PRODUCT CATALOGUE

Manufacturers of Stainless Steel Drainage Systems & Grease Traps,

Stainless Steel Fabrication & Machining
 Floor Traps
Shower Traps
Grease Traps
Glass Traps
Floor Channels
Rodding Eyes
Cookers & Dryers
 1
CONTENTS PAGE CONTENTS PAGE

ROFO ENGINEERING COMPANY PROFILE . . . . . . . . . . . 2 SHOWER TRAPS RO 100 . . . . . . . . . . . . . . . . . . 43

• RO 100 Shower Trap . . . . . . . . . . . . . . . . . . . . . 45
FLOOR DRAINS RO 125 . . . . . . . . . . . . . . . . . . 11 • RO 100 Shower Trap with Water Proofing Flange . . . . . . . . . . 46
• RO 125V NW50 . . . . . . . . . . . . . . . . . . . . . . . 13
• RO 125H NW50 . . . . . . . . . . . . . . . . . . . . . . . 14 FLOOR CHANNELS . . . . . . . . . . . . . . . . . . . . 47
• RO 125V NW50 Funnel Type Drain . . . . . . . . . . . . . . . . 15 • ROC 250 Channel . . . . . . . . . . . . . . . . . . . . . . 49
• RO 125H NW50 Funnel Type Drain . . . . . . . . . . . . . . . . 16 • ROC 250 Technical Specification and Installation . . . . . . . . . . 50
• Rofo Strip (Slot) Channel . . . . . . . . . . . . . . . . . . . . 51
FLOOR DRAINS RO 200 . . . . . . . . . . . . . . . . . . 17
• RO 200V NW100 . . . . . . . . . . . . . . . . . . . . . . . 19 GREASE TRAPS . . . . . . . . . . . . . . . . . . . . . 53
• RO 200H NW100 . . . . . . . . . . . . . . . . . . . . . . . 20 • ROGT 500 . . . . . . . . . . . . . . . . . . . . . . . . . 55
• RO 200SV NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . . 21 • ROGT 700 . . . . . . . . . . . . . . . . . . . . . . . . . 56
• RO 200SH NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . . 22 • ROGT 1700 – 3 Compartment . . . . . . . . . . . . . . . . . . 57
• RO 200V NW100 Heavy Duty . . . . . . . . . . . . . . . . . . 23 • ROGT 1700 – Underground Installation . . . . . . . . . . . . . . 58
• RO 200H NW100 Heavy Duty . . . . . . . . . . . . . . . . . . 24 • ROGT 400 DIA . . . . . . . . . . . . . . . . . . . . . . . . 59
• RO 200V NW100 Heavy Duty with Grating . . . . . . . . . . . . . 25 • ROGT OK FOODS . . . . . . . . . . . . . . . . . . . . . . . 60
• RO 200H NW100 Heavy Duty with Grating . . . . . . . . . . . . . 26 • ROGT 2000/2 lit/sec . . . . . . . . . . . . . . . . . . . . . . 61
• RO 200JBH NW100 . . . . . . . . . . . . . . . . . . . . . . 27 • ROGT 2000/4 lit/sec . . . . . . . . . . . . . . . . . . . . . . 62
• RO 200JBSH NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . 28 • ROGT 2000/7 lit/sec . . . . . . . . . . . . . . . . . . . . . . 63
• ROGT 2000/10 lit/sec . . . . . . . . . . . . . . . . . . . . . 64
FLOOR DRAINS RO 280 . . . . . . . . . . . . . . . . . . 29 • ROGT 2000 – Underground Installation . . . . . . . . . . . . . . 65
• RO 280V NW100 . . . . . . . . . . . . . . . . . . . . . . . 31 • RO SOW (Sand / Oil / Water) SEPARATOR . . . . . . . . . . . . . 66
• RO 280H NW100 . . . . . . . . . . . . . . . . . . . . . . . 32
• RO 280SV NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . . 33 GLASS TRAP . . . . . . . . . . . . . . . . . . . . . . 67
• RO 280SH NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . . 34 • Rofo Glass Trap . . . . . . . . . . . . . . . . . . . . . . . 69
• RO 280V NW100 Heavy Duty . . . . . . . . . . . . . . . . . . 35
• RO 280H NW100 Heavy Duty . . . . . . . . . . . . . . . . . . 36 RODDING EYES . . . . . . . . . . . . . . . . . . . . . 71
• RO 280V NW100 Heavy Duty with Grating . . . . . . . . . . . . . 37 • Rodding Eye Cover Plate - Internal Bolting . . . . . . . . . . . . . 73
• RO 280H NW100 Heavy Duty with Grating . . . . . . . . . . . . . 38 • Rodding Eye Cover Plate - External Bolting . . . . . . . . . . . . . 74
• RO 280V NW100 Refuse Areas . . . . . . . . . . . . . . . . . . 39 • Rodding Eye Cover 45º . . . . . . . . . . . . . . . . . . . . 75
• RO 280H NW100 Refuse Areas . . . . . . . . . . . . . . . . . . 40 • Rodding Eye Grating Cover . . . . . . . . . . . . . . . . . . 76
• RO 280JBH NW100 . . . . . . . . . . . . . . . . . . . . . . 41
• RO 280JBSH NW100 with Side Inlets 1-4 . . . . . . . . . . . . . . 42
 2
ROFO COMPANY PROFILE CONTACT ROFO
Privately owned, Rofo Engineering has history of more than 30 years of Address: 122 Shad Road, Wadeville Ext 2
successful presence at the Southern African market.
Postal Address: PO Box 14834, Wadeville 1422
Telephone Number: +27 (0) 11 824 35 25 / 6
Well-established and specialized in designing and manufacturing
Fax Number: +27 (0) 11 824 35 27
predominately in stainless steel, Rofo attributes this success to its clear
E-mail Address: info@ rofo.co.za
business focus, responsible management, high technical capabilities and
Website: http://www.rofo.co.za
superior products and service. Facilitating this is ROFO’s well established
relationship with its suppliers, together with an intimate knowledge,
MAP
experience and understanding of stainless steel fabrication.

