MCT 10 Set-up Software

MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

Group Folder: Project

Drive Name: 1; FC-302 2.20KW (P2K2) 380V-500V

Connected Drive Information Database Information
Drive Series: FC-302 FC-302
Drive Type: 2.20KW (P2K2) 380V-500V 2.20KW (P2K2) 380V-500V
SW Version: 07.26 07.26
Option A No Option No Option
Option B No Option No Option
Option C0/E0 No Option No Option
Option C1/E1 No Option No Option
Drive Address: 1
Driver Name: USB 1
Description

Parameter Group: 0-** Operation / Display

ID Name Setup 1 Unit

001 Language Español
002 Motor Speed Unit Hz
003 Regional Settings International
004 Operating State at Power-up (Hand)
Forced stop, ref=old
010 Active Set-up Set-up 1
011 Edit Set-up Active Set-up
012 This Set-up Linked to Not linked
013.0 Readout: Linked Set-ups {0}
013.1 Readout: Linked Set-ups {1}
013.2 Readout: Linked Set-ups {2}
013.3 Readout: Linked Set-ups {3}
013.4 Readout: Linked Set-ups {4}
014 Readout: Edit Set-ups / Channel AAAAA1AAhex
015 Readout: actual setup 1
020 Display Line 1.1 Small Speed [RPM]
021 Display Line 1.2 Small Motor current
022 Display Line 1.3 Small Power [kW]
023 Display Line 2 Large Frequency
024 Display Line 3 Large Reference %
025.0 My Personal Menu 1
025.1 My Personal Menu 20
025.2 My Personal Menu 21
025.3 My Personal Menu 22
025.4 My Personal Menu 23
025.5 My Personal Menu 24
025.6 My Personal Menu 120
025.7 My Personal Menu 121
025.8 My Personal Menu 122
025.9 My Personal Menu 123
025.10 My Personal Menu 124
025.11 My Personal Menu 125
025.12 My Personal Menu 302
025.13 My Personal Menu 303
025.14 My Personal Menu 310
025.15 My Personal Menu 341
025.16 My Personal Menu 342
025.17 My Personal Menu 1551
025.18 My Personal Menu 0
025.19 My Personal Menu 0

Page: 1 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

025.20 My Personal Menu 0

025.21 My Personal Menu 0
025.22 My Personal Menu 0
025.23 My Personal Menu 0
025.24 My Personal Menu 0
025.25 My Personal Menu 0
025.26 My Personal Menu 0
025.27 My Personal Menu 0
025.28 My Personal Menu 0
025.29 My Personal Menu 0
025.30 My Personal Menu 0
025.31 My Personal Menu 0
025.32 My Personal Menu 0
025.33 My Personal Menu 0
025.34 My Personal Menu 0
025.35 My Personal Menu 0
025.36 My Personal Menu 0
025.37 My Personal Menu 0
025.38 My Personal Menu 0
025.39 My Personal Menu 0
025.40 My Personal Menu 0
025.41 My Personal Menu 0
025.42 My Personal Menu 0
025.43 My Personal Menu 0
025.44 My Personal Menu 0
025.45 My Personal Menu 0
025.46 My Personal Menu 0
025.47 My Personal Menu 0
025.48 My Personal Menu 0
025.49 My Personal Menu 0
030 Unit for User-defined Readout None
031 Min Value of User-defined Readout
0.00 None
032 Max Value of User-defined Readout
100.00 None
037 Display Text 1
038 Display Text 2
039 Display Text 3
040 [Hand on] Key on LCP Enabled
041 [Off] Key on LCP Enabled
042 [Auto on] Key on LCP Enabled
043 [Reset] Key on LCP Enabled
050 LCP Copy No copy
051 Set-up Copy No copy
060 Main Menu Password 100
061 Access to Main Menu w/o Password
Full access
065 Quick Menu Password 200
066 Access to Quick Menu w/o Password
Full access
067 Bus Password Access 0

Parameter Group: 1-** Load and Motor

ID Name Setup 1 Unit

100 Configuration Mode Speed open loop
101 Motor Control Principle VVC+
102 Flux Motor Feedback Source 24V encoder
103 Torque Characteristics Constant torque
104 Overload Mode High torque
105 Local Mode Configuration As mode par 1-00
106 Clockwise Direction Normal
107 Motor Angle Offset Adjust Manual
110 Motor Construction Asynchron

Page: 2 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

111 Motor Model Std. Asynchron

114 Damping Gain 140 %
115 Low Speed Filter Time Const. 1.00 s
116 High Speed Filter Time Const. 1.00 s
117 Voltage filter time const. 0.500 s
118 Min. Current at No Load 0 %
120 Motor Power [kW] 2.20 kW
121 Motor Power [HP] 2.95 hp
122 Motor Voltage 460 V
123 Motor Frequency 60 Hz
124 Motor Current 4.70 A
125 Motor Nominal Speed 1704 RPM
126 Motor Cont. Rated Torque 5.0 Nm
129 Automatic Motor Adaptation (AMA) Off
130 Stator Resistance (Rs) 2.4637 Ohm
131 Rotor Resistance (Rr) 1.9269 Ohm
133 Stator Leakage Reactance (X1) 5.6507 Ohm
134 Rotor Leakage Reactance (X2) 5.6507 Ohm
135 Main Reactance (Xh) 129.9652 Ohm
136 Iron Loss Resistance (Rfe) 2,385.663 Ohm
137 d-axis Inductance (Ld) 0.0 mH
138 q-axis Inductance (Lq) 0.000 mH
139 Motor Poles 4
140 Back EMF at 1000 RPM 400 V
141 Motor Angle Offset 0
144 d-axis Inductance Sat. (LdSat) 0.0 mH
145 q-axis Inductance Sat. (LqSat) 0.0 mH
146 Position Detection Gain 100 %
147 Torque Calibration Off
148 Inductance Sat. Point 35 %
150 Motor Magnetisation at Zero Speed100 %
151 Min Speed Normal Magnetising [RPM]
15 RPM
152 Min Speed Normal Magnetising [Hz]0.5 Hz
153 Model Shift Frequency 16.0 Hz
154 Voltage reduction in fieldweakening
0 V
155.0 U/f Characteristic - U 10.1 V
155.1 U/f Characteristic - U 400.0 V
155.2 U/f Characteristic - U 400.0 V
155.3 U/f Characteristic - U 400.0 V
155.4 U/f Characteristic - U 400.0 V
155.5 U/f Characteristic - U 400.0 V
156.0 U/f Characteristic - F 0.0 Hz
156.1 U/f Characteristic - F 60.0 Hz
156.2 U/f Characteristic - F 60.0 Hz
156.3 U/f Characteristic - F 60.0 Hz
156.4 U/f Characteristic - F 60.0 Hz
156.5 U/f Characteristic - F 60.0 Hz
158 Flying Start Test Pulses Current 30 %
159 Flying Start Test Pulses Frequency
200 %
160 Low Speed Load Compensation 100 %
161 High Speed Load Compensation 100 %
162 Slip Compensation 100 %
163 Slip Compensation Time Constant0.10 s
164 Resonance Damping 100 %
165 Resonance Damping Time Constant 5 ms
166 Min. Current at Low Speed 100 %
167 Load Type Passive load
168 Motor Inertia 0.0000 kgm²
169 System Inertia 0.0049 kgm²
170 PM Start Mode Rotor Detection
171 Start Delay 0.0 s

