Mark Scheme (Results)

January 2023

Pearson Edexcel International GCSE

In Mathematics A (4MA1) Paper 1HR
Edexcel and BTEC Qualifications

Edexcel and BTEC qualifications are awarded by Pearson, the UK’s largest awarding
body. We provide a wide range of qualifications including academic, vocational,
occupational and specific programmes for employers. For further information visit
our qualifications websites at www.edexcel.com or www.btec.co.uk. Alternatively, you
can get in touch with us using the details on our contact us page at
www.edexcel.com/contactus.

Pearson: helping people progress, everywhere

Pearson aspires to be the world’s leading learning company. Our aim is to help everyone
progress in their lives through education. We believe in every kind of learning, for all kinds of
people, wherever they are in the world. We’ve been involved in education for over 150 years,
and by working across 70 countries, in 100 languages, we have built an international
reputation for our commitment to high standards and raising achievement through
innovation in education. Find out more about how we can help you and your students at:
www.pearson.com/uk

January 2023
Question Paper Log Number P72438A
Publications Code 4MA1_1HR_MS_2023
All the material in this publication is copyright
© Pearson Education Ltd 2023
General Marking Guidance

• All candidates must receive the same treatment. Examiners must

mark the first candidate in exactly the same way as they mark the
last.
• Mark schemes should be applied positively. Candidates must be
rewarded for what they have shown they can do rather than
penalised for omissions.
• Examiners should mark according to the mark scheme not according
to their perception of where the grade boundaries may lie.
• There is no ceiling on achievement. All marks on the mark scheme
should be used appropriately.
• All the marks on the mark scheme are designed to be awarded.
Examiners should always award full marks if deserved, i.e. if the
answer matches the mark scheme.
Examiners should also be prepared to award zero marks if the
candidate’s response is not worthy of credit according to the mark
scheme.
• Where some judgement is required, mark schemes will provide the
principles by which marks will be awarded and exemplification may
be limited.
• When examiners are in doubt regarding the application of the mark
scheme to a candidate’s response, the team leader must be
consulted.
• Crossed out work should be marked UNLESS the candidate has
replaced it with an alternative response.

• Types of mark
o M marks: method marks
o A marks: accuracy marks
o B marks: unconditional accuracy marks (independent of M
marks)
• Abbreviations
o cao – correct answer only
o ft – follow through
o isw – ignore subsequent working
o SC - special case
o oe – or equivalent (and appropriate)
 o dep – dependent
o indep – independent
o awrt – answer which rounds to
o eeoo – each error or omission

• No working
If no working is shown then correct answers normally score full
marks
If no working is shown then incorrect (even though nearly correct)
answers score no marks.
• With working
If there is a wrong answer indicated on the answer line always check
the working in the body of the script (and on any diagrams), and
award any marks appropriate from the mark scheme.
If it is clear from the working that the “correct” answer has been
obtained from incorrect working, award 0 marks.
If a candidate misreads a number from the question. Eg. Uses 252
instead of 255; method marks may be awarded provided the
question has not been simplified. Examiners should send any
instance of a suspected misread to review. If there is a choice of
methods shown, mark the method that leads to the answer on the
answer line; where no answer is given on the answer line, award the
lowest mark from the methods shown.
If there is no answer on the answer line then check the working for
an obvious answer.
• Ignoring subsequent work
It is appropriate to ignore subsequent work when the additional
work does not change the answer in a way that is inappropriate for
the question: eg. Incorrect cancelling of a fraction that would
otherwise be correct.
It is not appropriate to ignore subsequent work when the additional
work essentially makes the answer incorrect eg algebra.
Transcription errors occur when candidates present a correct
answer in working, and write it incorrectly on the answer line; mark
the correct answer.
• Parts of questions
Unless allowed by the mark scheme, the marks allocated to one part
of the question CANNOT be awarded to another.
International GCSE Maths
Apart from questions 6, 13, 14, 15c, 18, 24 (where the mark scheme states otherwise) the correct answer, unless clearly obtained from an
incorrect method, should be taken to imply a correct method.
1 (a) 48 < S ⩽ 54 1 B1 Allow 48 – 54 oe
(b) (33 × 4) + (39 × 14) + (45 × 18) + (51 × 19) + (57 × 5) 4 M2 M2 for at least 4 correct products
or 132 + 546 + 810 + 969 + 285 (= 2742) added (need not be evaluated) or

