JOHN DEERE TURF & UTILITY PRODUCTS

EQUIPMENT FOR COMPACT UTILITY TRACTORS

260 Backhoe
Equipment for Base Machine

6 ft. 2 In. (1.89 m) Digging Swivel Seat Bracket

Depth Transport Locking Pins
One Double Acting Swing Cylinder Hydraulic Stabilizers
150 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve
Hydraulics

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

1165LV 260 Backhoe 6,118.00

For 1023E and 1025R Tractors built on or before July 14, 2017. Also for 1026R and 2305
OOS Tractors. Tractors Must be Equipped with a Front Loader and a Power Beyond
Hydraulic kit LVB25956 (except 2305). Only 17 digit Serial No. 260 backhoes (with
updated mainframe) are compatible with 1023E, 1025R, and 1026R.

DESTINATION
0184 Canada Same Price

0195 Mexico Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

Spanish/French Canadian North American Operator's Manual and Decal Kit.

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
For 1023E Tractors built on or before July 14, 2017. Power Beyond kit LVB25956 is

01 August 2018 U.S.

C-25- 1
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
260 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

required on tractor and must be purchased separately.

1001 Subframe Mounting -97.00

For 2305 Tractors.
This kit includes Power Beyond Hydraulics.
AM105466 and AM105467 couplers are required and must be ordered separately.

1002 Subframe Mounting Same Price

For 1025R Tractors built on or before July 14, 2017. Also for 1026R Tractors. Power
Beyond kit LVB25956 is required on tractor and must be purchased separately.

1995 Less Subframe Mounting -1,182.00

BUCKETS
3008 8 In. Bucket In Base Price
0.42 Cu. Ft.

3012 12 In. Bucket 60.00

0.66 Cu. Ft.

3016 16 In. Bucket 104.00

0.90 Cu. Ft.

3995 Less Bucket -337.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
LVB25956 Power Beyond Kit (1023E, 1025R, 1026R) 176.00
For 1023E and 1025R Tractors built on or before July 14th, 2017. Also for all 1026R
Tractors.

Miscellaneous
BLV10025 12 In. Bucket (0.66 Cu. Ft.) 467.50

BLV10026 16 In. Bucket (0.90 Cu. Ft.) 519.20

BLV10024 8 In. Bucket (0.42 Cu. Ft.) 397.10

BLV10986 Rubber Street Pad Kit 139.70

LVB24982 Stabilizer Cylinder Protection Kit 125.40

BLV10836 Subframe Mounting (For 1023E Tractors) 1,392.60

For 1023E Tractors built on or before July 14th, 2017.
Power Beyond kit LVB25956 is required on tractor.

BLV10835 Subframe Mounting (For 1025R, 1026R Tractors) 1,392.60

For 1025R Tractors built on or before July 14th, 2017. Also for all 1026R Tractors.
Power Beyond kit LVB25956 is required on tractor.

BLV10837 Subframe Mounting/Power Beyond Hydraulics Kit (For 2305 Tractors with 260 1,278.20
Backhoe)

01 August 2018 U.S.

C-25- 2
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
260B Backhoe
Equipment for Base Machine

6 ft. 2.5 In. (1.892 m) Digging Hydraulics

Depth on 1023E/1025R 8 In. Bucket
6 ft. 0 In. (1.830 m) Digging Integrated Operator's Seat
Depth on 2025R Transport Locking Pins With
One Double Acting Swing Integrated Storage Location
Cylinder Accessible From Seated Position
150 Degree Swing Hydraulic Stabilizers With
Narrow Control Console Automatic Locking
Two Lever Control Unlockable From Seated Position
Six Spool Control Valve Subframe Mounting

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

1230LV 260B Backhoe 6,212.00

For 1023E and 1025R Tractors built after July 14, 2017. Also for MY '17 2025R and
newer tractors. Tractors Must be Equipped with a Front Loader and a Power Beyond
Hydraulic kit (refer to Tractor price pages for kit numbers).

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1001 Subframe Mounting In Base Price
For 1023E and 1025R Tractors built after July 14, 2017. Tractors Must be Equipped with
a Front Loader and a Power Beyond Hydraulic kit (refer to Tractor price pages for kit
numbers). Tire chains are not compatible with backhoe.

1002 Subframe Mounting Same Price

For MY '17 and newer 2025R Tractors. Tractors Must be Equipped with a Front Loader
and a Power Beyond Hydraulic kit (refer to Tractor price pages for kit numbers). Tire
chains are not compatible with backhoe.

BUCKETS

01 August 2018 U.S.

C-25- 3
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
260B Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

BUCKETS Continued...
3008 8 In. Bucket In Base Price
0.42 Cu. Ft.

3012 12 In. Bucket 60.00

0.66 Cu. Ft.

3016 16 In. Bucket 104.00

0.90 Cu. Ft.

3995 Less Bucket -337.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10929 Power Beyond Kit 176.00
For use on 1023E and 1025R Tractors built after July 14th, 2017. Includes Rear Mounted
Hydraulic Couplers and Hose.
Not compatible with Rear Hydraulic Kit (BLV10948)
Not compatible with Third SCV Kit (BLV10984).

BLV10746 Power Beyond Kit 176.00

For use on MY2017 and Newer 2025R Tractors.
Not compatible with Rear Hydraulic Kit (BLV10775).
Not compatible with Third SCV Kit (BLV11025).

Miscellaneous
BLV10025 12 In. Bucket (0.66 Cu. Ft.) 467.50

BLV10026 16 In. Bucket (0.90 Cu. Ft.) 519.20

BLV10024 8 In. Bucket (0.42 Cu. Ft.) 397.10

BLV10750 Mechanical Thumb 629.20

Not compatible with 8 In. Bucket (BLV10024).

BLV10986 Rubber Street Pad Kit 139.70

Mountings, Hydraulics And Subframe

BLV10944 Subframe Mounting 1,392.60
For 1023E and 1025R Tractors built after July 14th, 2017. Also for Model Year 2017 and
newer 2025R Tractors.
Power Beyond kit BLV10929 is required on 1023E and 1025R Tractors.
Power Beyond kit BLV10746 is required on Model Year 2017 and newer 2025R Tractors.

01 August 2018 U.S.

C-25- 4
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
270A Backhoe
Equipment for Base Machine

7 ft. Digging Depth Hydraulic Stabilizers

One Double Acting Swing Bucket (See Code Selection)
Cylinder Subframe Mounting (See Code
150 Degree Swing Selection)
Narrow Control Console Transport Locks
Two Lever Control
Six Spool Control Valve
Hydraulics
Operator's Seat

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6155LV 270A Backhoe 8,351.00

For MY16 and older 2025R Tractors. Also for 2320 OOS Tractors. Tractors Must be
Equipped with a Front Loader and Power Beyond Kit. Mechanical mower lift system will
not work with backhoe mounted.

DESTINATION
0184 Canada Same Price

0195 Mexico Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
For MY2016 and older 2025R Tractors. Also for 2320 Tractors. Tractors must be
equipped with a front loader and power beyond kit. Mechanical mower lift system will not

01 August 2018 U.S.

C-25- 5
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
270A Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

work with backhoe mounted.

BUCKETS
3008 8 In. Bucket In Base Price
0.42 Cu. Ft.

3012 12 In. Bucket 60.00

0.66 Cu. Ft.

3016 16 In. Bucket 104.00

0.90 Cu. Ft.

ATTACHMENTS FOR FIELD CONVERSION

Miscellaneous
BLV10025 12 In. Bucket (0.66 Cu. Ft.) 467.50

BLV10026 16 In. Bucket (0.90 Cu. Ft.) 519.20

BLV10024 8 In. Bucket (0.42 Cu. Ft.) 397.10

BLV10750 Mechanical Thumb 629.20

Not compatible with 8 In. Bucket (BLV10024).

BLV10986 Rubber Street Pad Kit 139.70

BLV10639 Subframe Mounting Kit (For 2025R and 2320 Tractors with 270A backhoe) 1,497.10

01 August 2018 U.S.

C-25- 6
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
46 Backhoe
Equipment for Base Machine

6.5 ft. (2.0 m) Digging Depth Operator's Seat with

Two Double Acting Swing Transport Lock
Cylinders Hydraulic Stabilizers with
180 Degree Swing Flip-Over Pads
Narrow Control Console Bucket (See Code Selection)
Two Lever Control Subframe Mounting (See Code
Six Spool Control Valve Selection)
Hydraulics

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

1155LV 46 Backhoe 7,684.00

For MY16 and older 2025R and 2032R Tractors. Also for 2520 and 2720 Tractors. The 46
Backhoe is not Compatible with a Mid-Mount Mower Deck, See Sales Manual.

DESTINATION
0184 Canada Same Price

0195 Mexico Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price
English/Spanish Operator's Manual. Decal kit not included.

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

English/Spanish Operator's Manual. Decal kit not included.

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
For MY2016 and older 2032R Tractors. Also for 2520 and 2720 Tractors.

01 August 2018 U.S.

C-25- 7
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
46 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

1002 Subframe Mounting Same Price
For MY '16 and older 2025R Tractors.Tractors Must be Equipped with a Front Loader
and a Power Beyond Hydraulic kit (refer to Tractor price pages for kit numbers).

1995 Less Subframe Mounting -1,045.00

BUCKETS
3009 9 In. Bucket In Base Price
0.64 Cu. Ft.

3013 13 In. Bucket 51.00

1.04 Cu. Ft.

3016 16 In. Bucket 84.00

1.33 Cu.Ft.

3020 20 In. Bucket 166.00

1.74 Cu. Ft.

3024 24 In. Bucket 227.00

2.14 Cu. Ft.

3995 Less Bucket -378.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10381 Power Beyond Kit 482.90
Not Compatible with Third SCV kit BLV10731/LVB26166.
Includes Rear Mounted Hydraulic Couplers and Hose for Use with Backhoe on MY '16
and Older 2025R, MY '16 and Older 2032R, 2320, 2520, 2720, 4100, 4110, and 4115
Tractors Equipped with Dual SCV.

Miscellaneous
BM19558 13 In. Bucket (1.04 Cu. Ft.) 506.00

BM19559 16 In. Bucket (1.33 Cu. Ft.) 544.50

BM19560 20 In. Bucket (1.74 Cu. Ft.) 641.30

BM19561 24 In. Bucket (2.14 Cu. Ft.) 712.80

BM19557 9 In. Bucket (0.64 Cu. Ft.) 445.50

LVB24842 Subframe Mounting Kit (For 2025R, 2320 Tractors with 46 Backhoe) 1,232.00

LVB25883 Subframe Mounting Kit (for 2032R, 2520, 2720 Tractors with 46 Backhoe) 1,232.00

Operator Environment
LVB25573 Tall ROPS Upper Hoop Kit 217.80
Required for Use with 46 Backhoe on 4100, 4110, 4115 Tractors.

01 August 2018 U.S.

C-25- 8
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
270B Backhoe
Equipment for Base Machine

7.3 ft. (2.2 m) Digging Depth 15 In. High Back Operator's Seat Selection)
One Double Acting Swing Cylinder Large Integrated Boarding Step
Cushioned Boom and Swing ROPS Mounted Grab Handle
Cylinder Transport Locking Pins
150 Degree Swing (Accessible from Seat)
Rubber Swing Bumpers Hydraulic Stabilizers (Locking)
180 Degree Bucket Rotation Mounting Provisions for
Narrow Control Console Mechanical Thumb and Street Pads
Two Lever Control with Replaceable Bushings In Key
Protective Boots Joints
Six Spool Control Valve Bucket (See Code Selection)
Hydraulics Subframe Mounting (See Code

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6190LV 270B Backhoe 8,688.00

For MY2017 and newer 2032R and 2038R OOS Tractors.

Tractors Must be Equipped with a Front Loader and a Power Beyond

Hydraulic kit BLV10881. Wheel Spacers are required if R3 Radial Tires (300/70 R20) are
installed on the tractor.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
For MY2017 and newer 2032R and 2038R OOS Tractors

BUCKETS
3008 8 In. Bucket In Base Price
0.42 Cu. Ft.

01 August 2018 U.S.

C-25- 9
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
270B Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

BUCKETS Continued...
3012 12 In. Bucket 60.00
0.66 Cu. Ft.

3016 16 In. Bucket 104.00

0.90 Cu. Ft.

3995 Less Bucket -337.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10881 Power Beyond Kit 414.70
Includes Rear Mounted Hydraulic Couplers and Hose for Use with Backhoe or other
continuous flow Attachments on MY '17 and newer 2032R and 2038R Tractors.

Miscellaneous
BLV10025 12 In. Bucket (0.66 Cu. Ft.) 467.50

BLV10026 16 In. Bucket (0.90 Cu. Ft.) 519.20

BLV10024 8 In. Bucket (0.42 Cu. Ft.) 397.10

BLV10750 Mechanical Thumb 629.20

Not compatible with 8 In. Bucket (BLV10024).

BLV10986 Rubber Street Pad Kit 139.70

BLV10594 Subframe Mounting Kit (For MY '17 and newer 2032R and 2038R Tractors with 270B 1,497.10
backhoe)
Power Beyond kit BLV10881 is required on tractor.

01 August 2018 U.S.

C-25- 10
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375 Backhoe
Equipment for Base Machine

7 ft. 8 In. (2.3 m) Digging Hydraulics

Depth Operator's Seat with Transport
Quik-Tatch Mounting Lock
Two Double Acting Swing Hydraulic Stabilizers with
Cylinders Flip-Over Pads
180 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6125LV 375 Backhoe 9,146.00

For 3120-3720, 4105, 4300-4400, 4310-4410 Cab and OOS Tractors.

Tractors Must be Equipped with a Front Loader and Power Beyond Kit. 4105 Tractor
Requires LVB25930 Parking Extension Kit. See Sales Manual for 4300-4400, 4310-4410
Tractor/Backhoe Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
Rockshaft Assist Mounting Brackets and Hardware for 3120-3720, 4105 OOS Tractors

01 August 2018 U.S.

C-25- 11
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

1001 Subframe Mounting 328.00
For 3320-3720 Cab Tractors.
Rockshaft assist mounting brackets and hardware.

1002 Subframe Mounting 515.00

Rockshaft Assist Mounting Brackets and Hardware for 4300-4400 and 4310-4410
Tractors with Heavy Duty Sub-Frame.

1995 Less Subframe Mounting -491.00

Less mounting brackets and hardware.

BUCKETS
3009 9 In. Bucket In Base Price
0.64 Cu. Ft.

3013 13 In. Bucket 51.00

1.04 Cu. Ft.

3016 16 In. Bucket 84.00

1.33 Cu.Ft.

3020 20 In. Bucket 166.00

1.74 Cu. Ft.

3024 24 In. Bucket 227.00

2.14 Cu. Ft.

3995 Less Bucket -378.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
LVB25781 Power Beyond Kit (Cab Only) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3120-3720 Cab Tractors. Not compatible with MY2011 tractors. See sales manual for
details.

LVB26069 Power Beyond Kit (Cab Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for use with Backhoe on
3120-3720 Cab Tractors. Starting with MY2011. Not backward compatible. See Sales
Manual for MY2011 serial number break.

LVB25505 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3120-3720, 4105 Open Station Tractors. Not compatible with MY2011 tractors. See sales
manual for details.

LVB26064 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3120-3720, 4105 Open Station Tractors. Only compatible with 2011 tractors and newer.
See Sales Manual for MY2011 serial number break.

Miscellaneous
BM19558 13 In. Bucket (1.04 Cu. Ft.) 506.00

BM19559 16 In. Bucket (1.33 Cu. Ft.) 544.50

01 August 2018 U.S.

C-25- 12
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM19560 20 In. Bucket (1.74 Cu. Ft.) 641.30

BM19561 24 In. Bucket (2.14 Cu. Ft.) 712.80

BM19562 36 In. Bucket (3.34 Cu. Ft.) 893.20

BM19557 9 In. Bucket (0.64 Cu. Ft.) 445.50

LVB24795 Heavy-Duty Subframe Kit 607.20

See Sales Manual for 4300-4400, 4310-4410 Tractor/Backhoe Requirements.

LVB25930 Parking Extension Kit (4105) 107.80

LVB25085 Power Beyond Kit 350.90

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4310-4410 Tractors.

LVB25221 Power Beyond Kit with RCV Filter 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4300-4400 Tractors.

LVB25611 Rockshaft Assist Mounting Brackets and Hardware (3120-3720 Open Station Tractors) 578.60

LVB26149 Rockshaft Assist Mounting Brackets and Hardware (3320-3720 Cab Tractors) 964.70

BM19564 Rockshaft Assist Mounting Brackets and Hardware (4300-4400, 4310-4410) 578.60

BLV10986 Rubber Street Pad Kit 139.70

LVB26056 Thumb 823.90

Only compatible with a 2010 model or later backhoe with a serial number
greater than LV0375X030000. Not compatible with 9 In. Budket (BM19557).

Miscellaneous
BM19556 Rubber Street Pad Kit 138.60

01 August 2018 U.S.

C-25- 13
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375A Backhoe
Equipment for Base Machine

7.5 ft. Digging Depth Hydraulic Stabilizers

170 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve Transport Locks
Hydraulics
Operator's Seat

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6165LV 375A Backhoe 9,467.00

For 3033R-3046R Cab and OOS Tractors.

Tractors Must be Equipped with a Front Loader and Power Beyond Kit.

If installing on a MY18 and newer tractors, order LVU25414 to replace the existing
tractor drawbar.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
Rockshaft Assist Mounting Brackets and Hardware for 3033R-3046R Tractors (Open
Operator Station Only).

01 August 2018 U.S.

C-25- 14
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375A Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

1001 Subframe Mounting Same Price
Rockshaft Assist Mounting Brackets and Hardware for 3033R-3046R Tractors (Cab
Only).

BUCKETS
3009 9 In. Bucket In Base Price
0.684 Cu. Ft.

3012 12 In. Bucket 67.00

1.12 Cu.Ft.

3016 16 In. Bucket 155.00

1.50 Cu. Ft.

3018 18 In. Bucket 273.00

Heavy Duty Bucket: 1.69 Cu. Ft.

3020 20 In. Bucket 244.00

1.88 Cu. Ft.

3024 24 In. Bucket 332.00

2.26 Cu. Ft.

3995 Less Bucket -454.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
LVB26064 Power Beyond Kit (OOS Only) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3033R-3046R Open Station Tractors. See Sales Manual (SCV Reference Table) or
ordering details.

BLV10462 Power Beyond Kit (Cab Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3033R-3046R Cab Tractors. See Sales Manual (SCV Reference Table) or ordering details.

Miscellaneous
BLV10339 12 In. Bucket (1.12 Cu Ft.) 613.80

BLV10340 16 In. Bucket (1.50 Cu. Ft.) 717.20

BLV10343 18 In. Heavy Duty Bucket (1.69 Cu. Ft) 856.90

BLV10341 20 In. Bucket (1.88 Cu. Ft.) 822.80

BLV10342 24 In. Bucket (2.26 Cu. Ft.) 926.20

BLV10338 9 In. Bucket (0.684 Cu. Ft) 534.60

BLV10353 Mechanical Thumb 708.40

01 August 2018 U.S.

C-25- 15
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
375A Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BLV10460 Rockshaft Assist Mounting Brackets and Hardware for 3033R-3046R Tractors (OOS 1,240.80
Only)
For 3033R-3046R Tractors (Cab and OOS).

For Cab Tractors, also order BLV10652, Supplemental Hardware Kit for Subframe
Mounting on Cab Tractors.

BLV10986 Rubber Street Pad Kit 139.70

BLV10652 Supplemental Hardware Kit for Subframe Mounting on Cab Tractors 221.10
For 3033R-3046R Tractors (Cab Only).
Also requires Subframe Mounting Brackets and Hardware (BLV10460).

Miscellaneous
BM19556 Rubber Street Pad Kit 138.60

Mountings, Hydraulics And Subframe

BLV11093 Supplemental Hardware Kit for Subframe Mounting on Cab Tractors 221.10
For 3033R-3046R Cab Tractors built on or after October 24 2017.
Also requires Subframe Mounting Brackets and Hardware (BLV10460).

01 August 2018 U.S.

C-25- 16
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
385A Backhoe
Equipment for Base Machine

8.5 ft. Digging Depth Hydraulic Stabilizers

170 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve Transport Locks
Hydraulics
Operator's Seat

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6175LV 385A Backhoe 10,239.00

For 3033R-3046R OOS Tractors.

Tractors Must be Equipped with a Front Loader and Power Beyond Kit.

If installing on a MY18 and newer tractors, order LVU25414 to replace the existing
tractor drawbar.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
Rockshaft Assist Mounting Brackets and Hardware for 3033R-3046R Tractors (Open
Operator Station Only).

01 August 2018 U.S.

C-25- 17
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
385A Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

MOUNTINGS, HYDRAULICS AND SUBFRAME Continued...

1995 Less Subframe Mounting -1,053.00

BUCKETS
3009 9 In. Bucket -67.00
0.684 Cu. Ft.

3012 12 In. Bucket In Base Price

1.12 Cu.Ft.

3016 16 In. Bucket 88.00

1.50 Cu. Ft.

3018 18 In. Bucket 206.00

Heavy Duty Bucket: 1.69 Cu. Ft.

3020 20 In. Bucket 177.00

1.88 Cu. Ft.

3024 24 In. Bucket 265.00

2.26 Cu. Ft.

3995 Less Bucket -521.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
LVB26064 Power Beyond Kit (OOS Only) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3033R-3046R Open Station Tractors. See Sales Manual (SCV Reference Table) or
ordering details.

Miscellaneous
BLV10339 12 In. Bucket (1.12 Cu Ft.) 613.80

BLV10340 16 In. Bucket (1.50 Cu. Ft.) 717.20

BLV10343 18 In. Heavy Duty Bucket (1.69 Cu. Ft) 856.90

BLV10341 20 In. Bucket (1.88 Cu. Ft.) 822.80

BLV10342 24 In. Bucket (2.26 Cu. Ft.) 926.20

BLV10338 9 In. Bucket (0.684 Cu. Ft) 534.60

BLV10352 Mechanical Thumb 871.20

BLV10460 Rockshaft Assist Mounting Brackets and Hardware for 3033R-3046R Tractors (OOS 1,240.80
Only)
For 3033R-3046R Tractors (OOS Only).

BLV10986 Rubber Street Pad Kit 139.70

Miscellaneous
BM19556 Rubber Street Pad Kit 138.60

01 August 2018 U.S.

C-25- 18
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485 Backhoe
Equipment for Base Machine

8 ft. 9 In.(2.7 m) Digging Depth Operator's Seat with Transport

Quick-Tatch Mounting Locks
Two Double Acting Swing Hydraulic Stabilizers with
Cylinders Flip-Over Pads
180 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve
Hydraulics

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6135LV 485 Backhoe 10,664.00

For 3120-3720 OOS Tractors, 4120-4720 Cab and OOS Tractors, 4300-4400, 4310-4410,
4500-4700, 4510-4710, 5045E-5075E OOS Tractors 9/3 PRIOR to Final Tier 4, Final
Tier 4 5045E - 5075E OOS Tractors, and 5103-5403 OOS Tractors.

Does Not Fit Cab 3320-3720 Tractors.

CUT Tractors Must be Equipped with a Front Loader and Power Beyond Kit.

5 Series Tractors do not require a Power Beyond Kit.

Installation of LVB25628 PRT Oil Cooler Kit is Recommended for 4000 Twenty Series
Tractors with a PRT Trans. and Equipped with a Backhoe that will be used for Extended
Continuous Periods of Time.

See Sales Manual for 4300 Through 4710 Tractor/Backhoe Requirements.

For 5045E-5075E Tractors, not compatible with IOOS.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024F Norfolk Island Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

01 August 2018 U.S.

C-25- 19
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

OPERATOR'S MANUAL AND DECAL KIT Continued...

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting -449.00
For 3120-3720 OOS Tractors.
Rockshaft assist mounting brackets and hardware.

1001 Subframe Mounting In Base Price

Rockshaft Assist Mounting Brackets and Hardware for 4120-4720, 4500-4700, and
4510-4710.

4320-4720 Cab Tractors Equipped with Mid-PTO Require LVB25876 Cab/Backhoe/Mid

PTO Additional Mounting Kit. See Sales Manual for Serial Numbers.

For 4500-4700 and 4510-4710 Tractors Manufactured Before Nov. '02, See
Sales Manual for Additional Required Service Parts.

1002 Subframe Mounting 66.00

Rockshaft Assist Mounting Brackets and Hardware for 4300-4400 and 4310-4410
Tractors with Heavy Duty Sub-Frame.

1003 Subframe Mounting 1,005.00

Subframe Mounting Brackets, Hydraulics and Hardware.

5045E-5075E FT4 Tractor compatibility is limited to open operator station (OOS)

Tractors

5103-5403 Tractor compatibility is limited to tractors with serial numbers after

PY5103UO13641, PY5203U005570, PY5303U007753, and PY5403U000735.