Page: 3 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

172 Start Function Coast/delay time

173 Flying Start Disabled
174 Start Speed [RPM] 0 RPM
175 Start Speed [Hz] 0.0 Hz
176 Start Current 0.00 A
180 Function at Stop Coast
181 Min Speed for Function at Stop [RPM]
1 RPM
182 Min Speed for Function at Stop [Hz]
0.0 Hz
183 Precise Stop Function Precise ramp stop
184 Precise Stop Counter Value 100000
185 Precise Stop Speed Compensation10 Delay ms
190 Motor Thermal Protection ETR warning 1
191 Motor External Fan No
193 Thermistor Resource None
194 ATEX ETR [Link]. speed reduction
0.0 %
195 KTY Sensor Type KTY Sensor 1
196 KTY Thermistor Resource None
197 KTY Threshold level 80 °C
198.0 ATEX ETR interpol. points freq. 5.0 Hz
198.1 ATEX ETR interpol. points freq. 25.0 Hz
198.2 ATEX ETR interpol. points freq. 50.0 Hz
198.3 ATEX ETR interpol. points freq. 100.0 Hz
199.0 ATEX ETR interpol points current100 %
199.1 ATEX ETR interpol points current100 %
199.2 ATEX ETR interpol points current100 %
199.3 ATEX ETR interpol points current100 %

Parameter Group: 2-** Brakes

ID Name Setup 1 Unit

200 DC Hold Current 50 %
201 DC Brake Current 50 %
202 DC Braking Time 10.0 s
203 DC Brake Cut In Speed [RPM] 0 RPM
204 DC Brake Cut In Speed [Hz] 0.0 Hz
206 Parking Current 50 %
207 Parking Time 3.0 s
210 Brake Function Off
211 Brake Resistor (ohm) 186 Ohm
212 Brake Power Limit (kW) 3.200 kW
213 Brake Power Monitoring Off
215 Brake Check Off
216 AC brake Max. Current 100.0 %
217 Over-voltage Control Disabled
218 Brake Check Condition At Power Up
219 Over-voltage Gain 100 %
220 Release Brake Current 7.68 A
221 Activate Brake Speed [RPM] 300 RPM
222 Activate Brake Speed [Hz] 10.0 Hz
223 Activate Brake Delay 0.0 s
224 Stop Delay 0.0 s
225 Brake Release Time 0.20 s
226 Torque Ref 0.00 %
227 Torque Ramp Up Time 0.2 s
228 Gain Boost Factor 1.00
229 Torque Ramp Down Time 0.0 s
230 Position P Start Proportional Gain0.0000
231 Speed PID Start Proportional Gain 0.0150
232 Speed PID Start Integral Time 200.0 ms
233 Speed PID Start Lowpass Filter Time
10.0 ms

Page: 4 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

Parameter Group: 3-** Reference / Ramps

ID Name Setup 1 Unit

300 Reference Range Min - Max
301 Reference/Feedback Unit Hz
302 Minimum Reference 0.000 RPM
303 Maximum Reference 100.000 RPM
304 Reference Function Sum
310.0 Preset Reference 0.00 %
310.1 Preset Reference 0.00 %
310.2 Preset Reference 0.00 %
310.3 Preset Reference 0.00 %
310.4 Preset Reference 0.00 %
310.5 Preset Reference 0.00 %
310.6 Preset Reference 0.00 %
310.7 Preset Reference 0.00 %
311 Jog Speed [Hz] 5.0 Hz
312 Catch up/slow Down Value 0.00 %
313 Reference Site Linked to Hand / Auto
314 Preset Relative Reference 0.00 %
315 Reference Resource 1 Analog Input 53
316 Reference Resource 2 Digital [Link]
317 Reference Resource 3 Local bus reference
318 Relative Scaling Reference Resource
No function
319 Jog Speed [RPM] 150 RPM
340 Ramp 1 Type Linear
341 Ramp 1 Ramp Up Time 0.50 s
342 Ramp 1 Ramp Down Time 0.50 s
345 Ramp 1 S-ramp Ratio at Accel. Start
50 %
346 Ramp 1 S-ramp Ratio at Accel. End
50 %
347 Ramp 1 S-ramp Ratio at Decel. Start
50 %
348 Ramp 1 S-ramp Ratio at Decel. End
50 %
350 Ramp 2 Type Linear
351 Ramp 2 Ramp Up Time 3.00 s
352 Ramp 2 Ramp Down Time 3.00 s
355 Ramp 2 S-ramp Ratio at Accel. Start
50 %
356 Ramp 2 S-ramp Ratio at Accel. End
50 %
357 Ramp 2 S-ramp Ratio at Decel. Start
50 %
358 Ramp 2 S-ramp Ratio at Decel. End
50 %
360 Ramp 3 Type Linear
361 Ramp 3 Ramp up Time 3.00 s
362 Ramp 3 Ramp down Time 3.00 s
365 Ramp 3 S-ramp Ratio at Accel. Start
50 %
366 Ramp 3 S-ramp Ratio at Accel. End
50 %
367 Ramp 3 S-ramp Ratio at Decel. Start
50 %
368 Ramp 3 S-ramp Ratio at Decel. End
50 %
370 Ramp 4 Type Linear
371 Ramp 4 Ramp up Time 3.00 s
372 Ramp 4 Ramp Down Time 3.00 s
375 Ramp 4 S-ramp Ratio at Accel. Start
50 %
376 Ramp 4 S-ramp Ratio at Accel. End
50 %
377 Ramp 4 S-ramp Ratio at Decel. Start
50 %
378 Ramp 4 S-ramp Ratio at Decel. End
50 %
380 Jog Ramp Time 10.00 s
381 Quick Stop Ramp Time 1.00 s
382 Quick Stop Ramp Type Linear
383 Quick Stop S-ramp Ratio at Decel.
50Start %
384 Quick Stop S-ramp Ratio at Decel.
50End %
390 Step Size 0.10 %