Rofo ‘s products are made of the highest quality stainless steel resistant to
acid corrosion and stain. All our products are made in our factory under
careful supervision of highly qualified staff.

Rofo Engineering is conveniently situated in the industrial heart of

Gauteng - Wadeville, 122 Shad Road. A recently built factory provides the
necessary setting for manufacturing up to highest technical standards for
Stainless Steel manufacturing as well as for achievement of high quality
and productivity.

Well trained and friendly staff will gladly assist you with any technical or
commercial query, fulfilling our mission: to remain focused on its core
business of designing, manufacturing and distributing - at competitive
prices - high quality products.
 3
ROFO DRAINAGE SYSTEMS Wide scope of work such as cut to size, bending, boiler making, complex
Rofo holds a dominant position in the designing, manufacturing and shape developments, pipe and pipe-work fabrication, tanks, pots, hoppers,
supplying a full range of stainless steel drainage systems. platforms, storage containers, stairways, tumblers, cat-ladder, grating,
chutes, guards, brackets, silencers, industrial structures, tables, stands etc.,
All our products are originally designed to provide full sealing concept which made Rofo adequate partner for food processing and catering industry,
insures odour-free operation, while specially designed smooth surfaces water supply and water treatment plants, mines, building industry, shop-
minimize dirt collection, ensure high flow rates and are easy to clean. fitting, stone cladding, conveyer manufacturing, etc.

Carefully designed sludge containers are easy to access and dismantle for Rofo also developed a wide range of meat processing equipment: Cookers,
cleaning and all discharge pipes are fully assessable once dismantled. Dryers, Trimming Conveyors, Mixers, Vacuum Mixers etc., for wide range of
capacities.
The inlet and outlet sizes and directions can be manufactured according to
client’s specifications.

All visible surfaces are highly polished and cover openings (where applicable)
can be designed to any shape required.

Units exposed to heavy load can be manufactured as Heavy Duty so they

can allow extreme weight such as trucks, forklifts etc.

Design of all the products is specially adapted to African conditions and

has been successfully used in a variety of applications for more than 30
years. The applications include: abattoirs, bakeries, butcheries, dairies,
meat & poultry processing industry, catering and food processing industry,
restaurants, fast food outlets, industrial buildings, supermarkets, wineries, MATERIALS
non-alcoholic beverage industries, hospitals, mortuaries, sports and leisure All Rofo products are manufactured of Stainless Steel.
grounds, gyms, etc.
Stainless Steel is clean, durable, stain and corrosion resistant and long
ROFO FABRICATION lasting material ideally suited for buildings with a design life expectancy of
Based on accumulated expertise in work with stainless steel, especially in over fifty years. All stainless steel have inherent corrosion resistance but the
the field of welding technologies, during the years Rofo has become more austenitic group have greater resistance.
and more involved in manufacturing of a wide variety of components and
structures for industry and mining, undertaking production to customer’s Rofo Stainless steel products are manufactured from high-grade austenitic
specification or developed by own project management department. stainless steel in grade AISI 304, suitable for most environments, and AISI
316 suitable for corrosive environments such as marine locations or high
chloride levels (e.g. swimming pools).
 4
FINISH • A large sludge box which retains all the coarse slurry.
Rofo products are chemically de-scaled (acid pickled) in order to enhance • Easy to dismantle for cleaning.
the natural corrosion resistance and provide a uniform matt silver finish. All • The discharge pipe is fully accessible once the drain has been dismantled.
surfaces polished and smooth for easy cleaning, minimum dirt collection • Required Flow Rate for the application.
and high flow rates. • Required Load Capacity.

Being of high quality finish Rofo products are also used where an aesthetically Floor Drains range has been developed for use in hygiene sensitive areas
pleasing appearance is of paramount importance. and/or corrosive environments. They combine advanced design, high
quality and ease of installation.
QUALITY Industrial Floor Drains are widely used for the drainage of floor areas and/
All products are manufactured to our stringent quality control procedures. or discharge appliances in:

ROFO RANGE OF STANDARD PRODUCTS Food Processing Industries Nursing Homes

Our range of standard products includes:
• Range of full flow floor drains (traps); Abattoirs Hotels
• Range of shower traps; Meat & Poultry Processing Industries Hostels
• Floor drainage channels made to any specification with S/S grating or
specially designed covers to suite any application; Butcheries Restaurants
• Strip channels; Bakeries Supermarkets
• Grating made to any specification;
• Range of grease traps; Dairy Industries Health Gyms
• Glass traps Breweries Mortuaries
IMPORTANT NOTE: For the complete range of Rofo Standard Products Wine Industries Pharmaceutical Industries
Library of 3D Models in RFA (Ravit) and DWG (Auto CAD) format are available
Beverage Industries Mining Industries
on Rofo official website: www.rofo.co.za
Commercial Kitchens Chemical Industries
ROFO FLOOR DRAINS Hospitals Wash-down areas
ROFO Floor Drains are unique Full Flow Floor Traps with the following
features: Industrial Floor Drains may be provided with filter baskets to intercept
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain discharged solids and heavy duty lids or gratings to accept fork-lift truck
resistance. loadings are suitable for concrete or wooden floors with tiled or vinyl
• A water seal to ensure odour-free operation. finishes.
• Smooth surfaces for easy cleaning, minimum dirt collection and high
flow rates.
 5
FLOOR DRAINS STANDARD PARAMETERS