1995 Less Subframe Mounting -940.00

Less mounting brackets and hardware.

ADAPTER FRAME FOR BACKHOE

2000 Adapter Frame Weldment Plate -68.00
For 3120-3720, 4300-4400, 4310-4410 Tractors.

2003 Adapter Frame Weldment Plate In Base Price

For 4120-4720, 4500-4700 and 4510-4710 Tractors.

2995 Less Adapter Frame Weldment Plate -974.00

BUCKETS
3012 12 In. Bucket In Base Price
1.53 Cu.Ft.

3018 18 In. Bucket 78.00

2.47 Cu. Ft.

3024 24 In. Bucket 162.00

3.48 Cu. Ft.

3995 Less Bucket -611.00

01 August 2018 U.S.

C-25- 20
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION

Buckets
LVB25173 14 in. Heavy duty bucket (1.74 cu. ft.) 797.50

LVB25174 18 in. Heavy duty bucket (2.68 cu. ft.) 876.70

LVB25175 24 in. Heavy duty bucket (3.71 cu. ft.) 980.10

Hydraulics
LVB25780 Power Beyond Kit (Cab Only) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4320-4720 Cab Tractors.

LVB26071 Power Beyond Kit (Cab Only) 414.70

Starting with MY2011. Not backward compatible. See Sales Manual for MY2011 serial
number break.

LVB25505 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3120-3720, 4105 Open Station Tractors. Not compatible with MY2011 tractors. See sales
manual for details.

LVB25512 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hose for Use with Backhoe on 4510-4710
and 4120-4720 Open Station Tractors. Not compatible with MY2011 tractors. See sales
manual for details.

LVB26064 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
3120-3720, 4105 Open Station Tractors. Only compatible with 2011 tractors and newer.
See Sales Manual for MY2011 serial number break.

LVB26066 Power Beyond Kit (OOS Only) 414.70

Includes Rear Mounted Hydraulic Couplers and Hose for Use with Backhoe on 4510-4710
and 4120-4720 Open Station Tractors. Starting with MY2011. Not backward compatible.
See Sales
Manual for MY2011 serial number break.

Miscellaneous
BM19568 12 In. Standard Bucket (1.53 Cu. Ft.) 720.50

BM19569 18 In. Standard Bucket (2.47 Cu. Ft.) 811.80

BM19570 24 In. Standard Bucket (3.48 Cu. Ft.) 910.80

LVB25613 Adapter Frame Weldment Plate (3120-3720, 4300-4400, 4310-4410) 1,068.10

LVB26163 Adapter Frame Weldment Plate (4120-4720, 4500-4700 and 4510-4710) 1,148.40

BLV10921 Backhoe Mounting Kit 2,292.40

For use on 485 backhoe in conjunction with FT4 5E 3 cylinder OOS tractors.

LVB25876 Cab/Backhoe/Mid Power Take-Off Additional Mounting Kit 119.90

Required in addition to Order Code 1003 for 4320-4720 Cab Tractors Equipped with Mid
PTO.

LVB26039 Creep to Reposition Kit 1,001.00

Only compatible with 4520 and 4720 tractors starting with Model Year 2011, and the
latest 485 Backhoe LVB26189 and Adaptor LVB26163. Ensure software is LVA16028P or
later. Previous software versions are not compatible with this kit.

01 August 2018 U.S.

C-25- 21
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485 Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB24795 Heavy-Duty Subframe Kit 607.20
Required for Use on 4300-4400, 4310-4410 Tractors with a 48, 448 or 485 Backhoe.

LVB25085 Power Beyond Kit 350.90

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4310-4410 Tractors.

LVB25220 Power Beyond Kit with RCV Filter 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4500-4700 Tractors.

LVB25221 Power Beyond Kit with RCV Filter 414.70

Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4300-4400 Tractors.

LVB25611 Rockshaft Assist Mounting Brackets and Hardware (3120-3720 Open Station Tractors) 578.60

LVB26148 Rockshaft Assist Mounting Brackets and Hardware (4120-4720. See notes below on 1,107.70
4500-4700 and 4510-4710)
4320-4720 Cab Tractors Equipped with Mid-PTO Require LVB25876 Cab/Backhoe/Mid
PTO Additional Mounting Kit.
See Sales Manual for Serial Numbers. For 4500-4700 and 4510-4710 Tractors
Manufactured Before Nov. '02, See Sales Manual for Additional Required Service Parts.

BM19564 Rockshaft Assist Mounting Brackets and Hardware (4300-4400, 4310-4410) 578.60

BLV10986 Rubber Street Pad Kit 139.70

LVB26057 Thumb 1,060.40

Only Compatible with a 2010 model or later backhoe with a serial number greater than
LV0485X030000.
Not compatible with 30.48 cm (12 In.) Standard Bucket (BM19568) or 35.56 cm (14 In.)
Heavy Duty Bucket (LVB25173).

Miscellaneous
BM19556 Rubber Street Pad Kit 138.60

Transmission
LVB25865 PowrReverser Transmission (PRT) Oil Cooler Kit 292.60
Required for 4120-4720 PRT tractors

01 August 2018 U.S.

C-25- 22
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485A Backhoe
Equipment for Base Machine

8.5 ft. Digging Depth Hydraulic Stabilizers

170 Degree Swing Bucket (See Code Selection)
Narrow Control Console Subframe Mounting (See Code
Two Lever Control Selection)
Six Spool Control Valve Transport Locks
Hydraulics
Operator's Seat

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6185LV 485A Backhoe 10,873.00

For 4044M-4066M OOS and 4044R-4066R Cab and OOS Tractors.

Tractors Must be Equipped with a Front Loader and Power Beyond Kit.

DESTINATION
0184 Canada Same Price

0195 Mexico Same Price

0202 United States In Base Price

0205 Quebec Same Price

0230 Australia Same Price

0237 New Zealand Same Price

024H United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL AND DECAL KIT

0409 English Operator's Manual and Decal Kit In Base Price

0413 French Operator's Manual and Decal Kit Same Price

0437 Spanish Operator's Manual and Decal Kit Same Price

0450 Australian Operator's Manual and Decal Kit Same Price

MOUNTINGS, HYDRAULICS AND SUBFRAME

1000 Subframe Mounting In Base Price
Rockshaft Assist Mounting Brackets and Hardware for 4044M-4066M and 4044R-4066R
Tractors (Cab and OOS).

1995 Less Subframe Mounting -1,053.00

01 August 2018 U.S.

C-25- 23
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
485A Backhoe
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

BUCKETS
3009 9 In. Bucket -67.00
0.684 Cu. Ft.

3012 12 In. Bucket In Base Price

1.12 Cu.Ft.

3016 16 In. Bucket 88.00

1.50 Cu. Ft.

3018 18 In. Bucket 206.00

Heavy Duty Bucket: 1.69 Cu. Ft.

3020 20 In. Bucket 177.00

1.88 Cu. Ft.

3024 24 In. Bucket 265.00

2.26 Cu. Ft.

3995 Less Bucket -521.00

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10039 Power Beyond Kit (Cab and OOS) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4044M/R-4066M/R Tractors. See Sales Manual (Hydraulic Ordering Guide) for ordering
details.

Miscellaneous
BLV10339 12 In. Bucket (1.12 Cu Ft.) 613.80

BLV10340 16 In. Bucket (1.50 Cu. Ft.) 717.20

BLV10343 18 In. Heavy Duty Bucket (1.69 Cu. Ft) 856.90

BLV10341 20 In. Bucket (1.88 Cu. Ft.) 822.80

BLV10342 24 In. Bucket (2.26 Cu. Ft.) 926.20

BLV10338 9 In. Bucket (0.684 Cu. Ft) 534.60

BLV10352 Mechanical Thumb 871.20

BLV10334 Rockshaft Assist Mounting Brackets and Hardware for 4044M and R-4066M and R 1,240.80
Tractors (Cab and Open Station)

BLV10986 Rubber Street Pad Kit 139.70

Miscellaneous
BM19556 Rubber Street Pad Kit 138.60

01 August 2018 U.S.

C-25- 24
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 in. Quick-Hitch Front Blade
Equipment for Base Machine

1372 mm (54 in.) Clearing Width degrees

Straight Two Adjustable Skid Shoes
1219 mm (48 in.) Clearing Width Reinforced Angle Bar on Back of
Fully Angled Blade Spring Breakaway with
Replaceable Cutting Edge Lock-Out Pin
Heavy 11-Gauge, Curved Blade
Angled Left or Right Up to 27

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

1492M 54 in. Quick-Hitch Front Blade 515.00

For 425, 445, 455, X400/X500 Heavy Duty Garden Tractors, X700s, X940s, X950R,
1023E, 1025R, 1026R, 2210, 2305, 2025R, 2026R, 2027R, model year 2013-2016 2032R,
2320, 2520, 2720, 4010, 4100, 4110 and 4115 Tractors.
BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
Compact tractors require dual selective control valve and front attaching support kit. See
Sales Manual for front attaching support requirements.
See Sales Manual for ballast requirements.

DESTINATION
0202 United States In Base Price
Requires option code 0409 English operator's manual and decal kit or option code 0437
Spanish operator's manual and decal kit.

0184 Canada Same Price

Requires option code 0409 English operator's manual and decal kit or option code 0413
French operator's manual and decal kit.

0205 Quebec Same Price

Requires option code 0413 French operator's manual and decal kit.

0195 Mexico Same Price

Requires option code 0457 Spanish operator's manual and no-text decal kit.

OPERATOR'S MANUAL
0409 English operator's manual and decal kit In Base Price

0413 French Canada operator's manual and decal kit Same Price

0437 Spanish operator's manual and decal kit Same Price

0448 English operator's manual and no-text decal kit Same Price

0457 Spanish operator's manual and no-text decal kit Same Price

FRONT QUICK-HITCH
6940 Front Quick-Hitch and Hydraulic Lift 615.00

01 August 2018 U.S.

C-25/L-35- 25
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 in. Quick-Hitch Front Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT QUICK-HITCH Continued...

For X400 and X500 Heavy Duty Garden Tractors, X700s, X940s.

6947 Front Quick-Hitch and Hydraulic Lift 638.00

For 425, 445, and 455.

6943 Front Quick-Hitch and Hydraulic Lift 656.00

For 2210 and 2305. Also requires LVB25396 front attaching support.

6950 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720, 4100, 4110, 4115).

6953 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R, and 2026R.

Includes BLV10680 front attaching support kit.

6952 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

6968 Less Front Quick-Hitch In Base Price

HYDRAULIC ANGLING
6800 Hydraulic Angling 189.00
For X400/X500 Heavy Duty Garden Tractors, X700s, X940s, and X950R.

6801 Hydraulic Angling 165.00

For 425, 445, and 455.

6802 Hydraulic Angling 191.00

For 2210 and 2305.

6803 Hydraulic Angling 198.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.

6805 Hydraulic Angling 260.00

For 1023E, 1025R, 1026R, model year 2017- 2025R, and 2026R.

6818 Less Hydraulic Angling In Base Price

ATTACHMENTS FOR FIELD CONVERSION

Front Quick-Hitch
BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14
Fits also 2210 Tractors (for 47SB only).

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

BM17347 Front quick hitch and hydraulic lift (415, 425, 445, 455) 731.89

01 August 2018 U.S.

C-25/L-35- 26
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 in. Quick-Hitch Front Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20
BM25609 hydraulic angling kit recommended

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Hydraulic Angling
BLV10880 Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 296.39

BM20922 Hydraulic angling (2210, 2305) 219.36

BM17650 Hydraulic angling (415, 425, 445, 455) 189.39

BM25609 Hydraulic angling (X400/X500 HDGTs, X700s, X940s) 217.21

LVB24901 Hydraulic angling (model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 226.84
2520, 2720, 4010, 4100, 4110, 4115)

Miscellaneous
LP54000 54-in. (137-cm) Tractor Shovel 759.00
For X400/X500 HDGTs, and X700s. See Sales Manual for specific requirements.

LVB25396 Front Attaching Support Kit (2305) 60.99

2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LP53767 Front Blade Snow Extension Kit 189.00

Pair of 9-inch extensions to lengthen 54-inch front blade to 72-inch width. For use in
snow removal applications on X400/X500 HDGT's and X700's. Not approved for dirt or
any CUT applications.

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

M42868 Front blade rubber squeegee (48-in. and 54-in. blades) 67.54
48-in. (122-cm) Front Blade requires 7 03M7188 bolts and 7 14M7273 nuts. 54-in.
(137-cm) Front Blade requires 10 03M7188 bolts and 10 14M7273 nuts.

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

LVB25302 Front-Attaching Support Kit 62.06

For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

01 August 2018 U.S.

C-25/L-35- 27
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 in. Quick-Hitch Front Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

AM119321 Heavy-duty skid shoe (1) 61.59
Optional upgrade on 48-in. (122-cm) Front Blades and 54-in. (137-cm) Quick Hitch Front
Blade. Standard equipment on 60-in. (152-cm) Quick Hitch Front Blade. Two required.

LP64664 Snow Plow Markers 24.00

Compatible with 48-in. Front Blade and 54-in. Quick Hitch Front Blade

01 August 2018 U.S.

C-25/L-35- 28
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 in. Quick-Hitch Front Blade
Equipment for Base Machine

1524 mm (60 in.) Clearing Width Two Adjustable Heavy Duty Skid
Straight Shoes
1358 mm (53.5 in.) Clearing Reinforced Angle Bar on Back of
Width Fully Angled Blade Spring Breakaway with
Replaceable Cutting Edge Lock-Out Pin
Heavy 7-Gauge, Curved Blade
Angled Left or Right Up to 27
degrees

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

9820M 60 in. Quick-Hitch Front Blade 885.00

For X400/X500 Heavy Duty Garden Tractors, X700s, X940s, X950R, 1023E, 1025R,
1026R, 2210, 2305, 2025R, 2026R, 2027R, model year 2013-2016 2032R, 2320, 2520,
2720, 4010, 4100, 4110 and 4115 Tractors.
BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors.
Compact tractors require dual selective control valve and front attaching support lit. See
Sales Manual for front attaching support requirements.
See Sales Manual for ballast requirements.

DESTINATION
0202 United States In Base Price
Requires option code 0409 English operator's manual and decal kit or option code 0437
Spanish operator's manual and decal kit.

0184 Canada Same Price

Requires option code 0409 English operator's manual and decal kit or option code 0413
French operator's manual and decal kit.

0205 Quebec Same Price

Requires option code 0413 French operator's manual and decal kit.

0195 Mexico Same Price

Requires option code 0457 Spanish operator's manual and no-text decal kit.

OPERATOR'S MANUAL
0409 English operator's manual and decal kit In Base Price

0413 French Canada operator's manual and decal kit Same Price

0437 Spanish operator's manual and decal kit Same Price

0448 English operator's manual and no-text decal kit Same Price

0457 Spanish operator's manual and no-text decal kit Same Price

FRONT QUICK-HITCH

01 August 2018 U.S.

C-25/L-35- 29
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 in. Quick-Hitch Front Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT QUICK-HITCH Continued...

6940 Front Quick-Hitch and Hydraulic Lift 615.00
For X400 and X500 Heavy Duty Garden Tractors, X700s, X940s.

6943 Front Quick-Hitch and Hydraulic Lift 656.00

For 2210 and 2305. Also requires LVB25396 front attaching support.

6950 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720, 4100, 4110, 4115).

6953 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R, and 2026R.

Includes BLV10680 front attaching support kit.

6952 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

6968 Less Front Quick-Hitch In Base Price

HYDRAULIC ANGLING
6800 Hydraulic Angling 189.00
For X400/X500 Heavy Duty Garden Tractors, X700s, X940s, and X950R.

6802 Hydraulic Angling 191.00

For 2210 and 2305.

6803 Hydraulic Angling 198.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.

6805 Hydraulic Angling 260.00

For 1023E, 1025R, 1026R, model year 2017- 2025R, and 2026R.

6818 Less Hydraulic Angling In Base Price

ATTACHMENTS FOR FIELD CONVERSION

Front Quick-Hitch
BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14
Fits also 2210 Tractors (for 47SB only).

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20
BM25609 hydraulic angling kit recommended

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

01 August 2018 U.S.

C-25/L-35- 30
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 in. Quick-Hitch Front Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Hydraulic Angling
BLV10880 Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 296.39

BM20922 Hydraulic angling (2210, 2305) 219.36

BM25609 Hydraulic angling (X400/X500 HDGTs, X700s, X940s) 217.21

LVB24901 Hydraulic angling (model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 226.84
2520, 2720, 4010, 4100, 4110, 4115)

Miscellaneous
LVB25396 Front Attaching Support Kit (2305) 60.99
2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

LVB25302 Front-Attaching Support Kit 62.06

For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

AM119321 Heavy-duty skid shoe (1) 61.59

LP64664 Snow Plow Markers 24.00

Compatible with 48-in. Front Blade and 54-in. Quick Hitch Front Blade

01 August 2018 U.S.

C-25/L-35- 31
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
366 Front Mounted Blade
Equipment for Base Machine

66 In. Blade with Spring Trip Mounting Frame

Hydraulic Angling
Skid Shoes
A-frame Quick Change System
(Common with 59 In. Snow Blower)
Hydraulic Hoses

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

6007M 366 Front Mounted Blade 3,672.00

For Model Year 2017 and newer 2032R and 2038R Tractors, 3033R-3046R Tractors and
3120-3720 Tractors.

For 3120-3720 Tractors with AutoConnect Mowers, Front Three-Point Hitch/Mid Mount
Brackets (LVB25820) are required. For 3120-3720 Tractors with the old 7-iron decks,
Front Three-Point Hitch/Mid-Mount Mower Draft Arms (LVB24810) are required.

Not for use with 4200-4410 Tractors.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

024H UM United States Minor Outlying Islands Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

FRONT HITCH
6950 Front Three-Point Hitch with A-Frame Quick Attach System In Base Price
For 3120-3720 and 3033R-3046R Tractors.

6967 Less Front Three-Point Hitch with A-Frame Quick Attach System -1,404.00

6951 Front Three-Point Hitch with A-Frame Quick Attach System Same Price
For MY2017 and newer 2032R and 2038R Tractors.

ATTACHMENTS FOR FIELD CONVERSION

Front Power Take-Off (PTO)
BLV10452 Front Power Take-Off (PTO) Bracket (3120-3720, 3033R-3046R) 92.40

01 August 2018 U.S.

C-25- 32
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
366 Front Mounted Blade
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Front Quick-Hitch
BLV10637 A-Frame Quick Attach System (3120-3720, 3033R-3046R, model year 2017- 2032R, 209.00
2036R, and 2038R tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.

BLV10634 Auxiliary front hydraulic coupler kit (model year 2017- 2032R, 2036R, and 2038R 92.40
tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.
Includes couplers, hoses, and brackets to route hydraulics from the mid-SCV to the front
three-point hitch.

LVB25878 Front 3-Point Hitch (3120-3720) 1,311.81

BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14

Fits also 2210 Tractors (for 47SB only).

BLV10439 Front Three-Point Hitch (3033R-3046R) 1,353.00

BLV10631 Front Three-Point Hitch (model year 2017- 2032R, 2036R, and 2038R tractors) 1,353.00
For use on MY '17 and newer 2032R and 2038R Tractors.

BLV10638 Hydraulic accumulator kit for Front Three-Point Hitch (model year 2017- 2032R, 2036R, 123.20
and 2038R tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.
For use in applications where there is significant transporting done at higher speeds.
Accumulator system will absorb the bounce associated with front implements when
traveling on the roadway.

Miscellaneous
LVB24810 Front 3-Point Hitch and Mid-Mount Mower Draft Arms 237.54
Required for use with LVB25878 Front Three-Point Hitch with A-Frame (3033R-3046R
and 3120-3720 Tractors Only) and old 7-Iron Mid-Mount Mowers.

LVB25820 Front Three-Point Hitch/Mid Mount Mower Compatibility Brackets 173.80

Required for use with BLV10637, BLV10439 and BLV10452 Front Three-Point Hitch with
A-Frame (3033R-3046R and 3120-3720 Tractors Only) and AutoConenct Mowers.

LP64664 Snow Plow Markers 24.00

For ordering and pricing information on this product, Dealers can refer to the John Deere
Order Zone site via the DealerPath Home Page, then "Parts & Attachments" then
"Ordering Systems" then "Order Zone - (Licensed Products)". Customers must contact
your local JD Dealer.

BLV10176 Spanish Operators Manual and Decal Kit 0.00

01 August 2018 U.S.

C-25- 33
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
D120 Loader
Equipment for Base Machine

1250-mm (49-in) pin-on materials Hood guard

bucket
Basic loader mounting system
Mounting frame for 1023E,
1025R, and non-current 1026R
Series Tractors

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1752P D120 Loader 2,651.00

For 1023E, 1025R, and non-current 1026R Tractors.

DESTINATION
0184 Canada Same Price
English Operator's Manual. If French Operator's Manual is required, will need to order
seperatly.

0202 United States In Base Price

Operator's Manual.

OPERATOR'S MANUAL
0409 English In Base Price

0413 French North America Same Price

0437 Spanish North America Same Price

0400 Less OM Same Price

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch

6000 Ballast Box 248.00

6010 Ballast Box with Extension 366.00

6995 Less Ballast Box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8111 1250 mm (49 in.) Pin-On Materials Bucket In Base Price

01 August 2018 U.S.

C-25- 34
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
D120 Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

IMPLEMENTS Continued...

8995 Less Bucket -595.00

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box
BW15074 Ballast Box Extension 138.60

Buckets
BW14144 49 In. (1250mm) Loader Materials Bucket - Quik Change 756.80

BW15896 49 in. (1250mm) Materials Bucket - Pin ON 700.70

BW14145 53 In. (1350mm) Loader Materials Bucket - Quik Change 820.60

Carrier
BW15939 John Deere CUT Carrier 308.00
Compatible with Quick-Change Buckets.

Hood Guards
BW15901 Deluxe Hood Guard (1023E, 1025R, 1026R, & MY 2017 and newer 2025R) 236.50

BW15900 Hood Guard (1023E, 1025R & 1026R Tractors) 214.50

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW15476 Bucket Level Indicator 64.90

BW16474 French North American Operator's Manual and Decal Kit See Parts

Mounting Frames
BW15898 Mounting Frame 427.90
For 1023E and 1026R Tractors.

01 August 2018 U.S.

C-25- 35
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
120R Loader
Equipment for Base Machine

Non-Self Leveling Boom (includes tractor mid-valve

bucket level indicator and Hood Guard
parking stands) Less Ballast Boxx
Mounting frame and hardware for
MY17 and newer 1R and 2R
tractors
Hoses and pars to connect to

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1470P 120R Loader 3,592.00

For 2025R MY17 and Newer Tractors
For 1E and 1R tractors.
This price does not include the Mandatory and Recommended Optional Ordering codes.
Pricing and Specifications are recommended only and are subject to change without
notice.
Includes 1350 mm (53") materials bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1210 Mounting frame In Base Price
For 1025R, 1023E and 1026R tractors
For 1026R Tractor

1211 Mounting frame Same Price

For 2025R (MY17 and newer)

1995 Less Mounting Frame -363.00

TRACTOR AND LOADER HYDRAULIC CONNECTION

4101 Hoses and Parts In Base Price
For 2025R (MY17 & Newer), 1023E, 1025R, 1026R
Hoses and parts to tractor mid-valve
For 1026R and 2026R Tractors

01 August 2018 U.S.

C-25- 36
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
120R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

TRACTOR AND LOADER HYDRAULIC CONNECTION

Continued...
4995 Less hydraulic connection -431.00

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5101 Hood Guard In Base Price

For 1023E, 1025R, 1026R, and MY17 and newer 2025R
For 1026R and 2026R Tractors

5995 Less hood guard -201.00

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8110 1250 mm (49 in.) quick-change materials bucket -54.00

8115 1350 mm (53 in.) quick-change materials buckets In Base Price

8750 Less bucket -696.00

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box
BW15074 Ballast Box Extension 138.60

Buckets
BW14144 49 In. (1250mm) Loader Materials Bucket - Quik Change 756.80

BW14145 53 In. (1350mm) Loader Materials Bucket - Quik Change 820.60

Carrier
BW15939 John Deere CUT Carrier 308.00
Compatible with Quick-Change Buckets.

Hood Guards
BW15901 Deluxe Hood Guard (1023E, 1025R, 1026R, & MY 2017 and newer 2025R) 236.50

BW15900 Hood Guard (1023E, 1025R & 1026R Tractors) 214.50

Hydraulics
BW17057 Hydraulic hoses and parts for mid-valve connection 508.20

01 August 2018 U.S.

C-25- 37
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
120R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW16474 French North American Operator's Manual and Decal Kit See Parts

Mounting Frames
ALD10025 Mounting Frame 427.90
For 1023E, 1025R and 1026R.

