temperature of the facing • Exhaust gas pipes • For applications requiring excellent
must not exceed 80 °C • Sprinkler pipes durability from the facing e.g. on car
• Deck pipes decks, engine rooms and passages.
• Sewage pipes • The product can also be
• Maximum service temperature 640 manufactured with aluminium foil on
°C. top (facing G7). The overlapping of
• The product can also be these facings can be heat sealed.
manufactured with a density of 140
kg/m3 (PAROC Pro Section 140).

PAROC MARINE WIRED MAT 100 AND PAROC PRO LAMELLA MAT ALUCOAT PAROC MARINE MAT 35 ALUCOAT
PAROC MARINE WIRED MAT 100 ALUCOAT • Thermal and condensation insulation • Thermal and condensation insulation
• Smoke ducts and chimneys of ducts of ducts and devices
• Exhaust gas dampers • For applications where higher
• Large pipe elbows compressive strength is required
• Penetrations of air ducts

10
SOLUTIONS FOR MARINE INSULATION

11
 SOLUTIONS FOR MARINE INSULATION

SPECIAL INSULATION SOLUTIONS

Many kinds of prefabricated products, for example insulations for cabins, panels,
fire doors, ventilation machinery etc. are used in the shipbuilding industry.
Manufacturers of these products often require customer-specified and tailored
solutions.

The purpose of PAROC Marine insulations is to offer a solution for every part of the
ship where some kind of insulation is needed.
Our range of products also covers the insulating materials needed by
subcontractors within shipbuilding.

Noise reduction and fire protection

of the cabin has been achieved
by using PAROC stone wool
insulation.

PAROC MARINE SLABS PAROC MARINE SLAB 220 AND

• Wall panels and cassettes PAROC MARINE SLAB 250
• Suspended ceiling panels • Ship cabin constructions and
• Floating floors cassettes In fire doors as well as wall and
• As lamellas in wall and floor panels • Sound reduction panels ceiling panels, PAROC fire and
• Fire doors • Draught barriers thermal insulation is used.
• Doors, wall and ceiling panels

PRODUCTS:
PAROC Marine Slab 130
PAROC Marine Floor Slab 140
PAROC Marine Fire Slab 150
PAROC Marine Slab 160
PAROC Marine Slab 180

12
SOLUTIONS FOR MARINE INSULATION

13
 SOLUTIONS FOR MARINE INSULATION

PAROC MARINE FACINGS

ALUCOAT Reinforced aluminium foil facing, 62–80 g/m2 G4 White glass fibre facing with aluminium below, ~250 g/m2

ALUCOAT T Reinforced aluminium foil facing with tape on the G7 White glass fibre facing with aluminium on top, ~250 g/m2
longitudinal seam, available only on pipe sections, 62–80 g/m2

N3 Black non-woven tissue, ~60 g/m2

G1 White glass fibre facing, ~210 g/m 2

N5 Grey non-woven tissue, ~60 g/m2

G2 Black glass fibre facing, ~200 g/m2

G3 White glass fibre facing, ~430 g/m2

AluCoat AluCoat T G1 G2

G3 G4 G7 N3

N5

All PAROC Marine facings are classified as surface material with low
flame-spread characteristics.

14
 SOLUTIONS FOR MARINE INSULATION

TECHNICAL DATA
STONE WOOL MATS

Compressive Thermal conductivity (W/mK)

Maximum service
Nominal density stress (10% Mean temperature 3)
Product temperature
kg/m 3 deformation)
°C 1) 3)
kPa 10 °C 50 °C 100 °C 200 °C 300 °C

PAROC Marine Wired Mat 28 28 250 0.039

PAROC Marine Wired Mat 80 80 640 0.036 0.040 0.046 0.064 0.089

PAROC Marine Wired Mat 100 100 660 0.039 0.042 0.047 0.063 0.083
PAROC Pro Lamella Mat AluCoat 50 250 2) 0.039 0.045 0.055 0.081
PAROC Marine Mat 30 30 250 0.039

PAROC Marine Mat 35 AluCoat 35 250 2) 0.039

STONE WOOL SLABS

Compressive Thermal conductivity (W/mK)

Nominal Maximum service Mean temperature 3)
stress (10%
Product density temperature
deformation)
kg/m3 °C 1) 3)
kPa 10 °C 50 °C 100 °C 200 °C 300 °C 400 °C 500 °C 600 °C

