Established 1888 Incorporsted 1899

Goodell-Pratt ComPanY
Greenfi eld, Massachusetts.

Cable Addres
Prattgood Greenfield

Rlri::8 H#
 Goodell-Pratf Company
Amateur Bench Lathe
No. 125

This 24-inch Bench Lathe, with a ?-inch swing and 12 inches

between centers, will be welcomed by a host of our customers vho have 1 D(l
insisted on ordering such a machine from us years before we had any
idea of making onc. The cut cannot fail to convey an excellent idea of
its general characteristics. It is an Amateur Bench Lathe, and while
all its construction and fitting is done with great care and reasonable
accuracy, se do not pretend that it is possible to @ke a precision
tool for the price at which we propose to sell this one. But we do know
that there are innumerable uses for Just sucb a machine as we are
bringing out.
It has a milled bed, hollow spindle, rvith 3-inch hole, and is provided
with a No. 1 l\lorse Taper; it has both screw and lever feed in tail stock,
and is furnished with the following equipment:
1 ThreeJawed Chuck. capacity 0 to ,l inch.
1 Slotted Face Plate.
1 Saw Arbor.
It is well finished with machine enamel, all steel parts polished
bright. Dimensions as followsi
Total Length, [Link].
Distance between C€nters, 12 inches.
Swing, ? inches.
Diameter of Pulley Steps,1l,2l,3l inches.
Hole in Spindle, I inch.
No Countershaft furnished with this machine.
price, each. ... . .. .1*.",.,r 920.00
Gross weight, 50 pounds. Net weight, 32 pounds.
 Goodell-Pratt Company

Polishing Head
No. 2l

I3O In the construction of this little machine, as in those of

similar style described on the following pages, it has ben our
endeavor to carry out as far'as possible the ideas of various
users of this class of tools, and the machines have been con-
structed with the view of being sold at a moderate price, and
at the same time embodying good value.
No. 21, shown above, has a Solid Iron Frante 6 inches in
height; Steel Spintlle $ inch in diameter and 8 inches long.
The Boxes are adjustable; Screws and Caps are of brass, and
it is finished in japan. The Taper Screws on each end are
carefully threadetl. The distance betq'een the flanges admits
of placing therein a wheel I inch in thickness. The pulley is
grooved ior a |-inch round belt, and is 1$ inches in diameter,
{-inch face.
Price, each. lurnsal $1'50
Weight, 3 Pounds.
Each packed in a box, 9*x71x3 inches.
 Goodell - Pratt Cornpany

Polishing Head
No.22

131
This Polishing Head, while constructed similar to the one
shown on the preceding page, is more solid, consequently heav-
ier, and will undoubtedly give better satisfaction for continued
use.
It_is slightly nore than 6 inches in height, and is fitted with
a J-inch Spindle, 10 inches in leneth. ii The Boxes are adjust-
able; Screws-and Caps are of brass.:'"The tlistance between
the flanges admits of taking in a wheel f inch thick.: The
Taper Threads upon each end are carefully cut. The diameter
of the Pullef is 2{ inches, f-inch face, and it is grooved to take
a {-inch round belt.
This will be found to be a very solid and substantial titile
Polishing Head, We recommend it for general use.

Price, each. . (x^RL) 92.b0

\\'Ieight, 4] pounds.
Eaeh packed in a box, 72x7?"x3! inches,.
 Goodell -Pratt

Polishing Head
No. 23

132

This Polishine Heatl will be found to be identical with the

No. 21, shown antl tlescribetl on page 130, except that this one
is fitterl with a Three-Jawetl Chuck, capacity 0 to $ inch'
This
desirable feature will commend itself to all users of these tools'
as their ability to do drilling ad<ts materially to their
usefulness'

Price, each. ' tuonrl $2'50

Weight, 3 Pounds.

Each packed in a box, 91x7*x3 inches'

 Goodell - [Link] Cornpan\r

Polishing Head
No, 24

133

This Polishing Head is identical with the No.22, shown

and described on page l3l, except that it is fitted with a Three-
Jawed Chuck, capacity 0 to { inch. This desirable feature will
commend itself to all users pf these tools, as their ability to
do drilling adds materially to their usefulness. This Chuck,
holding up to I inch, will at once be appreciated,

Price, each. . rrourl $4.00

Weight, 4! pounds.

Each packed in a box, 12x?tx3l inches.