Floor Drain
RO 125 RO 200 RO 280
Type

Drain Nominal
125mm 200mm 280mm
Size

Bottom Outlet Vertical / Vertical / Vertical /

Position Horizontal Horizontal Horizontal
Commercial Floor Drains are used for the drainage of floor areas and/or
discharge appliances in: Bottom Outlet
• Showers NW 50 (mm) NW 100 (mm) NW 100 (mm)
Nominal Size
• Disabled persons showers
• Toilets
• Changing rooms Extension for 1, 2, 3 & 4 1, 2, 3 & 4
N/A
• Wash-down areas (e.g. food production) Side Inlets Side Inlets Side Inlets
• Laboratories
• Balconies Top Flange
Round / Square Round / Square Round / Square
• The Wet Bathroom Concept Type

The range of Commercial Floor Drains is suitable for concrete or wooden

Top Cover Plate Circular / Slots / Circular / Slots /
floors with tiled or vinyl finishes. Slots / Holes
Type Holes Holes
Typical applications:
• RO 280: General Food Processing, Wine, Beverage, Dairy, Packaging etc.
Flow Rate 0.8 l/sec 3 l/sec 4.5 l/sec
industries
• RO 280 S: Same as RO280 but wherever there is a need to connect sinks
directly to the floor trap under the ground.
• RO 200: Restaurants, Steakhouses, Kitchens, Dining Halls, Horse Stables, Load Capacity 400 kg 1 000 kg 1 500 kg
Pigsties, Nursing homes, etc.
• RO 200 S: Same as RO 200 but wherever there is a need to connect sinks
directly to the floor trap under the ground. Odour Free Single Water Double Water Double Water
• RO 125: Public toilets, Office Blocks Kitchenettes, Laundries etc. Operation Seal Seal Seal Seal
6
TOP FLANGE TYPE TOP FLANGE TYPE

SQUARE FLANGE ROUND FLANGE

for Tiled Floors for Epoxy Floors

4 SIDE INLETS 3 SIDE INLETS

TOP COVER PLATE TYPE

Continuous Independent
Holes
Circilar Aperture Slots

2 SIDE INLETS 1 SIDE INLET

Note: Top cover Plate can be manufactured with any opening if requested. Note: Position of the side Inlets can be manufactured for any position if required.
 7
ROFO FLOOR DRAINAGE CHANNELS ROFO STRIP CHANNELS
Floor drainage channels are required wherever surface liquids have to be Strip channels have same or similar use as Drain Channels, with the
drained from the wide area of floor and especially at the Wash-down areas difference that top (surface) opening is much smaller which makes them
(e.g. food production and kitchens). more suitable for industrial use as they do not obstruct internal transport.
They are also very convenient for use at public places (toilets, health gyms,
Standard Channels are designed with the bottom slope of 1/100 and do not swimming pools, hospitals etc.).
require slope of the floor for draining. In combination with the appropriate
floor drains at the channel outlet full drainage effect is achieved. Position of
the outlet can be central or side depending on the channel layout.

Standard Drainage Channels are supplied with Standard ROFO Stainless

Steel Grating cover, but they can also be supplied with any other type of
cover for special applications. However, regardless of type of cover used
they are all designed to be durable enough to carry normal traffic.

On request channels can be also equipped with mesh trays to prevent solid
particulars to get into a channel. This is recommended especially if floor
drains are not implemented.

Drainage channels are easy to clean and fully visible inside, which makes
them easy for maintenance.

Drainage Channels are manufactured to any layout.

ROFO GREASE TRAPS

Process Description
Grease Traps separate low viscosity mineral liquids (oil and fat) that are not
soluble in water. Need to separate these substances is to prevent them from
entering the drainage system where they cause serious blockages.

