SPEC. SHEET No.
TM-50Z-5-03455/R-01
DATE November, 2010
TADANO CARGO CRANE
MODEL : TM-ZE505HS
CRANE SPECIFICATIONS
CRANE CAPACITY 3,100 kg at 3.6 m (4-part line)
BOOM Five-sectioned, fully powered partly synchronized telescoping boom
of heptagonal box construction
Retracted length --------- 3.77 m
Extended length ----------13.34 m
Extending speed --------- 9.57 m / 25 s
Elevation -------------------- Elevated by a double-acting hydraulic
cylinder
Elevating speed ---------- 1o to 78 o / 12 s
Boom point ----------------- 2 sheaves
WINCH Hydraulic motor driven Spur gear speed reduction, provided with
mechanical brake and cable follower
Single line pull ------------- 7.60 kN {775 kgf}
Single line speed --------- 76 m/min (at 4th layer)
Wire rope
Diameter x length --- 8 mm x 81 m
Breaking strength --- 43.1 kN {4.39 tf}
Construction ---------- 7 x 7 + 6 x WS(26)
Hook block ----------------- 2 sheaves
HOOK STOWING DEVICE Mechanically stowed beneath boom top portion
Specifications are subject to change without notice.
1
SPEC. SHEET No. TM-50Z-5-03455/R-01
SWING Hydraulic motor driven Worm gear speed reduction Continuous
o
360 full circle swing on ball bearing slew ring Automatic swing lock
Swing speed --------------- 2.5 min-1 {rpm}
OUTRIGGERS Manually extended sliders and hydraulically extended jacks
Integral with crane frame Power up and down
Extended width ----------- Min. 2,200 mm
Mid. 3,000 mm
Full 3,800 mm
HYDRAULICS Hydraulic pump ------------------- Single gear pump
Hydraulic motors ----------------- Axial piston type for winch
Axial piston type for swing
Control valves --------------------- Multiple control valves with integral
safety valve
Oil tank capacity ------------------ approx. 48 L
SAFETY DEVICES AML(Automatic Moment Limiter)
Load indication
Load moment ratio to rated load indication
Warning alarm
Over load limiter
WHL(Working Height Limiter)
Load indicator
Over-unwinding prevention
Terminal for emergency stop switch
Over-winding alarm
Hoisting limiter
P.T.O. indicator lamp
Hook safety latch
Hydraulic safety valves, check valves and holding valves
Level gauge
CRANE MASS Approx. 2,000 kg (includes standardized mounting parts)
NOTE : Operating speeds of the crane are guaranteed under the condition that the pump
delivery is 60 L/min.
2
SPEC. SHEET No. TM-50Z-5-03455/R-01
RATED LIFTING CAPACITIES IN KILOGRAMS
Crane Strength Rated Capacities
3.77 m / 6.21 m / 8.59m 10.97 m 13.34 m
Boom Boom Boom
Load Load Extension Load Extension
Extension width of
Radius Radius width of Radius width of
outriggers
outriggers outriggers
Full Minimum Full Full
2.5 m 4.0 m 5.0 m
3,100 3,100 2,200 1,400
and below and below and below
3.0 m 3,100 2,550 4.5 m 2,150 6.0 m 1,300
3.6 m 3,100 1,850 5.0 m 2,000 7.0 m 1,200
3.9 m 2,900 1,600 6.0 m 1,700 8.0 m 1,050
4.5 m 2,500 1,300 7.0 m 1,400 9.0 m 950
5.0 m 2,200 1,050 8.0 m 1,200 10.0 m 850
5.5 m 1,950 900 9.0 m 1,050 11.0 m 770
6.0 m 1,750 750 10.0 m 950 12.0 m 700
6.5 m 1,600 670 10.75 m 870 13.12 m 620
7.0 m 1,450 600
7.5 m 1,350 520
8.37 m 1,150 400
NOTES 1. Capacities in these tables include slings and similarly used load handling devices, and they
must be added to the mass of the load. They don’t, however, include the mass of hook
block (30kg).
2. The above numerical values of total rated loads are based on crane strength only. The total
rated loads based on stability may lower than those in the above table depending on the
loading conditions and the types of the chassis.