ALD10023 Mounting Frame 427.90

For 2025R (MY17) and former 2026R.

01 August 2018 U.S.

C-25- 38
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
220R Loader
Equipment for Base Machine

Non-Self Leveling boom (includes Less ballast box

bucket level indicator and
parking stands)
Mounting frame for MY17 Deere 2R
Hoses and parts to connect to
tractor mid-valve
Hood guard

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1480P 220R Loader 4,100.00

For MY17 and Newer Deere 2R tractors (2032R and 2038R)
For MY16 and Older Yanmar 2R and former 2X20 Series tractors
For 2036R Tractors
Includes 1450 mm (57") materials bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

PACKAGE CONFIGURATIONS
0921 220R Loader for MY '17 2R Tractors In Base Price
for MY '17 2032R, and 2028R
for 2036R Tractor
For Field Installed Only
Package 0921 includes all necessary parts for loader assembly on MY '17 2R tractors
(Includes boom, mast, cylinders, mounting frames, hydraulics, hood guard and 1450mm
(57") General Materials Bucket)

0922 220R Loader for MY '16 and earlier 2R and 2X20 Series Tractors Same Price
For Field Installed Only
Additional bundles will need to be ordered through parts along with loader boom from
factory. These include mounting frames, hood guard, hydraulics and buckets based off the
specific tractor configuration used.
For MY '16 and earlier 2R and 2X20 Series Tractors)

TRACTOR CONFIGURATION

01 August 2018 U.S.

C-25- 39
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
220R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

TRACTOR CONFIGURATION Continued...

1220 Mounting Frame In Base Price
For MY17 and Future Deere 2R Tractors
For 2032R, 2038R (and EU 2036R)

Note:
Field installed loader for 2016 and earlier 2R and 2X20 Series Tractors, see Additional
Information section and Attachments for individual part numbers that will be needed.
Field installed loaders for 2016 and earlier 2R and 2X20 Series Tractors, order "less
mounting frame" and then the specific part numbers based off model needed. See
Additional Information and Attachments

1995 Less Mounting Frame -363.00

Less mounting frame
- Note:
For MY17 2032R and 2038R Tractors and field installed loaders, need to order mounting
frames and hood guard through parts (see attachments). -Review Additional Information
section
For MY16 2025R and 2032R tractors and 2X20 Series Tractors, order mounting frames
and hood guard from parts (see attachments)
- Review Additional Information section

TRACTOR AND LOADER HYDRAULIC CONNECTION

4200 Two Function Hoses and Parts In Base Price
Hoses and Parts for MY17 & newer Deere 2R
For 2032R, 2038R

4995 Less hydraulic connection -431.00

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price
Order with bucket Codes 8110, 8115, 8116, 8117 and 8120.

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5202 Hood Guard In Base Price

For MY17 and forward 2032R, 2038R (and EU 2036R)

Note:
Field installed loader for 2016 and earlier 2R and 2X20 Series Tractors, see Additional
Information section and Attachments for individual part numbers that will be needed.
- Field installed loaders for 2016 and earlier 2R and 2X20 Series Tractors, order "less
hood guard" and then the specific part numbers based off model needed. See Additional
Information and Attachments

5995 Less hood guard -226.00

For MY17 2032R and 2038R Tractors and field installed loaders, need to order mounting
frames and hood guard through parts (see attachments). -Review Additional Information
section
For MY16 2025R and 2032R tractors and 2X20 Series Tractors, order mounting frames
and hood guard from parts (see attachments)
- Review Additional Information section

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor

01 August 2018 U.S.

C-25- 40
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
220R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

BALLAST Continued...
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8116 1450 mm (57 in.) Quick Change Materials Bucket In Base Price
Base bucket for 220R

8750 Less bucket -727.00

PARTS FOR FIELD INSTALLED LOADERS

Mounting Frames
- (For field installed 220R Loaders, some additional bundles may be needed)
For 2320 / 2025R Tractors (MY16 and earlier) - BW16764
For 2520 Tractors - BW16732
For 2720 / 2032R Tractors (MY16 and earlier) - BW16762
For MY '17 and newer 2032R, 2038R (and EU 2036R) - BLV10704
Hood Guard
- (For field installed 220R Loaders, some additional bundles may be needed)
For 2320 & 2025R Tractors (MY16 and earlier) - BW15217
For 2520, 2720, 2032R Yanmar Tractors MY16 and earlier) - BW15634
For MY '17 2032R, 2038R (and EU 2036R) - BLV10705
Hydraulics
- (For field installed 220R Loaders, some additional bundles may be needed)
For MY '16 and earlier 2R's and 2X20 Series - BW16978 (fittings) and BW15406 (hoses)
For MY '17 and newer 2032R, 2038R (and EU 2036R) - BW16612 (hoses and fittings)
For MY '17 and newer 2032R, 2038R (and EU 2036R) Single Point Hydraulic Connection
- BW16970
Buckets
- BW14144 : 1250mm (49") Materials Bucket
- BW14145 : 1350 mm (53") Materials Bucket
- BW16609 : 1450 mm (57") Materials Bucket
- BW16787 : 1450 mm (57") Heavy Duty Bucket with Loops
- BW14146 : 1500 mm (61") Materials Bucket

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box
BW15074 Ballast Box Extension 138.60

Buckets
BW14144 49 In. (1250mm) Loader Materials Bucket - Quik Change 756.80

BW14145 53 In. (1350mm) Loader Materials Bucket - Quik Change 820.60

BW16787 57 in (1450 mm) Heavy Duty Bucket with Bucket Loops 1,051.60

BW16609 57 in (1450 mm) Materials Bucket 856.90

BW15863 61 In. (1550mm) Loader Materials Bucket 870.10

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

01 August 2018 U.S.

C-25- 41
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
220R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Carrier
BW15939 John Deere CUT Carrier 308.00

Hood Guards
BLV10705 Hood Guard 266.20
For Deere MY17 and newer 2032R, 2038R (and 2036 EEU) Tractors.

BW15634 Hood Guard (MY '16 and Older 2032R, 2520, 2720 Tractors) 266.20
For MY '16 and Older 2032R, 2520, 2720 Tractors.

BW15217 Hood Guard (MY '16 and older 2025R (Yanmar built), 2320, 2210 and 2305 Tractors) 250.80
For MY '16 and older 2025R (Yanmar built), 2320 Tractors.

Hydraulics
BW15406 Hoses and Parts (Couplers) 311.30
For MY16 and older 2320, 2520, 2720, 2025R, 2032R Tractors
BW15406 contains necessary hoses
Used with BW16978

BW16612 Hoses and Parts (Couplers) 508.20

For MY17 and newer Deere 2032R, 2038R (and EEU 2036R).

BW16978 Hoses and Parts (Couplers) 194.70

For MY16 and older 2320, 2520, 2720, 2025R, 2032R Tractors
BW16978 contains fittings for connection (90 degree)
Used with BW15406

BW16970 Single Point Connector 719.40

For MY17 and newer Deere 2032R, 2038R.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

Mounting Frames
BLV10704 Mounting Frame 427.90
For MY17 Deere 2032R, 2038R (and EEU 2036R) Tractors

BW16764 Mounting Frame 427.90

For 2320 and 2025R Tractors.

BW16762 Mounting Frame 427.90

For 2720 and MY16 and earlier 2032R (Yanmar Built Tractors).

BW16732 Mounting Frame 427.90

For 2520 Tractors.

01 August 2018 U.S.

C-25- 42
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
300E Loader
Equipment for Base Machine

Non-parking loader Tractor to valve oil line kit

Quik-change attachment carrier Less ballast box
Mounting frame
Hood guard (with side braces)
Single lever control valve
(two-function)

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1360P 300E Loader 4,527.00

For 3E Tractors
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
Includes 1550-mm (61-in.) Materials bucket in base equipment

DESTINATION
0202 United States In Base Price

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1330 Mounting Frame In Base Price
For 3E Tractor Series

TRACTOR AND LOADER HYDRAULIC CONNECTION

4301 Two-function single lever control - for 300E In Base Price
For MY18 and newer 3E Tractors
Hydraulic loader control kit (2ftn) for 3E tractors

4303 Two-function single lever control - for 300E Same Price

For MY17 and earlier 3E tractors
Hydraulic loader control kit (2ftn) for 3E tractors

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

01 August 2018 U.S.

C-25- 43
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
300E Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

HOOD GUARDS
5330 Hood Guard In Base Price
For MY18 3E and newer
Hood guard, braces and hardware

5331 Hood Guard Same Price

For MY17 and earlier 3E tractors
Hood guard, braces and hardware

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8122 1550 mm (61 in.) materials bucket In Base Price

8750 Less bucket -738.00

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box
BW15074 Ballast Box Extension 138.60

Buckets
BW16787 57 in (1450 mm) Heavy Duty Bucket with Bucket Loops 1,051.60

BW15863 61 In. (1550mm) Loader Materials Bucket 870.10

Carrier
BW15939 John Deere CUT Carrier 308.00
Compatible with Quick-Change Buckets.

Hood Guards
LVB25998 Hood Guard 266.20
Hood Guard is Standard with D160 Loaders.

AW33948 Hood Guard for 3E 397.60

MY17 and earlier - for 300E Loader.
Requires W60474 (right brace) and W30475 (left brace) - 300E Loader.

AXX10478 Hood Guard for 3E 266.20

MY18 and forward - for 300E Loader.
Requires W60474 (right brace) and W30475 (left brace) - 300E Loader.

Hydraulics
BXX10074 Single Lever Control Kit 1,248.50

01 August 2018 U.S.

C-25- 44
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
300E Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW15872 Parking Stand Kit 424.60

01 August 2018 U.S.

C-25- 45
 JOHN DEERE TURF & UTILITY PRODUCTS
300R Loader
Equipment for Base Machine

Quick-Park Loader Mounting Hood Guard

System Bucket Level Indicator
Quick Change CUT Carrier
Non Self-Leveling boom
Mounting Frames - Open Operator
Station

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1370P 300R Loader 4,682.00

For 3033R, 3039R, 3046R, (3038R, 3045R) Tractors.
Also for older 3120-3720, 3203, 4200, 4400, 4210, and 4410 Tractors.
Includes 61" (1550 mm) Material Bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1305 Mounting frame and hoses In Base Price
For 3033R, 3039R, 3046R, (3038R, 3045R), 3120, 3320, 3520, and 3720 Open operator
station tractors.
Also for older 3203, 4200, 4300, 4210, 4310 and 4410 Open Station Tractors

1310 Mounting frame and hoses Same Price

For 3033R, 3039R, 3046R, (3038R, 3045R), 3320, 3520, and 3720 Cab tractors.

1995 Less Mounting Frame -695.00

TRACTOR AND LOADER HYDRAULIC CONNECTION

4310 Hoses and parts for tractor mid-valve connection In Base Price
For 3033R, 3039R, 3046R, (3038R, 3045R) Open Station and Cab Tractors
Also Older 3120, 3320, 3520, 3720, 3203, 4200, 4300, 4210, 4310 and 4410 Open Station
Tractors
300R Loader

4995 Less hydraulic connection -264.00

01 August 2018 U.S.

C-25- 46
 JOHN DEERE TURF & UTILITY PRODUCTS
300R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

TRACTOR AND LOADER HYDRAULIC CONNECTION

Continued...

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5995 Less hood guard -226.00

5240 Hood guard In Base Price

For 3033R, 3039R, and 3046R (3038R, 3045R) Tractors.

5245 Deluxe hood guard 276.00

For 3033R, 3039R, and 3046R (3038R, 3045R) Tractors.

5255 Hood guard Same Price

For 3120, 3320, 3520, and 3720 Tractors.

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8120 1550 mm (61 in.) materials bucket In Base Price

8125 61 In. (1550 mm) Heavy Duty Bucket with Holes for Cutting Edge 163.00

8130 73 In. (1850mm) Materials Bucket 135.00

8750 Less bucket -738.00

HYDRAULIC CONNECTION - LOADER TO IMPLEMENT

9611 Third function hydraulic kit (hoses and parts) 382.00

ATTACHMENTS FOR FIELD CONVERSION

Buckets
BW16787 57 in (1450 mm) Heavy Duty Bucket with Bucket Loops 1,051.60

BW14764 61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,062.60

BW15863 61 In. (1550mm) Loader Materials Bucket 870.10

01 August 2018 U.S.

C-25- 47
 JOHN DEERE TURF & UTILITY PRODUCTS
300R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

BW14765 73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,235.30

BW14147 73 In. (1850mm) Loader Materials Bucket 1,029.60

Carrier
BW16184 John Deere CUT Carrier 308.00

Cutting Edges
BW14762 61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware 162.80

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware 200.20

Hood Guards
BW16585 Deluxe Hood Guard Attachment 325.60
To be used with BW16617.

BW14378 Hood Guard 266.20

For 4200-4400, 4210-4400 Tractors.

BW15219 Hood Guard 266.20

For 3000 TWENTY tractors.

BW16617 Hood Guard 266.20

For 300R and 320R on 3R Tractors.

BW15534 Hood Guard (3203) 266.20

Hydraulics
BW15599 Hoses and Parts 311.30
For 3R, 3020, 3203, 4X00, and 4X10 OOS and Cab series tractors.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW15223 Bucket Level Indicator 67.10

Mounting Frames
BW15456 Mounting Frame (3320-3720, 4320-4720 Cab Tractors) 508.20

BW15204 Mounting Frame (4200-4400, 4210-4400, 3120-3720, 3203 508.20

Open Station Tractors)

Tooth Bars
BW15227 61 In. (1550 mm) Tooth Bar for Bucket 490.60
Recommended for use with heavy-duty buckets only.

01 August 2018 U.S.

C-25- 48
 JOHN DEERE TURF & UTILITY PRODUCTS
320R Loader
Equipment for Base Machine

Quick-Park Loader Mounting Bucket Level Indicator

System
Quick Change CUT Carrier
Non Self-Leveling boom
Mounting Frames - Open Operator
Station
Hood Guard

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1350P 320R Loader 5,382.00

For 3033R, 3039R, 3046R, Tractors
Also for older 3120 - 3720, 4105, 3203, 4005, 990, 970, 1070, 4300-4400, and 4310-4410
Tractors)
Includes 61" (1550 mm) Material Bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1305 Mounting frame and hoses In Base Price
For 3033R, 3039R, 3046R, (3038R, 3045R), 3120, 3320, 3520, and 3720 Open operator
station tractors.
Also for older 3203, 4200, 4300, 4210, 4310 and 4410 Open Station Tractors

1310 Mounting frame and hoses Same Price

For 3033R, 3039R, 3046R, (3038R, 3045R), 3320, 3520, and 3720 Cab tractors.

1325 Mounting frame and hoses Same Price

For 4105.

1995 Less Mounting Frame -695.00

TRACTOR AND LOADER HYDRAULIC CONNECTION

4312 Hoses and parts for mid-valve connection In Base Price
For 3033R, 3039R, 3046R, (3038R, 3045R) Open Station and Cab Tractors

01 August 2018 U.S.

C-25- 49
 JOHN DEERE TURF & UTILITY PRODUCTS
320R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

TRACTOR AND LOADER HYDRAULIC CONNECTION

Continued...
Also Older 3120, 3320, 3520, 3720, 3203, 4200, 4300, 4210, 4310 and 4410 Open Station
Tractors
320R Loader

4313 Hoses and parts for mid-valve connection Same Price

For 4105 and 3203 Tractors

4995 Less hydraulic connection -264.00

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5995 Less hood guard -226.00

5240 Hood guard In Base Price

For 3033R, 3039R, and 3046R (3038R, 3045R) Tractors.

5245 Deluxe hood guard 276.00

For 3033R, 3039R, and 3046R (3038R, 3045R) Tractors.

5255 Hood guard Same Price

For 3120, 3320, 3520, and 3720 Tractors.

5270 Hood guard Same Price

For 4105 Tractors
Note: Required for loader installation.

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8120 1550 mm (61 in.) materials bucket In Base Price

8125 61 In. (1550 mm) Heavy Duty Bucket with Holes for Cutting Edge 163.00

8130 73 In. (1850mm) Materials Bucket 135.00

8136 73 In. 1850 mm) Heavy Duty Bucket with Bucket Loops and Holes for Cutting Edge 382.00

8750 Less bucket -738.00

01 August 2018 U.S.

C-25- 50
 JOHN DEERE TURF & UTILITY PRODUCTS
320R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

HYDRAULIC CONNECTION - LOADER TO IMPLEMENT

9611 Third function hydraulic kit (hoses and parts) 382.00

ATTACHMENTS FOR FIELD CONVERSION

Buckets
BW16787 57 in (1450 mm) Heavy Duty Bucket with Bucket Loops 1,051.60

BW14764 61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,062.60

BW15863 61 In. (1550mm) Loader Materials Bucket 870.10

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

BW14765 73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,235.30

BW14658 73 In. (1850 mm) Loader High Volume Bucket 1,441.00

BW14147 73 In. (1850mm) Loader Materials Bucket 1,029.60

BW15273 85 In. (2150 mm) Loader High Volume Bucket 1,763.30

Carrier
BW16184 John Deere CUT Carrier 308.00

Cutting Edges
BW14762 61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware 162.80

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware 200.20

Hood Guards
BW16585 Deluxe Hood Guard Attachment 325.60
To be used with BW16617.

BW14378 Hood Guard 266.20

For 4300-4400, 4310-4410 Tractors.

BW15219 Hood Guard 266.20

For 3000 TWENTY tractors.

BW15416 Hood Guard 266.20

For 970, 990 and 1070 Tractors. Required For Loader
Installation on 970, 990, 1070 Tractors, Includes
Front Weight Bracket.
Compatible with 320R, H165 and 300CX loaders.
For 970, 990 and 1070 Tractors. Required For Loader
Installation on 970, 990, 1070 Tractors, Includes
Front Weight Bracket.

BW16617 Hood Guard 266.20

For 300R and 320R on 3R Tractors.

BW15848 Hood Guard (3005, 4005) 266.20

BW15534 Hood Guard (3203) 266.20

BW16040 Hood Guard (4105) 266.20

Hydraulics

01 August 2018 U.S.

C-25- 51
 JOHN DEERE TURF & UTILITY PRODUCTS
320R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW15352 Hoses and Parts 311.30
For 4005, 990, 970, 1070 Tractors.

BW15599 Hoses and Parts 311.30

For 3203 and 4105.

BW15762 Hoses and Parts 311.30

For 3120, 3320, 3520, 3720, 4300, 4400, 4310 and 4410 Open Station Tractors.
For 3320, 3520 and 3720 Cab Tractors.

BW16138 Hydraulic Lines and Hoses (3 Function) 432.30

If Used with Skid Steer Attachments, Couplers will not Match.
The Following Parts are Required to Convert for this Application:
(1) KV14216, (1) KV15976 and (2) AT191333.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW15223 Bucket Level Indicator 67.10

BW15244 Skid Steer Attachment Carrier 667.70

See Sales Manual for Compatible Attachments.

Mounting Frames
BW15347 Mounting Frame 508.20
For 4005, 970, 990, and 1070 Tractors.

BW15456 Mounting Frame (3320-3720, 4320-4720 Cab Tractors) 508.20

BW15682 Mounting Frame (4105) 508.20

BW15204 Mounting Frame (4200-4400, 4210-4400, 3120-3720, 3203 508.20

Open Station Tractors)

Tooth Bars
BW15227 61 In. (1550 mm) Tooth Bar for Bucket 490.60
Recommended for use with heavy-duty buckets only.

BW15228 73 In. (1850 mm) Tooth Bar for Bucket 595.10

Recommended for use with heavy-duty buckets only.

01 August 2018 U.S.

C-25- 52
 JOHN DEERE TURF & UTILITY PRODUCTS
400E Loader
Equipment for Base Machine

Loader Mast / Mounting Frame Less Ballast Box

Quick Change CUT Carrier
Single Lever Hydraulic Control
Non-Self Leveling boom
Hood Guard with side braces and
hardware

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1380P 400E Loader 5,520.00

For 4044M, 4052M, 4066M, (4049M) and 4R Open Operator Station (OOS) Tractors.
Includes 73" Material Bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1400 Mounting frame In Base Price
For 4M Series Tractors and 4R Open Operator Station Tractors.

TRACTOR AND LOADER HYDRAULIC CONNECTION

4405 Two-function single lever control - for 400E and 4M tractor compatibility In Base Price
Loader joystick and valve assembly are mounted to the loader frame.

4406 Two-function single lever control - for 400E and 4R tractor compatibility (open operator -676.00
station (OOS) only)
Loader joystick is integrated into the tractor and loader hoses connect to tractor
mid-valve assembly.

4995 Less hydraulic connection -1,415.00

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

01 August 2018 U.S.

C-25- 53
 JOHN DEERE TURF & UTILITY PRODUCTS
400E Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5340 Hood Guard In Base Price

For 4M tractors (400E loader)

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8140 73 In. (1850 mm) High Volume Bucket 349.00

8000 73 In. (1850 mm ) Materials Bucket In Base Price

8136 73 In. 1850 mm) Heavy Duty Bucket with Bucket Loops and Holes for Cutting Edge 246.00

8750 Less bucket -874.00

ATTACHMENTS FOR FIELD CONVERSION

Buckets
BW14764 61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,062.60

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

BW16358 73 IN (1850mm) Heavy Duty Bucket with Bucket Loops 1,320.00

BW14765 73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,235.30

BW14658 73 In. (1850 mm) Loader High Volume Bucket 1,441.00

BW16183 73 In. (1850 mm) Materials Bucket 1,029.60

BW15273 85 In. (2150 mm) Loader High Volume Bucket 1,763.30

Carrier
BW16184 John Deere CUT Carrier 308.00

Cutting Edges
BW14762 61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware 162.80

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware 200.20

Hood Guards
BW16989 Deluxe Brush Guard Attachment 165.00
For 400E (OOS) on 4044R, 4052R and 4066R Tractors.

01 August 2018 U.S.

C-25- 54
 JOHN DEERE TURF & UTILITY PRODUCTS
400E Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Hood Guards
BW16335 Hood Guard 288.20
For D170 (OOS Only) on 4044R, 4052R, and 4066R Tractors.

Hydraulics
BW16448 3rd Function hydraulic lines and hoses 420.20
For 400E and D170 on 4M Tractors.
Contains hoses and lines. Joystick must be ordered from tractor factory.

BW16491 3rd Function hydraulic lines and hoses 420.20

For 400E and D170 on 4R OOS tractors.
Contains hoses and lines. Joystick must be ordered from tractor factory.

BLV10878 Two Function Single Lever Control - for 400E and 4M tractor compatibility 1,248.50
Hydraulic hoses, Single Lever Control, and ICV for 400E and D170 on 4M.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW16127 Parking Stand Kit 631.40

For 400E and D170 loader on 4M tractors.

Tooth Bars
BW15227 61 In. (1550 mm) Tooth Bar for Bucket 490.60
Recommended for use with heavy-duty buckets only.

BW15228 73 In. (1850 mm) Tooth Bar for Bucket 595.10

Recommended for use with heavy-duty buckets only.

01 August 2018 U.S.

C-25- 55
 JOHN DEERE TURF & UTILITY PRODUCTS
440R Loader
Equipment for Base Machine

Quick-Park Loader System Hood Guard for 4R

CUT Carrier Less Ballast Box
Non Self-leveling boom Bucket Level Indicator
Mounting Frame -
Hydraulic hoses to mid-valve and
fittings

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
EX-WORKS Laredo, Texas: Martinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,
Ontario.

1390P 440R Loader 6,218.00

For 4R Series Open Station and Cab Tractors
Includes 1850 mm (73") Material bucket in base equipment

DESTINATION
0202 United States In Base Price
Operator's Manual.

0184 Canada Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

TRACTOR CONFIGURATION
1401 Mounting frame Same Price
For 4R Series Open Station and Non-Current 4120, 4320, 4520, 4720, 4500, 4600, 4700,
4510, 4610, and 4710 Open Station Tractors

1402 Mounting frame In Base Price

For 4R Series Cab and Non-Current 4320, 4520, and 4720 Cab Tractors

1995 Less Mounting Frame -574.00

LEVELING
2401 440R Standard loader non-self-leveling (NSL) In Base Price

2402 440R Mechanical self-leveling loader (MSL) 687.00

TRACTOR AND LOADER HYDRAULIC CONNECTION

4400 Single-point hydraulic connecter (open operator station (OOS) only) 179.00
Single-point hydraulic connection, tractor and loader half. Tractor half mounts to
operator platform with bracket.

01 August 2018 U.S.

C-25- 56
 JOHN DEERE TURF & UTILITY PRODUCTS
440R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

TRACTOR AND LOADER HYDRAULIC CONNECTION

Continued...

4401 Hoses to tractor mid-valve In Base Price

Hoses from loader to quick-couplers at mid-valve.