Furthermore these substances once allowed to enter the natural soil

drainage system, are endangering ecological system. Also oil floating on
the top of the wastewater prevents the correct operation of the sewage
treatment plants.
 8
Grease trap method of operation relies on the principle that the density of In order to prevent these mechanical components to enter the sewerage
the liquids are different, keeping fat and oil on the top of the water. systems and block them, Grease Traps incorporate the mechanical drainage
components that keep all the mechanical parts bigger than the design size,
Special design and position of the baffle plates inside the trap provides stay inside the G/T.
draining from the bottom, keeping unwanted substances on the top of the
drain. Therefore, in order to keep G/T functioning as per designed standards, it
is required to perform regular maintenance, based on the following main
Some bigger models are equipped with the valves on the level of grease activities:
accumulation in order to discharge it from the trap without empting the • Empty the accumulated sediments
system. • Empty the accumulated oil and grease
• Keep feed and discharge connections and pipe lines at the design
Grease traps are equipped with the strainer, which collects larger solids flow rate
or garbage in order to prevent blockage of outlet pipes and gullies. These • Keep the Perforated drainage parts of the Grease Trap at the design
strainers are manufactured with different sizes of outlet holes depending flow rate
on use.
It Is impossible to create a universal timing schedule for the maintenance of
The Grease Traps are installed into a waste water line before gullies and Grease Traps, because it depends of their usage. User has to follow up and
they can be positioned inside or preferable outside the room allowing establish such timing based on the realistic working conditions.
thoroughly cleaning and eliminating smell and mess associated with that.
However the main rule is not to allow Grease Traps to get blocked, so their
Standard range of the ROFO Grease traps is designed to cover all main function is not prevented.
requirements of the standard applications.
Maintenance Procedures
Regular Maintenance Principals The following basic steps are to be performed during the cleaning process
As explained in the Process Description and Method of Operation, the main of the Grease Trap:
use of the Grease Traps is to separate OIL & FAT from the water or any other • Remove the fastening Star Bolts from the G/T Lid (where applicable);
working liquid. • Lift the G/T Lid, and turn it around so the top face of the lid is facing the
floor, in order to prevent dripping;
From that point of view, the ideal working media would be-just a mechanical • Wash and clean the G/T Lid Inside and outside;
mixture of such components. • Remove G/T Basket (Baskets) and empty them into adequate waste bin;
• Clean the G/T Baskets of all the sediments, inside and outside;
Unfortunately, in reality in the working conditions where the Grease
Traps are used, the working media incorporates many other components • IMPORTANT NOTE: Collected waste and sediments MUST NOT be
including mechanical particles of the organic and non-organic source. washed in to the sewerage or any other drainage system, but it must
be sent to the proper deposition yard.
 9
• Wash all the G/T Baskets, making sure that perforated draining areas are Selection of Grease Traps
clean and that holes are not blocked; The following procedure is recommended for sizing grease traps to suit
• Clean the G/T Tank of all the sediments. Make sure that discharge and requirements of specific fixtures.
feed pipe connections are also cleaned and that they have free flow;
• Wash the G/T tank inside and outside;
Determine cubic content of fixture
• IMPORTANT NOTE: Where applicable open all the valves (Discharge, 1.2 x 0.6 x 0.3 = 0.216 m3
(Length x Width x Depth)
Overflow etc.) and wash them thoroughly.

• Inspect G/T Tank and Baskets for cracks and damages and repair if Determine actual drainage load
necessary in order to prevent leaking; (The fixture is normally filled to 1000 x 0.75 x 0.216 m3 = 162 lit
• Place the G/T baskets in to the G/T tank, making sure that they are ±75% of capacity)
properly positioned at the basket seats;
• Put the G/T Lid on to the G/T Tank and fasten the Star Bolts (Where Select the drainage period - actual time
applicable) required to completely drain the fixture 1 Min = 60 sec
Recommended: 1 Min 2 Min = 120 sec
Standard Rofo Grease Traps Acceptable: 2 Min
Grease Trap Model Nominal Flow Rate
ROGT 500 1.5 lit/sec 1 Min: 162/60 = 2.7 lit/sec
Calculate Flow Rate
ROGT 700 4.5 lit/sec 2 Min: 162/120 = 1.35 lit/sec

ROGT 400 4.5 lit/sec

Select Grease Trap which corresponds
ROGT 1700 - 3 Compartment 4.5 lit/sec
to the calculated flow rate 1 Min: ROGT 700
ROGT 2000/2 2.0 lit/sec Note: Select next larger size when flow 2 Min: ROGT 500
rate falls between two sizes listed
ROGT 2000/ 4 4.0 lit/sec
ROGT 2000/7 7.0 lit/sec
ROGT 2000/10 10.0 lit/sec
10

All information and recommendations contained in this publication are to the best of our knowledge correct.
Since conditions of use are beyond our control, users must satisfy themselves that products are suitable for
the intended processes and uses.

No warranty is given or implied in respect of information or recommendations or that any use of products will
not infringe rights belonging to other parties. In any event or occurrence our liability is limited to our invoice
value of the goods delivered by us to you. We reserve the right to change product design and properties
without notice.
 11

FLOOR DRAINS RO 125

• RO 125V NW50
• RO 125H NW50
• RO 125V NW50 Funnel Type Drain
• RO 125H NW50 Funnel Type Drain
12

FLOOR DRAINS RO 125 RANGE

 13
RO 125V NW50

SLOTS HOLES
RO 125V NW5O
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Slots / Holes - as requested
• Flow Rate 0.8l/sec
SLOTS HOLES • Load Capacity 400 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Public toilets, Office Blocks Kitchenettes, Laundries etc.

NOTE: Floor finish to be specified.

ROUND FLANGE FOR EPOXY FLOORS

14
RO 125H NW50

RO 125H NW5O
SLOTS HOLES Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Slots / Holes - as requested
• Flow Rate 0.8l/sec
SLOTS HOLES • Load Capacity 400 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Public toilets, Office Blocks Kitchenettes, Laundries etc.

NOTE: Floor finish to be specified

ROUND FLANGE FOR EPOXY FLOORS

 15
RO 125V NW50
FUNNEL TYPE DRAIN

SLOTS HOLES
RO 125V NW5O Funnel Type Drain
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Slots / Holes - as requested
• Flow Rate 0.8l/sec
SLOTS HOLES • Load Capacity 400 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Wherever there is a need to discharge directly in to the
drain above the floor level - Kitchenettes, Laundries etc.

NOTE: Floor finish to be specified

ROUND FLANGE FOR EPOXY FLOORS
16
RO 125H NW50
FUNNEL TYPE DRAIN

SLOTS HOLES RO 125H NW5O Funnel Type Drain

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Slots / Holes - as requested
• Flow Rate 0.8l/sec
SLOTS HOLES • Load Capacity 400 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Wherever there is a need to discharge directly in to the
drain above the floor level - Kitchenettes, Laundries etc.