 Goodell-Pratt Company

Grinding Head
No, 25

t 3il

This Grinding Head is quite similar to the Polishing Heads

described on the preceding pages; it has two sets of flanges
for wheels, however, and the Taper-Threaded-Spindle is
omitted.
The machine is a little more than 6 inches in height, and
hal a j-inch Spintlle; will take wheels { inch thick. I Boxes
are atljustable, Screws and Caps are of brass; the Pulley is
grooved for a {-inch round bel^i; flat belt { inch wide can bel
used, however, if desired.

Price, each. txuPrnl $3'50

Each machine packed in a box, 8ix71x3* inches.

Weighti.4S pounds.
 Goodell-Pratt Company

Grinding Head
No.25%

ta5

This machine is in every way identical with the No. 25,

shown and described on the preceding page, with the excep'
'rion that it has two solicl Emery Wheels, 4 inches in diameter,

$-inch face, furnished with it; these wheels are of different

gracles, ancl are suitable for generai work, sirch as would nat-
urally come within the scope of a small Bench Grinder of this
character.

Priee, each. ........1uorcnnl $5.00

Each packed in a box, 8!x7{x3l inches.

Weight, complete, 6 pounds.

 Goodell-Pratt Cornpany

Grinding Head
No' 26

136
This machine is somewhat heavier than any of the pre-
cetling styles; a good idea of its generai outline is conveyed
by the cut. r It is ? inches high' antl is equipped with a Spindle
9 inches longi the diameter of the Spindle in the bearing is *
inch, between flanges where wheel runs, * inch; it will take
wheels ! of an inch thick and 8 inches in diameter. We wouldj'
however, recommend t-heels 6 inches by $ inch for use in
connection with it, It is equipBed with patent Oil Cups, thb
nuts are finishetl and case hardened, and the whole machine is
in every way thoroughly practical for use up to its capacity'
We desire to call particular attentlon to the shape of the base,
which insures great rigiditv. Width of pulley, 1 inch'
Priee, each. '1"oosal $6'0O
Each machine packed in a box, 12$x9x7! inches'
Weight, 13 Pounds.
 Goodell -trratt Cornpany

Grinding Head
No.26l

t, 7
No Emery Wheels Furnished with this Machine

This machine is in every way identical vdth the No. 26'

shown and described on page 136, except that it is supplied
with the adtlitional equipment of adiustable and detachable
work-rests, as sholin in the cut' To show the exact position
of these very plainly,'we have shown the mdchine as it would
appear with wheels in place, but we desire to call particular
attention to [Link] that the list price, as noted, does not
include Emery Wheels.

price, each. 1"ouso1 98.00

Each machine packed in a box, 12{x9x7} inches.

Weight, 15 pounds,
 Goodell'Pratt Cornpany

Polishing Head
No. 27

134

This machine is of the same general construction as the

No. 26, shown and described on page 136; as shown in the cut,
however, it is equipped with a regular Polishing Head Spindle,
having a Taper Thread on one end and flanges on the other, in
addition to which it has a Three-Jawed Chuck, capacity 0 to I
inch.

Price,each. ..'.....turotnl $8'00

Packed one in a box, 12tx9x7] inches.

Weight, 13 pounds.
 Coodell'Pratt ComPany

Polishing Head
No. 28

t_39

This style of base will at once be appreciatpd, as it enables

the operator to greatly increase the usefulness of his machine
by atljusting any iigs or attachments he may desire for doing
his own particular class of work.
This machine is fitted with a 1-inch Spindle, and will take
a wtreel + inch bt 4 inch;s. The Pullev is 2t inches; Chuck,
Three-Jawed, capacity 0 to i inch; base is japanned'-

Price,each.-. """"tuexsn) $4'50

Packed one in a box, 13x8x4{ inches'

Weight,-8i Pounds.
 Goodell - Pra Lt Cornpany

Polishing Lathe
No. 29

r40

This Polishing Lathe, complete with Tail Stock, Tee Rest,

Face Plate, Saw Arbor, and Three-Jawed Chuck, capacity 0 to
s51 inch, admits of a large variety of polishing, grinding, and
other kindred operations not possible upon the ordinary styles
of plain Polishing Heads. The cut cannot fail to convey a
good idea of its general characteristics; it is furnished com-
plete with the attachments, as shown, the bed is milled, the
spindle is hollow, andit will be found a very useful little
machine in many places. The ted is 12 inches long, and it
swings 5 inches on centers. Width of both pulley steps, f
inch, largest step grooved for round belt.