PAROC Marine Slab 30 30 250 0.039 0.042 0.054 0.085 0.132

PAROC Marine Slab 40 40 1 350 0.037 0.042 0.054 0.085

PAROC Marine Slab 60 60 3 350 0.037 0.042 0.048 0.067

PAROC Marine Slab 80 80 10 550 0.037 0.043 0.047 0.065 0.095 0.138 0.196
PAROC Marine Fire Slab 80 80 10 550 0.037 0.043 0.047 0.065 0.095 0.138 0.196
PAROC Marine Fire Slab 100 100 10 550 0.037 0.043 0.047 0.065 0.095 0.138 0.196
PAROC Marine Slab 130 130 20 660 0.042 0.046 0.060 0.081 0.110 0.147 0.192
PAROC Marine Fire Slab 150 150 20 660 0.042 0.046 0.060 0.081 0.110 0.147 0.192
PAROC Marine Slab 160 160 40 660 0.039 0.042 0.046 0.060 0.081 0.110 0.147 0.192
PAROC Marine Slab 180 180 50 660 0.039 0.042 0.046 0.060 0.081 0.110 0.147 0.192
PAROC Marine Slab 220 220 60 660 0.047 0.050 0.058 0.071 0.087 0.107 0.131
PAROC Marine Slab 250 250 80 660 0.047 0.050 0.058 0.071 0.087 0.107 0.131

STONE WOOL PIPE SECTIONS

Thermal conductivity (W/mK)
Maximum service temperature Mean temperature 3)
Product
°C 1)
10 °C 50 °C 100 °C 150 °C 200 °C 300 °C 400 °C

PAROC Hvac Section AluCoat T 2502) 0.034 0.037 0.044 0.053 0.063 ---

PAROC Pro Section 100 640 0.040 0.046 0.064 0.092

PAROC Pro Section 140 680 0.042 0.047 0.065 0.087 0.115

1)
PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. While the insulating properties remain unchanged, the compressive stress weakens.
The softening temperature of stone wool products is over 1000 °C.
2)
The surface temperature of the facing must not exceed +80 °C (temperature restriction determined in accordance with heat resistance of adhesive).
3)
Values declared by the manufacturer.
See product data sheets for dimensions and other information.

15
 SOLUTIONS FOR MARINE INSULATION

SOUND ABSORPTION*
Values tested in accredited testing laboratories according to EN ISO 354:2003 and EN ISO 11654:1997.

50 mm 50 mm

100 mm 100 mm

PAROC Marine Fire Slab 100 G1**

25 mm 25 mm

50 mm 50 mm

75 mm 75 mm

100 mm 100 mm

30 mm 30 mm

50 mm 50 mm

80 mm 80 mm

100 mm 100 mm

PAROC Marine Wired Mat 28

50 mm

100 mm

* The following sound attenuation measurements are done by certified

Laboratories.
** Estimated values based on existing results.

16
 SOLUTIONS FOR MARINE INSULATION

25 mm 25 mm

50 mm 50 mm

100 mm 100 mm

50 mm 15 mm

60 mm 30 mm

Weighted absorption, Weighted absorption,

Product Product
‌α w
Absorption class
‌α w
Absorption class

PAROC Marine Slab 40, 50 mm 0.85 (H) B PAROC Marine Wired Mat 100 G1, 30 mm 0.80 B
PAROC Marine Slab 40, 100 mm 1.00 A PAROC Marine Wired Mat 100 G1, 50 mm 0.75 C
PAROC Marine Slab 40 G3, 50 mm 0.70 (L) C PAROC Marine Wired Mat 100 G1, 80 mm 0.70 C
PAROC Marine Slab 40 G3, 100 mm 0.70 (L) C PAROC Marine Wired Mat 100 G1, 100 mm 0.70 C
PAROC Marine Fire Slab 100, 25 mm 0.55 D PAROC Marine Wired Mat 28, 50 mm 0.75 (H) C
PAROC Marine Fire Slab 100, 50 mm 1.00 A PAROC Marine Wired Mat 28, 100 mm 1.00 A
PAROC Marine Fire Slab 100, 75 mm 1.00 A PAROC Marine Slab 130, 25 mm 0.50 (HH) D
PAROC Marine Fire Slab 100, 100 mm 1.00 A PAROC Marine Slab 130, 50 mm 0.85 (H) B
PAROC Marine Fire Slab 100 G1, 25 mm 0.75 C PAROC Marine Slab 130, 100 mm 0.85 (H) B
PAROC Marine Fire Slab 100 G1, 50 mm 0.75 C PAROC Marine Slab 160, 25 mm 0.50 (MH) D
PAROC Marine Fire Slab 100 G1, 75 mm 0.70 C PAROC Marine Slab 160, 50 mm 0.85 (H) B
PAROC Marine Fire Slab 100 G1, 100 mm 0.70 C PAROC Marine Slab 160, 100 mm 0.80 (H) B
PAROC Marine Wired Mat 100, 30 mm 0.80 (H) B PAROC Marine Floor Slab 140, 50 mm 0.80 (H) B
PAROC Marine Wired Mat 100, 50 mm 1.00 A PAROC Marine Floor Slab 140, 60 mm 0.85 (H) B
PAROC Marine Wired Mat 100, 80 mm 1.00 A PAROC Marine Slab 220, 15 mm 0.90 (MH) D
PAROC Marine Wired Mat 100, 100 mm 1.00 A PAROC Marine Slab 220, 30 mm 0.70 (H) C