4995 Less hydraulic connection -431.00

CARRIERS
7020 John Deere Compact Utility Tractor (CUT) carrier In Base Price

7095 Less carrier -261.00

7410 Skid Steer carrier 305.00

Attachments for skid steer carrier can be ordered from attachments and Worksite PRO
attachments.

HOOD GUARDS
Hood guard must be installed on tractor to mount loader.

5995 Less hood guard -245.00

5360 Hood guard 51.00

For 4120, 4320, 4520, and 4720 Tractors.

5370 Hood guard In Base Price

For 4044R, 4052R, and 4066R (4049R) Tractors.

5371 Deluxe hood guard 140.00

For 4044R, 4052R, and 4066R (4049R) Tractors.

BALLAST
3-point hitch ballast is required for loader stability and reducing stress of vital tractor
components. See operator's manual for ballast recommendations. For ballast box use with
iMatch Quick-Hitch, BW15056 is required.

6000 Ballast box 248.00

6995 Less ballast box In Base Price

IMPLEMENTS
Additional bucket options are available as attachments.

8130 73 In. (1850mm) Materials Bucket In Base Price

Not compatible with Code 7410.

8140 73 In. (1850 mm) High Volume Bucket 349.00

Not compatible with Code 7410.

8136 73 In. 1850 mm) Heavy Duty Bucket with Bucket Loops and Holes for Cutting Edge 246.00

8750 Less bucket -874.00

01 August 2018 U.S.

C-25- 57
 JOHN DEERE TURF & UTILITY PRODUCTS
440R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

HYDRAULIC CONNECTION - LOADER TO IMPLEMENT

9611 Third function hydraulic kit (hoses and parts) 382.00

LOADER SUSPENSION SYSTEM

9540 Loader suspension kit (440R Only) 437.00
Manual on and off lever.

ATTACHMENTS FOR FIELD CONVERSION

Buckets
BW14764 61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,062.60

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

BW16358 73 IN (1850mm) Heavy Duty Bucket with Bucket Loops 1,320.00

BW14765 73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,235.30

BW14658 73 In. (1850 mm) Loader High Volume Bucket 1,441.00

BW14147 73 In. (1850mm) Loader Materials Bucket 1,029.60

LVB25345 84 In. Light Material Bucket 1,477.30

Requires Skid Steer Attachment Carrier.

BW15273 85 In. (2150 mm) Loader High Volume Bucket 1,763.30

Carrier
BW16184 John Deere CUT Carrier 308.00

Cutting Edges
BW14762 61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware 162.80

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware 200.20

Hood Guards
BW16989 Deluxe Brush Guard Attachment 165.00
For 440R and H180 on 4044R, 4052R, and 4066R Tractors. Hood guard required for
loader installation.

BW15222 Deluxe Hood Guard Attachment 335.50

For 4000 TWENTY tractors.

BW15221 Hood Guard (4120-4720) 266.20

For 440R and H180 loader on 4020 series tractors. To install loader on tractor, must
order and install BW16393 hanging weldment kit on hood guard.

Hood Guards
BW16335 Hood Guard 288.20
For 440R & H180 on 4044R, 4052R, and 4066R Tractors. Hood guard required for
loader installation.

Hydraulics
BW16414 3rd Function hydraulic and hoses 413.60
For 440R and H180 loaders.

01 August 2018 U.S.

C-25- 58
 JOHN DEERE TURF & UTILITY PRODUCTS
440R Loader
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BLV10879 Dual Mid Valve Kit 687.50
For 4M and 440R (and H180) Loader compatibility.
Includes valve, hoses, joystick and other associated parts.
Refer to H180 Sales Manual for more information.

BW16221 Hoses to tractor mid-valve 508.20

For 440R and H180 on 4R tractors.
Hoses from loader to quickcouplers at midvalve.
To allow 4M tractors to utilize H180 loader, dual mid valve kit BLV10879 is needed.
Refer to 440R and H180 Sales Manual for more information.

BW16220 Single Point Hydraulic Connector 719.40

For 440R and H180 on 4R OOS tractors only.
Single point hydraulic connection, tractor and loader half. Tractor half mounts to
operator platform with bracket.
To allow 4M tractors to utilize H180 loader, dual mid valve kit BLV10879 is needed.
Refer to H180 Sales Manual for more information.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.

Miscellaneous
BW15073 Ballast Box 292.60

BW16364 Bucket Level Indicator 73.70

BW16393 Hanging Weldment Kit 82.50

Required when installing 440R and H180 on former 4X20 and 4X10 Series Tractors.

BW16470 Loader Suspension System 480.70

For 440R and H180 loaders on 4R tractors.

BW15244 Skid Steer Attachment Carrier 667.70

See Sales Manual for Compatible Attachments.

Mounting Frames
BW16171 Mounting Frame 676.50
For 440R and H180 on 4R OOS and Non-Current 4120, 4320, 4520, 4720, 4500, 4600,
4700, 4510, 4610, and 4710 OOS Tractors.

BW16268 Mounting Frame 676.50

For 440R and H180 on 4R Cab and Non-Current 4320, 4520, and 4720 Cab Tractors.

Tooth Bars
BW15227 61 In. (1550 mm) Tooth Bar for Bucket 490.60
Recommended for use with heavy-duty buckets only.

BW15228 73 In. (1850 mm) Tooth Bar for Bucket 595.10

Recommended for use with heavy-duty buckets only.

01 August 2018 U.S.

C-25- 59
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D In. Mid-Mount Side Discharge Mower (1 Family Tractors)
Equipment for Base Machine

54 In. (137.16 cm) Cutting Width Quick Release Belt Shields

Three Cutting Blades Hinged Discharge Chute
10 Gauge Stamped Steel Deck Greasable Spindles
(4) Front and Rear Adjustable Deck Lockup
and Quick Release Gauge Mower Wash Port
Wheels with Memory Settings
PTO Shaft (See Code Selection)

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

5315M 54D In. Mid-Mount Side Discharge Mower (1 Family Tractors) 1,833.00
For 1023E, 1025R, and 1026R Tractors.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

024A Christmas Island Same Price

024B Heard Island and McDonald Islands Same Price

0079 Japan Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

01 August 2018 U.S.

C-25- 60
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D In. Mid-Mount Side Discharge Mower (1 Family Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS
1995 Less Attaching Parts -237.00
Mower lift system not included. Only compatible with a tractor that already has a mower
lift installed.

1000 Attaching Parts (Mechanical Mower Lift) 206.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.

1001 Attaching Parts (Hydraulic Mower Lift) 390.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.

1002 Attaching Parts (Independent Hydraulic Mower Lift) 610.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.
If tractor is equipped with power beyond, also order LVA18446 (Hydraulic oil line).

*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

1100 Attaching Parts (Mechanical Mower Lift) In Base Price

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).

1101 Attaching Parts (Hydraulic Mower Lift) 293.00

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).

1102 Attaching Parts (Independent Hydraulic Mower Lift) 512.00

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).
If tractor is already equipped with power beyond, also order LVA18446 (Hydraulic oil
line) for Model Year 2017 and older tractors OR LVA23191 for Model Year 2018 and
newer tractors.

*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

DRIVE SHAFT
2000 Manual PTO Connection In Base Price

2001 Auto PTO Coupler 253.00

2995 Less Drive Shaft -187.00

ATTACHMENTS FOR FIELD CONVERSION

01 August 2018 U.S.

C-25- 61
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D In. Mid-Mount Side Discharge Mower (1 Family Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BLV10688 Ind. Valve and Switch Kit 327.80
Electro-hydraulic valve, switch, and plumbing for all 1023E, 1025R, 1026R, and TLB
Tractors
Required for Independent hydraulic lift.
See Sales Manual.
If tractor is already equipped with power beyond, also order LVA18446 (Hydraulic oil
line) for Model Year 2017 and older tractors OR LVA23191 for Model Year 2018 and
newer tractors.
*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

BLV10739 Mower Deck Hydraulic Lift Power Kit 276.10

Required for all 1023E, 1025R, 1026R, and TLB Tractors.
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

BLV10736 Mower Deck Lift Components 279.40

Required for all 1023E, 1025R, 1026R, and TLB Tractors.
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

BLV10738 Mower Deck Mechanical Linkage Kit 128.70

Rockshaft Linkage Components for Model Year 2016 and older 1023E, 1025R, 1026R,
and TLB models.
Also used on 1025R models built prior to the following S/N Break (XXXXXX - 324500) -
Required for Mechanical lift only.
See Sales Manual.

BLV10737 Mower Deck Shaft Kit 114.40

Cross Shaft Components for all Model Year 2016 and older 1023E, 1025R, 1026R, and
TLB models.
Also used on 1025R models built prior to the following S/N Break (XXXXXX - 324500)
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

LVB26206 SCV Hose Kit 69.30

Hydraulic hose and fittings for connecting mower deck lift system to Loader SCV. For use
on all 1023E, 1025R, and 1026R Tractors. - Required for Hydraulic lift.
See Sales Manual.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM20827 Mulch kit (54C/54D/54X) 217.21

PTO Connection
BLV10616 Auto PTO Coupler 518.10

LVB26044 Manual PTO Connection 220.00

01 August 2018 U.S.

C-25- 62
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R
Tractors)
Equipment for Base Machine

54 In. Cutting Width Auto-Connect PTO Shaft

Three Cutting Blades Anti-Scalp Front Skid
7 Gauge Stamped Steel Deck Hinged Discharge Chute
Drive-Over Capability with Greasable Spindles
Tractor Alignment Guide Front Lip Reinforcement
Front and Rear Quick Release Mower Wash Port
Gauge Wheels with Memory
Settings

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

700ALV 54D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R 1,505.00
Tractors)
For MY17 and newer 2025R Tractors.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

0448 English No Text Same Price

Export English Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1100 Attaching Parts (Mechanical Mower Lift) 699.00

For MY17 and newer 2025R Tractors.

Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

1102 Attaching Parts (Independent Hydraulic Mower Lift) 1,267.00

Premium Independent Hydraulic Mower Lift for MY2017 and newer 2025R Tractors.

01 August 2018 U.S.

C-25- 63
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R
Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

Includes hydraulic cylinder, dedicated electro-hydraulic valve (with full control in both
the up and down directions), rocker switch, wire harnesses, hydraulic plumbing,
AutoConnect PTO shaft, and all AutoConnect mower deck linkages.

ATTACHMENTS FOR FIELD CONVERSION

Miscellaneous
BLV10956 Mechanical Mower Lift Kit 832.70
For MY17 and newer 2025R Tractors.

Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages."

BLV10933 Premium Independent Hydraulic Mower Lift Kit 668.80

For MY2017 and newer 2025R tractors with 54D and 60D 7-Iron AutoConnect mower
decks.

Includes hydraulic cylinder, dedicated electro-hydraulic valve (with full control in both
the up and down directions), rocker switch, wire harnesses and hydraulic plumbing to
convert the mechanical lift system into a premium independent hydraulic lift system. If
there are no mower lift components installed on the tractor, you must also order and
install the Mechanical Mower Lift Kit (BLV10956) in addition to this kit.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM23977 54 HC Mulch kit 232.19
For use on AutoConnect 54D 7-Iron Deck when installed on MY2017 and newer 2025R
Tractors.

01 August 2018 U.S.

C-25- 64
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320
Tractors)
Equipment for Base Machine

54 In. (137.16 cm) Cutting Width Hinged Discharge Chute

Three Cutting Blades Greasable Spindles
10 Gauge Stamped Steel Deck Front Lip Reinforcement
Front and Rear Quick Attaching Parts (See Code
Release Gauge Wheels with Selection)
Memory Setting Deck Lockup
PTO Shaft (See Code Selection) Mower Wash Port
Quick Release Belt Shields
Anti-Scalp Front Roller

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0175LV 54D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320 1,956.00
Tractors)
For MY16 and older 2025R and 2320 Tractors.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1000 Attaching Parts (Mechanical Mower Lift) 371.00

01 August 2018 U.S.

C-25- 65
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
54D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320
Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

For Independent Mower Lift, LVB25630
must also be ordered.

ATTACHMENTS FOR FIELD CONVERSION

Attaching Parts
LVB25630 Independent Lift Kit for 2305, 2025R, 2320 Tractors 408.74
Requires LVB25620 (Code 1000) Attaching Parts.

Hydraulics
LVB25822 Loader and Mower Mechanical Diverter Valve Kit (2305, 2025R, 2320) 421.59

Miscellaneous
LVB25620 Attaching Parts for MY '16 and Older 2025R, 2320 Tractor (Mechanical Mower Lift) 425.86

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (MY '16 and Older 2025R, MY
'16 and Older 2032R, 2320, 2520, 2720, 4115).

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM20827 Mulch kit (54C/54D/54X) 217.21

01 August 2018 U.S.

C-25- 66
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR RIDERS & TRACTORS
54-in. Shaft Drive Convertible/Edge Xtra Mower Deck (54C/54X)
Equipment for Base Machine

54-in. (137-cm) cutting width Four mower wheels and front

Side discharge Edge Xtra center roller
10-gauge, 0.135-in. (3.4-mm) Mower wheels rotate 90 degrees
stamped-steel deck shell for easy mower removal
Shaft drive
Three greaseable blade spindles
Mower wash port

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Horicon, Wisconsin

9071M 54-in. Shaft Drive Convertible/Edge Xtra Mower Deck (54C/54X) 1,300.00
For X400/X500 HDGTs (Heavy-Duty Garden Tractors), Model Year 2006-2012 X700
Series, 2210 and 2305 Compact Utility Tractors.

DESTINATION
0202 United States and Canada In Base Price

0195 Mexico Same Price

ATTACHING PARTS
1000 Attaching Parts for 2305, 2210 (Mechanical Mower Lift) 265.00

1001 Attaching Parts for 2305 (Independent Mower Lift) 487.00

Independent Lift is not Available on 2210.

1010 Less Attaching Parts In Base Price

ATTACHMENTS FOR FIELD CONVERSION

Attaching Parts
LVB25631 Attaching Parts for 2305 (Independent Mower Lift) 192.60
Requires LVB25630 independent lift kit. Not available for 2210 tractors.

LVB25419 Attaching Parts for 2305, 2210 (Mechanical Mower Lift) 303.89

LVB25630 Independent Lift Kit for 2305, 2025R, 2320 Tractors 408.74
Requires LVB25620 (option code 1001) attaching parts. Requires LVB25631 (independent
lift attaching parts). Not available for 2210 tractors.

Hydraulics
LVB25822 Loader and Mower Mechanical Diverter Valve Kit (2305, 2025R, 2320) 421.59
Diverter is not compatible with mechanical mower lift system.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

01 August 2018 U.S.

C-25/L-35- 67
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR RIDERS & TRACTORS
54-in. Shaft Drive Convertible/Edge Xtra Mower Deck (54C/54X)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM23648 Roller striping kit (X400/X500 HDGT, X700s) 286.76
Compatible with model year 2004- (SN 040, 001-) 54C, 54X, 62X, and 60-in. (152-cm)
7-Iron Mowers used on X400/X500 HDGT and X700 Ultimate Tractors. See Sales Manual
for additional parts requirements on model year 2004-2007 (SN 040,001-100,000) 54C,
54X, 62C and 62X Decks.

Mulch Kits
BM20827 Mulch kit (54C/54D/54X) 217.21

Spanish North American Kit

LVB26020 North American Spanish Labels 0.00

01 August 2018 U.S.

C-25/L-35- 68
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D 7-Iron Mid Mount Side Discharge Mower (1 Family Tractors)
Equipment for Base Machine

60 In. (152.4 cm) Cutting Width Hinged Discharge Chute

Three Cutting Blades Greasable Spindles
7 Gauge Stamped Steel Deck Front Lip Reinforcement
(4) Front and Rear Adjustable Deck Lockup
and Quick Release Gauge Mower Wash Port
Wheels with Memory Settings
PTO Shaft ( See Code Seletion)
Quick Release Belt Shields

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

5325M 60D 7-Iron Mid Mount Side Discharge Mower (1 Family Tractors) 2,259.00
For 1023E, 1025R, and 1026R Tractors.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

024A Christmas Island Same Price

024B Heard Island and McDonald Islands Same Price

0079 Japan Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

01 August 2018 U.S.

C-25- 69
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D 7-Iron Mid Mount Side Discharge Mower (1 Family Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS
1995 Less Attaching Parts -237.00
Mower lift system not included. Only compatible with a tractor that already has a mower
lift installed.

1000 Attaching Parts (Mechanical Mower Lift) 206.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.

1001 Attaching Parts (Hydraulic Mower Lift) 390.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.

1002 Attaching Parts (Independent Hydraulic Mower Lift) 610.00

For Model Year 2015 and older 1025R Tractors serial number break (XXXXXX - 324500).
Also used on Model Year 2016 and older 1023E, 1026R, and TLB models.
If tractor is equipped with power beyond, also order LVA18446 (Hydraulic oil line).

*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

1100 Attaching Parts (Mechanical Mower Lift) In Base Price

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).

1101 Attaching Parts (Hydraulic Mower Lift) 293.00

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).

1102 Attaching Parts (Independent Hydraulic Mower Lift) 512.00

For Model Year 2016 and newer 1023E and 1025R TLB models.
Also used on Model Year 2015 1025R Tractors serial number break (324501 - XXXXXX)
and Model Year 2016 and newer 1025R Tractors serial number break (00101 - XXXXX).
If tractor is already equipped with power beyond, also order LVA18446 (Hydraulic oil
line) for Model Year 2017 and older tractors OR LVA23191 for Model Year 2018 and
newer tractors.

*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

DRIVE SHAFT
2000 Manual PTO Connection In Base Price

2001 Auto PTO Coupler 253.00

2995 Less Drive Shaft -187.00

ATTACHMENTS FOR FIELD CONVERSION

01 August 2018 U.S.

C-25- 70
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D 7-Iron Mid Mount Side Discharge Mower (1 Family Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BLV10688 Ind. Valve and Switch Kit 327.80
Electro-hydraulic valve, switch, and plumbing for all 1023E, 1025R, 1026R, and TLB
Tractors
Required for Independent hydraulic lift.
See Sales Manual.
If tractor is already equipped with power beyond, also order LVA18446 (Hydraulic oil
line) for Model Year 2017 and older tractors OR LVA23191 for Model Year 2018 and
newer tractors.
*Required lines included in Power Beyond kit, if installing at the same time there is no
need to order additional lines.

BLV10739 Mower Deck Hydraulic Lift Power Kit 276.10

Required for all 1023E, 1025R, 1026R, and TLB Tractors.
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

BLV10736 Mower Deck Lift Components 279.40

Required for all 1023E, 1025R, 1026R, and TLB Tractors.
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

BLV10738 Mower Deck Mechanical Linkage Kit 128.70

Rockshaft Linkage Components for Model Year 2016 and older 1023E, 1025R, 1026R,
and TLB models.
Also used on 1025R models built prior to the following S/N Break (XXXXXX - 324500) -
Required for Mechanical lift only.
See Sales Manual.

BLV10737 Mower Deck Shaft Kit 114.40

Cross Shaft Components for all Model Year 2016 and older 1023E, 1025R, 1026R, and
TLB models.
Also used on 1025R models built prior to the following S/N Break (XXXXXX - 324500)
Required for Mechanical lift, Hydraulic lift and Independent hydraulic lift.
See Sales Manual.

LVB26206 SCV Hose Kit 69.30

Hydraulic hose and fittings for connecting mower deck lift system to Loader SCV. For use
on all 1023E, 1025R, and 1026R Tractors. - Required for Hydraulic lift.
See Sales Manual.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM23978 60 HC Mulch kit 242.89
For use on 60D mower decks installed on 1 Family tractors. If mower deck serial number
is prior to (XXXXXX - 30000) then use Mulch Kit TCB10953 instead.

TCB10953 Mulch Kit (1524-mm (60-in.) 7-Iron, 7-Iron II and 7-Iron PRO) 326.36
For use on 60D mower decks installed on 1 Family tractors. If mower deck serial number
is after (30001 - XXXXXX) then use Mulch Kit BM23978 instead.

PTO Connection
BLV10616 Auto PTO Coupler 518.10

LVB26044 Manual PTO Connection 220.00

01 August 2018 U.S.

C-25- 71
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R
Tractors)
Equipment for Base Machine

60 In. Cutting Width Auto-Connect PTO Shaft

Three Cutting Blades Anti-Scalp Front Skid
7 Gauge Stamped Steel Deck Hinged Discharge Chute
Drive-Over Capability with Greasable Spindles
Tractor Alignment Guide Front Lip Reinforcement
Front and Rear Quick Release Mower Wash Port
Gauge Wheels with Memory
Settings

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

701ALV 60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R 1,906.00
Tractors)
For MY17 and newer 2025R Tractors.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English In Base Price

0413 French Same Price

0437 Spanish Same Price

0448 English No Text Same Price

Export English Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1100 Attaching Parts (Mechanical Mower Lift) 699.00

For MY17 and newer 2025R Tractors.

Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages.

1102 Attaching Parts (Independent Hydraulic Mower Lift) 1,267.00

Premium Independent Hydraulic Mower Lift for MY2017 and newer 2025R Tractors.

01 August 2018 U.S.

C-25- 72
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2025R
Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

Includes hydraulic cylinder, dedicated electro-hydraulic valve (with full control in both
the up and down directions), rocker switch, wire harnesses, hydraulic plumbing,
AutoConnect PTO shaft, and all AutoConnect mower deck linkages.

ATTACHMENTS FOR FIELD CONVERSION

Miscellaneous
BLV10956 Mechanical Mower Lift Kit 832.70
For MY17 and newer 2025R Tractors.

Includes AutoConnect PTO shaft and all AutoConnect mower deck linkages."

BLV10933 Premium Independent Hydraulic Mower Lift Kit 668.80

For MY2017 and newer 2025R tractors with 54D and 60D 7-Iron AutoConnect mower
decks.

Includes hydraulic cylinder, dedicated electro-hydraulic valve (with full control in both
the up and down directions), rocker switch, wire harnesses and hydraulic plumbing to
convert the mechanical lift system into a premium independent hydraulic lift system. If
there are no mower lift components installed on the tractor, you must also order and
install the Mechanical Mower Lift Kit (BLV10956) in addition to this kit.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM23978 60 HC Mulch kit 242.89
For use on AutoConnect 60D 7-Iron Deck installed on MY2017 and newer 2025R tractors.

01 August 2018 U.S.

C-25- 73
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractors)
Equipment for Base Machine

60 In. (152.4 cm) Cutting Width Settings

Three Cutting Blades Quick Release Belt Shields
7 Gauge Stamped Steel Deck Anti-Scalp Front Skid
Drive-Over Capability with Hinged Discharge Chute
Adjustable Tractor Alignment Greasable Spindles
Guide Front Lip Reinforcement
Front and Rear Quick Release
Gauge Wheels with Memory

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

7017LV 60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large 2,222.00
Frame, 3R Series, and 3120-3720 Tractors)
For MY2017 and newer 2032R and 2038R OOS Tractors.
For 4310-4410, 3120-3720, and 3033R-3046R Tractors.

The 60 In. deck is a close fit for the 3R and 3x20 Series Tractor. The right front tire can
rub against the spring pin in the top of the right front anti-scalp wheel post if it is in the
in-board-most position and the tire is too far to the right. Care must be exercised during
installation and removal of the deck.

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
and 3R Tractors Equipped with a PRT Transmission are NOT compatible with mid-mount
mowers.

3120-3720 Tractors Require Mid PTO. Mower Deck is Not Compatible with R3 Turf
Special Tires or R1 Tires. See Sales Manual for Tire/Mower Clearance Chart and
additional compatibility details.

LVB25820 Front Three-Point/Mid Mount Brackets is Required if Tractor is also equipped

with BLV10316, BLV10439 and BLV10452 Front Three-Point Hitch with A-Frame
(3033R-3046R and 3x20 Tractors Only) and a Mid-Mount Mower.

For Installation of Mid-Mount Mower on Cab Tractor, Must Order BLV11084. See Sales
Manual for 4310-4410 Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English In Base Price
English North American Operator's Manual and Decal Kit

01 August 2018 U.S.

C-25- 74
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

OPERATOR'S MANUAL Continued...

0413 French Same Price
French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHING PARTS
1004 AutoConnect Mower Lift 1,377.00
For 60D and 72D mower decks with SN 060001 and above.
For 3033R-3046R and 3120-3720 Tractors.

NOT COMPATIBLE with 3120-3720 Tractors equipped with PowrReverser Transmission

(PRT) (SN ending in 910000 and above).
NOT COMPATIBLE with 3033R-3046R Tractors Equipped with PRT.

The Mid Hydraulic Cylinder Lift Kit (included) allows the mower to be raised and lowered
independently of the rear implements using the dual selective control valve (SCV) (loader
joystick). If you do not wish to use the loader joystick to lift the mower deck, order the
Third SCV kit.

