Scribd
Upload
453 views1 page

Laser Cutting Materials Design Guidelines

This document compares laser cutting materials and provides design guidelines for minimum dimensions, spacing, and assembly. It lists the kerf, minimum distance between cuts, minimum dimensions, maximum dimensions, ability to assemble, and ability to cut multiple objects for various materials and thicknesses including acrylic, plywood, MDF, cardboard, and POM. Dimensions and spacing need to exceed the kerf to avoid fusing materials together during cutting.

Uploaded by

Tran Duc Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
453 views1 page

Laser Cutting Materials Design Guidelines

This document compares laser cutting materials and provides design guidelines for minimum dimensions, spacing, and assembly. It lists the kerf, minimum distance between cuts, minimum dimensions, maximum dimensions, ability to assemble, and ability to cut multiple objects for various materials and thicknesses including acrylic, plywood, MDF, cardboard, and POM. Dimensions and spacing need to exceed the kerf to avoid fusing materials together during cutting.

Uploaded by

Tran Duc Minh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

LASER CUTTING MATERIALS COMPARISON - Design Guidelines

MiNIMUM SPACE FILES WITH


MINIMUM DISTANCE MINIMUM
MATERIAL THICKNESS KERF MAXIMUM DIMENSIONS ASSEMBLY REQUIRED FOR MULTIPLE
BETWEEN CUTTING LINES DIMENSIONS
ASSEMBLY OBJECTS

1mm 0.07mm (0.12mm: clear) 1mm

3mm 0.105mm 3mm

5mm 0.17mm 5mm 15 x 15mm 940 x 590mm Yes Depends on the kerf Yes
Acrylic

8mm 0.2mm 8mm

10mm 0.215mm 10mm

2mm 0.2mm (Ceiba Wood) 2mm

0.125mm (Poplar) 940 x 590mm (Oukoumé & Poplar)


3mm 3mm
Plywood 0.115mm (Oukoumé) 15 x 15mm Yes Depends on the kerf No
800 x 585mm (Ceiba Wood)
0.135mm (Poplar)
5mm 5mm
0.125mm (Oukoumé)

2mm 0.2mm 2mm

3mm 0.08mm 3mm

MDF 6mm 0.145mm 6mm 15 x 15mm 940 x 590mm Yes Depends on the kerf No

8mm 0.19mm 8mm

10mm 0.205mm 10mm

0.7mm 1mm

1mm 1mm
780 x 580mm (Cellolose & Grey)
Cardboard 2mm 0.075mm 2mm 15 x 15mm Yes Depends on the kerf No
940 x 565mm (Corrugated)

2.8mm 3mm

6.7mm 7mm

2mm 0.07mm 2mm

POM 3mm 0.12mm 3mm 15 x 15mm 940 x 590mm Yes Depends on the kerf No

5mm 0.105mm 5mm

All Laser Cutting materials available at sculpteo.com

You might also like