MODEL
S4000L
PEDESTAL
ROTARY GEAR PUMPS
MODEL S4000L - 1/2” NPT PORTS
RELIEF
These pumps are positive displacement devices capable of generating high line
pressure. Discharge lines should be fitted with properly sized line pressure relief valves
to protect both the pump and the system. The relief outlet should be piped back to the
suction vessel.
SUCTION LIFT
Close tolerances and positive displacement action make the rotary gear pump
capable of lifting fluid on the suction side as high as 20 feet. Though gears pumps are
self priming, a foot valve is recommended. If possible, wet the gears with liquid to be
pumped for the first dry start. Liquid retained in the system and gear chambers serves to
"wet" the pump on subsequent starts.
o
CAPACITY - WATER 70 F
R.P.M. FT.HD. 0 46 92 138 184 231 290 346
P.S.I. 0 20 40 60 80 100 125* 150*
GPM 2.30 2.00 1.75 1.55 1.30 1.10 0.85 0.65
FEATURES 400 HP 0.10 0.15 0.20 0.25 0.32 0.40 0.53 0.70
• Rugged Investment Cast Stainless Steel Housing MOTOR 1/6 1/6 1/4 1/4 1/3 1/2 1/2 3/4
GPM 3.45 3.20 2.95 2.75 2.50 2.30 2.07 2.17
• Drop-in replacement for N4000L
600 HP 0.15 0.20 0.25 0.35 0.40 0.60 0.75 0.94
• Fully "Biofood" grade MOTOR 1/4 1/4 1/4 1/3 1/2 1/3 3/4 1
• Taylored to serve Maple Syrup Filter Press applications. GPM 4.65 4.18 4.10 3.90 3.70 3.50 3.25 3.05
• Graphitized Silicon Carbide Sleeve Bearings 800 HP 0.20 0.22 0.29 0.45 0.64 0.86 1.20 1.60
• Hardened Stainless Steel Shafts MOTOR 1/4 1/4 1/3 1/2 3/4 1 1 1/2 2
GPM 5.86 5.65 5.40 5.18 4.95 4.76 4.50 4.30
• Stainless Steel Gears
1000 HP 0.22 0.25 0.30 0.45 0.65 0.75 1.20 1.50
• Viton Cover O-ring MOTOR 1/4 1/4 1/3 1/2 3/4 3/4 1 1/2 1 1/2
• Lubrication Fittings GPM 7.10 6.85 6.60 6.35 6.12 5.90 5.68 5.45
• Synthetic braided compression packing with teflon dispersion 1200 HP 0.25 0.30 0.40 0.60 0.75 0.97 1.30 1.70
MOTOR 1/4 1/3 1/2 3/4 3/4 1 1 1/2 2
GPM 9.70 9.45 9.20 8.95 8.72 8.50 8.30 8.10
GENERAL DESCRIPTION
1600 HP 0.30 0.39 0.60 0.80 1.05 1.30 1.64 2.05
Pumps are the Stainless Steel version of the Industry-Proven MOTOR 1/3 1/2 3/4 1 1 1 1/2 2 2
Bronze Pedestal Gear Pump N4000L specified by many leading GPM 10.56 10.33 10.10 9.85 9.63 9.42 9.20 9.00
maple syrup filter press equipment manufacturers. Handles abra- 1725 HP 0.50 0.75 0.90 1.20 1.50 1.75 2.00 2.32
sive sugar sand and filter aide. These versatile pumps can be MOTOR 1/2 3/4 1 1 1/2 1 1/2 2 2 3
operated in either rotating direction and can be installed in any H.P. = Actual Horsepower Motor = Convenient Fractional Size
G.P.M. = Gallons per Minute P.S.I. = Lbs. Per Square Inch Pressure
plane. All materials of construction are suitable for food service
R.P.M. = Revolutions per Min. Ft. Hd. = Equiv. Press. in Ft of Water
use. Flush new Factory Supplied pumps thoroughly before use.
*For pressures over 100 psi, the above selections are suitable for pumping fluids with lubricity
LIQUIDS AND TEMPERATURE (e.q. oils, polymers). Service life will decrease for fluids without lubricity (e.q. water, solvents).
Tailored to handle typical processing conditions including raw
sap to 220F up to 80 psi as well as 140F hot water flushing.
Regreasing is recommended to prevent sap build-up between
shaft and bearing surfaces.
www.oberdorfer-pumps.com PHONE (800) 448-1668; (315) 437-0361 FAX (315) 463-9561
MODEL
S4000L
PEDESTAL
ROTARY GEAR PUMPS
EXPLODED VIEW AND PARTS LIST
1 2* 3 4* 5* 6* 7 8 16 17 Repair
Packnut Packing Body Assy Drive Gear Assy Idle Gear Assy Oring Cover Assy Screw Dowel Pin Grease Fitting Kit *
1 Req'd 2 Req'd 2 Req'd 1 Req'd 1 Req'd 1 Req'd 1 Req'd 8 Req'd 2 Req'd 2 Req'd
S4000L 1762-01 5479 9319SD1N-1-S 33199-1 33198-1 9797-041 9322SN5N-1-S 5385 8885 5390-01 12317
* Repair kit includes these items
DIMENSIONS
3/06 Specifications are subject to change without notice.
www.oberdorfer-pumps.com PHONE (800) 448-1668; (315) 437-0361 FAX (315) 463-9561
