0 ratings0% found this document useful (0 votes) 146 views2 pages7812
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here.
Available Formats
Download as PDF or read online on Scribd
® MOTOROLA
Three-Terminal Positive
Voltage Regulators
These voltage regulators are monolithic integrated circuits designed as
fixedvoltage regulators for a wide varity of epplcations including local,
‘on-card regulation. These regulators employ internal current limiting
thermal shutdown, and safe-area compensation. With adequate heatsinking
they can deliver output currents in excess of 1.0 A. Although designed
primarily as a fixed voltage regulator, these devices can be used with
‘external components to obtain adjustable voltages and currents.
* Output Current in Excess of 1.0
* No External Components Required
* Internal Taermal Overload Protection
* Internal Short Cireuit Current Limiting
* Output Transistor Safe—Area Compensation
Output Voltage Offered in 2% and 4% Tolerance
Available in Surface Mount D2PAK and Standard 3-Lead Transistor
Packages
Previous Commercial Temperature Range has been Extended toa
Junction Temperature Range of ~40°C to +128°C.
DEVICE TYPE/NOMINAL OUTPUT VOLTAGE
MGTBOEAG TCTET2G av
uaaoaT=5 sov uwaaor=12
Mo7s0s¢ MMGTBTSAG
Lns4or-s Lus40aT-15 bv
MCTBOEAG \orersc. .
ov
Mo7B00¢ uws4or-15
MCTaDEAG (CTaTGAC
ov wv
Mo7a08¢ iormac.
MCTBOEC o0v TACTEQEAC nv
MCTBT2AG \crarac. .
pv
ue4oaT—12
ORDERING INFORMATION
‘Output Voltage | Operating
Deviee Tolerance’ | Temperature Range | Package
MGTEXXAGT
Insertion Mount
TaAgAT OX 2%
MGTEXXACDOT ‘Surface Moun
Tye aor to #12
MGTEXXCT
Insertion Mount
TNBAOT IO 4%
MGTEXXCDAT Surface wou
Order this document by MC7800D
MC7800,
MC7800A, LM340,
LM340A Series
THREE-TERMINAL
POSITIVE FIXED
VOLTAGE REGULATORS
SEMICONDUCTOR
TECHNICAL DATA,
| sm gd |
Turk
PLASTIC PACKAGE
CASE 2218,
j
Po tlt
Heatsink sure
comectattoPn?
2 SUFFIX
PLASTIC PACKAGE
CASE 033,
(D?PaK}
Heats suze hown as eminl in
2s cutine tang} comeciedts Pa?
STANDARD APPLICATION
Input ego Mc7ExK foprome
owt E } ro
‘A common ground is requied between the
input and the output votages. The input voltage
must remain typeally 20 V above the output
vellage even during the low point on the input
riople voltage
XX, These two digs ofthe type number
indicate nominal vatage
* Cin roquiredif regulator is lated an
epprecible distance rom power supply
‘iter
* Cos nat needed for stably: however,
‘does improve wansient response, Values
ofless than 0.1 =F could cause stacy,
XxX ingicates nominal volage
1 Noor e.1907 RoveMC7800, MC7800A, LM340, LM340A Series
(MAXIMUM RATINGS (4 = 25°C, unless otherwise noted)
Rating ‘Symbol Value Unit
Input vorage (50-18) Ww 35 Vee
ayy 0
Power Dissipation
case 2218
Tan 2eC Fp | Intornay Lites
‘Thermal Resistence,Junction-to~Ambiant Raya es
“Thoimal Resistance, Juneton-o-Case Rese 50
case $36 (0PAK)
Ta =25°C Pp | Internally Limted | w
‘Thermal Resistance, Junction-to-Ambient Ros | SeeFigues3 | sow
‘Thoimal Resistance, Junction-o-Case Reva 50 sew
‘Storage Juncton Temperature Range Tog | est rs0 | o
‘Operating Junction Temperature Ty +150 ©
NOTE: ESD dala avatobe upon eRe
Representative Schematic Diagram
Twcra00
‘This device contains 22 actve transistors
MOTOROLA ANALOG IC DEVICE DATA