NOTE: Floor finish to be specified

ROUND FLANGE FOR EPOXY FLOORS
 17

FLOOR DRAINS RO 200

• RO 200V NW100
• RO 200H NW100
• RO 200SV NW100 with Side Inlets 1-4
• RO 200SH NW100 with Side Inlets 1-4
• RO 200V NW100 Heavy Duty
• RO 200H NW100 Heavy Duty
• RO 200V NW100 Heavy Duty with Grating
• RO 200H NW100 Heavy Duty with Grating
• RO 200JBH NW100
• RO 200JBSH NW100 with Side Inlets 1-4
18

FLOOR DRAINS RO 200 RANGE

 19
RO 200V NW100

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR RO 200V NW100

SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Flow Rate 3l/sec
SLOTS HOLES APERTURE
• Load Capacity 1 000 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Restaurants, Steakhouses, Kitchens, Dining Halls,
Horse Stables, Pigsties, Nursing homes etc.

ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.

20
RO 200H NW100

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR RO 200H NW100

SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Flow Rate 3l/sec
SLOTS HOLES APERTURE
• Load Capacity 1 000 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Restaurants, Steakhouses, Kitchens, Dining Halls,
Horse Stables, Pigsties, Nursing homes etc.

ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.

 21
RO 200SV NW100
WITH SIDE INLETS 1-4

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR
RO 200SV NW100 with Side Inlets 1-4
SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Extension for side inlets: 1, 2, 3 or 4 inlets
SLOTS HOLES APERTURE • Flow Rate 3l/sec
• Load Capacity 1000 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need to connect sinks directly to
the floor trap under the ground - Restaurants, Steakhouses, Kitchens, Dining Halls,
Nursing homes etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
22
RO 200SH NW100
WITH SIDE INLETS 1-4

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR
RO 200SH NW100 with Side Inlets 1-4
SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry .
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Extension for side inlets: 1, 2, 3 or 4 inlets
SLOTS HOLES APERTURE • Flow Rate 3l/sec
• Load Capacity 1 000 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need to connect sinks directly to
the floor trap under the ground - Restaurants, Steakhouses, Kitchens, Dining Halls,
Nursing homes etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
 23
RO 200V NW100
HEAVY DUTY

PERFORATED
OUTLET CAP
(OPTIONAL)

RO 200V NW100 Heavy Duty

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
FISH-TAIL LUG
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
HOLES • Top Cover Plate Type: Holes
HOLES
• Flow Rate 3l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
SQUARE FLANGE ROUND FLANGE
NOTE: Floor finish to be specified.
FOR TILES FLOORS FOR EPOXY FLOORS
24
RO 200H NW100
HEAVY DUTY

PERFORATED
OUTLET CAP
(OPTIONAL)

RO 200H NW100 Heavy Duty

Unique Full Flow Floor Trap with the following features:
FISH-TAIL LUG
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
HOLES HOLES • Top Cover Plate Type: Holes
• Flow Rate 3l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
SQUARE FLANGE ROUND FLANGE
NOTE: Floor finish to be specified.
FOR TILES FLOORS FOR EPOXY FLOORS
 25
RO 200V NW100
HEAVY DUTY WITH GRATING

PERFORATED
OUTLET CAP
(OPTIONAL)

FISH-TAIL LUG
RO 200V NW100 Heavy Duty with Grating
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frame Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 3l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
26
RO 200H NW100
HEAVY DUTY WITH GRATING

PERFORATED
OUTLET CAP
(OPTIONAL)
FISH-TAIL LUG
RO 200H NW100 Heavy Duty with Grating
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frame Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 3l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
 27
RO 200JBH NW100

CIRCULAR RO 200JBH NW100

SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Flow Rate 3l/sec
SLOTS HOLES APERTURE
• Load Capacity 1000 kg
• Outlet position Side Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Restaurants, Steakhouses, Kitchens, Dining Halls, Nursing
homes etc.

ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.

28
RO 200JBSH NW100
WITH SIDE INLETS 1-4

CIRCULAR RO 200JBSH NW100 with Side Inlets 1-4

SLOTS HOLES APERTURE Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR • Extension for side inlets: 1, 2, 3 or 4 inlets
SLOTS HOLES APERTURE • Flow Rate 3l/sec
• Load Capacity 1000 kg
• Outlet position Side Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need to connect sinks directly to
the floor trap under the ground - Restaurants, Steakhouses, Kitchens, Dining Halls,
Nursing homes etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
 29

FLOOR DRAINS RO 280

• RO 280V NW100
• RO 280H NW100
• RO 280SV NW100 with Side Inlets 1-4
• RO 280SH NW100 with Side Inlets 1-4
• RO 280V NW100 Heavy Duty
• RO 280H NW100 Heavy Duty
• RO 280V NW100 Heavy Duty with Grating
• RO 280H NW100 Heavy Duty with Grating
• RO 280V NW100 Refuse Areas
• RO 280H NW100 Refuse Areas
• RO 280JBH NW100
• RO 280JBSH NW100 with Side Inlets 1-4
30

FLOOR DRAINS RO 280 RANGE

 31
RO 280V NW100

PERFORATED
OUTLET CAP
(OPTIONAL)

SLOTS HOLES
CIRCULAR
APERTURE
RO 280V NW100
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
CIRCULAR • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
SLOTS HOLES APERTURE • Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: General Food Processing, Wine, Beverage, Dairy, Packaging
etc. industries.