1295 Less AutoConnect Mower Lift In Base Price

1006 AutoConnect Mower Lift 1,734.00

For 60D and 72D mower decks.
For MY2017 and newer 2032R and 2038R OOS Tractors.

Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness,
actuator, rotary dial and raise/lower lever. System must be calibrated after installation to
insure accurate cut-heights. Refer to installation instructions for calibration procedure or
refer to ServiceADVISOR.

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10471 EH Third SCV (Cab Only) 1,218.80
For 3033R-3046R Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever. See Sales Manual (SCV Reference Table) for ordering details.

BLV10362 EH Third SCV (OOS Only) 1,218.80

For 3033R-3046R Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever. See Sales Manual (SCV Reference Table) for ordering details.

LVB25084 Third Selective Control Valve Kit 324.50

For 4310-4410 Tractors, Requires Dual SCV.

LVB25506 Third Selective Control Valve Kit (OOS Only) 284.90

For 3320-3720 Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever.

LVB24845 Third Selective control Valve Kit (Cab Only) 342.10

For 3320-3720 Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever.

01 August 2018 U.S.

C-25- 75
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
60D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BLV10432 AutoConnect Mower Lift Kit (3033R-3046R, 3120-3720, 4310-4410) 1,578.26
For 60D and 72D mower decks with SN 060001 and above. Includes Mid Hydraulic
Cylinder Lift Kit.

3R Tractors Equipped with PRT Transmission are NOT compatible with mid-mount
mowers.

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
are NOT compatible with Mid-Mount Mowers.

BLV10079 AutoConnect Mower Lift Kit (3120-3720, 4310-4410) 1,578.26

For 60D and 72D mower decks with SN 060001 and below. Includes Mid Hydraulic
Cylinder Lift Kit. Kit required for 3120-3720 and 4310-4410 tractors.

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
are NOT compatible with Mid-Mount Mowers.

BLV10593 AutoConnect Mower Lift Kit with CommandCut 2,053.70

For MY '17 and Newer 2032R and 2038R Tractors with 60D and 72D mower decks.

Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness,
actuator, rotary dial and raise/lower lever. System must be calibrated after installation to
insure accurate cut-heights. Refer to installation instructions for calibration procedure or
refer to ServiceAdvisor.

LVB25544 Bracket Kit 58.30

Required to Install 60D In. Mower on 4310-4410 Tractors
Manufactured after January 2003. See Sales Manual for
Specific Serial Numbers.

LVB25820 Front Three-Point Hitch/Mid Mount Mower Compatibility Brackets 173.80

The front 3-point hitch/mid-mount mower compatibility brackets are required for use on
AutoConenct Mowers that are being attached to a Front Three-Point Hitch with
BLV10439 (3033R-3046R) or LVB25878 (3120-3720).

Mulch Kits
BM23978 60 HC Mulch kit 242.89
For use on AutoConnect 60D 7-Iron Deck installed on MY2017 and newer 2032R and
2038R tractors.
For use on 60D mower decks installed on 3 Family tractors. If mower deck serial number
is prior to (XXXXXX - 50000) then use Mulch Kit TCB10953 instead.

TCB10953 Mulch Kit (1524-mm (60-in.) 7-Iron, 7-Iron II and 7-Iron PRO) 326.36
For use on 60D mower decks installed on 3 Family tractors. If mower deck serial number
is after (50001 - XXXXXX) then use Mulch Kit BM23978 instead.

01 August 2018 U.S.

C-25- 76
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320
Tractors)
Equipment for Base Machine

62 In. (1,575 mm) Cutting Width Hinged Discharge Chute

Three Cutting Blades Greasable Spindles
10 Gauge Stamped Steel Deck Front Lip Reinforcement
Front and Rear Quick Attaching Parts (See Code
Release Gauge Wheels with Selection)
Memory Settings Deck Lockup
Quick Release Belt Shields Mower Wash Port
Anti-Scalp Front Roller

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0185LV 62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320 2,645.00
Tractors)
For MY16 and older 2025R and 2320 Tractors.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1000 Attaching Parts (Mechanical Mower Lift) 371.00

For Independent Mower Lift, LVB25630

01 August 2018 U.S.

C-25- 77
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2025R and 2320
Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

must also be ordered.

ATTACHMENTS FOR FIELD CONVERSION

Attaching Parts
LVB25630 Independent Lift Kit for 2305, 2025R, 2320 Tractors 408.74
Requires LVB25620 (Code 1000) Attaching Parts.

Hydraulics
LVB25822 Loader and Mower Mechanical Diverter Valve Kit (2305, 2025R, 2320) 421.59

Miscellaneous
LVB25620 Attaching Parts for MY '16 and Older 2025R, 2320 Tractor (Mechanical Mower Lift) 425.86

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (MY '16 and Older 2025R, MY
'16 and Older 2032R, 2320, 2520, 2720, 4115).

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM21890 Mulch kit (62C/62D/62X) 237.54

01 August 2018 U.S.

C-25- 78
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and
2720 Tractors)
Equipment for Base Machine

62 In. (1,575 mm) Cutting Width Hinged Discharge Chute

Three Cutting Blades Greasable Spindles
10 Gauge Stamped Steel Deck Front Lip Reinforcement
Front and Rear Quick Attaching Parts (See Code
Release Gauge Wheels with Selection)
Memory Setting Mower Wash Port
Quick Release Belt Shields
Anti-Scalp Front Roller

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0195LV 62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and 3,085.00
2720 Tractors)
For MY2016 and older 2032R, 2520, 2720, and 4115 Tractor.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1000 Attaching Parts (Mechanical Mower Lift) 410.00

For Independent Mower Lift (Not Available for 4115), BLV10476

01 August 2018 U.S.

C-25- 79
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
62D In. OnRamp Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and
2720 Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

Must be Ordered with Code 1095 (Less Attaching Parts).

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10476 Independent Lift Kit for MY '16 and Older 2032R, 2520, 2720 955.90
Not Available for 4115 Tractor.

LVB25823 Loader/Mower Mechanical Diverter Valve Kit (MY '16 and Older 2032R, 2520, 2720) 559.90

Miscellaneous
LVB25902 Attaching Parts for MY '16 and Older 2032R, 2520, 2720, 4115 (Mechanical Mower Lift) 482.90

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (MY '16 and Older 2025R, MY
'16 and Older 2032R, 2320, 2520, 2720, 4115).

Mower Deck and Mower Deck Attachments

LVB24962 Mower Height Latch Kit 165.00
For Use with Mechanical Mower Lift.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

Mulch Kits
BM21890 Mulch kit (62C/62D/62X) 237.54

01 August 2018 U.S.

C-25- 80
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractor)
Equipment for Base Machine

72 In. (182.9 cm) Cutting Width Settings

Three Cutting Blades Quick Release Belt Shields
7 Gauge Stamped Steel Deck Anti-Scalp Front Skid
Drive-Over Capability with Hinged Discharge Chute
Adjustable Tractor Alignment Greasable Spindles
Guide Front Lip Reinforcement
Front and Rear Quick Release
Gauge Wheels with Memory

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

7027LV 72D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large 2,938.00
Frame, 3R Series, and 3120-3720 Tractor)
For MY2017 and newer 2032R and 2038R OOS Tractors.
For 4310-4410, 3120-3720, and 3033R-3046R Tractors

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
and 3R Tractors Equipped with a PRT Transmission are NOT compatible with mid-mount
mowers.

3120-3720 Tractors Require Mid PTO. Mower Deck is Not Compatible with R3 Turf
Special Tires or R1 Tires. See Sales Manual for Tire/Mower Clearance Chart and
additional compatibility details.

LVB25820 Front Three-Point/Mid Mount Brackets is Required if Tractor is also equipped

with BLV10316, BLV10439 and BLV10452 Front Three-Point Hitch with A-Frame
(3033R-3046R and 3x20 Tractors Only) and a Mid-Mount Mower.

For Installation of Mid-Mount Mower on Cab Tractor, Must Order BLV11084. See Sales
Manual for 4310-4410 Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English In Base Price
English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

01 August 2018 U.S.

C-25- 81
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractor)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

OPERATOR'S MANUAL Continued...

ATTACHING PARTS
1004 AutoConnect Mower Lift 1,377.00
For 60D and 72D mower decks with SN 060001 and above.
For 3033R-3046R and 3120-3720 Tractors.

NOT COMPATIBLE with 3120-3720 Tractors equipped with PowrReverser Transmission

(PRT) (SN ending in 910000 and above).
NOT COMPATIBLE with 3033R-3046R Tractors Equipped with PRT.

The Mid Hydraulic Cylinder Lift Kit (included) allows the mower to be raised and lowered
independently of the rear implements using the dual selective control valve (SCV) (loader
joystick). If you do not wish to use the loader joystick to lift the mower deck, order the
Third SCV kit.

1295 Less AutoConnect Mower Lift In Base Price

1006 AutoConnect Mower Lift 1,734.00

For 60D and 72D mower decks.
For MY2017 and newer 2032R and 2038R OOS Tractors.

Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness,
actuator, rotary dial and raise/lower lever. System must be calibrated after installation to
insure accurate cut-heights. Refer to installation instructions for calibration procedure or
refer to ServiceADVISOR.

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10471 EH Third SCV (Cab Only) 1,218.80
For 3033R-3046R Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever. See Sales Manual (SCV Reference Table) for ordering details.

BLV10362 EH Third SCV (OOS Only) 1,218.80

For 3033R-3046R Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever. See Sales Manual (SCV Reference Table) for ordering details.

LVB25084 Third Selective Control Valve Kit 324.50

For 4210-4410 Tractors. Requires Dual SCV.

LVB25506 Third Selective Control Valve Kit (OOS Only) 284.90

For 3320-3720 Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever.

LVB24845 Third Selective control Valve Kit (Cab Only) 342.10

For 3320-3720 Tractors. Includes Rear Mounted Couplers, Hydraulic Lines and SCV
Lever.

01 August 2018 U.S.

C-25- 82
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72D AutoConnect 7-Iron Mid-Mount Side Discharge Mower (MY17 and newer 2R Large
Frame, 3R Series, and 3120-3720 Tractor)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BLV10432 AutoConnect Mower Lift Kit (3033R-3046R, 3120-3720, 4310-4410) 1,578.26
For 60D and 72D mower decks with SN 060001 and above. Includes Mid Hydraulic
Cylinder Lift Kit.

3R Tractors Equipped with PRT Transmission are NOT compatible with mid-mount
mowers.

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
are NOT compatible with Mid-Mount Mowers.

BLV10079 AutoConnect Mower Lift Kit (3120-3720, 4310-4410) 1,578.26

For 60D and 72D mower decks with SN 060001 and below. Includes Mid Hydraulic
Cylinder Lift Kit. Kit required for 3120-3720 and 4310-4410 tractors.

3000 Twenty Tractors Equipped with PRT Transmission (SN ending in 910000 and above)
are NOT compatible with Mid-Mount Mowers.

BLV10593 AutoConnect Mower Lift Kit with CommandCut 2,053.70

For MY '17 and Newer 2032R and 2038R Tractors with 60D and 72D mower decks.

Includes all mower attaching parts plus CommandCut Height-of-Cut wiring harness,
actuator, rotary dial and raise/lower lever. System must be calibrated after installation to
insure accurate cut-heights. Refer to installation instructions for calibration procedure or
refer to ServiceAdvisor.

LVB25544 Bracket Kit 58.30

Required to Install 72D In. Mower on 4310-4410 Tractors
Manufactured after January 2003. See Sales Manual for
Specific Serial Numbers.

LVB25820 Front Three-Point Hitch/Mid Mount Mower Compatibility Brackets 173.80

The front 3-point hitch/mid-mount mower compatibility brackets are required for use on
AutoConenct Mowers that are being attached to a Front Three-Point Hitch with
BLV10439 (3033R-3046R) or LVB25878 (3120-3720).

LVB25302 Front-Attaching Support Kit 62.06

See Sales Manual for Front Attaching Support Requirements.

Mulch Kits
TCB10951 Mulch Kit (1828.8-mm (72-in.) 7-Iron, 7-Iron II and 7-Iron PRO) 331.70
For use on AutoConnect 72D mower decks installed on 3R Series and MY '17 and Newer
2032R and 2038R tractors.

01 August 2018 U.S.

C-25- 83
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72 In. Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and 2720
Tractors)
Equipment for Base Machine

72 In. (182.88 cm) Cutting Width Spring Loaded Front Gauge Wheels
Three Cutting Blades Anti-Scalp Rollers (3)
9 Gauge Stamped Steel Deck Hinged Discharge Chute
Front and Rear Adjustable Greasable Spindles
Gauge Wheels Front Lip Reinforcement
Mower Lift: Steel Rods from Attaching Parts (See Code
Tractor Rockshaft Selection)
Quick Release Belt Shields

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0045LV 72 In. Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and 2720 3,359.00
Tractors)
For 2032R, 2520, 2720, and 4115 Tractors

Tractors must be equipped with Front Attaching Support Kit. See Sales Manual for Front
Attaching Support Requirements.

If Tractor is Equipped with Hood Guard, Attaching Support Kit is not Required.

2520 Tractors with 200X or 200CX Hood Guard Require Attaching Support Kit.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

01 August 2018 U.S.

C-25- 84
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72 In. Mid-Mount Side Discharge Mower (MY16 and older 2032R, 2520, and 2720
Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

1003 Attaching Parts 598.00

ATTACHMENTS FOR FIELD CONVERSION

Miscellaneous
LVB25263 Attaching Parts 705.10

LVB25302 Front-Attaching Support Kit 62.06

See Sales Manual for Front Attaching Support Requirements.

Mower Deck and Mower Deck Attachments

LVB24962 Mower Height Latch Kit 165.00
For Use with Mechanical Mower Lift.

01 August 2018 U.S.

C-25- 85
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72 In. 7-Iron Mid-Mount Side Discharge Mower (4120-4720 Tractors)
Equipment for Base Machine

72 In. (182.88 cm) Cutting Width Anti-Scalp Rollers (2)

Three Cutting Blades Hinged Discharge Chute
7 Gauge Stamped Steel Deck Greasable Spindles
Front and Rear Adjustable Front Lip Reinforcement
Gauge Wheels Attaching Parts (See Code
Mowerlift: Steel Rods from Selection)
Tractor Rockshaft PTO Shaft (See Code Selection)
Removable Belt Shields Deck Lockup
Spring Loaded Front Gauge Wheels

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0046LV 72 In. 7-Iron Mid-Mount Side Discharge Mower (4120-4720 Tractors) 3,265.00
For 4120-4720, 4500-4700, and 4510-4710 Tractors

4000 Twenty Tractors with SN ending in 916000 (OOS) and 946000 (CAB) and above are
NOT compatible with Mid-Mount Mowers. Tractors Require Mid PTO.

Mower Deck is Not Compatible with R3 Turf Special or R1 Tires, R4 Tires will Rub if
Deck is Raised to Full Transport Height. See Sales Manual for Tire/Mower Clearance
Chart.

4510-4710 Tractors Require LVU14258 Oil Filter when Installing 72 In. Mower to
Prevent Contact Between the Oil Filter and Mower Lift System.

00 Series and 10 Series Tractors Require (2) M148759 Front Plates for Installation of
Mower Deck.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English In Base Price
English North American Operator's Manual and Decal Kit

0413 French Same Price

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHING PARTS
1995 Less Attaching Parts In Base Price

01 August 2018 U.S.

C-25- 86
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
72 In. 7-Iron Mid-Mount Side Discharge Mower (4120-4720 Tractors)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHING PARTS Continued...

1003 Attaching Parts 1,324.00
Includes PTO Shaft.

ATTACHMENTS FOR FIELD CONVERSION

Miscellaneous
LVB25554 7-Iron Deck Attaching Parts and PTO Shaft 1,560.90
00 Series and 10 Series Tractors require (2) M148759
Front Plates for Installation of Mower Deck.

Mulch Kits
TCB10951 Mulch Kit (1828.8-mm (72-in.) 7-Iron, 7-Iron II and 7-Iron PRO) 331.70

01 August 2018 U.S.

C-25- 87
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR RIDERS & TRACTORS
62-in. Shaft Drive Convertible/Edge Xtra Mower Deck (62C/62X)
Equipment for Base Machine

62-in. (157-cm) cutting width Four mower wheels and front

Side discharge Edge Xtra center roller
10-gauge, 0.135-in. (3.4-mm) Mower wheels rotate 90 degrees
stamped-steel deck shell for easy mower removal
Shaft drive
Three greaseable blade spindles
Mower wash port

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Horicon, Wisconsin

9072M 62-in. Shaft Drive Convertible/Edge Xtra Mower Deck (62C/62X) 1,700.00
For X400/X500 HDGTs (Heavy-Duty Garden Tractors), Model Year 2006-2012 X700
Series, 2210 and 2305 Compact Utility Tractors.

DESTINATION
0202 United States and Canada In Base Price

0195 Mexico Same Price

ATTACHING PARTS
1000 Attaching Parts for 2305, 2210 (Mechanical Mower Lift) 265.00

1001 Attaching Parts for 2305 (Independent Mower Lift) 487.00

Independent Lift is not Available on 2210.

1010 Less Attaching Parts In Base Price

ATTACHMENTS FOR FIELD CONVERSION

Attaching Parts
LVB25631 Attaching Parts for 2305 (Independent Mower Lift) 192.60
Requires LVB25630 independent lift kit. Not available for 2210 tractors.

LVB25419 Attaching Parts for 2305, 2210 (Mechanical Mower Lift) 303.89

LVB25630 Independent Lift Kit for 2305, 2025R, 2320 Tractors 408.74
Requires LVB25620 (option code 1001) attaching parts. Requires LVB25631 (independent
lift attaching parts). Not available for 2210 tractors.

Hydraulics
LVB25822 Loader and Mower Mechanical Diverter Valve Kit (2305, 2025R, 2320) 421.59
Diverter is not compatible with mechanical mower lift system.

Mower Decks
AM130907 Mower deck leveling gauge 6.95

01 August 2018 U.S.

C-25/L-35- 88
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR RIDERS & TRACTORS
62-in. Shaft Drive Convertible/Edge Xtra Mower Deck (62C/62X)
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM23648 Roller striping kit (X400/X500 HDGT, X700s) 286.76
Compatible with model year 2004- (SN 040, 001-) 54C, 54X, 62X, and 60-in. (152-cm)
7-Iron Mowers used on X400/X500 HDGT and X700 Ultimate Tractors. See Sales Manual
for additional parts requirements on model year 2004-2007 (SN 040,001-100,000) 54C,
54X, 62C and 62X Decks.

Mulch Kits
BM21890 Mulch kit (62C/62D/62X) 237.54

Spanish North American Kit

LVB26020 North American Spanish Labels 0.00

01 August 2018 U.S.

C-25/L-35- 89
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
3-Bag Power Flow System
Equipment for Base Machine

14 Bushel Capacity Less Power Flow

Polyethylene Hopper Top
3 Polyester Bags
Attaching Parts
Chute

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

140LGX 3-Bag Power Flow System 1,560.00

For 1023E, 1025R, 1026R, 2305, 2025R, MY2016 and Older 2032R, 2320, 2520, 2720,
2210 and 4115.

Tractors Require a High Performance Power Flow Kit for the

Appropriate Mower Deck Which Must be Ordered Separately.
Tractors Using OnRamp Mower Decks also Require Appropriate
OnRamp Belt Cover Kit. Not Compatible with 72-Inch Decks.
1023E, 1025R, 1026R, and 2025R (built after June 1st, 2017) also require a hitch plate
that must be ordered separately. (5) UC13263 Quik-Tatch Weights are Recommended for
Proper Ballast.

DESTINATION
0230 Australia Same Price

0184 Canada Same Price

024A Christmas Island Same Price

024B Heard Island and McDonald Islands Same Price

0079 Japan Same Price

0195 Mexico Same Price

0237 New Zealand Same Price

0202 United States In Base Price

024H United States Minor Outlying Islands Same Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0450 Australian Operator's Manual and Decal Kit Same Price

0409 English In Base Price

English North American Operator's Manual and Decal Kit

0413 French Same Price

01 August 2018 U.S.

C-25- 90
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
3-Bag Power Flow System
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

OPERATOR'S MANUAL Continued...

French Canadian Operator's Manual and Decal Kit

0437 Spanish Same Price

Spanish North American Operator's Manual and Decal Kit

ATTACHMENTS FOR FIELD CONVERSION

MCS Power Flow Blowers
BG20867 54 HC High-Performance Power Flow (X700 Signature Series) 658.06
For X700 Signature Series. Also for MY2017 and newer 2025R Tractors.

BM22697 54C/54X/54D High-Performance Power Flow blower 541.41

Miscellaneous
LVB24947 54D OnRamp Belt Cover Kit (MY '16 and Older 2025R, MY '16 and Older 2032R, 2320, 57.79
2520, 2720)
Required for Use with 54D OnRamp Mower Deck.

LVB24948 62D OnRamp Belt Cover Kit (MY '16 and Older 2025R, MY '16 and Older 2032R, 2320, 80.26
2520, 2720)
Required for Use with 62D OnRamp Mower Deck.

BLV10028 Hitch Plate for 3 Bag MCS 54.57

For use on 1023E, 1025R, 1026R, and MY2017 and newer 2025R Tractors. Required for
use with 54D and 60D mower decks.

LVB24957 Small Chassis MCS Chute 269.64

For 1023E, 1025R, 1026R, 2305, 2025R, MY '16 and Older 2032R, 2320, 2520, 2720,
2210 and 4115 Tractors.

Power Flow Blowers

BM24514 60 In. High Performance Power Flow 719.04
For use with 60D and 7-Iron Mower Decks X700, 1023E, 1025R, 1026R, and MY2017 and
newer 2025R Tractors).
Not compatible with Cabs on X700.

BM21496 62C/62X High-Performance Power Flow 541.41

Weights
UC13263 Quik-Tatch Weight, 42 lb (19 kg) 59.91
When Installed on 1023E, 1025R, 1026R, 2305, 2025R, MY '16 and Older 2032R, 2320,
2520, 2720, 2210, or 4115
Tractors, (1) M128726 Rod and (4) A15147 Spring
Clips are Required.

01 August 2018 U.S.

C-25- 91
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
52 in. Quick-Hitch Rotary Broom
Equipment for Base Machine

52 In. (1,321 mm) Clearing Width Heavy Duty No. 50 Chain Drive
"Straight" (2) Adjustable Rear Mounting
48 In. (1,219 mm) Clearing Width Caster Wheels
"Angled" Brush Head Height Adjustment
Storage Stands Three Spare Driveshaft Shear
21 In. (533 mm) Diameter Bolts "Mounted to Shell"
Polypropylene Brush
Gearbox with 3:1 Reduction

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

3880M 52 in. Quick-Hitch Rotary Broom 2,185.00

For X400/X500 Heavy Duty Garden Tractors, X700's, 1023E, 1025R, 1026R, 2210, 2305,
2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010, 4100, 4110, and 4115
Tractors.
BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors.
Not compatible with BM17347, 425-455 Quick-Hitch updated for use on X400/X500
HDGT's and X700's with BM20979 front-hitch angling retro-fit kit.
Compact tractors require dual selective control valve and front attaching support kit. See
Sales Manual for front attaching support requirements.

FRONT QUICK-HITCH
1000 Front Quick-Hitch and Hydraulic Lift 615.00
For X400/X500 Heavy Duty Garden Tractors, X700s, and X940s.

1012 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

1005 Front Quick-Hitch and Hydraulic Lift 656.00

For 2210 and 2305. Also requires LVB25396 front attaching support.

1006 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720, 4100, 4110, 4115).

1013 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R Tractors.

Includes BLV10680 front attaching support kit.

1010 Less Front Quick-Hitch In Base Price

HYDRAULIC ANGLING
2000 Hydraulic Angling 190.00

01 August 2018 U.S.

C-25/L-35- 92
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
52 in. Quick-Hitch Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

HYDRAULIC ANGLING Continued...

For X400/X500 Heavy Duty Garden Tractors, X700s, X940s, and X950R.

2006 Hydraulic Angling 198.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.

2009 Hydraulic Angling 260.00

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

2005 Hydraulic Angling 191.00

For 2210 and 2305.

2010 Less Hydraulic Angling In Base Price

FRONT POWER TAKE-OFF (PTO)

3003 2000 RPM Front PTO 259.00
For 4100 and 4110.

3004 2000 RPM Front PTO 259.00

For 4010 and 4115.

3005 2000 RPM Front PTO 281.00

For 2210 and 2305.

3006 2000 RPM Front PTO 258.00

For model year 2013-2016 2025R and 2320.

3017 2000 RPM Front PTO Kit 360.00

For model year 2017- 2025R.

3007 2000 RPM Front PTO 267.00

For model year 2013-2016 2032R, 2520, and 2720.