17
 SOLUTIONS FOR MARINE INSULATION

A-CLASS STEEL DECKS AND BULKHEADS

FIRE PROTECTION SOLUTIONS WITH SLABS

1
3 Notice!
4
6
5 PAROC Marine Fire Slabs can
be covered with aluminium foil
or with black or white glass fibre
facing.
2

Notice!
7
Only rule for pinning is that the
maximum distance between the pins
is 300 mm.

Notice!
Only 2 products to cover all 4
9 solutions in A60 and A30.

Nominal IMO 2010 FTPC

Class Product density
Sound reduction Rw
kg/m3 Insulating thickness level/stiffener, mm*
(C, Ctr), dB
STEEL DECKS:
1 A60 PAROC Marine Fire Slab 100 100 40/25 50/25 49 (-1, -6)
A30 PAROC Marine Fire Slab 100 100 25/25 25/25 48 (-1, -5)
NEW A30 PAROC Marine Fire Slab 80 80 40/40 (160mm along the stiffener)
NEW A15 PAROC Marine Fire Slab 80 80 40/0
STEEL BULKHEADS:
2 A60 PAROC Marine Fire Slab 100 100 60/25 75/25 or 50+25/25 51 (-1, -6)
PAROC Marine Fire Slab 100 /
NEW A60 100 75/30 51 (-1, -6)
PAROC Marine Wired Mat 100
A30 PAROC Marine Fire Slab 100 100 40/25 50/25 49 (-1, -6)
NEW A15 PAROC Marine Fire Slab 80 80 40/0
PRODUCTS TO USE WITH STIFFENERS:
3 PAROC Marine Fire Slab 100, HP 100
4 PAROC Marine Fire Slab 100, HPL 100
5 PAROC Marine Fire Slab 100, T 100
6 PAROC Marine Fire Slab 100, L 100
7 PAROC Marine Fire Slab 100, Pulb 100
8 PAROC Marine Fire Slab 100, T 100

FLOATING FLOOR:
Insulating thickness, mm
9 A60 PAROC Marine Floor Slab 140 140 50
* Please check validity of the certification from Paroc sales.

18
 SOLUTIONS FOR MARINE INSULATION

STEEL DECKS A60, A30 AND A15

Example of A60 class solution for steel Example of A30 class solution for Example of A30 class solution for steel
deck with PAROC Marine Fire Slab steel deck with PAROC Marine Fire deck with PAROC Marine Fire Slab 80
100 G1 and preformed block PAROC Slab 100 G1 and preformed block G1. Insulating thickness on deck is 40
Marine Fire Slab 100 G1, HPL. PAROC Marine Fire Slab 100 G1, mm and on stiffener 40 mm (160 mm
Insulating thickness on deck is 40 mm HPL. Insulating thickness on deck and along the stiffener).
and on stiffener 25 mm. stiffener is 25 mm.

IMO 2010 FTPC 50/25 mm. IMO 2010 FTPC 25/25 mm. IMO 2010 FTPC 40/40, 160 mm
along the stiffener.

Example of A15 class solution for steel

deck with PAROC Marine Fire Slab 80
G1. Insulating thickness on deck is 40
mm. No insulation on stiffener.

IMO 2010 FTPC 40/0 mm.