Page: 5 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

391 Ramp Time 1.00 s

392 Power Restore Off
393 Maximum Limit 100 %
394 Minimum Limit -100 %
395 Ramp Delay [Link].001

Parameter Group: 4-** Limits / Warnings

ID Name Setup 1 Unit

410 Motor Speed Direction Clockwise
411 Motor Speed Low Limit [RPM] 0 RPM
412 Motor Speed Low Limit [Hz] 0.0 Hz
413 Motor Speed High Limit [RPM] 3000 RPM
414 Motor Speed High Limit [Hz] 100.0 Hz
416 Torque Limit Motor Mode 160.0 %
417 Torque Limit Generator Mode 100.0 %
418 Current Limit 160.0 %
419 Max Output Frequency 132.0 Hz
420 Torque Limit Factor Source No function
421 Speed Limit Factor Source No function
423 Brake Check Limit Factor SourceDC-link voltage
424 Brake Check Limit Factor 98 %
430 Motor Feedback Loss Function Trip
431 Motor Feedback Speed Error 300 RPM
432 Motor Feedback Loss Timeout 0.05 s
434 Tracking Error Function Disable
435 Tracking Error 10 RPM
436 Tracking Error Timeout 1.00 s
437 Tracking Error Ramping 100 RPM
438 Tracking Error Ramping Timeout1.00 s
439 Tracking Error After Ramping Timeout
5.00 s
450 Warning Current Low 0.00 A
451 Warning Current High 7.68 A
452 Warning Speed Low 0 RPM
453 Warning Speed High 3000 RPM
454 Warning Reference Low -999,999.999
455 Warning Reference High 999,999.999
456 Warning Feedback Low -999,999.999 RPM
457 Warning Feedback High 999,999.999 RPM
458 Missing Motor Phase Function Trip 1000 ms
460.0 Bypass Speed From [RPM] 0 RPM
460.1 Bypass Speed From [RPM] 0 RPM
460.2 Bypass Speed From [RPM] 0 RPM
460.3 Bypass Speed From [RPM] 0 RPM
461.0 Bypass Speed From [Hz] 0.0 Hz
461.1 Bypass Speed From [Hz] 0.0 Hz
461.2 Bypass Speed From [Hz] 0.0 Hz
461.3 Bypass Speed From [Hz] 0.0 Hz
462.0 Bypass Speed To [RPM] 0 RPM
462.1 Bypass Speed To [RPM] 0 RPM
462.2 Bypass Speed To [RPM] 0 RPM
462.3 Bypass Speed To [RPM] 0 RPM
463.0 Bypass Speed To [Hz] 0.0 Hz
463.1 Bypass Speed To [Hz] 0.0 Hz
463.2 Bypass Speed To [Hz] 0.0 Hz
463.3 Bypass Speed To [Hz] 0.0 Hz

Parameter Group: 5-** Digital In/Out

Page: 6 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

ID Name Setup 1 Unit

500 Digital I/O Mode PNP
501 Terminal 27 Mode Input
502 Terminal 29 Mode Input
510 Terminal 18 Digital Input Start
511 Terminal 19 Digital Input Reversing
512 Terminal 27 Digital Input No operation
513 Terminal 29 Digital Input Jog
514 Terminal 32 Digital Input No operation
515 Terminal 33 Digital Input No operation
519 Terminal 37 Safe Stop Safe Stop Warning
530 Terminal 27 Digital Output No operation
531 Terminal 29 Digital Output No operation
540.0 Function Relay Ready,no thermal W
540.1 Function Relay Running
540.2 Function Relay No operation
540.3 Function Relay No operation
540.4 Function Relay No operation
540.5 Function Relay No operation
540.6 Function Relay No operation
540.7 Function Relay No operation
540.8 Function Relay No operation
541.0 On Delay, Relay 0.01 s
541.1 On Delay, Relay 0.01 s
541.2 On Delay, Relay 0.01 s
541.3 On Delay, Relay 0.01 s
541.4 On Delay, Relay 0.01 s
541.5 On Delay, Relay 0.01 s
541.6 On Delay, Relay 0.01 s
541.7 On Delay, Relay 0.01 s
541.8 On Delay, Relay 0.01 s
542.0 Off Delay, Relay 0.01 s
542.1 Off Delay, Relay 0.01 s
542.2 Off Delay, Relay 0.01 s
542.3 Off Delay, Relay 0.01 s
542.4 Off Delay, Relay 0.01 s
542.5 Off Delay, Relay 0.01 s
542.6 Off Delay, Relay 0.01 s
542.7 Off Delay, Relay 0.01 s
542.8 Off Delay, Relay 0.01 s
550 Term. 29 Low Frequency 100 Hz
551 Term. 29 High Frequency 100 Hz
552 Term. 29 Low Ref./Feedb. Value 0.000 RPM
553 Term. 29 High Ref./Feedb. Value50.000 RPM
554 Pulse Filter Time Constant #29 100 ms
555 Term. 33 Low Frequency 100 Hz
556 Term. 33 High Frequency 100 Hz
557 Term. 33 Low Ref./Feedb. Value 0.000 RPM
558 Term. 33 High Ref./Feedb. Value50.000 RPM
559 Pulse Filter Time Constant #33 100 ms
560 Terminal 27 Pulse Output Variable
No operation
562 Pulse Output Max Freq #27 5000 Hz
563 Terminal 29 Pulse Output Variable
No operation
565 Pulse Output Max Freq #29 5000 Hz
570 Term 32/33 Pulses Per Revolution
1024
571 Term 32/33 Encoder Direction Clockwise
580 AHF Cap Reconnect Delay 25 s
590 Digital & Relay Bus Control 0hex
593 Pulse Out #27 Bus Control 0.00 %
594 Pulse Out #27 Timeout Preset 0.00 %
595 Pulse Out #29 Bus Control 0.00 %