3016 2000 RPM Front PTO Kit 430.00

For 1023E, 1025R, and 1026R. See DTAC solution 111853 when used with BLV10159
Front Quick-Hitch. BLV10159 Front Quick-Hitch was available as an attachment through
parts, 47-in. Snow Blower (1474M) option code 2008, 54-in. Snow Blower (02C1M)
option code 2008, 52-in. Rotary Broom (3880M) option code 1001, and 60-in. Broom
(3790M) option code 2007. http://dtac.deere.com/Solutions/English/111853.htm

3010 Less 2000 RPM Front PTO In Base Price

3014 2-Wheel Drive 2000 RPM Front PTO 335.00

For X400 Heavy Duty Garden Tractors, X700, X720, X724, X740, X744, X710, X730,
X734, X750, and X754. Must be used with BM25775 implement drive shaft for rotary
brooms. BM25775 is available as an attachment through parts, 52-in. Rotary Broom
(3880M) option code 4004, and 60-in. Broom (3790M) option code 5004.

3015 4-Wheel Drive 2000 RPM Front PTO 335.00

For X500 Heavy Duty Garden Tractors, X728, X729, X748, X749, X738, X739, and X758.

IMPLEMENT DRIVE SHAFT

4000 Implement Drive Shaft 250.00
For 2210, 2305, 1023E, 1025R, and 1026R.

4006 Implement Drive Shaft 270.00

For model year 2017- 2025R.

01 August 2018 U.S.

C-25/L-35- 93
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
52 in. Quick-Hitch Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

IMPLEMENT DRIVE SHAFT Continued...

Includes BLV10900 implepment drive shaft and BLV10794 mounting frame.

4002 Implement Drive Shaft 263.00

For model year 2013-2016 2025R and 2032R, 2320, 2520, 2720, 4010, 4100, 4110, 4115
Tractors.

4004 Implement Drive Shaft 250.00

For X400/X500 Heavy Duty Garden Tractors and X700's.

4010 Less Implement Drive Shaft In Base Price

ATTACHMENTS FOR FIELD CONVERSION

Front Power Take-Off (PTO)
BLV10786 2000 RPM Front PTO 497.56
For 1023E, 1025R, and 1026R. Includes shaft to route mid-PTO to the front-PTO.
Includes front bearing and support structure. Includes RIO override for front implements.
See DTAC solution 111853 when used with BLV10159 Front Quick-Hitch. BLV10159
Front Quick-Hitch was available as an attachment through parts, 47-in. Snow Blower
(1474M) option code 2008, 54-in. Snow Blower (02C1M) option code 2008, 52-in. Rotary
Broom (3880M) option code 1001, and 60-in. Broom (3790M) option code 2007.
http://dtac.deere.com/Solutions/English/111853.htm

BLV10681 2000 RPM Front PTO 404.46

For model year 2017- 2025R, and 2026R. Includes shaft to route mid-PTO to the
front-PTO. Includes front bearing and support structure. Includes RIO override for front
implements.

BLV10475 2000 RPM Front PTO (model year 2013-2016 2032R, 2520, 2720, 3120-3720, 306.01
3033R-3046R)
Includes RIO override for front implements.

LVB25966 2000-rpm Front Power Take-Off (PTO) (2210, 2305) 323.14

BM18695 2000-rpm Front Power Take-Off (PTO) (4100, 4110) 297.46

LVB24900 2000-rpm Front Power Take-Off (PTO) (model year 2013-2016 2025R and 2320. 297.46

LVB25305 2000-rpm Front Power Take-Off (PTO) Kit (4010, 4115) 297.46

BM25304 2000-rpm front PTO (X400 and 2-wheel drive X700s) 385.20
BM25304 must be used with BM25772 implement drive and upstop for snow blowers, or
BM25775 implement drive shaft for rotary brooms. BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013. BM25775 is available as an attachment
through parts, 52-in. Rotary Broom (3880M) option code 4004, and 60-in. Broom
(3790M) option code 5004.

BM25305 2000-rpm front PTO (X500 HDGT and 4-wheel drive X700s) 385.20

Front Quick-Hitch
BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14
Fits also 2210 Tractors (for 47SB only).

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

01 August 2018 U.S.

C-25/L-35- 94
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
52 in. Quick-Hitch Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20
BM25609 hydraulic angling kit recommended

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Hydraulic Angling
BLV10880 Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 296.39

BM20922 Hydraulic angling (2210, 2305) 219.36

BM25609 Hydraulic angling (X400/X500 HDGTs, X700s, X940s) 217.21

LVB24901 Hydraulic angling (model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 226.84
2520, 2720, 4010, 4100, 4110, 4115)

Implement Drive Shaft

BM25775 Broom implement drive shaft (X400/X500 HDGT and X700s) 286.76

BM20836 Broom implement drive shaft (model year 2013-16 2025R/2032R, 2320, 2520, 2720, 301.74
4010, 4100, 4110, 4115)

BM21854 Implement Drive Shaft for Rotary Brooms 286.76

For use on 425-455, 2210, 2305, and 1023E, 1025R, and 1026R.

BLV10900 Implement Drive Shaft for Rotary Brooms 286.76

For model year 1023E, 1025R, 1026R, and model year 2017- 2025R.

Miscellaneous
BM21777 Deflector kit (52-in. Rotary Broom) 62.06

LVB25396 Front Attaching Support Kit (2305) 60.99

2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

01 August 2018 U.S.

C-25/L-35- 95
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
52 in. Quick-Hitch Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB25302 Front-Attaching Support Kit 62.06
For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

BM21853 Thatching-wheel kit (52-in. Rotary Broom) 268.57

Mounting Frame
BLV10794 52-in. Quick-Hitch Rotary Broom mounting frame 31.03
For 1023E, 1025R, 1026R, and model year 2017- 2025R.

Spanish North American Kit

BLV11054 52-in. Quick Hitch Rotary Broom Spanish kit (CUTs) 99.51

BM26530 52-in. Quick Hitch Rotary Broom and 60-in. Heavy-Duty Quick Hitch Rotary Broom 37.46
Spanish kit (X700s)

BLV11056 60-in. Heavy-Duty Quick Hitch Rotary Broom Spanish kit (CUTs) 101.66

01 August 2018 U.S.

C-25/L-35- 96
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Equipment for Base Machine

57 In. (1,448 mm) Clearing Width Chain and Sprocket Final Drive
"Straight" (2) Adjustable Rear Mounted
50 In. (1,270 mm) Clearing Width Caster Wheels
"Angled" Broom Head Float
Storage Stands Four Spare Driveshaft Shear
26 In. (660 mm) Diameter Bolts Two Sizes, "Mounted to
Polypropylene Brush Shell"
Gearbox with 3:1 Reduction

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

3790M 60 In. Heavy-Duty Rotary Broom 3,345.00

For X400/X500 Heavy Duty Garden Tractors, X700's, 1023E, 1025R, 1026R, 2305,
2025R, 2032R, 2036R, 2038R, 2320, 2520, 2720, 3120-3720, 3033R-3046R, 2210, 4010,
4100, 4110, 4115, and 4400-4410 Tractors.
BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors.
See Sales Manual for ballast requirements.
Not compatible with BM17347, 400-Series Quick-Hitch.
Compact tractors require dual selective control valve and mid PTO.
Small chassis compact tractors also require front attaching support kit. See Sales Manual
for front attaching support requirements.
3120-3720 Tractors with mid-mount mowers for use with front three-point hitch with
A-Frame require LVB25820 (AutoConnect decks) or LVB24810 (old 7-Iron decks).

MOUNTING FRAME
1000 Mounting Frame 392.00
For X400/X500 Heavy Duty Garden Tractors, X700s, 2210, 2305, 2320, 2520, 2720,
4010, 4100, 4110, 4115, model year 2013-2016 2025R, and model year 2013-2016 2032R.

1004 Mounting Frame 392.00

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

1001 Mounting Frame with Drive Shaft and Hydraulic Angling (4200-4400 and 4210-4410) 1,182.00
Option Code no longer available. Order the following pieces from parts: AM127788,
M140171, M40461, M144432, 19H2458, R50647, R121660, M140170, M140169,
AM128694, AM127787, M140165, AM128696, AM128695, AM124726 and AM124747.

1002 Mounting Frame with Drive Shaft and Hydraulic Angling 829.00
For 3033R-3046R, and 3120-3720.

1003 Mounting Frame with Drive Shaft and Hydraulic Angling 913.00
For model year 2017- 2032R, 2036R and 2038R.

1010 Less Mounting Frame In Base Price

FRONT QUICK-HITCH
2000 Front Quick-Hitch and Hydraulic Lift 616.00
For X400/X500 Heavy Duty Garden Tractors and X700's.

2002 Front Quick-Hitch and Hydraulic Lift 755.00

01 August 2018 U.S.

C-25/L-35- 97
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT QUICK-HITCH Continued...

For 4210-4410.

2004 Front Quick-Hitch and Hydraulic Lift 655.00

For 2210 and 2305.

Also requires LVB25396 front attaching support.

2005 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720,
4010,4100, 4110, and 4115.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720, 4100, 4110, 4115).

2012 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R Tractors.

Includes BLV10680 front attaching support kit.

2011 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

2008 Front Three-Point Hitch with A-Frame Quick Attach System 1,439.00
For 3120-3720, and 3033R-3046R.

2009 Front Three-Point Hitch with A-Frame Quick Attach System 1,544.00
For model year 2017- 2032R, 2036R and 2038R.

2010 Less Front Quick-Hitch and Hydraulic Lift In Base Price

HYDRAULIC ANGLING
Hydraulic Angling for 3120-3720, model year 2017- 2032R, 2036R, 2038R, 4200-4400,
and 4210-4410 Tractors are included in option codes 1001, 1002, and 1003.

3000 Hydraulic Angling 190.00

For X400/X500 Heavy Duty Garden Tractors and X700's.

3002 Hydraulic Angling Kit 191.00

For 2210 and 2305.

3003 Hydraulic Angling 198.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115.

3005 Hydraulic Angling 260.00

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

3010 Less Hydraulic Angling In Base Price

FRONT POWER TAKE-OFF (PTO)

4002 2000 RPM Front PTO Kit 259.00
For 4100 and 4110.

4003 2000 RPM Front PTO Kit 259.00

For 4010 and 4115.

01 August 2018 U.S.

C-25/L-35- 98
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT POWER TAKE-OFF (PTO) Continued...

4004 2000 RPM Front PTO Kit 220.00

For 4200-4400 and 4210-4410.

4005 2000 RPM Front PTO Kit 281.00

For 2210 and 2305.

4006 2000 RPM Front PTO Kit 258.00

For model year 2013-2016 2025R and 2320.

4017 2000 RPM Front PTO Kit 360.00

For model year 2017- 2025R.

4007 2000 RPM Front PTO Kit 267.00

For model year 2013-2016 2032R, 2520, 2720, 3033R-3046R, and 3120-3720.

4016 2000 RPM Front PTO Kit 430.00

For 1023E, 1025R, and 1026R. See DTAC solution 111853 when used with BLV10159
Front Quick-Hitch. BLV10159 Front Quick-Hitch was available as an attachment through
parts, 47-in. Snow Blower (1474M) option code 2008, 54-in. Snow Blower (02C1M)
option code 2008, 52-in. Rotary Broom (3880M) option code 1001, and 60-in. Broom
(3790M) option code 2007. http://dtac.deere.com/Solutions/English/111853.htm

4010 Less 2000 RPM Front PTO Kit In Base Price

4014 2-Wheel Drive 2000 RPM Front PTO 335.00

For X400 Heavy Duty Garden Tractors, X700, X720, X724, X740, X744, X710, X730,
X734, X750, and X754. Must be used with BM25775 implement drive shaft for rotary
brooms. BM25775 is available as an attachment through parts, 52-in. Rotary Broom
(3880M) option code 4004, and 60-in. Broom (3790M) option code 5004.

4015 4-Wheel Drive 2000 RPM Front PTO 335.00

For X500 Heavy Duty Garden Tractors, X728, X729, X748, X749, X738, X739, and X758.

4012 2000 RPM Front PTO Kit 292.00

For model year 2017- 2032R, 2036R and 2038R.

IMPLEMENT DRIVE SHAFT

Drive Shaft for Model Year 2017- 2032R, 2036R, 2038R, 3120-3720, 4200-4400 and
4210-4410 Tractors are Included in Option Codes 1001, 1002, and 1003.

5001 Implement Drive Shaft 263.00

For model year 2013-2016 2025R and 2032R, 2320, 2520, 2720, 4010, 4100, 4110, and
4115.

5003 Implement Drive Shaft 250.00

For 2210, 2305, 1023E, 1025R, and 1026R.

5005 Implement Drive Shaft 250.00

For model year 2017- 2025R Tractors.

5004 Implement Drive Shaft 250.00

For X400/X500 Heavy Duty Garden Tractors and X700's.

5010 Less Implement Drive Shaft In Base Price

ATTACHMENTS FOR FIELD CONVERSION

01 August 2018 U.S.

C-25/L-35- 99
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Front Power Take-Off (PTO)
BLV10786 2000 RPM Front PTO 497.56
For 1023E, 1025R, and 1026R. Includes shaft to route mid-PTO to the front-PTO.
Includes front bearing and support structure. Includes RIO override for front implements.
See DTAC solution 111853 when used with BLV10159 Front Quick-Hitch. BLV10159
Front Quick-Hitch was available as an attachment through parts, 47-in. Snow Blower
(1474M) option code 2008, 54-in. Snow Blower (02C1M) option code 2008, 52-in. Rotary
Broom (3880M) option code 1001, and 60-in. Broom (3790M) option code 2007.
http://dtac.deere.com/Solutions/English/111853.htm

BLV10681 2000 RPM Front PTO 404.46

For model year 2017- 2025R, and 2026R. Includes shaft to route mid-PTO to the
front-PTO. Includes front bearing and support structure. Includes RIO override for front
implements.

BLV10475 2000 RPM Front PTO (model year 2013-2016 2032R, 2520, 2720, 3120-3720, 306.01
3033R-3046R)
Includes RIO override for front implements.

BLV10633 2000 RPM Front PTO (model year 2017- 2032R, 2036R, and 2038R) 313.50
Includes RIO override for front implements.

LVB25966 2000-rpm Front Power Take-Off (PTO) (2210, 2305) 323.14

BM18695 2000-rpm Front Power Take-Off (PTO) (4100, 4110) 297.46

BM19576 2000-rpm Front Power Take-Off (PTO) (4200-4400, 4210-4410) 296.39

LVB24900 2000-rpm Front Power Take-Off (PTO) (model year 2013-2016 2025R and 2320. 297.46

LVB25305 2000-rpm Front Power Take-Off (PTO) Kit (4010, 4115) 297.46

BM25304 2000-rpm front PTO (X400 and 2-wheel drive X700s) 385.20
BM25304 must be used with BM25772 implement drive and upstop for snow blowers, or
BM25775 implement drive shaft for rotary brooms. BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013. BM25775 is available as an attachment
through parts, 52-in. Rotary Broom (3880M) option code 4004, and 60-in. Broom
(3790M) option code 5004.

BM25305 2000-rpm front PTO (X500 HDGT and 4-wheel drive X700s) 385.20

BLV10452 Front Power Take-Off (PTO) Bracket (3120-3720, 3033R-3046R) 92.40

Front Quick-Hitch
BLV10637 A-Frame Quick Attach System (3120-3720, 3033R-3046R, model year 2017- 2032R, 209.00
2036R, and 2038R tractors)

BLV10634 Auxiliary front hydraulic coupler kit (model year 2017- 2032R, 2036R, and 2038R 92.40
tractors)
Includes couplers, hoses, and brackets to route hydraulics from the mid-SCV to the front
three-point hitch.

LVB25878 Front 3-Point Hitch (3120-3720) 1,311.81

BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14

01 August 2018 U.S.

C-25/L-35- 100
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

BLV10439 Front Three-Point Hitch (3033R-3046R) 1,353.00

Requires BLV10452 (Front PTO Bracket).

BLV10631 Front Three-Point Hitch (model year 2017- 2032R, 2036R, and 2038R tractors) 1,353.00

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20
BM25609 hydraulic angling kit recommended

BLV10638 Hydraulic accumulator kit for Front Three-Point Hitch (model year 2017- 2032R, 2036R, 123.20
and 2038R tractors)
For use in applications where there is significant transporting done at higher speeds.
Accumulator system will absorb the bounce associated with front implements when
traveling on the roadway.

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Hydraulic Angling
BLV10880 Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 296.39

BM20922 Hydraulic angling (2210, 2305) 219.36

BM25609 Hydraulic angling (X400/X500 HDGTs, X700s, X940s) 217.21

LVB24901 Hydraulic angling (model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 226.84
2520, 2720, 4010, 4100, 4110, 4115)

Implement Drive Shaft

BM25775 Broom implement drive shaft (X400/X500 HDGT and X700s) 286.76

BM20836 Broom implement drive shaft (model year 2013-16 2025R/2032R, 2320, 2520, 2720, 301.74
4010, 4100, 4110, 4115)

BM21854 Implement Drive Shaft for Rotary Brooms 286.76

For use on 425-455, 2210, 2305, and 1023E, 1025R, and 1026R.

BLV10900 Implement Drive Shaft for Rotary Brooms 286.76

For model year 1023E, 1025R, 1026R, and model year 2017- 2025R.

LVB24956 Implement Drive Shaft for Rotary Brooms (3120-3720, 3033R-3046R) 174.41

BLV10800 Implement Drive Shaft for Rotary Brooms (model year 2017- 2032R, 2036R, and 224.70
2038R)

Miscellaneous
BM19805 Debris deflector (60-in. Heavy-Duty Rotary Broom) 417.30

LVB24810 Front 3-Point Hitch and Mid-Mount Mower Draft Arms 237.54
Required for use with LVB25878 Front Three-Point Hitch with A-Frame (3033R-3046R
and 3120-3720 Tractors Only) and old 7-Iron Mid-Mount Mowers.

01 August 2018 U.S.

C-25/L-35- 101
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
60 In. Heavy-Duty Rotary Broom
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB25396 Front Attaching Support Kit (2305) 60.99
2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

LVB25820 Front Three-Point Hitch/Mid Mount Mower Compatibility Brackets 173.80

Required for use with BLV10316, BLV10439 and BLV10452 Front Three-Point Hitch with
A-Frame (3120-3720 and 3033R-3046RTractors Only) and AutoConenct Mowers.

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

LVB25302 Front-Attaching Support Kit 62.06

For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

BM20706 Heavy-duty wheel kit (60-in. Heavy-Duty Rotary Broom) 361.66

AM128682 Wafers, Polypropylene Bristle (Pack of 16) 280.16

AM128683 Wafers, Steel Bristle (Pack of 16) 477.48

Mounting Frame
BM20626 60-in. Rotary Broom mounting frame 449.40
For use on X400/X500 HDGT's, X700s, 2210, 2305, model year 2013-2016 2025R, model
year 2013-2016 2032R, 2320, 2520, 2720, 4010, 4100, 4110, and 4115.

BLV10795 60-in. Rotary Broom mounting frame 449.40

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

BLV10776 Mounting Frame and Hydraulic Angling (3120-3720, 3033R-3046R, model year 2017- 754.36
2032R, 2036R, and 2038R)

Spanish North American Kit

BLV11054 52-in. Quick Hitch Rotary Broom Spanish kit (CUTs) 99.51

BM26530 52-in. Quick Hitch Rotary Broom and 60-in. Heavy-Duty Quick Hitch Rotary Broom 37.46
Spanish kit (X700s)

BLV11056 60-in. Heavy-Duty Quick Hitch Rotary Broom Spanish kit (CUTs) 101.66

01 August 2018 U.S.

C-25/L-35- 102
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
647 Rotary Tiller
Equipment for Base Machine

48 In. (1,219 mm) Tilling Width 6 Hybrid Tines per Flange

Drive Shaft (See Code Selection) 6 Flanges - Total of 36 Tines
Pre-set Slip Clutch 4 Position Adjustable Skidshoes
15-35 PTO HP Rated Main Gearbox ASA 60 Roller Chain
Breather on Gearbox and Chain Parking Stands
Case Adjustable Rear Hinged Cover
Dipstick on Gearbox Door
Sight Glass on Chain Case Center Mounted Cat 1 Hitch
7 In. (177 mm) Tilling Depth iMatch & Alpha Compatible
14 In. (368 mm) Rotor Diameter 3-Point Hitch

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0206LV 647 Rotary Tiller 2,618.00

For X400/X500 HDGT, X700 Series, 3005, 4005, 1023E, 1025R, 1026R, 3025E, 3032E,
3038E, 2210, 4010, 4100, 4110, 4115, 2305, 2025R, 2032R, 2038R, 2320-2720, 3203,
3033R-3039R, 3120-3720, and 4105 Tractors.

X400/X500HDGT and X700 Series Tractors Must be Equipped

with 540 RPM Rear PTO Drive and Category 1 3-Point Hitch.

FrontBallast is Required, See Sales Manual for Specific Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

DRIVE SHAFT
1000 Drive Shaft In Base Price

1001 Drive Shaft for X400/X500 HDGT and X700 Series Tractors 32.00
X400/X500 HDGT and X700 Series Tractors equipped with iMatch hitch should order
option code 1000 Drive Shaft for Compact Utility Tractors.

1995 Less Drive Shaft -328.00

BRACKETS

01 August 2018 U.S.

C-25/L-35- 103
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
647 Rotary Tiller
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

BRACKETS Continued...
2000 Brackets for Compact Utility Tractors In Base Price

2001 Brackets for X400/X500 HDGT and X700 Series Tractors Same Price

2995 Less Brackets -146.00

ATTACHMENTS FOR FIELD CONVERSION

AutoHitch Implement Side Components - Tillers
LVB25621 AutoHitch Implement Components for John Deere 647 236.50
LVB24978 AutoHitch Retrofit Kit is Required for Proper Installation on 647 Tillers With
Serial Numbers Prior to LV0647B010001.

LVB24978 AutoHitch Retrofit Kit (647 Tiller) 137.50

Required for Proper Installation on 647 Tillers With Serial Numbers Prior to
LV0647B010001.

LVB25675 iMatch AutoHitch PTO Coupler 561.00

Miscellaneous
BLV10442 Front Weight Bracket Extension Kit 238.70
Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to ten front Quik-Tatch weights.

Miscellaneous
LVB25769 Brackets for Compact Utility Tractors 166.91

LVB25770 Brackets for X400/X500 HDGT and X700 Series Tractors 166.91

LVB25518 Drive Shaft Kit (CUTS) 375.57

LVB25545 Drive Shaft Kit (X400/X500 HDGT's, X700's) 411.96

BLV10623 Front Weight Bracket Extension Kit (1023E, 1025R, 1026R, 2305, 2025R, 2026R, 2320, 216.70
2520)
Includes Extension Bracket and Hardware (Including Rod and Spring Pins).

Rear Power Take-Off (PTO)

BM21914 540-rpm rear PTO (X400/X500 HDGTs, X700s before June 2010 production) 990.81
Also order AM120840 Module for MY2005 and older X400 or X500 HDGTs.

Weights
BM20957 9-weight front weight bracket 192.60
For X400/X500 HDGT's, X700, X720, X724, X728, X729, X740, X744, X748, X749.

BM24363 9-weight front weight bracket 192.60

For X400/X500 HDGT's, X700's

LVBM19607 Front Quik-Tatch Weight Kit (3020 Series, 3203, 4105) 47.30
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH14083 Front Quik-Tatch Weight Kit (990, 4005) 42.81

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BM17998 Front Weight Bracket Extension Kit (790, 3005) 239.80

Includes Extension Bracket and Hardware (Including Rod and
Spring Pins) to Hold up to Four Quik-Tatch Weights.

01 August 2018 U.S.

C-25/L-35- 104
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
655 Rotary Tiller
Equipment for Base Machine

55 In. (1,397 mm) Tilling Width 15 In. (381 mm) Rotor Diameter
Drive Shaft (See Code Selection) 6 Hybrid Tines per Flange
Pre-set Slip Clutch 7 Flanges - Total of 42 Tines
15-35 PTO HP Rated Main Gearbox 4 Position Adjustable Skidshoes
Breather on Gearbox and Chain ASA 80 Roller Chain
Case Parking Stands
Dipstick on Gearbox Adjustable Rear Hinged Cover
Sight Glass on Chain Case Door Center Mounted Cat 1 Hitch
7 In. (177 mm) Tilling Depth iMatch Compatible 3-Point Hitch

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0216LV 655 Rotary Tiller 3,123.00

For 3005, 3025E, 3032E, 3038E, 3203, 4005, 790, 990, 4100, 4110, 4115, 2305, 2025R,
2032R, 2038R, 2320-2720, 4200-4400, 4210-4410, 3033R-3046R, 3120-3720 and 4105
Tractors.