STEEL BULKHEADS A60, A30 AND A15

Example of A60 class solution for steel Example of A30 class solution for steel Example of A15 class solution for
bulkhead with PAROC Marine Fire bulkhead with PAROC Marine Fire steel bulkhead with PAROC Marine
Slab 100 and preformed block PAROC Slab 100 and preformed block PAROC Fire Slab 80. Insulating thickness on
Marine Fire Slab 100, Pulb. Insulating Marine Fire Slab 100, Pulb. Insulating bulkhead is 40 mm. No insulation on
thickness on bulkhead is 60 mm and thickness on bulkhead is 40 mm and on stiffener.
on stiffener 25 mm. stiffener 25 mm.

IMO 2010 FTPC 75/25 IMO 2010 FTPC 50/25 mm. IMO 2010 FTPC 40/0 mm.
or 50+25/25 mm.

19
 SOLUTIONS FOR MARINE INSULATION

A-CLASS STEEL DECKS AND BULKHEADS

FIRE PROTECTION SOLUTIONS WITH MATS

Notice!
PAROC Marine Wired Mats can
1 be covered with aluminium foil
or with black or white glass fibre
clothing.

Notice!
Only rule for pinning is that the
2
maximum distance between the
pins is 300 mm.

IMO 2010 FTPC

Nominal
Class Product density Sound reduction Rw
kg/m3 Insulating thickness level/stiffener, mm*
(C, Ctr), dB
STEEL DECKS:
1 A60 PAROC Marine Wired Mat 100 100 40/40 40/40 50 (-1, -5)**
A30 PAROC Marine Wired Mat 80 80 30/30 30/30 49 (-1, -5)
A15 PAROC Marine Wired Mat 80 80 30/30 30/30 49 (-1, -5)
STEEL BULKHEADS:
2 A60 PAROC Marine Wired Mat 100 100 80/30 80/30 or 40+40/30 or 50+30/30 51 (-2, -6)
PAROC Marine Fire Slab 100 /
NEW A60 PAROC Marine Wired Mat 100
100 75/30 51 (-1, -6)

A30 PAROC Marine Wired Mat 100 100 40/30 50/30 50 (-1, -6)
A15 PAROC Marine Wired Mat 80 80 30/30
* Please check validity of the certification from Paroc sales.
** Estimation based on a set of testing

20
 SOLUTIONS FOR MARINE INSULATION

STEEL DECKS A60, A30 AND A15

Example of A60 class solution for steel Example of A30 class solution for steel Example of A15 class solution for steel
deck with PAROC Marine Wired Mat deck with PAROC Marine Wired Mat deck with PAROC Marine Wired Mat
100 G2, insulating thickness 40 mm. 80 G2, insulating thickness 30 mm. 80 G2, insulating thickness 30 mm.

IMO 2010 FTPC 40/40 mm. IMO 2010 FTPC 30/30 mm. IMO 2010 FTPC 30/30 mm.

STEEL BULKHEADS A60, A30 AND A15

Example of A60 class solution for steel Example of A30 class solution for steel Example of A15 class solution for steel
bulk-head with PAROC Marine Wired bulk-head with PAROC Marine Wired bulk-head with PAROC Marine Wired
Mat 100. Insulating thickness on Mat 100. Insulating thickness on Mat 80, insulating thickness 30 mm.
bulkhead is 80 mm and on stiffener 30 bulkhead is 40 mm and on stiffener 30
mm. mm.

IMO 2010 FTPC 80/30 or IMO 2010 FTPC 50/30 mm.

40+40/30 or 50+30/30 mm.

21
 SOLUTIONS FOR MARINE INSULATION

A-CLASS ALUMINIUM DECKS AND BULKHEADS

FIRE PROTECTION SOLUTIONS WITH SLABS

Notice!

3 1 PAROC Marine Fire Slab 100 can

4 be covered with aluminium foil
5 or with black or white glass fibre
clothing.

2
Notice!
Only rule for pinning is that the
maximum distance between the
6 pins is 300 mm.

Nominal Insulating thickness level/stiffener, mm*

Class Product density
kg/m3 IMO 2010 FTPC

ALUMINIUM DECKS:
1 A60 PAROC Marine Fire Slab 100 100 25 + 25/25 + 25 25 + 25/25 + 25

ALUMINIUM BULKHEADS:
2 30 + 30/30 + 30 40 + 40/40 + 40
A60 PAROC Marine Fire Slab 100 100
on both sides on both sides
PRODUCTS TO USE WITH STIFFENERS:
3 PAROC Marine Fire Slab 100, HP 100

4 PAROC Marine Fire Slab 100, HPL 100

5 PAROC Marine Fire Slab 100, T 100

6 PAROC Marine Fire Slab 100, L 100

* Please check validity of the certification from Paroc sales.