NOTE: Floor finish to be specified.

ROUND FLANGE FOR EPOXY FLOORS
32
RO 280H NW100

PERFORATED
OUTLET CAP
(OPTIONAL)

SLOTS HOLES
CIRCULAR
APERTURE
RO 280H NW100
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation .
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates .
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
CIRCULAR • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
SLOTS HOLES APERTURE • Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: General Food Processing, Wine, Beverage, Dairy, Packaging
etc. industries.

NOTE: Floor finish to be specified.

ROUND FLANGE FOR EPOXY FLOORS
 33
RO 280SV NW100
WITH SIDE INLETS 1-4

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR
SLOTS HOLES APERTURE RO 280SV NW100 with Side Inlets 1-4
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR
SLOTS HOLES APERTURE • Extension for side inlets: 1, 2, 3 or 4 inlets
• Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need to connect sinks directly to the
floor trap under the ground - General Food Processing, Restaurants, Steak Houses,
Kitchens, Dining Halls etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
34
RO 280SH NW100
WITH SIDE INLETS 1-4

PERFORATED
OUTLET CAP
(OPTIONAL)

CIRCULAR
SLOTS HOLES APERTURE RO 280SH NW100 with Side Inlets 1-4
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
CIRCULAR
SLOTS HOLES APERTURE • Extension for side inlets: 1, 2, 3 or 4 inlets
• Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS:Wherever there is a need to connect sinks directly to the
floor trap under the ground - General Food Processing, Restaurants, Steak Houses,
Kitchens, Dining Halls etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
 35
RO 280V NW100
HEAVY DUTY

PERFORATED
OUTLET CAP
(OPTIONAL)

FISH-TAIL LUG RO 280V NW100 Heavy Duty

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
HOLES HOLES • The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Holes
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
SQUARE FLANGE ROUND FLANGE NOTE: Floor finish to be specified.
FOR TILES FLOORS FOR EPOXY FLOORS
36
RO 280H NW100
HEAVY DUTY

PERFORATED
OUTLET CAP
(OPTIONAL)
FISH-TAIL LUG
RO 280H NW100 Heavy Duty
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
HOLES HOLES • The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Holes
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS:Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
SQUARE FLANGE ROUND FLANGE NOTE: Floor finish to be specified.
FOR TILES FLOORS FOR EPOXY FLOORS
 37
RO 280V NW100
HEAVY DUTY WITH GRATING

PERFORATED
OUTLET CAP
(OPTIONAL)
FISH-TAIL LUG
RO 280V NW100 Heavy Duty with Grating
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain
• resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frame Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS:Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
38
RO 280H NW100
HEAVY DUTY WITH GRATING

PERFORATED
OUTLET CAP
FISH-TAIL LUG (OPTIONAL)

RO 280H NW100 Heavy Duty with Grating

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frame Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need for Higher Load Capacity -
General Food Processing, Wine, Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
 39
RO 280V NW100
FOR REFUSE AREA
REMOVABLE
GRATING

REMOVABLE S/S
SIEVE TRAY
FISH-TAIL LUG
RO 280V NW100 for Refuse Area
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frome Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Vertical
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: REFUSE AREAS in General Food Processing, Wine,
Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
40
RO 280H NW100
FOR REFUSE AREA
REMOVABLE
GRATING

REMOVABLE S/S
SIEVE TRAY
FISH-TAIL LUG
RO 280H NW100 for Refuse Area
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A double water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Grating Frame Type: Square
• Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
• Flow Rate 4.5l/sec
• Load Capacity 2500 kg
• Outlet position Bottom Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: REFUSE AREAS in General Food Processing, Wine,
Beverage, Dairy, Packaging etc. industries
NOTE: Floor finish to be specified.
SQUARE FLANGE FOR TILES FLOORS
 41
RO 280JBH NW100

SLOTS HOLES
CIRCULAR
APERTURE
RO 280JBH NW100
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
CIRCULAR • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
SLOTS HOLES APERTURE • Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Side Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: General Food Processing, Wine, Beverage, Dairy, Packaging
etc. industries, Hotels, Shopping Malls etc.

ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.

42
RO 280JBSH NW100
WITH SIDE INLETS 1-4

CIRCULAR
SLOTS HOLES APERTURE
RO 280JBSH NW100 with Side Inlets 1-4
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A large sludge box which retains all the coarse slurry.
• Easy to dismantle.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
CIRCULAR • Top Cover Plate Type: Circular aperture / Slots / Holes - as requested
SLOTS HOLES APERTURE • Extension for side inlets: 1, 2, 3 or 4 inlets
• Flow Rate 4.5l/sec
• Load Capacity 1500 kg
• Outlet position Side Horizontal
• Outlet pipe Outside Diameter 104mm / 110mm as requested
TYPICAL APPLICATIONS: Wherever there is a need to connect sinks directly to the
floor trap under the ground - General Food Processing, Restaurants, Steak Houses,
Kitchens, Dining Halls etc.
ROUND FLANGE FOR EPOXY FLOORS NOTE: Floor finish to be specified.
 43

SHOWER TRAPS RO 100

• RO 100 Shower Trap
• RO 100 Shower Trap with Water Proofing Flange
44

RO 100 SHOWER TRAP RANGE

 45
RO 100

SLOTS HOLES
RO 100 Shower Trap
Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
• Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
SQUARE FLANGE FOR TILES FLOORS • Top Cover Plate Type: Slots / Holes - as requested
• Flow Rate 0.8l/sec
SLOTS HOLES • Load Capacity 400 kg
• Outlet position Side 45º
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Private and Public Bathrooms, Restrooms, Hotels,
Hospitals etc.