Front Ballast is Required, See Sales Manual for specific requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

DRIVE SHAFT
1000 Drive Shaft In Base Price

1995 Less Drive Shaft -342.00

ATTACHMENTS FOR FIELD CONVERSION

AutoHitch Implement Side Components - Tillers
LVB25622 AutoHitch Implement Components for John Deere 655 278.30
LVB24946 AutoHitch Retrofit Kit is Required for Proper Installation on 655 Tillers With
Serial Numbers Prior to LV0655B010001.

01 August 2018 U.S.

C-25- 105
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
655 Rotary Tiller
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB24946 AutoHitch Retrofit Kit (655 Tiller) 173.80
Required for Proper Installation on 655 Tillers With Serial Numbers Prior to
LV0655B010001.

LVB25675 iMatch AutoHitch PTO Coupler 561.00

Miscellaneous
BLV10442 Front Weight Bracket Extension Kit 238.70
Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to ten front Quik-Tatch weights.

Miscellaneous
LVB25625 Drive Shaft 391.61

BLV10623 Front Weight Bracket Extension Kit (1023E, 1025R, 1026R, 2305, 2025R, 2026R, 2320, 216.70
2520)
Includes Extension Bracket and Hardware (Including Rod and Spring Pins).

Weights
LVBM19607 Front Quik-Tatch Weight Kit (3020 Series, 3203, 4105) 47.30
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH15318 Front Quik-Tatch Weight Kit (790, 3005) 24.98

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH14083 Front Quik-Tatch Weight Kit (990, 4005) 42.81

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

LVB24952 Front Weight Bracket Extension Kit 188.10

For 3032E and 3038E Tractors.
For MY '17 and Newer 2032R and 2038R Tractors.
Includes Extension Bracket and all Hardware (Including Rod and Spring Pins) to Hold up
to Ten Front Quik-Tatch Weights.

Black in Color.

BM17998 Front Weight Bracket Extension Kit (790, 3005) 239.80

Includes Extension Bracket and Hardware (Including Rod and
Spring Pins) to Hold up to Four Quik-Tatch Weights.

BM19780 Quik-Tatch Weight, 70 lb. 100.10

01 August 2018 U.S.

C-25- 106
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
665 Rotary Tiller
Equipment for Base Machine

65 In. (1,651 mm) Tilling Width 6 Hybrid Tines per Flange

Drive Shaft (See Code Selection) 8 Flanges - Total of 48 Tines
Pre-set Slip Clutch 4 Position Adjustable Skidshoes
30-50 PTO HP Rated Main Gearbox ASA 100 Roller Chain
Breather on Gearbox and Chain Parking Stands
Case Adjustable Rear Hinged Cover
Dipstick on Gearbox Door
Sight Glass on Chain Case Center Mounted Cat 1 Hitch
7 In. (177 mm) Tilling Depth iMatch Compatible 3-Point Hitch
16 In. (406 mm) Rotor Diameter

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0226LV 665 Rotary Tiller 3,820.00

For 3038E, 4005, 790, 990, 2038R, 4300-4700, 4310-4710, 3520,
3720, 3039R-3046R, 4105 and 4120-4320 Tractors.

Front Ballast is Required, See Sales Manual for Specific Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

DRIVE SHAFT
1000 Drive Shaft In Base Price

1995 Less Drive Shaft -391.00

ATTACHMENTS FOR FIELD CONVERSION

AutoHitch Implement Side Components - Tillers
LVB25676 AutoHitch Implement Components for John Deere 665, 673 313.50
LVB25744 AutoHitch Retrofit Kit is Required for Proper Installation on 665 Tillers With
Serial Numbers Prior to LV0665B010001, and 673 Tillers With Serial Numbers Prior to
LV0673B010001.

LVB25675 iMatch AutoHitch PTO Coupler 561.00

01 August 2018 U.S.

C-25- 107
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
665 Rotary Tiller
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
LVB25705 Front Quik-Tatch Weight Kit 45.10
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BLV10442 Front Weight Bracket Extension Kit 238.70

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to ten front Quik-Tatch weights.

BLV10441 Front Weight Bracket Extension Kit 255.20

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to twelve front Quik-Tatch weights.

Miscellaneous
LVB25626 Drive Shaft 448.33

Weights
LVBM19607 Front Quik-Tatch Weight Kit (3020 Series, 3203, 4105) 47.30
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH15318 Front Quik-Tatch Weight Kit (790, 3005) 24.98

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH14083 Front Quik-Tatch Weight Kit (990, 4005) 42.81

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

LVB24952 Front Weight Bracket Extension Kit 188.10

For 3032E and 3038E Tractors.
For MY '17 and Newer 2032R and 2038R Tractors.
Includes Extension Bracket and all Hardware (Including Rod and Spring Pins) to Hold up
to Ten Front Quik-Tatch Weights.

Black in Color.

BM17998 Front Weight Bracket Extension Kit (790, 3005) 239.80

Includes Extension Bracket and Hardware (Including Rod and
Spring Pins) to Hold up to Four Quik-Tatch Weights.

BM19780 Quik-Tatch Weight, 70 lb. 100.10

01 August 2018 U.S.

C-25- 108
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
673 Rotary Tiller
Equipment for Base Machine

73 In. (1,855 mm) Tilling Width 6 Hybrid Tines per Flange

Drive Shaft (See Code Selection) 9 Flanges - Total of 54 Tines
Pre-set Slip Clutch 4 Position Adjustable Skidshoes
30-50 PTO HP Rated Main Gearbox ASA 100 Roller Chain
Breather on Gearbox and Chain Parking Stands
Case Adjustable Rear Hinged Cover
Dipstick on Gearbox Door
Sight Glass on Chain Case Center Mounted Cat 1 Hitch
7 In. (177 mm) Tilling Depth iMatch Compatible 3-Point Hitch
16 In. (406 mm) Rotor Diameter

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0236LV 673 Rotary Tiller 4,521.00

For 4005, 990, 4500-4600, 3038E, 3520, 3720, 3039R-3046R, 4510-4710, 4105,
4120, 4320 Tractors.

Front Ballast is Required, See Sales Manual for Specific Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0195 Mexico Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

DRIVE SHAFT
1000 Drive Shaft In Base Price

1995 Less Drive Shaft -391.00

ATTACHMENTS FOR FIELD CONVERSION

AutoHitch Implement Side Components - Tillers
LVB25676 AutoHitch Implement Components for John Deere 665, 673 313.50
LVB25744 AutoHitch Retrofit Kit is Required for Proper Installation on 665 Tillers With
Serial Numbers Prior to LV0665B010001, and 673 Tillers With Serial Numbers Prior to
LV0673B010001.

01 August 2018 U.S.

C-25- 109
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
673 Rotary Tiller
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB25675 iMatch AutoHitch PTO Coupler 561.00

Miscellaneous
LVB25705 Front Quik-Tatch Weight Kit 45.10
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BLV10442 Front Weight Bracket Extension Kit 238.70

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to ten front Quik-Tatch weights.

BLV10441 Front Weight Bracket Extension Kit 255.20

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to twelve front Quik-Tatch weights.

Miscellaneous
LVB25626 Drive Shaft 448.33

Weights
LVBM19607 Front Quik-Tatch Weight Kit (3020 Series, 3203, 4105) 47.30
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH14083 Front Quik-Tatch Weight Kit (990, 4005) 42.81

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BM19780 Quik-Tatch Weight, 70 lb. 100.10

01 August 2018 U.S.

C-25- 110
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
681 Rotary Tiller
Equipment for Base Machine

81 In. Tilling Width 18 In. Rotor Diameter PTO Drive Shaft

540 PTO Shaft Drive with 6 Hybrid Tines per Flange
"Quick Lock" Collar 8 Flanges - Total of 48 Tines
Pre-set Slip Clutch 4 Position Adjustable Skidshoes
35-60 PTO HP Rated Main Gearbox Gear Driveline
Breather on Gearbox and Chain Parking Stands
Case Adjustable Rear Hinged Cover
Dipstick on Gearbox Door
Sight Glass on Chain Case Center Mounted Cat 1 Hitch
8 In. Tilling Depth iMatch Compatible 3-Point Hitch

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

0246LV 681 Rotary Tiller 5,365.00

For 4005, 990, 4500-4600, 4510-4710, 3720, 3046R, 4120-4720
and 5000 Series Tractors.

Front Ballast is Required, See Sales Manual for Specific Requirements.

DESTINATION
0184 Canada Same Price

0202 United States In Base Price

0205 Quebec Same Price

0195 Mexico Same Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

DRIVE SHAFT
1000 Drive Shaft In Base Price

1995 Less Drive Shaft -458.00

ATTACHMENTS FOR FIELD CONVERSION

AutoHitch Implement Side Components - Tillers
LVB25675 iMatch AutoHitch PTO Coupler 561.00

01 August 2018 U.S.

C-25- 111
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
681 Rotary Tiller
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
LVB25705 Front Quik-Tatch Weight Kit 45.10
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BLV10442 Front Weight Bracket Extension Kit 238.70

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to ten front Quik-Tatch weights.

BLV10441 Front Weight Bracket Extension Kit 255.20

Includes Extension Bracket and All Hardware (Including rod and spring pins) to hold up
to twelve front Quik-Tatch weights.

Miscellaneous
LVB25627 Drive Shaft 525.37

Weights
LVBM19607 Front Quik-Tatch Weight Kit (3020 Series, 3203, 4105) 47.30
Includes Rod and Spring Pins for Front Quik-Tatch Weights.

CH14083 Front Quik-Tatch Weight Kit (990, 4005) 42.81

Includes Rod and Spring Pins for Front Quik-Tatch Weights.

BM19780 Quik-Tatch Weight, 70 lb. 100.10

01 August 2018 U.S.

C-25- 112
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
47 In. Quick-Hitch Two-Stage Snow Blower
Equipment for Base Machine

Hydraulic Discharge Chute Wear Plates

Rotation 100 Degrees Right and Reversible and Replaceable
Left Scraper Blade
47 In. Clearing Width "Straight" Four Extra Shear Bolts "Shell
15.5 In. Diameter Impeller Mounted"
16 In. Diameter Auger Hydraulic Chute Angling
Shear Bolt Protection Less Front Quick-Hitch
Adjustable Spout Cap Deflector Less Front PTO
Two-Stage Design Less Implement Drive and Upstop

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

1474M 47 In. Quick-Hitch Two-Stage Snow Blower 2,130.00

For 425, 445, 455, X400/X500 Heavy Duty Garden Tractors, X700's, 1023E, 1025R,
1026R, 2210, 2305, 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010, 4100,
4110, 4115 Tractors.
BM20761 hydraulic coupler kit required on 425, X465, X475, X700, and X710 Tractors.
Compact tractors require dual selective control valve and front attaching support kit. See
Sales Manual for front attaching support requirements.
See Sales Manual for ballast requirements.

FRONT QUICK-HITCH
2000 Front Quick-Hitch and Hydraulic Lift 625.00
For 425, 445, and 455.

2005 Front Quick-Hitch and Hydraulic Lift 615.00

For X400-X500 Heavy Duty Garden Tractors, X700s, and X940s.

2006 Front Quick-Hitch and Hydraulic Lift 656.00

For 2210, 2305 Tractors.
Also requires LVB25396 front attaching support.

2007 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110, and 4115 Tractors.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720, 4100, 4110, 4115).

2013 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R Tractors.

Includes BLV10680 front attaching support kit.

2012 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

2010 Less Front Quick-Hitch In Base Price

01 August 2018 U.S.

C-25/L-35- 113
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
47 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT POWER TAKE-OFF (PTO)

3000 2000 RPM Front PTO 236.00
For 425, 445, and 455.

3003 2000 RPM Front PTO 259.00

For 4100 and 4110.

3006 2000 RPM Front PTO 259.00

For 4010 and 4115.

3007 2000 RPM Front PTO 281.00

For 2210, 2305 Tractors.

3008 2000 RPM Front PTO Kit 258.00

For model year 2013-2016 2025R and 2320.

3017 2000 RPM Front PTO Kit 360.00

For model year 2017- 2025R.

3016 2000 RPM Front PTO Kit 430.00

For 1023E, 1025R, and 1026R. See DTAC solution 111853 when used with BLV10159
Front Quick-Hitch. BLV10159 Front Quick-Hitch was available as an attachment
through parts, 47-in. Snow Blower (1474M) option code 2008, 54-in. Snow Blower
(02C1M) option code 2008, 52-in. Rotary Broom (3880M) option code 1001, and 60-in.
Broom (3790M) option code 2007. http://dtac.deere.com/Solutions/English/111853.htm

3009 2000 RPM Front PTO 267.00

For model year 2013-2016 2032R, 2520-2720, 3120-3720, and 3033R-3046R.

3010 Less Power Take Off In Base Price

3014 2-Wheel Drive 2000 RPM Front PTO 335.00

For X400 Heavy Duty Garden Tractors, X700, X720, X724, X740, X744, X710, X730,
X734, X750, and X754. Must be used with BM25772 implement drive and upstop.
BM25772 is available as an attachment through parts, BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013.

3015 4-Wheel Drive 2000 RPM Front PTO 335.00

For X500 Heavy Duty Garden Tractors, X728, X729, X748, X749, X738, X739, and X758.

IMPLEMENT DRIVE AND UPSTOP

4000 Implement Drive and Upstop 221.00
For 425, 445, and 455.

4005 Implement Drive and Upstop 369.00

For model year 2013-2016 2025R, 2013-2016 2032R, 2320, 2520, 2720, 4010, 4100,
4110, and 4115 tractors.

4014 Implement Drive and Upstop 421.00

For 2210, 2305, 1023E, 1025R, 1026R, and model year 2017- 2025R.

Includes BLV10899 implement drive shaft and BLV10793 upstop.

4010 Less Implement Drive and Upstop In Base Price

01 August 2018 U.S.

C-25/L-35- 114
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
47 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

IMPLEMENT DRIVE AND UPSTOP Continued...

4013 Implement Drive and Upstop 267.00
For X400/X500 Heavy Duty Garden Tractors and X700's.

ATTACHMENTS FOR FIELD CONVERSION

Front Power Take-Off (PTO)
BLV10786 2000 RPM Front PTO 497.56
For 1023E, 1025R, and 1026R. Includes shaft to route mid-PTO to the front-PTO.
Includes front bearing and support structure. Includes RIO override for front implements.
See DTAC solution 111853 when used with BLV10159 Front Quick-Hitch. BLV10159
Front Quick-Hitch was available as an attachment through parts, 47-in. Snow Blower
(1474M) option code 2008, 54-in. Snow Blower (02C1M) option code 2008, 52-in. Rotary
Broom (3880M) option code 1001, and 60-in. Broom (3790M) option code 2007.
http://dtac.deere.com/Solutions/English/111853.htm

BLV10681 2000 RPM Front PTO 404.46

For model year 2017- 2025R, and 2026R. Includes shaft to route mid-PTO to the
front-PTO. Includes front bearing and support structure. Includes RIO override for front
implements.

BLV10475 2000 RPM Front PTO (model year 2013-2016 2032R, 2520, 2720, 3120-3720, 306.01
3033R-3046R)
Includes RIO override for front implements.

LVB25966 2000-rpm Front Power Take-Off (PTO) (2210, 2305) 323.14

BM18695 2000-rpm Front Power Take-Off (PTO) (4100, 4110) 297.46

LVB24900 2000-rpm Front Power Take-Off (PTO) (model year 2013-2016 2025R and 2320. 297.46

LVB25305 2000-rpm Front Power Take-Off (PTO) Kit (4010, 4115) 297.46

BM25304 2000-rpm front PTO (X400 and 2-wheel drive X700s) 385.20
BM25304 must be used with BM25772 implement drive and upstop for snow blowers, or
BM25775 implement drive shaft for rotary brooms. BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013. BM25775 is available as an attachment
through parts, 52-in. Rotary Broom (3880M) option code 4004, and 60-in. Broom
(3790M) option code 5004.

BM25305 2000-rpm front PTO (X500 HDGT and 4-wheel drive X700s) 385.20

BM17330 2000-rpm front power take-off (PTO) (415, 425, 445, 455) 270.71

Front Quick-Hitch
BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14
Fits also 2210 Tractors (for 47SB only).

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

01 August 2018 U.S.

C-25/L-35- 115
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
47 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM20896 Hydraulic retro kit 28.89
Required to fit a Customer's 425, 445 and 455 Snow Blower or
Snow Thrower on a New X400/X500 HDGT or X700 Series Tractor.

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Implement Drive and Upstop

LVB24902 Implement Drive and Upstop 423.71
For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, 2720, 4010,
4100, 4110 and 4115 Tractors (for 47SB only).

BM20871 Implement Drive and Upstop (425, 445, 455, F900's) 253.59

BM25772 Implement drive and upstop (X400/X500 HDGT and X700s) 307.09

BLV10793 Snow Blower Attaching Kit (Upstop) 187.26

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

BLV10899 Snow Blower Drive Shaft 296.39

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

Miscellaneous
M88984 Drift Blade 31.38
For snow blowers. Requires two 19H1914 bolts and two N10217 lock nuts.

BLV10843 Electric Remote Spout Control Kit 284.61

For model year 2017- 2025R. Requires separate chassis harness for tractor.

LVB25396 Front Attaching Support Kit (2305) 60.99

2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

LVB25302 Front-Attaching Support Kit 62.06

For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

AM119321 Heavy-duty skid shoe (1) 61.59

For 47-in. Quick Hitch Snow Blowers (SN -060,000)

AM128337 Left-Side Skid Shoe Plate and Hardware 50.41

01 August 2018 U.S.

C-25/L-35- 116
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
47 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BM20960 Remote Spout Cap Control Kit 126.26
For 425-455, 318, 322, 332, 420, 430, X400/X500 HDGT's, F900's,
X700's, 2210, 2305, 4010, 4100, 4110, 4115 Tractors. See Sales
Manual for Required Attaching Parts.

LVB24958 Remote Spout Cap Control Kit 156.21

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, and 2720
tractors. See Sales Manual for required attaching parts.

LVB26213 Remote Spout Cap Control Kit 209.71

For 1023E, 1025R and 1026R Tractors

BLV10720 Remote Spout Control - Chassis Harness 205.44

For model year 2017- 2025R.

AM128336 Right-Side Skid Shoe Plate and Hardware 50.41

M157831 Skid shoe, Plastic (1) 25.76

Used on 44-in. (112-cm) and 47-in. (119-cm) Snow Blowers. Two required.

Spanish North American Kit

BLV11058 47-in. and 54-in. Quick Hitch Snowblower Spanish kit (CUTs) 87.74

01 August 2018 U.S.

C-25/L-35- 117
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 In. Quick-Hitch Two-Stage Snow Blower
Equipment for Base Machine

Hydraulic Discharge Chute Wear Plates

Rotation 100 Degrees Right and Reversible and Replaceable
Left Scraper Blade
54 In. Clearing Width "Straight" Four Extra Shear Bolts "Shell
15 In. Diameter Impeller Mounted"
16 In. Diameter Auger Hydraulic Chute Angling
Shear Bolt Protection Less Front Quick-Hitch
Adjustable Spout Cap Deflector Less Front PTO
Two-Stage Design Less Implement Drive and Upstop

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa

02C1M 54 In. Quick-Hitch Two-Stage Snow Blower 2,550.00

For X400/X500 Heavy Duty Garden Tractors, X700's, 1023E, 1025R, 1026R, 2305,
2025R, model year 2013-2016 2032R, 2320-2720 Tractors.
BM20761 hydraulic coupler kit required on X465, X475, X700, and X710 Tractors.
Compact tractors require dual selective control valve and front attaching support kit. See
Sales Manual for front attaching support requirements.
See Sales Manual for ballast requirements.

FRONT QUICK-HITCH
2005 Front Quick-Hitch and Hydraulic Lift 615.00
For X400-X500 Heavy Duty Garden Tractors, X700s, and X940s.

2006 Front Quick-Hitch and Hydraulic Lift 656.00

For 2305 Tractor.
Also requires LVB25396 front attaching support.

2007 Front Quick-Hitch and Hydraulic Lift 716.00

For model year 2013-2016 2025R, model year 2013-2016 2032R, and 2320, 2520, 2720
Tractors.
Also requires LVB24895 front attaching support (model year 2013-2016 2025R and
2320).
Also requires LVB25302 front attaching support (model year 2013-2016 2032R, 2520,
2720).

2013 Front Quick-Hitch and Hydraulic Lift 845.00

For model year 2017- 2025R Tractors.

Includes BLV10680 front attaching support kit.

2012 Front Quick-Hitch and Hydraulic Lift 835.00

For 1023E, 1025R, and 1026R.

Includes BLV10796 front attaching support kit.

2010 Less Front Quick-Hitch In Base Price

FRONT POWER TAKE-OFF (PTO)

3007 2000 RPM Front PTO 281.00

01 August 2018 U.S.

C-25/L-35- 118
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT POWER TAKE-OFF (PTO) Continued...

For 2305 Tractor.

3008 2000 RPM Front PTO Kit 258.00

For model year 2013-2016 2025R and 2320.

3017 2000 RPM Front PTO Kit 360.00

For model year 2017- 2025R.

3016 2000 RPM Front PTO Kit 430.00

For 1023E, 1025R, and 1026R. See DTAC solution 111853 when used with BLV10159
Front Quick-Hitch. BLV10159 Front Quick-Hitch was available as an attachment
through parts, 47-in. Snow Blower (1474M) option code 2008, 54-in. Snow Blower
(02C1M) option code 2008, 52-in. Rotary Broom (3880M) option code 1001, and 60-in.
Broom (3790M) option code 2007. http://dtac.deere.com/Solutions/English/111853.htm

3009 2000 RPM Front PTO 267.00

For model year 2013-2016 2032R, 2520-2720, 3120-3720, and 3033R-3046R.

3010 Less Power Take Off In Base Price

3014 2-Wheel Drive 2000 RPM Front PTO 335.00

For X400 Heavy Duty Garden Tractors, X700, X720, X724, X740, X744, X710, X730,
X734, X750, and X754. Must be used with BM25772 implement drive and upstop.
BM25772 is available as an attachment through parts, BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013.

3015 4-Wheel Drive 2000 RPM Front PTO 335.00

For X500 Heavy Duty Garden Tractors, X728, X729, X748, X749, X738, X739, and X758.

IMPLEMENT DRIVE AND UPSTOP

4005 Implement Drive and Upstop 288.00
For model year 2013-2016 2025R, 2013-2016 2032R, 2320, 2520, and 2720 tractors.

4014 Implement Drive and Upstop 421.00

For 2210, 2305, 1023E, 1025R, 1026R, and model year 2017- 2025R.

Includes BLV10899 implement drive shaft and BLV10793 upstop.

4010 Less Implement Drive and Upstop In Base Price

4013 Implement Drive and Upstop 267.00

For X400/X500 Heavy Duty Garden Tractors and X700's.

ATTACHMENTS FOR FIELD CONVERSION

Front Power Take-Off (PTO)
BLV10786 2000 RPM Front PTO 497.56
For 1023E, 1025R, and 1026R. Includes shaft to route mid-PTO to the front-PTO.
Includes front bearing and support structure. Includes RIO override for front implements.
See DTAC solution 111853 when used with BLV10159 Front Quick-Hitch. BLV10159
Front Quick-Hitch was available as an attachment through parts, 47-in. Snow Blower
(1474M) option code 2008, 54-in. Snow Blower (02C1M) option code 2008, 52-in. Rotary
Broom (3880M) option code 1001, and 60-in. Broom (3790M) option code 2007.
http://dtac.deere.com/Solutions/English/111853.htm

01 August 2018 U.S.

C-25/L-35- 119
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BLV10681 2000 RPM Front PTO 404.46
For model year 2017- 2025R, and 2026R. Includes shaft to route mid-PTO to the
front-PTO. Includes front bearing and support structure. Includes RIO override for front
implements.

BLV10475 2000 RPM Front PTO (model year 2013-2016 2032R, 2520, 2720, 3120-3720, 306.01
3033R-3046R)
Includes RIO override for front implements.

LVB25966 2000-rpm Front Power Take-Off (PTO) (2210, 2305) 323.14

LVB24900 2000-rpm Front Power Take-Off (PTO) (model year 2013-2016 2025R and 2320. 297.46

BM25304 2000-rpm front PTO (X400 and 2-wheel drive X700s) 385.20
BM25304 must be used with BM25772 implement drive and upstop for snow blowers, or
BM25775 implement drive shaft for rotary brooms. BM25772 is available as an
attachment through parts, 47-in. Snow Blower (1474M) option code 4013, and 54-in.
Snow Blower (02C1M ) option code 4013. BM25775 is available as an attachment
through parts, 52-in. Rotary Broom (3880M) option code 4004, and 60-in. Broom
(3790M) option code 5004.