[lower bound products are: 120, 504, 756, 912, 270] If not M2 then award:
[upper bound products are: 144, 588, 864, 1026, 300]
M1 for consistent use of value
within interval (including end
points) for at least 4 products
which must be added

or

correct midpoints used for at least

4 products and not added

"2742" M1 dep on M1
60 Allow division by their Σf
provided addition or total under
column seen
Correct answer scores full marks (unless from obvious 45.7 A1oe 7 457
45 or
incorrect working) 10 10
(accept 46 from correct working)
Total 5 marks
2 3 M1 For area of 2 different faces (ie not
2 triangles)
0.5 × 4.8 × 3.6 (= 8.64) oe or 4.8 × 3.6 if clear intention for M1 For adding together 5 areas , at
this to be 2 triangles least 4 of which are correct
7 × 3.6 ( = 25.2)
7 × 4.8 (= 33.6) NB: (3.6 + 4.8 + 6) × 7 (= 100.8)
7 × 6 (= 42) is 3 faces
(all measurements with intention to add)
Correct answer scores full marks (unless from obvious 118 A1 118.1 or 118.08
incorrect working)
Total 3 marks

3 (x =) 3 3 B1
(y =) 6 B1
(z =) 10 B1
Total 3 marks

4 1600 × 0.16 (= 256) oe or 1 – 0.16 (= 0.84) oe 4 M1

1600 – “256” or 1600 × “0.84” (= 1344) M1
"1344" 1400 − "1344" M1
(= 0.96) or (= 0.04) or
1400 1400
"1344" 1400 − "1344"
100(= 96) or 100
1400 1400

Correct answer scores full marks (unless from 4 A1 SCB1 for 1856 seen if no other
obvious incorrect working) marks awarded
Total 4 marks
5 390 ÷ (8 ‒ 2) (= 65) or 3 M1 M2 for
8 2 8 2 390 15
− = 390 or x − x = 390 or oe
15 15 15 15 6
6 6
= 390 or x = 390 oe
15 15

“65” × (2 + 5 + 8) oe or M1 or for 975 seen

1 1 1 1 with further
= 65 or x = 65 or = 195 or x = 195 work and a
15 15 5 5
different answer
Correct answer scores full marks (unless from 975 A1 SCB1 for 52, 130, 208 or
obvious incorrect working) 390, 975, 1560 (or 2925) or
97.5, 243.75, 390 (or 731.25)
Total 3 marks
6 eg 4x + 8y = 60 or 3x + 6y = 45 3 M1 Correct method to eliminate x or y:
‒ 4x − 6y = 4 + 4x − 6y = 4 coefficients of x or y the same and
(14y = 56) (7x = 49) correct operator to eliminate
selected variable (condone any one
arithmetic error in multiplication) or
 15 − x  correctly writing x or y in terms of
eg 4 x − 6   = 4 or 4(15 − 2 y) − 6 y = 4 oe the other variable and correctly
 2 
substituting.
eg x + 2  4 = 15 or 7 + 2  y = 15 M1 dep correct method to find second
variable using their value from a
correct method to find first variable
or for repeating above method to
find second variable.
Working required x = 7, y = 4 A1 dep on M1
Total 3 marks

7 (a) 0.000 0932 1 B1

(b) 2.4 105 2 B2 If not B2, then B1 for 240 000 or
24 104 oe or 2.4 10a a ≠ 5
(c) 1.8 10121 2 B2 If not B2, then B1 for 18 10120 or
1.8 10b b ≠ 121
Total 5 marks
 8 (a) 3c 2 (6cd 2 − 7) 2 B2 fully correct or
B1 for a correct partial factorisation with at least
two terms outside the bracket ie 3c(6c d − 7c)
2 2

or c 2 (18cd 2 − 21)
or the fully correct factor outside the bracket
with two terms inside the bracket and at most
2
one mistake 3c (............)
(b) (i) eg ( y  6)( y  3) or 2 M1 or (y + a)(y + b) where ab = −18 or a + b = –3
y(y + 3) – 6(y + 3) or or
y(y – 6 ) + 3(y – 6) factorisation which expands to give 2 out of 3
correct terms
[allow use of x rather than y] ( y − 6)( y + 3) A1
(ii) 6, −3 1 B1 ft must come from their factors in (b)(i)
Total 5 marks

8(b) As we have always done, (ii) must ft from (i)