Empty Chassis Rated Capacities
Table A
3.77 m / 6.21 m / 8.59m 10.97 m 13.34 m
Boom Boom Boom
Load Load Extension Load Extension
Extension width of
Radius Radius width of Radius width of
outriggers
outriggers outriggers
Full Minimum Full Full
2.6 m 4.0 m 5.0 m
3,100 2,400 2,200 1,400
and below and below and below
3.4 m 3,100 1,500 4.5 m 1,900 6.0 m 1,100
3.6 m 2,900 1,350 5.0 m 1,550 7.0 m 870
3.9 m 2,500 1,150 6.0 m 1,100 8.0 m 670
4.5 m 1,900 900 7.0 m 870 9.0 m 520
5.0 m 1,600 700 8.0 m 670 10.0 m 470
5.5 m 1,350 600 9.0 m 520 11.0 m 400
6.0 m 1,100 470 10.0 m 470 12.0 m 370
6.5 m 1,020 450 10.75 m 420 13.12 m 320
7.0 m 900 370
7.5 m 800 320
8.37 m 620 220
3
SPEC. SHEET No. TM-50Z-5-03455/R-01
Table B
3.77 m / 6.21 m / 8.59m 10.97 m 13.34 m
Boom Boom Boom
Load Load Extension Load Extension
Extension width of
Radius Radius width of Radius width of
outriggers
outriggers outriggers
Full Minimum Full Full
2.3 m 4.0 m 5.0 m
3,100 3,100 2,200 1,400
and below and below and below
3.0 m 3,100 2,250 4.5 m 2,150 6.0 m 1,300
3.6 m 3,100 1,650 5.0 m 1,900 7.0 m 1,100
3.9 m 2,900 1,400 6.0 m 1,400 8.0 m 850
4.5 m 2,400 1,100 7.0 m 1,100 9.0 m 700
5.0 m 1,950 900 8.0 m 850 10.0 m 620
5.5 m 1,650 750 9.0 m 700 11.0 m 520
6.0 m 1,400 620 10.0 m 620 12.0 m 470
6.5 m 1,300 600 10.75 m 550 13.12 m 400
7.0 m 1,100 500
7.5 m 1,000 450
8.37 m 800 320
Table C
3.77 m / 6.21 m / 8.59m 10.97 m 13.34 m
Boom Boom Boom
Load Load Extension Load Extension
Extension width of
Radius Radius width of Radius width of
outriggers
outriggers outriggers
Full Minimum Full Full
2.5 m 4.0 m 5.0 m
3,100 3,100 2,200 1,400
and below and below and below
3.0 m 3,100 2,550 4.5 m 2,150 6.0 m 1,300
3.6 m 3,100 1,850 5.0 m 2,000 7.0 m 1,200
3.9 m 2,900 1,600 6.0 m 1,700 8.0 m 1,050
4.5 m 2,500 1,300 7.0 m 1,370 9.0 m 920
5.0 m 2,200 1,050 8.0 m 1,070 10.0 m 770
5.5 m 1,950 900 9.0 m 920 11.0 m 670
6.0 m 1,700 750 10.0 m 770 12.0 m 600
6.5 m 1,550 670 10.75 m 700 13.12 m 500
7.0 m 1,400 600
7.5 m 1,220 520
8.37 m 1,020 400
4
SPEC. SHEET No. TM-50Z-5-03455/R-01
Table D
3.77 m / 6.21 m / 8.59m 10.97 m 13.34 m
Boom Boom Boom
Load Load Extension Load Extension
Extension width of
Radius Radius width of Radius width of
outriggers
outriggers outriggers
Full Minimum Full Full
2.5 m 4.0 m 5.0 m
3,100 3,100 2,200 1,400
and below and below and below
3.0 m 3,100 2,550 4.5 m 2,150 6.0 m 1,300
3.6 m 3,100 1,850 5.0 m 2,000 7.0 m 1,200
3.9 m 2,900 1,600 6.0 m 1,700 8.0 m 1,050
4.5 m 2,500 1,300 7.0 m 1,400 9.0 m 950
5.0 m 2,200 1,050 8.0 m 1,200 10.0 m 850
5.5 m 1,950 900 9.0 m 1,050 11.0 m 770
6.0 m 1,750 750 10.0 m 950 12.0 m 700
6.5 m 1,600 670 10.75 m 870 13.12 m 620
7.0 m 1,450 600
7.5 m 1,350 520
8.37 m 1,150 400
NOTES : 1. Empty Chassis Rated Capacities in these tables depend on condition that crane is set
level on firm level ground.
2. Capacities in these tables include slings and similarly used load handling devices, and
they must be added to the mass of the load. They don’t , however, include the mass of
hook block (30kg).
3. For boom lengths not shown, use the rated lifting capacity of next longer boom.
4. When outriggers are extended to middle extension width, use the rated lifting capacities
for outriggers are extended to minimum extension width.
5. For boom lengths longer than 8.59m, extend outriggers to maximum.
6. 10.97m boom means mark on 4th boom section side plate is half seen.
7. Empty Chassis Rated Capacities table A, B, C and D depend on the types of chassis.
8. Empty Chassis Rated Capacities are shown for over - side areas and over - rear area.
These capacities for over - front area may lowered depending on the types of chassis.
5
SPEC. SHEET No. TM-50Z-5-03455/R-01
WORKING RANGE
NOTE: The above lifting heights and boom angles are based on a
straight (unladen) boom, and allowance should be made for
boom deflection obtained under laden conditions.
6
SPEC. SHEET No. TM-50Z-5-03455/R-01
DIMENSIONS
GENERAL DATA FOR SUITABLE TRUCKS
Gross vehicle mass (including crane mass) -------- 12,000 to 25,000 kg
P.T.O. torque ------------------------------------------------- 157 N-m{16 kgf-m} min.
P.T.O. revolution --------------------------------------------- Approx. 270 to 2,800 min-1{rpm}
Width for crane mounting --------------------------------- Approx. 750 mm min.
Frame ---------------------------------------------------------- Weight distribution and frame strength
should be calculated for each truck
Frame width range (inside to outside) ---------------- Approx. 610 to 960 mm
Frame height (ground to frame top) ------------------- Approx. 1,235 mm max.
(Height of crane mounting base can be changed
by combination of jack floats and crane bases)