22
 SOLUTIONS FOR MARINE INSULATION

ALUMINIUM DECK A60 ALUMINIUM BULKHEAD A60

Example of A60 class solution for aluminium deck with Example of A60 class solution for aluminium bulkhead with
PAROC Marine Fire Slab 100 G1 and preformed blocks, PAROC Marine Fire Slab 100 G1 and preformed blocks,
insulating thickness is 25 + 25 mm. insulating thickness is 30 + 30 mm on both sides.

IMO 2010 FTPC 25 + 25/25+25 mm. IMO 2010 FTPC 40+40/40+40 mm on both sides.

23
 SOLUTIONS FOR MARINE INSULATION

A-CLASS ALUMINIUM DECKS AND BULKHEADS

FIRE PROTECTION SOLUTIONS WITH MATS

Notice!
1
PAROC Marine Wired Mats can
be covered with aluminium foil
or with black or white glass fibre
clothing.

Notice!
2 Only rule for pinning is that the
maximum distance between the
pins is 300 mm.

Nominal Insulating thickness level/stiffener, mm*

Class Product density
kg/m3 IMO 2010 FTPC

ALUMINIUM DECKS:
1 A60 PAROC Marine Wired Mat 100 100 50/50 50/50

ALUMINIUM BULKHEADS:
2 60/60 60/60
A60 PAROC Marine Wired Mat 100 100
on both sides on both sides
* Please check validity of the certification from Paroc sales.

24
 SOLUTIONS FOR MARINE INSULATION

ALUMINIUM DECK A60 ALUMINIUM BULKHEAD A60

Example of A60 class solution for aluminium deck with Example of A60 class solution for aluminium bulkhead with
PAROC Marine Wired Mat 100, insulating thickness 50 mm. PAROC Marine Wired Mat 100, insulating thickness is 60
mm on both sides.

IMO 2010 FTPC 50/50 mm. IMO 2010 FTPC 60/60 mm on both sides.

25
 SOLUTIONS FOR MARINE INSULATION

H-CLASS STEEL DECKS AND BULKHEADS

Notice!
PAROC Marine Fire Slab 100 can
be covered with aluminium foil
or with black or white glass fibre
clothing.

Nominal density Insulating thickness

Class Product kg/m3 level/stiffener, mm
STEEL DECKS:
H120 PAROC Marine Fire Slab 100 100 60 + 60/60 + 60
H60 PAROC Marine Fire Slab 100 100 45 +45/45 + 45

STEEL BULKHEADS:
H120, restricted, fire against insulated side PAROC Marine Fire Slab 100 100 60 + 60/60 + 60
H60, restricted, fire against insulated side PAROC Marine Fire Slab 100 100 50 + 50/50 + 50

26
 SOLUTIONS FOR MARINE INSULATION

STEEL DECK H120 STEEL DECK H60

Example of H120 class solution for steel decks with PAROC Example of H60 class solution for steel decks with PAROC
Marine Fire Slab 100, insulating thickness on deck and Marine Fire Slab 100, insulating thickness on deck and
stiffener is 60 + 60 mm. stiffener is 45 + 45 mm.

STEEL BULKHEAD H120, STEEL BULKHEAD H60,

RESTRICTED, FIRE AGAINST INSULATED SIDE RESTRICTED, FIRE AGAINST INSULATED SIDE

Example of H120 class solution for steel bulkheads with Example of H60 class solution for steel bulkheads with
PAROC Marine Fire Slab 100 G1, insulating thickness on PAROC Marine Fire Slab 100 G1, insulating thickness on
bulkhead and stiffener is 60 + 60 mm. bulkhead and stiffener is 50 + 50 mm.