If they do nothing in (i) and then factorise and give the solutions in (ii) can we give marks retrospectively – yes, as long as nothing in (i) –
this could gain M1A1B1 (correct factorisation and correct solutions) or M1A0B1 (factorisation worthy of the method mark, but not correct and
ft solutions from incorrect factorisation) or M0A0B1 (incorrect factorisation that is worthy of no marks and then answers which ft from their
incorrect factorisation)
What do we do if they give the incorrect factorisation in (i) and then start again in (ii), showing the correct factors and give the correct
answers from their factorisation in (ii) as answers? Award M0A0 in (i) and then B1 in (ii)
What do we do if nothing is done in (i) and then we see they have used the quadratic formula and got the answers from this in (ii)? No
marks at all M0A0B0
What do we do if the student has got the correct factorisation in (i) and the correct answers in (ii) but also has the quadratic formula
shown in (ii)? We award M1A1B1 – assuming that the quadratic formula is a check
What if they factorise and solve in part (i) with nothing in (ii)
M1A1B1 if fully correct or M1A0B1(allowable factorisation) or M0A0B1 (ft from incorrect factorisation that is not allowable)
What if they factorise in (i) and give the correct answers for (ii) in (i) and then a different answer for the solution in (ii)
Award M1A1 in (i) and B0 in (ii)
What if they factorise correctly and then expand and give the original expression on the answer line – award full marks; the student knows
how to factorise and is checking and gives their check as the answer.

9 1 42  2 4 M1 A correct equation involving the

 7  h = 42 oe or (h =) (= 12) oe or height or a correct expression for
2 7
height – could be in terms of y
3.52 + h2 = y 2 or h = y 2 − 3.52 oe
7
2
1 M1 (indep) use of their height (any
y 2 =   + ("12") 2 oe or  7  " y 2 − 3.52 " = 42 oe found value that they have called
2 2 ‘height’)
2 M1 all values must come from a
7
y =   + ("12") 2 oe correct method
2
Correct answer scores full marks (unless from obvious 12.5 A1 25
incorrect working) oe eg
2
Total 4 marks
10 12  2 r 6 4 M1 A correct trig statement for the
sin 52 = oe or = oe radius
r sin 90 sin 52
use of tan must also include a
12  2 correct Pythagoras statement.
or cos(90 − 52) = oe
r
 12  2 
2

or (r 2 =)(12  2) 2 +   oe  r = 6 + 4.687... 
2 2 2

 tan 52 
r 12
or = oe
sin 38 sin104
6 M1 A correct method to find the
r= (=7.614) oe radius of the circle
sin 52
6
or r = oe use of tan must also use
cos38 Pythagoras to find an expression
 12  2 
2
for r
or (r =) (12  2) + 
2
  r = 62 + 4.687...2  oe
 tan 52   

12sin 38
or oe
sin104
(Area =)   ("7.61...") M1 the radius must come from a
2

completely correct method

Correct answer scores full marks (unless from obvious 182 A1 Accept 181 - 183
incorrect working)
Total 4 marks
11 (a) 7, 17, 32, 64, 80 1 B1 values seen in table
(b) 2 M1ft for at least 4 points plotted correctly at end
of interval or for all points plotted
consistently within each interval of the
associated frequency table (eg at 5, 15, 25,
35, 45 or 0, 10, 20, 30, 40) at the correct
height. ft their table dep on one error only
in the table
(NB: a ‘bar chart’ type graph scores zero marks) correct cf graph A1 All points plotted correctly at end of
interval (tolerance 1 small square – there is
an overlay) and joined with a curve or line
segments
accept curve that is not joined at (0, 0).
(c) Accept a single value in the range OR ft their cf 33 1 B1ft Accept a single value in range 32 – 34 or
graph ft their cf graph
(d) NB: readings are 21 - 23 and 37 - 39 (but for 2 M1ft For correct use of LQ and UQ and
this M1 these do not have to be correct if subtraction, ft from a cum freq graph
correct working is shown – eg lines or marks provided method is shown – eg a line
indicating use of CF 20 (or 20.25)and CF 60 (or horizontally to the graph from readings of CF
60.75) with an indication on the Time axis at 20 and CF 60 to meet the graph and then a
the correct points (or they can just show the vertical line to the Time axis(even if wrongly
correct readings)) read scale) or clear marks on the graph and
Time axis that correspond to the correct
readings or correct values from the Time axis
Accept a single value in the range OR ft their cf 16 A1ft Accept a single value in range 15 to 17 or ft
graph from their cumulative frequency graph
provided method is shown eg subtraction of
values that would be correct for their graph

