crimson
Precast Concrete Lintel
Installation
Effective Date:
Revision No.:
crimson
M e t h o d S t a t e m e n t |
This document is the property of Crimson Group, Inc. (CGI). This
material shall not be used or transferred to any other party for use
in any other projects, additions to the current project or for any other
purpose for which the material was not strictly intended by Crimson
Group, Inc. without expressed written permission.
SECTION TITLE
1.0 Scope of Works
2.0 Installation Procedures
3.0 Inspection Requirements
4.0 Conformance Criteria
5.0 Materials
6.0 Personnel Roles & Responsibilities
7.0 Environmental Requirements
8.0 Health & Safety
9.0 Plant & Equipment
10.0 Storage & Handling
11.0 Reference
Engineering Department | September 13, 2021 | Rev. No. 0 1
crimson
M e t h o d S t a t e m e n t |
2.0 Liaise with Project Management Team/ Architects &
Intended Application/ Usage: The Estate Makati Consultants
3.0 Monitor project progress.
Sequence of work and workmanship will be reviewed and resolved
during the co-ordination of the MEPF requirements and other trade PROJECT IN CHARGE
works, if any. 1.0 Assist the Project Manager and overall site coordination and
arrangement
2.0 Liaise with Sub-contractors.
3.0 Monitor site progress and logistics.
PREPARATION
1.0 Before commencing masonry works, all relevant approved
CAD/ ARCHITECTURAL ASSISTANT
shop drawings shall be provided incorporating block wall
1.0 Prepare Shop Drawings.
partitioning, the sizes, and locations of architectural and
2.0 Prepare As-built Plan.
electrical/ mechanical services openings.
2.0 Tops of the walls shall be covered with waterproof covering
FIELD ARCHITECT/ ENGINEER
during discontinuation of work and while resuming work, loose
1.0 Full time supervision on scope of admin workers and sub-
mortar and foreign material shall be cleaned.
contractors.
3.0 Prepare all materials and necessary equipment to be arranged
2.0 Request missing information.
properly (concrete pump, scaffolding etc.) if applicable.
3.0 Identifying conflicts in design.
4.0 Mortar shall be made on site by either portable batch mixer
using weigh batching or manual mix using volume batching.
5.0 Secure Test Certificates and Sample results from the supplier. QA/QC ARCHITECT/ENGINEER
1.0 Prepare Method Statement
2.0 Prepare Material/ Sample Submissions
INSTALLATION
3.0 Prepare documents such as:
1.0 Setting out and alignment should be inspected and approved
- Material Delivery Inspection Request
first prior proceeding to this activity.
- Commence Work Notice
2.0 Place cement mortar around the end bearing of the masonry
- Inspection Request
wall that will support the lintel.
- Hand-over and Punchlisting Report
3.0 Lift the precast lintel carefully and place it on the mortar taking
note of alignment and level.
4.0 Apply temporary support to transfer the stresses efficiently. SAFETY PERSONNEL
1.0 Prepare Safety Plan
2.0 Prepare Daily Safety Man-Hour
3.0 Prepare Weekly Toolbox Meeting
Inspection will be carried out according to agreed Sequence of
4.0 Monitor Labour Site Safety
Works and Hold Points from Project Management.
Installation works to be carried out complying with Regulations and
Installation of works to be carried out according to the approved Specifications.
shop drawings, material/samples and comply with Specification.
1.0 Aggregates Installation works to be carried out according to approved safety
2.0 Cement plan and comply with Project Manager’s project safety regulations.
3.0 Water
4.0 Precast Concrete Lintel
5.0 Polyethylene Sealant 1.0 Scaffolding
6.0 Backer Rod 2.0 Ladders
3.0 Drillbit
4.0 Laser Hilti PMC46
5.0 Screw Gun
PROJECT MANAGER
6.0 Grinder
1.0 Overall project management of whole project.
7.0 Hand tools
Engineering Department | September 13, 2021 | Rev. No. 0 2
crimson
M e t h o d S t a t e m e n t |
Storage and handling according to approved Project Manager’s
Logistics Plan.
Installation works to be carried out complying with Relevant
Standards and Specification.
Engineering Department | September 13, 2021 | Rev. No. 0 3
