Greenhouse monitoring
solution
Shandong Renke Control Technology Co.,Ltd.
1.Wired monitoring system
2.Wireless monitoring system
3.Solution introduction
In view of the characteristics of greenhouses,
Jianda Renke launched the intelligent solution for
greenhouses, which consists of LED sightseeing
screens (including intelligent monitoring host),
multi-element solar radiation shield, soil
moisture/temperature/conductivity sensors, and
environmental monitoring cloud platform. It can
monitor the air temperature and humidity, soil
temperature and moisture, soil conductivity,
carbon dioxide concentration, and light intensity in
the greenhouse in real time, and upload it to the
cloud platform in real time.
At the same time, the system can also push
real-time monitoring information and alarm
information to managers through computer, mobile
phone, Pad and other information terminals to
realize greenhouse informatization and intelligent
remote management, give full play to the role of
Internet of Things technology in agricultural
production, and ensure that the greenhouse The
environment in the greenhouse is suitable for crop
growth, realizing refined management, creating
conditions for high-yield, high-quality,
high-efficiency, ecological, and safe crops, and
helping customers improve efficiency, reduce
costs, increase profits, and reduce human labor.
4.Scheme schematic diagram
5.Monitoring sensors
5.1 LED temperature humidity display board
The LED sightseeing screen contains an
intelligent monitoring host, which collects and
displays the data in the greenhouse in real time.
Data can be uploaded to the monitoring
software platform via GPRS. At the same time,
the monitoring host also has a ModBus-RTU
slave interface. It can also upload data to the
customer's monitoring software or PLC
configuration screen via 485 communication.
With 1 ModBus-RTU master station interface, it can be
connected to 485 transmitters: soil temperature and moisture,
soil EC, PH, light, CO2, nitrogen, phosphorus and potassium
transmitters.
Optional 2 relay outputs for remote manual control.
It can be connected to an outdoor LED monochrome display
with 96*48 dot matrix.
When the LED screen is not displayed, it can be used with solar
panels and accumulators for field measurement to solve power
supply problems.
The device has a unique 8-bit address, which is easy to manage
and identify, and can be used with a variety of software
platforms provided by our company.
5.2 Solar radiation shield
The multi-element solar radiation shield
integrates temperature and humidity sensors,
co2 sensors, and illuminance sensors, which
can monitor air temperature and humidity, co2
concentration and illuminance in real time and
upload them to the host. The product is small in
size, light in weight, high-quality anti-ultraviolet
material, long service life, high-sensitivity probe,
stable signal and high precision.
CO2 range: 0-5000ppm, resolution 1ppm.
Measure the environmental temperature and humidity, the
measuring unit is imported from Switzerland, the measurement
is accurate, and the range is -40~120 degrees.
The light collection module adopts a high-sensitivity
photosensitive probe, and the light intensity range is 0~200,000
Lux.
Using dedicated 485 circuit, stable communication, 10~30V
wide voltage range power supply.
The key components adopt imported components, which have
the characteristics of wide measurement range, good linearity,
good waterproof performance, convenient use, easy installation,
and long transmission distance.
5.3 Soil sensor
The soil moisture temp ec sensor can
simultaneously monitor the moisture content,
temperature and conductivity in the soil. It has
stable performance and high sensitivity. It is an
important tool for observing and studying the
occurrence, evolution, improvement and
water-salt dynamics of saline soil. By measuring
the dielectric constant of the soil, it can directly
and stably reflect the true moisture content of
various soils. It can measure the volume
percentage of soil moisture, which is a soil
moisture measurement method that meets the
current international standards.
The three parameters of soil moisture content, electrical
conductivity and temperature are combined into one.
It can also be used for the conductivity of water and fertilizer
integrated solutions, as well as other nutrient solutions and
substrates.
The electrode is made of specially treated alloy material, which
can withstand strong external impact and is not easy to
damage.
Completely sealed, resistant to acid and alkali corrosion, and
can be buried in soil or directly into water for long-term dynamic
testing.
High precision, fast response, good interchangeability, probe
plug-in design to ensure accurate measurement and reliable
performance.
6.Monitoring Cloud Platform
The environmental monitoring cloud platform is a web login platform specially developed by our
company to provide users with convenient services. The cloud platform is free to use, the interface is
completely neutral, supports multi-level permission access, and supports customers to add
sub-accounts.Customers can log in anytime and anywhere with their account to conveniently view
their own equipment status, query data records, download and print data, etc.You can also choose
SMS alarm, email alarm and other services according to your needs. The platform is stable and
reliable, and the number of connected devices exceeds 10,000.