27
 SOLUTIONS FOR MARINE INSULATION

ENGINE ROOMS

2
5

Nominal Insulating thickness level/stiffener, mm*

Class Product density
kg/m3 IMO 2010 FTPC

DECKS:
1 PAROC Marine Fire Slab 100
A60 100 40/25 50/25
+ white glass fibre facing

BULKHEADS:
2 PAROC Marine Fire Slab 100
A60 100 60/25 75/25 or 50+25/25
+ white glass fibre facing

PIPES (VAPOUR, HEATING, FUEL OIL, SEWAGE, WARM WATER, ETC.):

3 PAROC Pro Section 100 G4 or G7 100

EXHAUST PIPE:
4 PAROC Marine Wired Mat 100 100 80

EXHAUST PIPE DAMPERS:

5 PAROC Marine Wired Mat 100 100 80 + 80

28
 SOLUTIONS FOR MARINE INSULATION

AIR-CONDITIONING MACHINE ROOMS

Nominal density Insulating thickness

Class Product kg/m3 level/stiffener, mm
DECKS:
1 PAROC Marine Slab 40
A0 40 50/50
+ white glass fibre facing

BULKHEADS:
2 PAROC Marine Wired Mat 28
A0 28 50/50
+ white glass fibre facing

AIR CONDITIONING DUCTS:

3 PAROC Pro Lamella Mat AluCoat 50 25

PIPES (COOLING AND COLD WATER):

4 PAROC Hvac Section AluCoat T 20 - 50

29
 SOLUTIONS FOR MARINE INSULATION

GENERAL APPLICATIONS

1 2

10
8
5

6
9

11

Nominal Insulating thickness level/stiffener, mm*

Class Product density
kg/m3
IMO 2010 FTPC
DECKS:
1 A60 PAROC Marine Fire Slab 100 100 40/25 50/25
2 A60 PAROC Marine Fire Slab 100 + black glass fibre facing 100 40/25 50/25

BULKHEADS:
3 Thermal PAROC Marine Wired Mat 28 28 50 - 100/50 - 100
Thermal PAROC Marine Slab 40 40 50/50

CABIN:
Wall 4 B15** PAROC Marine Slab 220 + grey non-woven tissue 220 15
Roof 5 B15** PAROC Marine Slab 80 80 70
Door 6 B15** PAROC Marine Slab 160 160 40

CORRIDOR:
Wall 7 B15** PAROC Marine Slab 160 160 15
Roof 8 Sound PAROC Marine Slab 80 80 25
Door 9 A60** PAROC Marine Slab LO 150 150 70
Wall extension 10 B15** PAROC Marine Slab 220 + grey non-woven tissue 220 10 + 10

FLOATING FLOOR:
11 A60 PAROC Marine Floor Slab 140 140 50
*Please check the validity of the certification from Paroc sales.
** An example of customer constructions where PAROC products are used.

30
Paroc is the leading manufacturer of energy-efficient insulation solutions in the Baltic Sea region. The cornerstones
of our operations are customer and personnel orientation, constant innovation, profitable growth and sustainable
development. Paroc products include building insulation, technical insulation, marine and offshore insulation, sand-
wich panels and acoustic products. The products are manufactured in Finland, Sweden, Lithuania and Poland and
as of 2013 also in Russia. Paroc has sales and representative offices in 14 European countries.

Building Insulation offers a wide range of products and solutions for all
traditional building insulation. The building insulation products are mainly
used for the thermal, fire and sound insulation of exterior walls, roofs,
floors and basements, intermediate floors and partitions.

Sound absorbing ceilings and wall panels for interior acoustic control, as
well as industrial noise control products, are available in the range.

Technical Insulation products are used for thermal, fire and sound
insulation in HVAC systems, industrial processes and pipe work, industrial
equipment as well as shipbuilding and offshore industry.

Sandwich panels are fire proof lightweight steel-faced panels with a core
material of stone wool. Paroc panels are used for façades, partitions and
ceilings in public, commercial and industrial buildings.

PAROC OY AB
The information in this data sheet describes the conditions and technical properties December 2015
of the disclosed products, valid at the time of publication of this document and until ©
Paroc Group 2015 Technical Insulation
replaced by the next printed or digital version. The latest version of this data sheet 1185TIEN1215 P.O. Box 240, FI-00181 Helsinki, Finland
is always available on the Paroc website. Our information material presents applic-
ations for which the functions and technical properties of our products have been
Tel. +358 46 876 8000
approved. However, the information does not mean a commercial guarantee. We do Fax +358 46 876 8002
not assume liability of the use of third party components used in the application or [email protected]
the installation of our products. We cannot warrant the suitability of our products if
used in an area or conditions which are not provided in our information material. As www.paroc.com
a result of constant further development of our products we reservethe right to make
alterations to our information material at any time.
PAROC is a registered trademark of Paroc Group. A MEMBER OF PAROC GROUP