Page: 7 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

596 Pulse Out #29 Timeout Preset 0.00 %

Parameter Group: 6-** Analog In/Out

ID Name Setup 1 Unit

600 Live Zero Timeout Time 10 s
601 Live Zero Timeout Function Off
610 Terminal 53 Low Voltage 0.07 V
611 Terminal 53 High Voltage 10.00 V
612 Terminal 53 Low Current 0.14 mA
613 Terminal 53 High Current 20.00 mA
614 Terminal 53 Low Ref./Feedb. Value
0.000 RPM
615 Terminal 53 High Ref./Feedb. Value
100.000 RPM
616 Terminal 53 Filter Time Constant0.001 s
620 Terminal 54 Low Voltage 0.07 V
621 Terminal 54 High Voltage 10.00 V
622 Terminal 54 Low Current 0.14 mA
623 Terminal 54 High Current 20.00 mA
624 Terminal 54 Low Ref./Feedb. Value
0.000 RPM
625 Terminal 54 High Ref./Feedb. Value
50.000 RPM
626 Terminal 54 Filter Time Constant0.001 s
650 Terminal 42 Output No operation
651 Terminal 42 Output Min Scale 0.00 %
652 Terminal 42 Output Max Scale 100.00 %
653 Term 42 Output Bus Ctrl 0.00 %
654 Terminal 42 Output Timeout Preset
0.00 %
655 Analog Output Filter Off

Parameter Group: 7-** Controllers

ID Name Setup 1 Unit

700 Speed PID Feedback Source 24V encoder
701 Speed PID Droop 0 RPM
702 Speed PID Proportional Gain 0.015
703 Speed PID Integral Time 8.0 ms
704 Speed PID Differentiation Time 30.0 ms
705 Speed PID Diff. Gain Limit 5.0
706 Speed PID Lowpass Filter Time 10.0 ms
707 Speed PID Feedback Gear Ratio 1.0000
708 Speed PID Feed Forward Factor 0 %
709 Speed PID Error Correction w/ Ramp
300 RPM
710 Torque PI Feedback Source Controller Off
712 Torque PI Proportional Gain 100 %
713 Torque PI Integration Time 0.020 s
716 Torque PI Lowpass Filter Time 5.0 ms
718 Torque PI Feed Forward Factor 0 %
719 Current Controller Rise Time 100 %
720 Process CL Feedback 1 ResourceNo function
722 Process CL Feedback 2 ResourceNo function
730 Process PID Normal/ Inverse Control
Normal
731 Process PID Anti Windup On
732 Process PID Start Speed 0 RPM
733 Process PID Proportional Gain 0.10
734 Process PID Integral Time 10,000.00 s
735 Process PID Differentiation Time0.00 s
736 Process PID Diff. Gain Limit 5.0
738 Process PID Feed Forward Factor0 %
739 On Reference Bandwidth 5 %
740 Process PID I-part Reset No

Page: 8 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

741 Process PID Output Neg. Clamp -100 %

742 Process PID Output Pos. Clamp 100 %
743 Process PID Gain Scale at Min. Ref.
100 %
744 Process PID Gain Scale at Max. Ref.
100 %
745 Process PID Feed Fwd Resource No function
746 Process PID Feed Fwd Normal/ Inv.
Normal
Ctrl.
749 Process PID Output Normal/ [Link]
Ctrl.
750 Process PID Extended PID Enabled
751 Process PID Feed Fwd Gain 1.00
752 Process PID Feed Fwd Ramp up 0.01 s
753 Process PID Feed Fwd Ramp down 0.01 s
756 Process PID Ref. Filter Time 0.001 s
757 Process PID Fb. Filter Time 0.001 s

Parameter Group: 8-** Comm. and Options

ID Name Setup 1 Unit

801 Control Site Digital and [Link]
802 Control Word Source FC RS485
803 Control Word Timeout Time 1.0 s
804 Control Word Timeout Function Off
805 End-of-Timeout Function Resume set-up
806 Reset Control Word Timeout Do not reset
807 Diagnosis Trigger Disable
808.0 Readout Filtering Motor Data Std-Filt.
810 Control Word Profile FC profile
813.0 Configurable Status Word STW Profile Default
813.1 Configurable Status Word STW Profile Default
813.2 Configurable Status Word STW Profile Default
813.3 Configurable Status Word STW Profile Default
813.4 Configurable Status Word STW Profile Default
813.5 Configurable Status Word STW Profile Default
813.6 Configurable Status Word STW Profile Default
813.7 Configurable Status Word STW Profile Default
813.8 Configurable Status Word STW Profile Default
813.9 Configurable Status Word STW Profile Default
813.10 Configurable Status Word STW Profile Default
813.11 Configurable Status Word STW Profile Default
813.12 Configurable Status Word STW Profile Default
813.13 Configurable Status Word STW Profile Default
813.14 Configurable Status Word STW Profile Default
813.15 Configurable Status Word STW Profile Default
814.0 Configurable Control Word CTWProfile default
814.1 Configurable Control Word CTWProfile default
814.2 Configurable Control Word CTWProfile default
814.3 Configurable Control Word CTWProfile default
814.4 Configurable Control Word CTWProfile default
814.5 Configurable Control Word CTWProfile default
814.6 Configurable Control Word CTWProfile default
814.7 Configurable Control Word CTWProfile default
814.8 Configurable Control Word CTWProfile default
814.9 Configurable Control Word CTWProfile default
814.10 Configurable Control Word CTWProfile default
814.11 Configurable Control Word CTWProfile default
814.12 Configurable Control Word CTWProfile default
814.13 Configurable Control Word CTWProfile default
814.14 Configurable Control Word CTWProfile default
814.15 Configurable Control Word CTWProfile default
817.0 Configurable Alarm and Warningword
Off
817.1 Configurable Alarm and Warningword
Off

