Scribd
Upload
523 views1 page

Specs Nis k25

The document provides specifications for a 2488 cc Nissan K25 engine including bore and stroke measurements, firing order, spark plug and distributor details, torque values, piston and ring dimensions, crankshaft and camshaft measurements, valve details, and contact information for TAM Quick Engine. Key specifications include a bore of 3.5039-3.5059 inches, stroke of 3.937 inches, firing order of 1-3-4-2, main journal diameter of 2.4780-2.4785 inches, and intake and exhaust valve lengths of 3.892-3.915 inches and 3.896-3.919 inches respectively.

Uploaded by

JJ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
523 views1 page

Specs Nis k25

The document provides specifications for a 2488 cc Nissan K25 engine including bore and stroke measurements, firing order, spark plug and distributor details, torque values, piston and ring dimensions, crankshaft and camshaft measurements, valve details, and contact information for TAM Quick Engine. Key specifications include a bore of 3.5039-3.5059 inches, stroke of 3.937 inches, firing order of 1-3-4-2, main journal diameter of 2.4780-2.4785 inches, and intake and exhaust valve lengths of 3.892-3.915 inches and 3.896-3.919 inches respectively.

Uploaded by

JJ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Nissan K25 Engine Specifications: This section provides detailed technical specifications of the Nissan K25 engine, including bore and stroke measurements, firing order, torque values, and component-specific information such as pistons, rings, crankshaft, and valves.

TAM QUICK ENGINE SPECIFICATION specs_nis_k25.

xlsx

Nissan K25

2488 C.C.
BORE STROKE FIRING MAIN ROD
ORDER JOURNAL JOURNAL
3.5039-3.5059" 3.937" 1-3-4-2 2.4780-2.4785" 1.7701-1.7706"
SPARK PLUG SPARK PLUG DISTRIBUTOR IGN.TIMING OIL CAPACITY
TYPE GAP GAP IDLE SPEED WITH FILTER
0° BTDC
TORQUE VALUES
LOCATION FT. LB. LOCATION FT. LB.
Main brg.caps 62-68 (with oil) Oil pan drain plug
Rod brg. caps 31-37 Oil pump bolt
Cyl. head bolts 14-17, 51, loosen, repeat Rocker arm nut
Cam sprocket bolt Rckr. shaft brckt.bolt
Crank pulley bolt Side cover bolt
Flywheel bolt 97-105 Spark plug
Flywheel housing Water outlet bolt
Manifold bolt and nut Water pump bolt
Oil pan bolt Wtr.pmp.pulley bolt
PISTON
Diameter 3.0455" Cyl.bore clearance .0010-.0017
Pin diameter .7871-.7873"
RINGS
Ring gap-Top .011-.017" Side clearance-Top
Ring gap-2nd .018-.024" Side clearance-2nd
Ring gap-Oil .008-.024"
CRANKSHAFT
Main journal dia. 2.4780-2.4785" Rod journal dia. 1.7701-1.7706"
Main run clearance .0008-.0029" Rod run clearance .0012-.0026"
End play .002-.007"
CAMSHAFT
Front journal dia. 1.7887-1.7892" End play .006-.009"
Center journal dia. 1.7282-1.7287"
Rear journal dia. 1.6228-1.6233"
VALVES
Intake length 3.892-3.915" Exhaust length 3.896-3.919"
Intake stem dia. .2744-.2750" Exhaust stem dia. .2734-.2740"
Intake head dia. 1.4961-1.5079" Exhaust head dia. 1.2598-1.2717"
Intake face angle 45.5° Exhaust face angle 45.5°
Intake clearance .0006-.0019" Exhaust clearance .0016-.0029"

________________________________________________________________

TEL: (416) 249-6686 FAX: (416) 743-2367 E-MAIL: [email protected]

You might also like