Total 6 marks
12 4 2 M1
2−4 x = 25 or ‒4x = 5 or − x = 1 oe
5
Correct answer scores full marks (unless from obvious 5 A1 5
− oe allow eg
incorrect working) 4 −4
Total 2 marks
 eg 10 000x = 3818.18…_ 2 M1 For selecting 2 correct recurring decimals that
13 100x = 38.18… when subtracted give a whole number or
terminating decimal (37.8 or 378 or 3780 etc)
or 1000x = 381.818…_ eg 10 000x = 3818.18... and 100x = 38.1818....
10x = 3.818… or 1000x = 381.818… and 10x = 3.81818…
or 100x = 38.1818… and x = 0.381818…
or 100x = 38.1818…_ with intention to subtract.
x = 0.3818… (if recurring dots not shown then showing at
least one of the numbers to at least 5 sf)
oe • •
or 0.38 + 0.0018 and eg 100 x = 0.1818...,
10000 x = 18.1818... with intention to
subtract.
eg 10 000x – 100x = 3818.18... – 38.1818...= 3780 shown A1 21
for completion to dep on M1
3780 21 55
(9900x = 3780) and =
9900 55 (NB: this is a “use algebra to show that…”
or question, so we need to see algebra as well as
eg 1000x – 10x = 381.818... – 3.81818...= 378 seeing all the stages of working to award full
378 21 marks)
(990x = 378) and =
990 55
or
eg 100x – x = 38.1818... – 0.381818...= 37.8
37.8 21
(99x = 37.8) and =
99 55
or
eg 10 000x – 100x = 18.1818... – 0.181818...= 18
18 38  99 + 18 3780 21
and 0.38 + = = = oe
9900 9900 9900 55
Total 2 marks
14 0.515 2 M1 For either bound correct (used or
6.25 seen)
Working required 0.0824 A1 103
dep on M1 Allow
1250
Total 2 marks

15 (a) x −2 −1 −0.5 0 1 1.5 2 2 B2 (B1 for 1 or 2 correct)

y 0 3.375 2 0.875 4

(b) correct 2 B2 For correct smooth curve. (there is an overlay for

curve the curve – check the line now for (c))
If not B2, then B1 for at least 5 points plotted
correctly ft from table dep on B1 or B2 in (a)
(c) 3 3 M1
2 x3 − 6 x + 4 = −3x or x3 − 3x + 2 = − x
2
3 3
or y = − x seen (allow − x )
2 2
3 M1 a correct line that intercepts with the curve
y=− x
2
allow a correct line that intercepts with the (a correct line drawn implies M2)
curve eg of points on line (0, 0), (–1, 1.5),
(–1.5, 2.25), (–2, 3)
Answer dependent on a correct line being (x=) −1.6 A1ft accept −1.6 or −1.7 or ft their curve/line intercept
drawn dep on a correct line being drawn

NB: if y value given as well then M2 only

Total 7 marks
 16 (a) ‒0.5 1 B1 1 −1 1
oe eg − , , , ‒1/2
2 2 −2
(b) (3x − 5) y = 2 or (3 y − 5) x = 2 or 2 M1 remove denominator or get to the stage
3xy − 5 y = 2 or 3xy − 5 x = 2 oe or 2 2
3 y − 5 = or 3 x − 5 =
2 x y
2
3y − 5 = or 3 x − 5 = oe
x y
Correct answer scores full marks (unless from obvious 2 + 5x A1oe 2
incorrect working) +5
3x 2 5 x
eg + or must be in terms
3x 3 3
of x
(c) 5 ( x 2 − 4 x ) ......... or 5 ( x 2 − 4 x.........) or 5( x − 2)2 … 3 M1

5 ( x − 2 ) − ( −2 )  ........ or 5 ( x − 2 ) − ( −2 ) ........... M1
2 2 2 2 2
 4
    ( −2) 2 can be 2² or 4 or   
 3  2
or 5(x – 2)² ‒ 20 ……. or 5 ( x − 2 ) + 
2