Page: 9 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

817.2 Configurable Alarm and Warningword

Off
817.3 Configurable Alarm and Warningword
Off
817.4 Configurable Alarm and Warningword
Off
817.5 Configurable Alarm and Warningword
Off
817.6 Configurable Alarm and Warningword
Off
817.7 Configurable Alarm and Warningword
Off
817.8 Configurable Alarm and Warningword
Off
817.9 Configurable Alarm and Warningword
Off
817.10 Configurable Alarm and Warningword
Off
817.11 Configurable Alarm and Warningword
Off
817.12 Configurable Alarm and Warningword
Off
817.13 Configurable Alarm and Warningword
Off
817.14 Configurable Alarm and Warningword
Off
817.15 Configurable Alarm and Warningword
Off
819.0 Product Code 0
819.1 Product Code 0
831 Address 1
832 FC Port Baud Rate 9600 Baud
833 Parity / Stop Bits Even Parity, 1 Stop Bit
834 Estimated cycle time 0 ms
835 Minimum Response Delay 10 ms
836 Max Response Delay 10001 ms
837 Max Inter-Char Delay 35.01 ms
840 Telegram Selection Standard telegram 1
842.0 PCD Write Configuration 1685
842.1 PCD Write Configuration 1686
842.2 PCD Write Configuration 0
842.3 PCD Write Configuration 0
842.4 PCD Write Configuration 0
842.5 PCD Write Configuration 0
842.6 PCD Write Configuration 0
842.7 PCD Write Configuration 0
842.8 PCD Write Configuration 0
842.9 PCD Write Configuration 0
842.10 PCD Write Configuration 0
842.11 PCD Write Configuration 0
842.12 PCD Write Configuration 0
842.13 PCD Write Configuration 0
842.14 PCD Write Configuration 0
842.15 PCD Write Configuration 0
842.16 PCD Write Configuration 0
842.17 PCD Write Configuration 0
842.18 PCD Write Configuration 0
842.19 PCD Write Configuration 0
842.20 PCD Write Configuration 0
842.21 PCD Write Configuration 0
842.22 PCD Write Configuration 0
842.23 PCD Write Configuration 0
842.24 PCD Write Configuration 0
842.25 PCD Write Configuration 0
842.26 PCD Write Configuration 0
842.27 PCD Write Configuration 0
842.28 PCD Write Configuration 0
842.29 PCD Write Configuration 0
842.30 PCD Write Configuration 0
842.31 PCD Write Configuration 0
842.32 PCD Write Configuration 0
842.33 PCD Write Configuration 0
842.34 PCD Write Configuration 0
842.35 PCD Write Configuration 0
842.36 PCD Write Configuration 0

Page: 10 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

842.37 PCD Write Configuration 0

842.38 PCD Write Configuration 0
842.39 PCD Write Configuration 0
842.40 PCD Write Configuration 0
842.41 PCD Write Configuration 0
842.42 PCD Write Configuration 0
842.43 PCD Write Configuration 0
842.44 PCD Write Configuration 0
842.45 PCD Write Configuration 0
842.46 PCD Write Configuration 0
842.47 PCD Write Configuration 0
842.48 PCD Write Configuration 0
842.49 PCD Write Configuration 0
842.50 PCD Write Configuration 0
842.51 PCD Write Configuration 0
842.52 PCD Write Configuration 0
842.53 PCD Write Configuration 0
842.54 PCD Write Configuration 0
842.55 PCD Write Configuration 0
842.56 PCD Write Configuration 0
842.57 PCD Write Configuration 0
842.58 PCD Write Configuration 0
842.59 PCD Write Configuration 0
842.60 PCD Write Configuration 0
842.61 PCD Write Configuration 0
842.62 PCD Write Configuration 0
842.63 PCD Write Configuration 0
843.0 PCD Read Configuration 1603
843.1 PCD Read Configuration 1605
843.2 PCD Read Configuration 0
843.3 PCD Read Configuration 0
843.4 PCD Read Configuration 0
843.5 PCD Read Configuration 0
843.6 PCD Read Configuration 0
843.7 PCD Read Configuration 0
843.8 PCD Read Configuration 0
843.9 PCD Read Configuration 0
843.10 PCD Read Configuration 0
843.11 PCD Read Configuration 0
843.12 PCD Read Configuration 0
843.13 PCD Read Configuration 0
843.14 PCD Read Configuration 0
843.15 PCD Read Configuration 0
843.16 PCD Read Configuration 0
843.17 PCD Read Configuration 0
843.18 PCD Read Configuration 0
843.19 PCD Read Configuration 0
843.20 PCD Read Configuration 0
843.21 PCD Read Configuration 0
843.22 PCD Read Configuration 0
843.23 PCD Read Configuration 0
843.24 PCD Read Configuration 0
843.25 PCD Read Configuration 0
843.26 PCD Read Configuration 0
843.27 PCD Read Configuration 0
843.28 PCD Read Configuration 0
843.29 PCD Read Configuration 0
843.30 PCD Read Configuration 0
843.31 PCD Read Configuration 0
843.32 PCD Read Configuration 0
843.33 PCD Read Configuration 0