NOTE: Floor finish to be specified.

ROUND FLANGE FOR EPOXY FLOORS
46
RO 100
WITH WATER PROOFING FLANGE
WATER PROOFING
FLANGE

WATER PROOFING
FLANGE

SLOTS HOLES

RO 100 Shower Trap with Water Proofing Flange

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• A single water seal to ensure odour-free operation.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• The discharge pipe is fully accessible once the drain has been dismantled.
SQUARE FLANGE FOR TILES FLOORS • Top Flange Type: Round (For Epoxy Floors) or Square (For Tiled Floors)
• Top Cover Plate Type: Slots / Holes - as requested
SLOTS HOLES
• Water Proofing Flange Type: Round or Square
• Flow Rate 0.8l/sec
• Load Capacity 400 kg
• Outlet position Side 45º
• Outlet pipe Outside Diameter 50.8mm
TYPICAL APPLICATIONS: Private and Public Bathrooms, Restrooms, Hotels,
Hospitals etc.
NOTE: Floor finish to be specified.
ROUND FLANGE FOR EPOXY FLOORS
 47

FLOOR CHANNELS ROC 250

• ROC 250 Channel
• ROC 250 Technical Specification & Installation
• Rofo Strip (Slot) Channel
48

ROC 250 FLOOR CHANNEL RANGE

 49
ROC 250

CENTER OUTLET SIDE OUTLET

SECTION

RO200V NW100
RO200V NW100
RO200V NW100

FLANGE END

ROC 250 Floor Channel

Used in the following industries: food processing
plants, beverage, beer, wine, dairy plants, kitchens,
hospitals, hotels, restaurants, chemical plants, mines,
STRAIGHT T - SHAPE L - SHAPE U - SHAPE
etc.
SHAPE
50
ROC 250
TECNICAL SPECIFICATION & INSTALLATION
DRAINAGE CHANNELS
• Drainage channels are required wherever surface liquids have to be drained from the wide
area of floor and especially at the Wash-down areas (e.g. food production and kitchens).
• Standard Channels are designed with the bottom slope of 1% and do not require slope
of the floor for draining. In combination with the appropriate floor drains at the channel
outlet full drainage effect is achieved. Position of the outlet can be central or side
depending on the channel layout.
• Standard Drainage Channels are supplied with Standard ROFO Stainless Steel Grating
cover, but they can also be supplied with any other type of cover for special applications.
However, regardless of type of cover used they are all designed to be durable enough to
carry normal traffic.
• On request channels can be also equipped with mesh trays to prevent solid particulars to
get into a channel. This especially if floor drains are not implemented.
• Drainage channels are easy to clean and fully visible inside, which makes them easy for
maintenance.
• Drainage Channels are manufactured to any layout from Stainless Steel to ensure acid
SEALANT corrosion and stain resistance.
• Surfaces are smooth for easy cleaning, minimum dirt collection and high flow rates.

INSTALLATION GUIDE:
1. If the channel is installed in a recess, the recess should be min 1 00 mm wider and 50
mm deeper than the channels outer dimensions. Take to the account of anchor lugs or
FILLING leveling bolts for correct height adjustment and placement in the concrete.
2. lnfill underside of the edge profile.
3. Cast around the channel with concrete ensuring the channel is properly supported to
prevent deformation.
4. Seal the interface between the channel and the floor finish with a suitable joint sealant.
 51
ROFO STRIP (SLOT) CHANNEL

ROFO STRIP (SLOT) CHANNELS

Strip channels have same or similar use as Drain Channels, with the difference that
top (surface) opening is much smaller which makes them more suitable for industrial
use as they do not obstruct internal transport. They are also very convenient for use
at public places (toilets, health gyms, swimming pools, hospitals etc.).

RO280V NW100 PERFORATED BASKET APPLICATION AREA:

Beverage production, Meat processing, Chemical plants, Bakeries, Dairies.
52
 53

GREASE TRAPS ROGT

• ROGT 500
• ROGT 700
• ROGT 1700 - 3 Compartment
• ROGT 1700 - Underground Installation
• ROGT 400 DIA
• ROGT OK FOODS
• ROGT 2000 / 2 lit/sec
• ROGT 2000 / 4 lit/sec
• ROGT 2000 / 7 lit/sec
• ROGT 2000 / 10 lit/sec
• ROGT 2000 - Underground Installation
• RO SOW (Sand / Oil / Water) SEPARATOR
54

ROGT GREASE TRAPS RANGE

 55
ROGT 500

ROGT 500 Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates
• Single phase separation
• A large solid strainer basket with draining slots
• Easy to remove cover and basket;
• The discharge pipe is fully accessible once the inspection cover has been
dismantled;
• Flow Rate: 1.5l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 500x400x300
• Inlet /Outlet 50mm
TYPICAL USES: Coffee Shops, Restaurants, Super Markets, Fast Food Outlets

NOTE: Trap can be built into floor under the sink or can be free standing next to sink
if space is available
56
ROGT 700

ROGT 700 Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Double phase separation
• Two large strainer baskets with draining slots
• Easy to remove cover and baskets for cleaning;
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 4.5l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 700x400x400
• Inlet/Outlet 50 or 100mm / 110mm
TYPICAL USES: Restaurants, Steak Houses, Commercial Kitchens, Butcheries, Bakeries,
Super Markets