 5
Correct answer scores full marks (unless from obvious 5 ( x − 2) + 3 A1
2

incorrect working)
Total 6 marks
Alternative mark scheme for 16c
ax2 ‒ 2abx + ab2 + c 3 M1 for multiplying out a(x ‒ b)2 + c to
obtain ax2 ‒ 2abx + ab2 + c oe
2 of: M1 for equating coefficients and making 2
2
a=5 2ab = 20 oe ab + c = 23 oe correct statements

5( x − 2) 2 + 3 A1
17 1 4.6h 5 M1 a correct equation for the area to
12 =  4.6  8.3  sin ABC or = 12 (h = 5.217....)
2 2 find angle ABC or to find the
perpendicular height of the
triangle.
  M1 A correct method to find angle
 12  ABC
ABC = sin −1 
1  (= 38.947…) oe or or
  4.6  8.3 
2  a correct method to find BM²
−1 where CMB is 90⁰
ABC = sin (0.6286) (= 38.947...) or
 "5.217..." 
ABC = sin −1   (= 38.947...) or
 8.3 
BM 2 = 8.32 − "5.217..."2

AC 2 = 4.62 + 8.32 − 2  4.6  8.3  cos("38.947") [allow cos39⁰] M1 a correct start to the cosine rule to
find length AC
or AC = 30.6(627...)
2
or a fully correct method for BM
BM = 8.32 − "5.217..."2 (=6.455…)
or AC = "30.6 ( 6...) " A1 A correct value for AC which can
be the square root of 30.6(6…)
or
5.5(3739…)

Correct answer scores full marks (unless from obvious incorrect 18.4 A1 Allow answers in range 18.4 to
working) 18.45
Total 5 marks
18 3x − x = 6 + 2 3 oe or x − x 3 = −6 − 2 3 4 M1 expanding bracket and collecting
terms. Condone one error
(allow −2 9 or − 2( 3) 2 for − 6 or 2 9 or 2( 3) 2 for 6 )
6+2 3 −6 − 2 3 A1 oe must be a correct fraction with
( x =) oe eg irrational numerator and denominator
3 −1 1− 3
(6 + 2 3) ( 3 + 1) (6 + 2 3)( 3 + 1) M1 (indep) Multiplying the numerator
( x =)  or oe or and denominator of their fraction by
( 3 − 1) ( 3 + 1) 2
3 + 1 oe or showing 2 or ‒2 as the
( 6 + 2 3 )  ( −1 − 3 ) oe or denominator and multiplying the
( −1 + 3 ) ( −1 − 3 ) numerator by 3 + 1 oe

( −6 − 2 3 )(1 + 3 ) oe or rationalising their denominator, so

(1 − 3 )(1 + 3 ) long as it is of the form p + q 3

where p and q are non zero integers

(condone missing brackets provided

meaning is clear)
Working required 6+4 3 A1 dep on M1A1M1 with no errors seen
Total 4 marks
19 (a) k 3 M1 oe (the constant term, k, can be any
P= other letter apart from a or P or y)
y2
k M1 oe
eg a = or k = 16a
42
Correct answer scores full marks (unless from obvious incorrect 16a A1 −2 42 a
working) P= oe eg P = 16ay or P = 2
y2 y
(b) 16a 16a 16a 3 M1 ft a correct formula involving the
" " = c a oe eg = c 2 a or 4a = 2 or 4a  c 2 a = 16a oe constant term (c used here) and a
4a 4a c a
or
or
ft for an expression or value of y² or
16a 16a
(when P = 4a) y 2 = or y 2 = 4 or y = (= 2) oe y given for when P = 4a
4a 4a
4 2 2 a M1 (implies previous M1) a correct
c= or c = or c = oe value, in terms of a, for the constant
a a a
term or the constant term squared –
16a  4 
allow the constant term squared eg c 2 = = 
need not be simplified
4a 2  a 
Correct answer scores full marks (unless from obvious incorrect 4a 2 A1 16a 16a 2

working) P= oe eg P = or P =
x 4x 4x
a
Total 6 marks
20 (a =) 2 2 B2 If not B2, then B1 for one correct
(b =) 135 value
Total 2 marks

21 2.2 4 M1 a correct method to find AD or AE

( AD = ) (= 6.77...) or
tan18
2.2
( EA = ) (= 7.11...)
sin18
( DB = ) ("6.77...") 2 + 62 (= 9.04...) or
M1 a correct method to find DB or EB

