BAR CHART OF TRACK MACHINE WST-8146
23.12.22 24.12.22 25.12.22 26.12.22 27.12.22 28.12.22 29.12.22 30.12.22 31.12.22 01.01.23 02.01.23 03.01.23 04.01.23 05.01.23 06.01.23 07.01.23 08.01.23 09.01.23 10.01.23 11.01.23 12.01.23 13.01.23
S.n Description of work
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
PH
1 Repalcement of both Tamping Unit
Departmantial work
2
Repalce the Tamping Unit UP/DN cylinder
seal kit 02 nos.
Departmantial work
3
Repalcement Tamping Unit adjustable
sansing pneumatic cylinder
Departmantial work
Re-conditioning of lifting roller discs by
4
filling materials machining to get the
required profile part no. DL-150-01, 08
nos. Satyam ent.
Re-conditioning of lining rollers by filling
material on worn out surface with hard
5 facing materials machining tom get the
required profile part no. 2E-150-23AS, 04
Satyam ent.
Nos.
6 Repairing of lifting & lining unit
Satyam ent.
Repairing of central feeler rods by
7 providing the gun metal bushes size ID-25
mm & L-45 mm, OD-35 mm Satyam ent.
Repairing of track lifting cylinder by
8
repalcing seal & machining gland bushes
& piston of cylinder, providing pin and
bush at rear end of cylinder Satyam ent.
Repairing of track lining cylinder by
replacing seal and machining gland bushes
9 of cylinder and check of leakage, providing
pin, rocker bush at rear end & repairing of
psiton rod thread and U bracket Satyam ent.
10 Cleaning of engine radiator
Deutz
11
clarning of hydraulic cooler part no.
HY157.100/SIL
Departmantial work
Repairing of support cylinder UD50.2600
12 by repalcing seal kit and testing for
leakage Satyam ent.
13
Repalcing and fixing of wiper blades as per
sample Satyam ent.
14 Replacement of brake shoes
Departmantial work
15 Profiling of all sansing trolley wheels
Satyam ent. Satyam ent.
16
Repairing/filling of N2 gas in hydraulic
accumulators Satyam ent.
17
Providing & fixing of Upper & lower side
guide rod bolts of tamping units PH Satyam ent.
18 Providing of hex bolts 16X80.
Departmantial work
Repairing of axle support cylinder by
19 providing seal kit & testing of leakage on
load Satyam ent.
20
Supply of crimped grease hoses (ID 04
mm) assembly with fittings. Satyam ent.
21 Cleaning of Diesel tank
Departmantial work
22 Cleaning of cooling coil
Departmantial work
23
Checking & gearsing the bearing of all
axles
Departmantial work
24
Greasing the bearing of all sensing trolley
wheels
Departmantial work
25
Clearing oil hydrualic air tank & topup, if
required
Departmantial work
26
Cleaning of all panel boxes & checking of
all wire connection
Departmantial work
27
Repalcing of hydraulic hoses and
pneumatic hoses, if required
Departmantial work
28 Overhauling of all transducer
HI-TRON
29
Calibration of M/c by plasser service
engineer
30 Engine attend by deutz service engineer
repalcement of hydraulic, pneumatic
31 switch, coupler, proximity switch, if
required
HI-TRON
32 Overhauling of the air unloader
Departmantial work
33 Calibration of bogie turning pin pivot
Departmantial work
34
Replacement of hydraulic valve &
pneumatic valve, if required Departmantial work
BAR CHART OF TRACK MACHINE WST-8146
23.12.22 24.12.22 25.12.22 26.12.22 27.12.22 28.12.22 29.12.22 30.12.22 31.12.22 01.01.23 02.01.23 03.01.23 04.01.23 05.01.23 06.01.23 07.01.23 08.01.23 09.01.23 10.01.23 11.01.23 12.01.23 13.01.23
S.n Description of work
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
35 Welding work of M/c, if required
Departmantial work
36 Replacement of both cabin door lock
Departmantial work
37 Cleaning of machine
Departmantial work
38 Replacement of Batteries, if required
Satyam ent.
Satyam Enterprises JE/TMMD/Shopfloor SSE/TMMD/KKDE