Price, each. .. .. ...1nourul $?.50

Packed one in a box, 14rx9jx5j inches.
Weight, 18 pounds.
 Goodcll-Pratt ComPany

Polishing Lathe
No.29%

7,4L

This Polishing Lathe is provided with a Screw Tail Stock

and a taper hole in both ends of the live spindle, antl is pro'
vided with a special spintlle for carrying Buff Wheels; in every
other particular it is identical with the lathe shown and de'
scribed on page 140.
Furnished complete with Tail Stock, Tee Rest, Face Plate'
Saw Arbor, Taper Threaded Polishing Spindle, and Three-
Jawed Chuck; capacity 0 to $ inch.

Price,each. ...,'..1nomu1 $10.00

Each machine packed in a box, 12*x9x7l inches.

Gross weight, 14 pounds. Net weight, 10 pounds.

 Goodell - Pratt Companl''

Grinding Head
No. 38

L+2

This machine is of the same style as the No. 26, shown on

page 136, but is larger and heavier. It is 8 inches high, and
the Spindle is 12! inches long. The diametel [Link] Spindle
in the bearing is 1 inch; beiween flanges where the wheel
runs it is * inch; it will take whels 8 inches in diameter and
1 inch thick. The Pulley is 2 inches in diameter and l.r-inch
face,

Price. each. .t**"'r $8.00

Each machine packed in a box.

Gross weight, 26 pounds. Net weight, 21 pounds.

 Goodell - Pratt CornpanY

Grinding Head
No. 40

r43

No Emery Wheels Furnished with this Macbine

This machine is in every way identical with the No. 38,

shown and described on the preceding page, except that it is
supplied with the'additional equipment of adjustable and
detachable work-rests, as shown in the cut. To show the posi-
tion of these very plainly, we have shown the machine as it
woulcl appear with wheels in place, but u'e desire to call par-
ticular attention to the fact that the list price, as noted, does
not include Emery Wheels.
Price, each. <xorg) $10.00
Each machine packed in a box.
Gross weight,29 pounds, Net weight, 24 pounds.
 Goodell -Pratt Cornpany

Polishing Head
No. 43

lil4

This machine is of the same general construction as the

No.38 described on page 142; as shorvn in the cut, however,
it is furnished rvith a regular Polishing Head Spindle, having
a Taper Thread on one end and flanges on the other, in addition
to which it is furnished rvith a Three-Jawed Chuck; capacity
0 to $ inch.

Price, each. r"arrl $10.00

Each machine packed in a box.

Gross weight, 26 pounds. Net weight, 21 pounds,

 Goodel! -Pratt Company

Polishing Head
No. 31

14,
An Offset Polishing Head, like the one shown above, will
be found very useful about small plating plants, where often-
times it is a great convenience in polishing, scouring, or buff-
ing an irregular shaped piece which could not be handled to
advantage on an ordinary small Polishing Head.
?he Spindle is 14 inches long, I inch in diameter at the
bearings, I inch in diameter between the flanges, the bearing
is 4l inches long, provided with two dust-proof Automatic
Closing Oil Cups. The double flanged Pullev is 2l inches in
diameter, 1ii inch face.
Any buffing, grinding, s1 sgeuring wheel with t-inch hole
can be used upon this machine up to li inches in thickness.
This machine is 9 inches high, and the wheel flanges are 8
inches from the standard. The main body of the standard is
enameled, all other metal parts are polished bright.
Price,each. ........lomsul $5.00
Packed one in a box, 15lx11x7l inc-]res.
Weight, 21 pounds.
 Goodell - Pra tt Cornpanlr

Polishing Head Tail Stock

No. 42

L46
This little machine is intended for use in connection with
small Polishing 61 Qrinding Heads, thereby extending their
field of usefulness.
It has an up and down adjustment of 3 inches, and can
be set to line with spindles of Polishing or Grinding Heads
that run from 6 to 9 inches high.': The spindle is S inch in
diameter and 8 inches long, the main lever arm is 12 inches
long, and adjustable to two different throws. The hole in the
spindle is * inch, and the face plate for same can be removed,
if desired, anal other attachments inserted. The base is'4
inches square and the height as noted above. , The standard
and spindle bearings are japanned, and other metal parts are
polished.