( EB = ) 62 + "7.11..."2 (= 9.31...) or
( EB = ) 62 + "6.77..."2 + 2.22 (= 9.31...)
2.2 M1 complete method to find one of
tan DBE = or
"9.04..." tanDBE or sinDBE or cosDBE–
2.2 2.2sin 90 NB: if using cosine, the student
sin DBE = or sin DBE = will need to have found DB and
"9.31..." "9.31..."
"9.04..." EB previously
cos DBE = or use of cosine rule
"9.31..."
Correct answer scores full marks (unless from 13.7 A1 Allow answers in range 13.59 –
obvious incorrect working) 13.8
Total 4 marks
22 (a) 2 3 2 M1
ON = b + (a − b) oe or ON = a + ( b − a ) oe
5 5
Correct answer scores full marks (unless from 2 3 A1 1
obvious incorrect working)
a+ b oe eg ( 2a + 3b ) but must be one term in a
5 5 5
and one in b
(b) 8 4 3 M1ft for one of ME , NE or MN or one of
ME = a − b
5 5
EM , EN or NM
6 3
NE = a − b (all oe but simplified) ft (dep on M1 in (a)) their expression for ON
5 5
6 7
2 1
MN = a − b for this mark only [ ME = ON + a − b
5 5 5 5
4 11
MN = ON − b, NE = −ON + a ]
5 3
8 4 M1 for two of ME , NE or MN or two of
ME = a − b
5 5
EM , EN or NM
6 3
NE = a − b (all oe but simplified) must be correct
5 5
2 1
MN = a − b
5 5
Evidence of a vector method needed shown A1 eg ME = 4  MN or
4
NE = 3  MN or ME =  NE
3
or showing they are multiples of the same
vector eg
1 3
MN = ( 2a − b) ) and NE = ( 2a − b )
5 5
Total 5 marks
23  dy  5 M1 Differentiation to obtain 2 terms
 =  16 x − 14 with at least 1 correct
 dx 
16x ‒ 14 = 10 M1 their dy/dx = 10 dep on M1
(1.5, ‒9) or x = 1.5, y = ‒9 A1 coordinates of point on curve at
which gradient is 10 – allow given
as coordinates or as x worked out
and y worked out if meaning is
clear
1 3 M1 A correct method to find the
eg y − −9 = − ( x − ) oe or
10 2 equation for line Q using (1.5, ‒9)
1
eg −9 = − 1.5 + c oe
10
Correct answer scores full marks (unless 2x + 20y + 177 = 0 A1 oe where a, b, c are integers eg
from obvious incorrect working) 10x + 100y + 885 = 0
Total 5 marks
24 (S20 =)10[2 A + 19 11] = 10170 oe (where A is the u( k −19) th term) 5 M1
 10170  M1
A= − 19  11  2 (= 404)
 10 
8 + ( P − 1)11 = "404" oe (where P is the number of terms from 20 to the M1 M2 for
end) 8 + 11 (k − 20) =”404”
"404"− 8 + 11 M1
P= (= 37)
11
Working required 56 A1 dep on M1
ALTERNATIVE METHOD
k (k − 20) 5 M1 for S k or Sk −20 or
( Sk = ) [2  8 + (k − 1)11] or ( Sk −20 = ) [2  8 + (k − 21)11] or
2 2 uk or uk −19
( uk −19 = ) 8 + 11(k − 20) or ( uk = ) 8 + 11(k − 1) (allow use of letter other than k) a and d must be substituted
correctly
k (k − 20) M1 For correct expressions for both
( Sk = ) [2  8 + (k − 1)11] and ( Sk −20 = ) [2  8 + (k − 21)11]
S k and Sk −20 or uk and uk −19
2 2
or
( uk −19 = ) 8 + 11(k − 20) and ( uk = ) 8 + 11(k − 1)
k (k − 20) M1
10170 = ["16"+ (k − 1)11] − ["16"+ (k − 21)11] oe
2 2
20
or 10170 = ([8 + 11(k − 20) + [8 + 11( k − 1)]) oe
2
11 M1 Expanding to obtain a linear
eg 10170 = 160 + [40k − 420] oe
2 equation and collecting terms in k
eg 440k = 24640 or 2240 = 40k oe
Working required 56 A1 dep on M1
Total 5 marks
Pearson Education Limited. Registered company number 872828
with its registered office at 80 Strand, London, WC2R 0RL, United Kingdom