We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
Pret’
Pe eee
r On Demand
per ela FFA 6000 - FFA 10000
FFA dual power dual mono professional audio amplifiers
Ideally suited for driving very high output bass and sub bass loud speakers or high power full range
systems. Designed to drive sustained, very high output audio into 2 Ohm loads.
Both feature FFA proprietry Class D PWM amplifiers. These are partnered with FFA high current switch
mode PSU technology. Massive bulk storage capacitance per channel ensures continuous high power
deliver to the load, The FFA-6000 and FFA-10000 are dual mono - each channel is totally independent.
FFA dual mono power amplifiers are mains supply power efficient and operate cool even in the most
demanding environments. Mechanical construction is tour grade with aluminium used throughout the
chassis design. This provides a robust and rigid but lightweight housing for the electronic systems.
co —
eae
+ FFA Class D PWM amplifiers + Switch mode power supply
+ Power supply soft start + Power efficient
+ High thermal headroom + 2.0hm drive
+ Weight - 12kg + All aluminium construction
+ Dual mono power amplifiers + Dual power supply
+ Clip limiter + High current Neutrik® speakON®
+ 5 year factory warranty NL4MP-UC connectors
+ Hand constructed and designed in England
WWW.FULLFATAUDIO.COM er On Demand
FFA 6000 - FFA 10000
OSHS)
= jeu
ae
Typical 0.05 4 Ohm the THON
ers
:
Power on rocker switch each channel. 40 point Potentiometer each ¢
Power ‘on’ green LED each channel, Signal present green LED, -348 drive yellow LED, amplifier clip - red signal
te LED, amplifier protect due to over temp/clip limiter activated and 3 second mute at power up = red LED
0mm variable speed high CFM fan, Rear to front air flow
Ped on output, cip timiter
scones pin
Short circuit, current overload, thermal, reactive load stability
Neutrik female XLR with male XLR signal ink through per channel
Pair of Neutrik® NLAMP-UC speakON@ connectors per channel. Each connector has all output poles live 1+, 1
2+, 2+. This allows the use of 4 core loudspeaker cable to minimise conductor losses between amplifier and
loudspeaker
2.x 20A Neutrik powerCON@ required - one each channel
220-240 VAC 50-602, 2x16A max per amplifier
185V-240VAC
2RU 19" rack mount enclosure, H8&mm x W483mm x 510mm. Depth includes integral
rear rack support ears
=
FFI has a policy of continued product improvement and accordingly reserves the right to change features and specifications without notice.
WWW.FULLFATAUDIO.COM