Price, each. . 1r^r*r $4.00

Packed one in a box, 13!x6!x4$ inches,
Weight, 8| pounds.
 Goodell - Pr-att Cornpany

Countershaf t
No. 47

Diameter
Sh4r1..... ,...........,, I inch.
Ilose Pulley,..... .... ...3 inch.
Tight Pul|ey.....,.......3 incb.
lst Step..... 3l inch.
2d SteP .................41 inch.
Base Pldte, 4 inches by 8 inches.

Price, each......rrrxsrr 92.50

Weight, 11.! pounds._

Cou ntershaf t
No. 48

L47
Dimerer
Shaft..........1 inch.
Loose Pulley...3 inch.
Tight Pulley,,,3 inch.
1st Step.......3 inch.
2d Step......,.5 inch,
3d Step........6 inch,
Width Loose Pulley,
1 inch.
Base PIate,5 inches
by 9 inches.

Price, each ,,
lP^iELi
$4.00

Each Countershaft packed in a wooden box,11jx9jx9

inches-
Weight, 18 pounds,
 Goodell-Pratt ComPanY

Foot Power Polishing Machine

No. 123

This useful combina- Dimensions

tion of a Foot Power
and No.23 Polishing Height, 45 inches.
Head will prove a Diameterof Wheel
great convenience to 20 inches.
anyone desiring to in_ Motion, Plain
stall m€chanism of this Crank-
character, and have it
lree and clear of their Diamet€r of Small
work bench. The ma- Pulley, lZ ins.
chine is complete in it- Width of Small
self; it is Provided Pulley, % inch.
with a Three-Jawed
Chuck, capacity 0 to Size of Iron Table
t_48 ',,!. It is provided with 10 x 5 inches.

round belt, as shown Weight,6t pounds.

in cut. It is finished Capacity of Chuck
in machine .enamel, 0 to fi inch.
black and red. For
dimensions, see oPPo-
site side of cut'

Price, each $12.50

(D^sI'f:n)

Gross weight,
95 pounds.
Net weight, 65
pounds.
, Coodell-Pratt Cornpany

Foot Power Polishing Machine

No. 124

Dimensions This combinatbn is

identical with the one
Height, 45 inches. described on the pre
Diamete4 irf Large ceding page, *cept in
I{heel, 20 inches the Polishing Ead,
with which it is
M ot ion:Pla in equipped, this II@d be
Crank. ing our No. 24. It is
Dian€tei of Small provided with a Thr*
Pulley,2l,ins. Jawed Chuck, @pacity
of Shsll 0 ta / inch, Neessary
Width
amount of leather belt
[Link], I inch. shom in cut is fur-
Size of Iron Table nished. The bachine
10 x 5 inches. is ffnished in black ud 149
Weight, 67 pounds. red enamel. . For di-
hensions, s@ optDsit€
Capacity of Chuck
side of cut.
0 to ,C inch.

Price, each 914.00

(D^rsr)
Gmssweight,l00
pounds,
Net weight, 67
pounds,
 Goodell-Pratt ComPanY
[Link] 35
This machine
can never get on a
"dead center," it
is elwavs readv to
go aheid and-the
treadle always re-
Diameterof Wheel mains stationary
20 inch€s.
when not being
worked, while the
width ol Face. wheel continues to
1l inches. r€volve until its
momentum haa
Width of Groove, be e n expended.
The machine as
r'! lncD. shown weiEhs 65
For Round Belt. pounds, the face of
ihe wheel is turned
1( ot /g inch. up and grooved,
a;d while it cannot
be considered the
cheapest Foot
Wheel on the mar.
ket. we feel con_
6dent that it
repreBents excep-
tidnel value in Dro-
portion to its cbst.
150 Price- sch, .(FoorPo) $8.00
Picked one in a box. Weight, boxed, 80 pounds.

[Link]*"t 116

We have de-
signedthis little
machine with the
view of having a
Foot Power of
extremely mo d -
erate price. It hag
grooved face for
round belt only.
The wheel is 16X
inches indiameter.
The Det weight of
the machine is 25
pounds.