NOTE: Trap can be built into floor under the sink or can be free standing next to sink
if space is available
 57
ROGT 1700
3 COMPARTMENT

ROGT 1700 Three Compartment Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Triple phase separation
• Three large strainer baskets with draining slots
• Size, number and position of slots is accommodating primary, secondary and
tertiary separation
• Easy to remove cover and baskets for cleaning;
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 4.5l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 1725x 775x400
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Hotels, Hospitals, Food Factories, Catering Industry, Commercial
& Industrial Kitchens
58
ROGT 1700
3 COMPARTMENT UNDERGROUND INSTALLATION
 59
ROGT 400 DIA

ROGT 400 DIA Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Single phase separation
• A large solid strainer basket with wide bottom draining cutout covered with the
fine perforated plate Dia 3mm
• Easy to remove cover and basket for cleaning;
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 4.5l/sec
• Material Stainless Steel 304
• Size (Dia)x(H) = 400x1250 (adjustable)
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Hospitals, Meat & Poultry Processing Plants, Hotels, Food Factories
60
ROGT OK FOODS

ROGT OK Foods
Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates
• Single phase separation
• A large solid strainer basket with draining slots
• Easy to remove cover and basket;
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 1.5l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 400x400x400
• Inlet /Outlet 50mm
TYPICAL USES: Small Food Outlets

NOTES: Trap can be built into floor under the sink or can be free standing next to sink
if space is available.
 61
ROGT 2000 / 2 lit/sec

ROGT 2000 / 2 lit/sec Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Separated Strainer and Grease trap
• Two large strainer baskets with draining slots
• Three separate hinged covers
• Easy to remove covers and baskets for cleaning
• Two stage grease extraction with fat take off valve
• Built in Suction valve for empting the grease trap
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 2l/ sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 1600x 750x900
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Prisons, Hotels, Hospitals, Food Industry, Catering Industry,
Commercial and Industrial Kitchens
62
ROGT 2000 / 4 lit/sec

ROGT 2000 / 4 lit/sec Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Separated Strainer and Grease trap
• Two large strainer baskets with draining slots
• Four separate hinged covers
• Easy to remove covers and baskets for cleaning
• Two stage grease extraction with fat take off valve
• Built in Suction valve for empting the grease trap
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 4l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 1900x900x900
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Prisons, Hotels, Hospitals, Food Industry, Catering Industry,
Commercial and Industrial Kitchens
 63
ROGT 2000 / 7 lit/sec

ROGT 2000 / 7 lit/sec Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Separated Strainer and Grease trap
• Two large strainer baskets with draining slots
• Four separate hinged covers
• Easy to remove covers and baskets for cleaning
• Two stage grease extraction with fat take off valve
• Built in Suction valve for empting the grease trap
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 7l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 2400x1100x1000
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Prisons, Hotels, Hospitals, Food Industry, Catering Industry,
Commercial and Industrial Kitchens
64
ROGT 2000 / 10 lit/sec

ROGT 2000 / 10 lit/sec Grease Trap

Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Separated Strainer and Grease trap
• Two large strainer baskets with draining slots
• Five separate hinged covers
• Easy to remove covers and baskets for cleaning
• Two stage grease extraction with fat take off valve
• Built in Suction valve for empting the grease trap
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 10l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 2700x1300x1200
• Inlet/Outlet 100mm / 110mm / 160mm
TYPICAL USES: Prisons, Hotels, Hospitals, Food Industry, Catering Industry,
Commercial and Industrial Kitchens
 65
ROGT 2000
UNDERGROUND INSTALLATION
66
RO SOW SEPARATOR

RO SOW Separator
Features:
• Manufactured from Stainless Steel to ensure acid corrosion and stain resistance;
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates;
• Separated Strainer and sand trap
• One large strainer baskets with draining slots
• Easy to remove baskets for cleaning
• One stage grease extraction with fat take off valve
• The discharge pipe is fully accessible once the inspection cover has been dismantled
• Flow Rate: 4l/sec
• Material Stainless Steel 304
• Size (L)x(H)x(W) = 1850x700x500
• Inlet/Outlet 100mm / 110mm
TYPICAL USES: Car and equipment wash bay
 67

GLASS TRAPS
• Rofo Glass Trap
68
 69
ROFO GLASS TRAP

Rofo Glass Trap

Unique Full Flow Floor Trap with the following features:
• Manufactured from Stainless Steel 304 to ensure acid corrosion and stain resistance.
• Smooth surfaces for easy cleaning, minimum dirt collection and high flow rates.
• A perforated basket to retain the broken glass solids.
• Easy to dismantle.
• Grating Frame Type: Square
TYPICAL APPLICATIONS: Bottling and glass industries
70
 71

RODDING EYES
• Rodding Eye Cover Plate - Internal Bolting
• Rodding Eye Cover Plate - External Bolting
• Rodding Eye Cover 45º
• Rodding Eye Grating Cover
72
 73
RODDING EYE COVER PLATE
INTERNAL BOLTING
74
RODDING EYE COVER PLATE
EXTERNAL BOLTING
 75
RODDING EYE COVER 45º
76
RODDING EYE GRATING COVER
August 2014 Edition

www.rofo.co.za

011 440 6126 | www.gartone.co.za

Design & Print | Gartone Press
122 Shad Road, Wadeville Ext 2 | PO Box 14834, Wadeville 1422

t +27 11 824 3525/6 f +27 11 824 3527 @ [email protected]