Page: 11 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

843.34 PCD Read Configuration 0

843.35 PCD Read Configuration 0
843.36 PCD Read Configuration 0
843.37 PCD Read Configuration 0
843.38 PCD Read Configuration 0
843.39 PCD Read Configuration 0
843.40 PCD Read Configuration 0
843.41 PCD Read Configuration 0
843.42 PCD Read Configuration 0
843.43 PCD Read Configuration 0
843.44 PCD Read Configuration 0
843.45 PCD Read Configuration 0
843.46 PCD Read Configuration 0
843.47 PCD Read Configuration 0
843.48 PCD Read Configuration 0
843.49 PCD Read Configuration 0
843.50 PCD Read Configuration 0
843.51 PCD Read Configuration 0
843.52 PCD Read Configuration 0
843.53 PCD Read Configuration 0
843.54 PCD Read Configuration 0
843.55 PCD Read Configuration 0
843.56 PCD Read Configuration 0
843.57 PCD Read Configuration 0
843.58 PCD Read Configuration 0
843.59 PCD Read Configuration 0
843.60 PCD Read Configuration 0
843.61 PCD Read Configuration 0
843.62 PCD Read Configuration 0
843.63 PCD Read Configuration 0
846 BTM Transaction Status Off
847 BTM Timeout 60 s
848 BTM Maximum Errors 21
849.0 BTM Error Log 0.255
849.1 BTM Error Log 0.255
849.2 BTM Error Log 0.255
849.3 BTM Error Log 0.255
849.4 BTM Error Log 0.255
849.5 BTM Error Log 0.255
849.6 BTM Error Log 0.255
849.7 BTM Error Log 0.255
849.8 BTM Error Log 0.255
849.9 BTM Error Log 0.255
849.10 BTM Error Log 0.255
849.11 BTM Error Log 0.255
849.12 BTM Error Log 0.255
849.13 BTM Error Log 0.255
849.14 BTM Error Log 0.255
849.15 BTM Error Log 0.255
849.16 BTM Error Log 0.255
849.17 BTM Error Log 0.255
849.18 BTM Error Log 0.255
849.19 BTM Error Log 0.255
849.20 BTM Error Log 0.255
850 Coasting Select Logic OR
851 Quick Stop Select Logic OR
852 DC Brake Select Logic OR
853 Start Select Logic OR
854 Reversing Select Logic OR
855 Set-up Select Logic OR
856 Preset Reference Select Logic OR

Page: 12 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

857 Profidrive OFF2 Select Logic OR

858 Profidrive OFF3 Select Logic OR
880 Bus Message Count 0
881.0 Bus Error Count 0
881.1 Bus Error Count 0
881.2 Bus Error Count 0
881.3 Bus Error Count 0
881.4 Bus Error Count 0
881.5 Bus Error Count 0
882 Slave Messages Rcvd 0
883 Slave Error Count 0
890 Bus Jog 1 Speed 100 RPM
891 Bus Jog 2 Speed 200 RPM

Parameter Group: 13-** Smart Logic

ID Name Setup 1 Unit

1300 SL Controller Mode Off
1301 Start Event Start command
1302 Stop Event Drive stopped
1310.0 Comparator Operand DISABLED
1310.1 Comparator Operand DISABLED
1310.2 Comparator Operand DISABLED
1310.3 Comparator Operand DISABLED
1310.4 Comparator Operand DISABLED
1310.5 Comparator Operand DISABLED
1311.0 Comparator Operator ˜ (equal)
1311.1 Comparator Operator ˜ (equal)
1311.2 Comparator Operator ˜ (equal)
1311.3 Comparator Operator ˜ (equal)
1311.4 Comparator Operator ˜ (equal)
1311.5 Comparator Operator ˜ (equal)
1312.0 Comparator Value 0.000
1312.1 Comparator Value 0.000
1312.2 Comparator Value 0.000
1312.3 Comparator Value 0.000
1312.4 Comparator Value 0.000
1312.5 Comparator Value 0.000
1315.0 RS-FF Operand S False
1315.1 RS-FF Operand S False
1315.2 RS-FF Operand S False
1315.3 RS-FF Operand S False
1315.4 RS-FF Operand S False
1315.5 RS-FF Operand S False
1315.6 RS-FF Operand S False
1315.7 RS-FF Operand S False
1316.0 RS-FF Operand R False
1316.1 RS-FF Operand R False
1316.2 RS-FF Operand R False
1316.3 RS-FF Operand R False
1316.4 RS-FF Operand R False
1316.5 RS-FF Operand R False
1316.6 RS-FF Operand R False
1316.7 RS-FF Operand R False
1320.0 SL Controller Timer [Link].000
1320.1 SL Controller Timer [Link].000
1320.2 SL Controller Timer [Link].000
1320.3 SL Controller Timer [Link].000
1320.4 SL Controller Timer [Link].000
1320.5 SL Controller Timer [Link].000

Page: 13 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1320.6 SL Controller Timer [Link].000