Price, each. troorsoro) $3.00

Packed one in a box.
 Goodcll-Pratt CompanY

Foot Power
No. ll7

151

The general characteristics and mechanical features em-

ployecl in -our Foot Power No. 35, particularly the fact that
there is no dead center, have proveri so'[Link] we find
it advisable to preseilt it in slightly vriri'ed form, a little more
compact as regards floor space, with a solid iron base, a more
powerful foot lever, and a leather belt pull, and at only a slight
increase in cost over the original design.,l\l It is provided with
20-inch wheel with turned face, grooved, so that it can be used
for either flat or round belt as may be desired' It is finished
in machine enamel black and red.
Price, each, ......rrootu^rl $9.00
Packecl onein a box.
Net weight, 66 pounds, Gross weight, 81 pounds.
Size 22*x19Ex8$ inches.
 Goodell-Pratt Company
Foot Power Table
No. 120

L. 2

This Power Table provides io itself a complete Foot Power equip-

ment nf wheel. Treadle. Countershaft, and Bench, and is so arranged
that elmost kind of a small machine cah be atlached to the Table
rnd ooerated"ni'
b"v oower taken from the Countershaft below. No holes
;.;iul-i; ihisidtt", this being left to the purchaser; the operation is
simple and will entail little troubla and assure his having these in just
the desired sDot.
The -.ch'ine is 39 inches high; ttle Table part is 24 inches long
and 14 inches wide: the Drivins Wheel is 20 inches in diameteri the
n.""iui"" wheel on ihe Counters'fraft is 3 inche and the Driving Wheel
gf inct'es- in diameter. All Pulleys are grooted for round belt, but faces
are turned and flat belts can be used if desired. All metal parts of the
machine are attractively painted with machine enamel. The top
of tbe Table is shellacked'
For convenience in shipping this machine is knocked down; its con'
struction, however, is suctr-thdt the assembling by the purchaser is a
small matter.
Fiici, eaCtr. . .....1werara1 920.00
Paeked knocked down, one in a wooden box.
Gross weight, 150 [Link] weight, 115 pounds'
 Goodell -Pratt Companl,'

Farley's Belt Tightener

153
A strong, powerful, quick-acting device for drawing belts
together for the purpose of lacing them. Before getting up
this contrivance, we had tried, and become disgusted with,
every Belt Clamp we could find; we wanted one that would do
its work quickly and well; they were all too slow and too weak,
and it took too long to get them into position and take them
off again.
The above contrivance eliminates all these objectionable
features, and combines in itself all desirable ones; it can be
put into place in an instant, two or three throws of the levers
at most, and you are ready for the lacing,
We guarantee them to give perfect satisfaction, and the
price brings them within the reach of every one.
Please take note of the fact that we make them in one size
only, to take belt up to and including 10 inches in width,

Price, each. ........tnnrrrnl $7.50

Packed one in a box, 29!xbxb inches.
Weight, 19 pounds.
 Goodell'Pratt Corrrpany

Bench Shear
No. 150

r54

The construction of this Shear is of-a character that can-

not'fail to commend itself to anyone having use for such a
.too!.: Sheeis of great width ian be readily cut, the shape of
the casting being designed partic-ularly with [Link] in vieu
It is proi'ided with a long Levet 25 inches in length, and has
Blades 4 inches long, opening Ik inch at the front. No work
larger than * in either round or flat should be attempted;
wirrk up to these dimensions is within the capacity of the
machine.
The iron parts are attractively finished in machine enamel,
the steel parts are polished bright'

Price, each. ".....tt'e'"or $20.00

Each machine packed in a box.
Gross weight, 46 pounds. Net rveight, 31 pounds.
 Goodell-Pratt ComPany

Bench Punching Machine

No' 140

155

This Bench Punch is strong enough and- heavy 9n93gl to

iroi, $ ot an inch thick', 4
"'niii'"n-in.r,-'i,oj;'i;;;fi;t;f "i
i*ir". itl,i" iis". We do not recommend it for any work b-y
x,lil'"l':"x;Ylt",o:.':l'"ff
'd:i#li
{:?f;":,ij?l'.r'bii.'ii"
l"t"'".'i,
fi;i'il;i"l- It'i" oiasattiaciive
follows:
design, well made and
ivell finished. Dimensions
Length of Lever, 26 inches.
Canacitv.
--i?r in soft iron or steel it will punch holes $ inch
diameter in stock ; inch thick'
Depth of Throat, 4 inches.
Price, each, with one set $-inch round dies " " ro""nr $20'00
Each machine packed in a box 26x12x6 inches'
C"o.* *"igftt, i5 pounds. Net weight' 58 pounds'
Extra Dies for round holes only, per set $2'00'