BM25305 2000-rpm front PTO (X500 HDGT and 4-wheel drive X700s) 385.20

Front Quick-Hitch
BM20921 Front Quick-Hitch and Hydraulic Lift (2305) 751.14
Fits also 2210 Tractors (for 47SB only).

LVB24898 Front Quick-Hitch and Hydraulic Lift (model year 2013-2016 2025R, model year 820.69
2013-2016 2032R, 2320, 2520, 2720)
Fits also 4010, 4100, 4110 and 4115 Tractors for 47SB only.

BM26236 Front quick hitch and hydraulic lift (X400/X500 HDGTs, X700s, X940s) 706.20

BM20761 Hydraulic coupler kit 56.71

Required on X700, X710, X465, X475, and 425 Tractors

BLV10708 Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) 770.40

Implement Drive and Upstop

BM23238 Implement Drive and Upstop 330.63
For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, and 2720
tractors.

BM25772 Implement drive and upstop (X400/X500 HDGT and X700s) 307.09

BLV10793 Snow Blower Attaching Kit (Upstop) 187.26

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

BLV10899 Snow Blower Drive Shaft 296.39

For 1023E, 1025R, 1026R, and model year 2017- 2025R.

Miscellaneous
M88984 Drift Blade 31.38
For snow blowers. Requires two 19H1914 bolts and two N10217 lock nuts.

BLV10843 Electric Remote Spout Control Kit 284.61

For model year 2017- 2025R. Requires separate chassis harness for tractor.

01 August 2018 U.S.

C-25/L-35- 120
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY AND GARDEN TRACTORS
54 In. Quick-Hitch Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

LVB25396 Front Attaching Support Kit (2305) 60.99
2210 and 2305 Tractors with 200X or 200CX hood guard require attaching support kit.
Fits also 2210 Tractors (for 47SB only.) See Sales Manual for front attaching support
requirements.

LVB24895 Front Attaching Support Kit (model year 2013-2016 2025R, 2320) 88.81
2025R and 2320 tractors with 200X or 200CX hood guard require attaching support kit.
See sales manual for front attaching support requirements.

BLV10796 Front Attaching Support kit (1023E, 1025R, 1026R) 267.50

BLV10680 Front Attaching Support kit (model year 2017- 2025R, 2026R) 276.06

LVB24899 Front Hitch/Mid-Mount Mower Combo Bracket (model year 2013-2016 2025R, model 132.69
year 2013-2016 2032R, 2320-2720)
Compatible with 4115 Tractor also. Required for Tool Free Change Between 54D or 62D
OnRamp Mid-Mount Mower and Quik-Tatch Front Hitch (model year 2013-2016 2025R,
model year 2013-2016 2032R, 2320-2720)

BM20753 Front light kit 211.86

For X400/X500 HDGT and X700 Series Garden Tractors.

LVB25302 Front-Attaching Support Kit 62.06

For model year 2013-2016 2032R, 2520, 2720, 4100, 4110, 4115 tractors. If tractor is
equipped with hood guard, attaching support kit is not required. See Sales Manual for
front attaching support requirements.

AM128337 Left-Side Skid Shoe Plate and Hardware 50.41

BM20960 Remote Spout Cap Control Kit 126.26

For 425-455, 318, 322, 332, 420, 430, X400/X500 HDGT's, F900's,
X700's, 2210, 2305, 4010, 4100, 4110, 4115 Tractors. See Sales
Manual for Required Attaching Parts.

LVB24958 Remote Spout Cap Control Kit 156.21

For model year 2013-2016 2025R, model year 2013-2016 2032R, 2320, 2520, and 2720
tractors. See Sales Manual for required attaching parts.

LVB26213 Remote Spout Cap Control Kit 209.71

For 1023E, 1025R and 1026R Tractors

BLV10720 Remote Spout Control - Chassis Harness 205.44

For model year 2017- 2025R.

AM128336 Right-Side Skid Shoe Plate and Hardware 50.41

M157831 Skid shoe, Plastic (1) 25.76

Used on 44-in. (112-cm) and 47-in. (119-cm) Snow Blowers. Two required.

Spanish North American Kit

BLV11058 47-in. and 54-in. Quick Hitch Snowblower Spanish kit (CUTs) 87.74

01 August 2018 U.S.

C-25/L-35- 121
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
59 In. Two-Stage Snow Blower
Equipment for Base Machine

Hydraulic Discharge Chute Wear Plates

Rotation 100 Degrees Right and Reversible and Replaceable
Left Scraper Blade
59 In. Clearing Width "Straight" Hydraulic Chute Angling
16 In. Diameter Impeller Less Front Hitch
16 In. Diameter Auger Less Front PTO
Shear Bolt Protection Less Mounting Kit and Less
Adjustable Spout Cap Deflector Snow Blower Driveshaft
Two-Stage Design

List Price
Attachment Suggested
Code Identifier Description USD ($)

Select One Code From Each Required Category

BASE MACHINE
F.O.B. Davenport, Iowa.

2759M 59 In. Two-Stage Snow Blower 4,317.00

For 3033R-3046R, 3120-3720, 3005, 790, 855, 955, 670, 770, 4200-4400, 4210-4410
Tractors. Also for MY2017 and Newer 2032R and 2038R Tractors. For Use with Front
Three-Point Hitch with A-Frame. Tractors Require Dual SCV, Mid PTO and Rear Wheel
Ballasting. 3120-3720 Tractors with Mid-Mount Mowers Require LVB24810. Current 59
In. Snow Blowers Ordered for 4200-4400 or 4210-4410 Tractors can be Converted to
Work with 3120-3720 Tractors by Using the Following Bundle Numbers: LVB24815,
LVB24801, LVB25741, LVB24800.

DESTINATION
0205 Quebec Same Price

0184 Canada Same Price

0202 United States In Base Price

OPERATOR'S MANUAL
0409 English North American Operator's Manual and Decal Kit In Base Price

0413 French Canadian Operator's Manual and Decal Kit Same Price

0437 Spanish North American Operator's Manual and Decal Kit Same Price

MOUNTING KIT / DRIVESHAFT

6833 Snow Blower Mounting Kit and Driveshaft 623.00
For 3005, 855, 955, 670, 770, 790, 4200-4400, 4210-4410 Tractors.

6834 Snow Blower Mounting Kit and Driveshaft 326.00

For 3033R-3046R, 3120-3720 Tractors.

6835 Less Snow Blower Mounting Kit and Driveshaft In Base Price

6836 Snow Blower Mounting Kit and Driveshaft 326.00

For MY2017 and Newer 2032R and 2038R Tractors.

01 August 2018 U.S.

C-25- 122
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
59 In. Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

FRONT HITCH
6941 Front Quick-Hitch and Hydraulic Lift 755.00
For 4210-4410 Tractors.

6950 Front Three-Point Hitch with A-Frame Quick Attach System 1,404.00
For 3120-3720 and 3033R-3046 Tractors.

6967 Less Front Hitch and Less Hydraulic Lift In Base Price

6951 Front Three-Point Hitch with A-Frame Quick Attach System 1,404.00
For MY2017 and Newer 2032R and 2038R Tractors.

FRONT POWER TAKE-OFF (PTO)

6880 2000 RPM Front PTO 259.00
For 4200-4400, 4210-4410 Tractors.

6882 2000 RPM Front PTO 387.00

For 670 Tractors.

6883 2000 RPM Front PTO 398.00

For 770, 790, 3005 Tractors.

6884 2000 RPM Front PTO 364.00

For 855, 955 Tractors.

6885 2000 RPM Front PTO 267.00

For 3033R-3046R, 3120-3720 Tractors.

6910 Less 2000 RPM Front PTO In Base Price

6886 2000 RPM Front PTO 266.00

For MY2017 and Newer 2032R and 2038R Tractors.

ATTACHMENTS FOR FIELD CONVERSION

Front PTO
BM16856 2000 RPM Front PTO (670) 444.06

BM21379 2000 RPM Front PTO (770, 790, 3005) 455.81

BM16494 2000 RPM Front PTO (855, 955) 417.30

Front Power Take-Off (PTO)

BLV10475 2000 RPM Front PTO (model year 2013-2016 2032R, 2520, 2720, 3120-3720, 306.01
3033R-3046R)
Includes RIO override for front implements.

BLV10633 2000 RPM Front PTO (model year 2017- 2032R, 2036R, and 2038R) 313.50
Includes RIO override for front implements.

BM19576 2000-rpm Front Power Take-Off (PTO) (4200-4400, 4210-4410) 296.39

BLV10452 Front Power Take-Off (PTO) Bracket (3120-3720, 3033R-3046R) 92.40

01 August 2018 U.S.

C-25- 123
 JOHN DEERE TURF & UTILITY PRODUCTS
EQUIPMENT FOR COMPACT UTILITY TRACTORS
59 In. Two-Stage Snow Blower
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Front Quick-Hitch
BLV10637 A-Frame Quick Attach System (3120-3720, 3033R-3046R, model year 2017- 2032R, 209.00
2036R, and 2038R tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.

BLV10634 Auxiliary front hydraulic coupler kit (model year 2017- 2032R, 2036R, and 2038R 92.40
tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.
Includes couplers, hoses, and brackets to route hydraulics from the mid-SCV to the front
three-point hitch.

LVB25878 Front 3-Point Hitch (3120-3720) 1,311.81

BLV10439 Front Three-Point Hitch (3033R-3046R) 1,353.00

BLV10631 Front Three-Point Hitch (model year 2017- 2032R, 2036R, and 2038R tractors) 1,353.00
For use on MY '17 and newer 2032R and 2038R Tractors.

BLV10638 Hydraulic accumulator kit for Front Three-Point Hitch (model year 2017- 2032R, 2036R, 123.20
and 2038R tractors)
For use on MY '17 and newer 2032R and 2038R Tractors.
For use in applications where there is significant transporting done at higher speeds.
Accumulator system will absorb the bounce associated with front implements when
traveling on the roadway.

Miscellaneous
LVB24810 Front 3-Point Hitch and Mid-Mount Mower Draft Arms 237.54

AM128337 Left-Side Skid Shoe Plate and Hardware 50.41

AM128336 Right-Side Skid Shoe Plate and Hardware 50.41

LVB24800 Snow Blower Drive Shaft (3033R-3046R, 3120-3720) 160.50

BLV10799 Snow Blower Drive Shaft (MY '17 and newer 2032R and 2038R) 165.00

LVB25741 Snow Blower Mounting Kit (3033R-3046R, 3120-3720) 212.93

Requires Snow Blower Driveshaft LVB24800.

BLV10715 Snow Blower Mounting Kit (MY '17 and newer 2032R and 2038R) 218.90
Requires Snow Blower Driveshaft BLV10799.

BM21660 Snow Blower Mounting Kit and Driveshaft 714.76

(3005, 855, 955, 670, 770, 790, 3005, 4200-4400, 4210-4410)

01 August 2018 U.S.

C-25- 124
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 7 Backhoe (For 3005, 790, 770 Open Station Tractors)
Equipment for Base Machine

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BLV10039 Power Beyond Kit (Cab and OOS) 414.70
Includes Rear Mounted Hydraulic Couplers and Hoses for Use with Backhoe on
4044M/R-4066M/R Tractors. See Sales Manual (SCV Reference Table) or ordering
details.

Hydraulics
BM18005 Power Beyond Kit (3005, 790, 770) 325.60

BM16763 Power Beyond Kit (55 Series) 290.40

See Sales Manual for Serial Number Breaks.

Miscellaneous
BM19558 13 In. Bucket (1.04 Cu. Ft.) 506.00

BM19559 16 In. Bucket (1.33 Cu. Ft.) 544.50

BM19560 20 In. Bucket (1.74 Cu. Ft.) 641.30

BM19557 9 In. Bucket (0.64 Cu. Ft.) 445.50

Miscellaneous
BM22373 Mountings, Hydraulics, Subframe and Rear Hanger Brackets for 1,607.10
3005, 770 and 790 Tractors with 419, 300 or 70 Loader

Operator Environment
AM107212 10 In. Extension for Roll-Gard Cross Tube 183.98
Required for Use with 7 Backhoe on 3005, 790 and 770 Tractors.

AM119856 Tall Roll-Gard 715.56

Required for Use with 7 Backhoe on 755, 855, 955 Tractors.

01 August 2018 U.S.

125
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 8B Backhoe (For 4005, 990, 870, 970, 1070 Open Station Tractors)
Equipment for Base Machine

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION

Hydraulics
BM18010 Power Beyond Kit 350.90

Miscellaneous
BM19568 12 In. Standard Bucket (1.53 Cu. Ft.) 720.50

BM19569 18 In. Standard Bucket (2.47 Cu. Ft.) 811.80

BM19570 24 In. Standard Bucket (3.48 Cu. Ft.) 910.80

Miscellaneous
AH75164 Elbow Assy., 90 Degree Adjustable 12.19
Order AH75164 or AV43772 When 8, 8A or 8B Backhoe is Mounted on 850 (SN 009000
and Below) or 950 (SN 012000 and Below) Tractors.

BM17019 Mountings, Hydraulics, Subframe and Rear Hanger Brackets (4005, 870, 970, 990, 1,725.90
1070)

01 August 2018 U.S.

126
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Equipment for Base Machine

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box
BW15074 Ballast Box Extension 138.60
Compatible with 200X, 200CX, 300, 300X, 3000CX, 305, 400X, 400CX, D120, H120 and
H130 loaders.

Buckets
BW14144 49 In. (1250mm) Loader Materials Bucket - Quik Change 756.80
Compatible with 200X and 200CX loaders.

BW15896 49 in. (1250mm) Materials Bucket - Pin ON 700.70

Compatible with 200X and 200CX, H130 loaders.

BW14145 53 In. (1350mm) Loader Materials Bucket - Quik Change 820.60

Compatible with 200X, 200CX, 300, 300X, and H130 loaders.

AT332288 56 in. Dirt Bucket (12.3 cu. ft.) with Edge 948.00
Compatible with 300CX loaders.

AT333697 60 in. Dirt Bucket (14.3 cu. ft.) with Edge 1,007.00
Compatible with 300CX loaders.

BW14764 61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,062.60
Compatible with 300, 300X, 300CX, 400X and 400CX loaders.

BW15863 61 In. (1550mm) Loader Materials Bucket 870.10

Compatible with 305 loaders.

BW14146 61 In. (1550mm) Loader Materials Bucket - Quik Change 870.10

Compatible with 200X, 200CX, 300, 300X, 300CX, 400X , 400CX and H130 loaders.

LVB25342 72 In. Quik-Tatch Heavy Duty Front Loader Bucket 1,443.20

w/Replaceable Cutting Edge
Requires Skid Steer Attachment Carrier.
Compatible with 400X and 400CX loaders.

LVB25341 72 In. Quik-Tatch Standard Front Loader Bucket 1,200.10

Requires Skid Steer Attachment Carrier.
Compatible with 300CX, 400X and 400CX loaders.

BW14765 73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge 1,235.30
Compatible with 300CX, 400X and 400CX loaders.

BW14658 73 In. (1850 mm) Loader High Volume Bucket 1,441.00

Compatible with 300CX, 400X and 400CX loaders.

BW14147 73 In. (1850mm) Loader Materials Bucket 1,029.60

Compatible with 300, 300X, 300CX loaders.

LVB25345 84 In. Light Material Bucket 1,477.30

Requires Skid Steer Attachment Carrier.
Compatible with 400X and 400CX loaders.

01 August 2018 U.S.

127
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW15273 85 In. (2150 mm) Loader High Volume Bucket 1,763.30
Compatible with 300CX, 400X and 400CX loaders.

Carrier
BW15939 John Deere CUT Carrier 308.00
Compatible with Quick-Change Buckets.
Compatible with 200X , 200CX and H130 loaders.

Cutting Edges
BW14762 61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware 162.80
Compatible with 300, 300X, 300CX, 400X and 400CX loaders.

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware 200.20
Compatible with 300, 300X, 300CX, 400X and 400CX loaders.

Hood Guards
BW16989 Deluxe Brush Guard Attachment 165.00
Compatible with 200X, 200CX, 300, 300X, 300CX, 400X and 400CX loaders.

BWA1190 Deluxe Hood Guard 591.80

For 3000 TWENTY tractors.
Compatible with 300X and 300CX loaders.

BW15222 Deluxe Hood Guard Attachment 335.50

For 3000 TWENTY tractors.
For 4000 TWENTY tractors.
Compatible with 300X, 300CX, 400X and 400CX loaders.

BW14378 Hood Guard 266.20

For 4200-4400, 4210-4400 Tractors.
For 4500-4700, 4510-4710 Tractors.
Compatible with 300X, 300CX, 400X and 400CX loaders.

BW15219 Hood Guard 266.20

For 3000 TWENTY tractors.
Compatible with 300X and 300CX loaders.

BW15416 Hood Guard 266.20

For 970, 990 and 1070 Tractors. Required For Loader
Installation on 970, 990, 1070 Tractors, Includes
Front Weight Bracket.
Compatible with 320R, H165 and 300CX loaders.

LVB25998 Hood Guard 266.20

Hood Guard is Standard with 305 and D160 Loaders.
Compatible with 305 loaders.

BW15848 Hood Guard (3005, 4005) 266.20

Compatible with 320R, H165, 300 and 300CX loaders.

BW15534 Hood Guard (3203) 266.20

Compatible with 320R, H165, 300, 300X, 300CX loaders.

BW16040 Hood Guard (4105) 266.20

Compatible with 320R, H165 and 300CX loaders.

BW15221 Hood Guard (4120-4720) 266.20

Compatible with 400X and 400CX loaders.

01 August 2018 U.S.

128
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW15350 Hood Guard (770, 790) 266.20
Compatible with 300 loaders.

BW15634 Hood Guard (MY '16 and Older 2032R, 2520, 2720 Tractors) 266.20
Compatible with 200X , 200CX and H130 Loaders.

BW15217 Hood Guard (MY '16 and older 2025R (Yanmar built), 2320, 2210 and 2305 Tractors) 250.80
Compatible with 200X, 200CX and H130 Loaders.

Hydraulics
BW16448 3rd Function hydraulic lines and hoses 420.20
Compatible with 200X, 200CX, 300, 300CX, 400X and 400CX loaders.

BW15349 Hoses and Parts 311.30

For 3005, 770, 790 Tractors.
Compatible with 300 loaders.

BW15352 Hoses and Parts 311.30

For 4005, 990, 970, 1070 Tractors.
Compatible with 300CX loaders.

BW15599 Hoses and Parts 311.30

For 3203 and 4105.
Compatible with 300X and 300CX loaders.

BW15760 Hoses and Parts 311.30

Compatible with 400X and 400CX loaders.

BW15762 Hoses and Parts 311.30

For 3120, 3320, 3520, 3720, 4300, 4400, 4310 and 4410 Open Station Tractors.
For 3320, 3520 and 3720 Cab Tractors.
Compatible with 300CX loaders.

BW15406 Hoses and Parts (Couplers) 311.30

For 2305, 2320, 2520, 2720.
Compatible with 200X, 200CX and H130 loaders.

BW16138 Hydraulic Lines and Hoses (3 Function) 432.30

If Used with Skid Steer Attachments, Couplers will not Match.
The Following Parts are Required to Convert for this Application:
(1) KV14216, (1) KV15976 and (2) AT191333.
Compatible with 300CX loaders.

BW16139 Hydraulic Lines and Hoses (3 Function) 432.30

If Used with Skid Steer Attachments, Couplers will not Match.
The Following Parts are Required to Convert for this Application:
(1) KV14216, (1) KV15976 and (2) AT191333.
Compatible with 400X and 400CX loaders.

Miscellaneous
BW15056 iMatch Bushing Kit 97.90
For using ballast box with iMatch system.
Compatible with 200X, 200CX, D120, H120, H130, 300, 300X, 300CX, 305, 400X and
400CX loaders.

01 August 2018 U.S.

129
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

Miscellaneous
BW15073 Ballast Box 292.60
Compatible with 200X, 200CX, 300, 300X, 3000CX, 305, 400X, 400CX, D120, H120 and
H130 loaders.

BW15223 Bucket Level Indicator 67.10

Compatible with 300, 300X. 300CX and 400X loaders.

BW15476 Bucket Level Indicator 64.90

Compatible with 200X and 200CX loaders.

BW15446 Bucket Level Indicator 71.50

Compatible with 400CX loaders.

AW34729 Coupler Conversion Kit 25.19

Compatible with 400CX loaders.

AW34781 European CE (France) Anti-Drop Valve Kit 2,062.43

Compatible with 200CX, 400X and 400CX loaders.

BW15357 Oil Line Conversion Kit 258.50

For 770, 790 Serial No. - LV0790G790000.
Compatible with 300 loaders.

BW15872 Parking Stand Kit 424.60

Compatible with 305 loaders.

BW15244 Skid Steer Attachment Carrier 667.70

See Sales Manual for Compatible Attachments.
Compatible with 300CX, 400X and 400CX loaders.

Mounting Frames
BW15347 Mounting Frame 508.20
Compatible with 300CX loaders.

BW15324 Mounting Frame 427.90

Compatible with 200X , 200CX and H130 loaders.

BW15426 Mounting Frame 427.90

Compatible with 200X, 200CX and H130 loaders.

BW15731 Mounting Frame 427.90

Compatible with 200X, 200CX and H130 loaders.

BW15730 Mounting Frame 427.90

Compatible with 200X, 200CX, and H130 loaders.

BW15206 Mounting Frame (3005, 770, 790) 508.20

3005, 770, 790 Hood Guard (BW15350) is Required to Install Loader.
Compatible with 300 loaders.

BW15456 Mounting Frame (3320-3720, 4320-4720 Cab Tractors) 508.20

Compatible with 300X, 300CX, 400X and 400CX loaders.

BW15682 Mounting Frame (4105) 508.20

Compatible with 300CX loaders.

01 August 2018 U.S.

130
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW15204 Mounting Frame (4200-4400, 4210-4400, 3120-3720, 3203 508.20
Open Station Tractors)
Compatible with 300, 300X and 300CX loaders.

BW15205 Mounting Frame (4500-4700, 4510-4710, 4120-4720 Open Station Tractors) 508.20
Compatible with 400X and 400CX loaders.

BWA1191 Mounting Frame with Hoses 819.50

For 3120, 3320, 3520, 3720, 3203, 4200, 4300, 4400, 4210, 4310, and 4410 Open Station
Tractors.
For 3203 Tractors.
Compatible with 300X and 300CX loaders.

BWA1201 Mounting Frame with Hoses (4005, 990, 970, 1070 Tractors) 819.50
Must Order Appropriate Hood Guard. For 970, 990 (Serial
No. - LV0990G590000) and 1070 Tractors, Refer to Parts Catalog
for Additional Oil Lines Required.
Compatible with 300CX loaders.

BWA1276 Mounting Frame with Hoses and Parts (3320-3720 Cab Tractors) 819.50
Compatible with 300CX loaders.

BWA1248 Mounting Frame with Hoses and Parts (3320-3720 Cab Tractors) 819.50
Compatible with 300X loaders.

BWA1452 Mounting Frame with Hoses and Parts (4105) 819.50

Compatible with 300CX loaders.

BWA1200 Mounting Frame with Hoses and Parts (4300-4400, 819.50

4310-4410, 3120-3720 Open Station Tractors)
Compatible with 300CX loaders.

BWA1199 Mounting Frame with Hoses and Parts and Hood Guard 1,344.20
(770, 790 Serial No.- LV0790G790000)
Compatible with 300 loaders.

BWA1198 Mounting Frame with Hoses and Parts and Hood Guard 1,085.70
(For 790 Serial No. LV0790G790001-)
Compatible with 300 loaders.

BWA1503 Mounting Frame with Hoses and Parts and Hood Guard (3005) 1,085.70
Compatible with 300 loaders.

BWA1355 Mounting Frame with Hoses and Parts and Hood Guard (3203) 1,085.70
Compatible with 300 loaders.

OPERATOR'S MANUAL AND DECAL KIT

BW16397 French North American operator's manual and decal kit See Parts
Compatible with 305 loaders.

BW15835 Spanish North American operator's manual and decal kit 0.00
Compatible with 305 loaders.

Tooth Bars
BW15227 61 In. (1550 mm) Tooth Bar for Bucket 490.60
Recommended for use with heavy-duty buckets only.
Compatible with 300, 300X, 305, 400X and 400CX loaders.

01 August 2018 U.S.

131
 JOHN DEERE TURF & UTILITY PRODUCTS
Attachments for 200X, 200CX, 300, 300X, 300CX, 305, 400X, 400CX, D120, D160, H120
and H130 Compact Utility Tractor Loaders
Continued

List Price
Attachment Suggested
Code Identifier Description USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...

BW15228 73 In. (1850 mm) Tooth Bar for Bucket 595.10
Recommended for use with heavy-duty buckets only.
Compatible with 300, 300X, 305, 400X and 400CX loaders.

01 August 2018 U.S.

132