1320.7 SL Controller Timer [Link].000
1340.0 Logic Rule Boolean 1 False
1340.1 Logic Rule Boolean 1 False
1340.2 Logic Rule Boolean 1 False
1340.3 Logic Rule Boolean 1 False
1340.4 Logic Rule Boolean 1 False
1340.5 Logic Rule Boolean 1 False
1341.0 Logic Rule Operator 1 DISABLED
1341.1 Logic Rule Operator 1 DISABLED
1341.2 Logic Rule Operator 1 DISABLED
1341.3 Logic Rule Operator 1 DISABLED
1341.4 Logic Rule Operator 1 DISABLED
1341.5 Logic Rule Operator 1 DISABLED
1342.0 Logic Rule Boolean 2 False
1342.1 Logic Rule Boolean 2 False
1342.2 Logic Rule Boolean 2 False
1342.3 Logic Rule Boolean 2 False
1342.4 Logic Rule Boolean 2 False
1342.5 Logic Rule Boolean 2 False
1343.0 Logic Rule Operator 2 DISABLED
1343.1 Logic Rule Operator 2 DISABLED
1343.2 Logic Rule Operator 2 DISABLED
1343.3 Logic Rule Operator 2 DISABLED
1343.4 Logic Rule Operator 2 DISABLED
1343.5 Logic Rule Operator 2 DISABLED
1344.0 Logic Rule Boolean 3 False
1344.1 Logic Rule Boolean 3 False
1344.2 Logic Rule Boolean 3 False
1344.3 Logic Rule Boolean 3 False
1344.4 Logic Rule Boolean 3 False
1344.5 Logic Rule Boolean 3 False
1351.0 SL Controller Event False
1351.1 SL Controller Event False
1351.2 SL Controller Event False
1351.3 SL Controller Event False
1351.4 SL Controller Event False
1351.5 SL Controller Event False
1351.6 SL Controller Event False
1351.7 SL Controller Event False
1351.8 SL Controller Event False
1351.9 SL Controller Event False
1351.10 SL Controller Event False
1351.11 SL Controller Event False
1351.12 SL Controller Event False
1351.13 SL Controller Event False
1351.14 SL Controller Event False
1351.15 SL Controller Event False
1351.16 SL Controller Event False
1351.17 SL Controller Event False
1351.18 SL Controller Event False
1351.19 SL Controller Event False
1352.0 SL Controller Action DISABLED
1352.1 SL Controller Action DISABLED
1352.2 SL Controller Action DISABLED
1352.3 SL Controller Action DISABLED
1352.4 SL Controller Action DISABLED
1352.5 SL Controller Action DISABLED
1352.6 SL Controller Action DISABLED
1352.7 SL Controller Action DISABLED
1352.8 SL Controller Action DISABLED

Page: 14 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1352.9 SL Controller Action DISABLED

1352.10 SL Controller Action DISABLED
1352.11 SL Controller Action DISABLED
1352.12 SL Controller Action DISABLED
1352.13 SL Controller Action DISABLED
1352.14 SL Controller Action DISABLED
1352.15 SL Controller Action DISABLED
1352.16 SL Controller Action DISABLED
1352.17 SL Controller Action DISABLED
1352.18 SL Controller Action DISABLED
1352.19 SL Controller Action DISABLED

Parameter Group: 14-** Special Functions

ID Name Setup 1 Unit

1400 Switching Pattern SFAVM
1401 Switching Frequency 5.0 kHz
1403 Overmodulation On
1404 PWM Random Off
1406 Dead Time Compensation On
1410 Mains Failure No function
1411 Mains Voltage at Mains Fault 342 V
1412 Function at Mains Imbalance Trip
1414 Kin. Backup Time Out 60 s
1415 Kin. Backup Trip Recovery Level1,000.000 RPM
1416 Kin. Backup Gain 100 %
1420 Reset Mode Manual reset
1421 Automatic Restart Time 10 s
1422 Operation Mode Normal operation
1424 Trip Delay at Current Limit 60 s
1425 Trip Delay at Torque Limit 60 s
1426 Trip Delay at Inverter Fault 3 s
1430 Current Lim Ctrl, Proportional Gain
100 %
1431 Current Lim Ctrl, Integration Time
0.020 s
1432 Current Lim Ctrl, Filter Time 1.0 ms
1435 Stall Protection Enabled
1436 Fieldweakening Function Auto
1440 VT Level 66 %
1441 AEO Minimum Magnetisation 40 %
1442 Minimum AEO Frequency 10 Hz
1443 Motor Cosphi 0.71
1450 RFI Filter On
1451 DC Link Compensation On
1452 Fan Control Auto
1453 Fan Monitor Warning
1455 Output Filter No Filter
1456 Capacitance Output Filter 2.0 uF
1457 Inductance Output Filter 7.000 mH
1459 Actual Number of Inverter Units 1
1472 Legacy Alarm Word 0hex
1473 Legacy Warning Word 0hex
1474 Leg. Ext. Status Word 0hex
1489 Option Detection Protect Option Config.
1490.0 Fault Level Warning
1490.1 Fault Level Trip Lock
1490.2 Fault Level Trip Lock
1490.3 Fault Level Warning
1490.4 Fault Level Trip
1490.5 Fault Level Trip
1490.6 Fault Level Warning

Page: 15 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1490.7 Fault Level Trip Lock

1490.8 Fault Level Trip Lock
1490.9 Fault Level Trip Lock
1490.10 Fault Level Trip Lock
1490.11 Fault Level Trip Lock
1490.12 Fault Level Trip Lock
1490.13 Fault Level Trip Lock
1490.14 Fault Level Trip Lock
1490.15 Fault Level Trip Lock
1490.16 Fault Level Trip Lock
1490.17 Fault Level Trip Lock
1490.18 Fault Level Trip Lock
1490.19 Fault Level Trip Lock
1490.20 Fault Level Trip Lock
1490.21 Fault Level Trip Lock
1490.22 Fault Level Trip Lock
1490.23 Fault Level Trip Lock
1490.24 Fault Level Trip Lock
1490.25 Fault Level Trip Lock

Parameter Group: 15-** Drive Information

ID Name Setup 1 Unit

1500 Operating hours 880 h
1501 Running Hours 4 h
1502 kWh Counter 0 kWh
1503 Power Up's 42
1504 Over Temp's 0
1505 Over Volt's 4
1506 Reset kWh Counter Do not reset
1507 Reset Running Hours Counter Do not reset
1510.0 Logging Source None
1510.1 Logging Source None
1510.2 Logging Source None
1510.3 Logging Source None
1511.0 Logging Interval [Link].001
1511.1 Logging Interval [Link].001
1511.2 Logging Interval [Link].001
1511.3 Logging Interval [Link].001
1512 Trigger Event False
1513 Logging Mode Log always
1514 Samples Before Trigger 50
1520.0 Historic Log: Event 0
1520.1 Historic Log: Event 0
1520.2 Historic Log: Event 0
1520.3 Historic Log: Event 0
1520.4 Historic Log: Event 0
1520.5 Historic Log: Event 0
1520.6 Historic Log: Event 0
1520.7 Historic Log: Event 0
1520.8 Historic Log: Event 0
1520.9 Historic Log: Event 0
1520.10 Historic Log: Event 0
1520.11 Historic Log: Event 0
1520.12 Historic Log: Event 0
1520.13 Historic Log: Event 0
1520.14 Historic Log: Event 0
1520.15 Historic Log: Event 0
1520.16 Historic Log: Event 0
1520.17 Historic Log: Event 0

Page: 16 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1520.18 Historic Log: Event 0

1520.19 Historic Log: Event 0
1520.20 Historic Log: Event 0
1520.21 Historic Log: Event 0
1520.22 Historic Log: Event 0
1520.23 Historic Log: Event 0
1520.24 Historic Log: Event 0
1520.25 Historic Log: Event 0
1520.26 Historic Log: Event 0
1520.27 Historic Log: Event 0
1520.28 Historic Log: Event 0
1520.29 Historic Log: Event 0
1520.30 Historic Log: Event 0
1520.31 Historic Log: Event 0
1520.32 Historic Log: Event 0
1520.33 Historic Log: Event 0
1520.34 Historic Log: Event 0
1520.35 Historic Log: Event 0
1520.36 Historic Log: Event 0
1520.37 Historic Log: Event 0
1520.38 Historic Log: Event 0
1520.39 Historic Log: Event 0
1520.40 Historic Log: Event 0
1520.41 Historic Log: Event 0
1520.42 Historic Log: Event 0
1520.43 Historic Log: Event 0
1520.44 Historic Log: Event 0
1520.45 Historic Log: Event 0
1520.46 Historic Log: Event 0
1520.47 Historic Log: Event 0
1520.48 Historic Log: Event 0
1520.49 Historic Log: Event 0
1521.0 Historic Log: Value 0
1521.1 Historic Log: Value 0
1521.2 Historic Log: Value 0
1521.3 Historic Log: Value 0
1521.4 Historic Log: Value 0
1521.5 Historic Log: Value 0
1521.6 Historic Log: Value 0
1521.7 Historic Log: Value 0
1521.8 Historic Log: Value 0
1521.9 Historic Log: Value 0
1521.10 Historic Log: Value 0
1521.11 Historic Log: Value 0
1521.12 Historic Log: Value 0
1521.13 Historic Log: Value 0
1521.14 Historic Log: Value 0
1521.15 Historic Log: Value 0
1521.16 Historic Log: Value 0
1521.17 Historic Log: Value 0
1521.18 Historic Log: Value 0
1521.19 Historic Log: Value 0
1521.20 Historic Log: Value 0
1521.21 Historic Log: Value 0
1521.22 Historic Log: Value 0
1521.23 Historic Log: Value 0
1521.24 Historic Log: Value 0
1521.25 Historic Log: Value 0
1521.26 Historic Log: Value 0
1521.27 Historic Log: Value 0
1521.28 Historic Log: Value 0

Page: 17 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1521.29 Historic Log: Value 0

1521.30 Historic Log: Value 0
1521.31 Historic Log: Value 0
1521.32 Historic Log: Value 0
1521.33 Historic Log: Value 0
1521.34 Historic Log: Value 0
1521.35 Historic Log: Value 0
1521.36 Historic Log: Value 0
1521.37 Historic Log: Value 0
1521.38 Historic Log: Value 0
1521.39 Historic Log: Value 0
1521.40 Historic Log: Value 0
1521.41 Historic Log: Value 0
1521.42 Historic Log: Value 0
1521.43 Historic Log: Value 0
1521.44 Historic Log: Value 0
1521.45 Historic Log: Value 0
1521.46 Historic Log: Value 0
1521.47 Historic Log: Value 0
1521.48 Historic Log: Value 0
1521.49 Historic Log: Value 0
1522.0 Historic Log: Time 0 ms
1522.1 Historic Log: Time 0 ms
1522.2 Historic Log: Time 0 ms
1522.3 Historic Log: Time 0 ms
1522.4 Historic Log: Time 0 ms
1522.5 Historic Log: Time 0 ms
1522.6 Historic Log: Time 0 ms
1522.7 Historic Log: Time 0 ms
1522.8 Historic Log: Time 0 ms
1522.9 Historic Log: Time 0 ms
1522.10 Historic Log: Time 0 ms
1522.11 Historic Log: Time 0 ms
1522.12 Historic Log: Time 0 ms
1522.13 Historic Log: Time 0 ms
1522.14 Historic Log: Time 0 ms
1522.15 Historic Log: Time 0 ms
1522.16 Historic Log: Time 0 ms
1522.17 Historic Log: Time 0 ms
1522.18 Historic Log: Time 0 ms
1522.19 Historic Log: Time 0 ms
1522.20 Historic Log: Time 0 ms
1522.21 Historic Log: Time 0 ms
1522.22 Historic Log: Time 0 ms
1522.23 Historic Log: Time 0 ms
1522.24 Historic Log: Time 0 ms
1522.25 Historic Log: Time 0 ms
1522.26 Historic Log: Time 0 ms
1522.27 Historic Log: Time 0 ms
1522.28 Historic Log: Time 0 ms
1522.29 Historic Log: Time 0 ms
1522.30 Historic Log: Time 0 ms
1522.31 Historic Log: Time 0 ms
1522.32 Historic Log: Time 0 ms
1522.33 Historic Log: Time 0 ms
1522.34 Historic Log: Time 0 ms
1522.35 Historic Log: Time 0 ms
1522.36 Historic Log: Time 0 ms
1522.37 Historic Log: Time 0 ms
1522.38 Historic Log: Time 0 ms
1522.39 Historic Log: Time 0 ms

Page: 18 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1522.40 Historic Log: Time 0 ms

1522.41 Historic Log: Time 0 ms
1522.42 Historic Log: Time 0 ms
1522.43 Historic Log: Time 0 ms
1522.44 Historic Log: Time 0 ms
1522.45 Historic Log: Time 0 ms
1522.46 Historic Log: Time 0 ms
1522.47 Historic Log: Time 0 ms
1522.48 Historic Log: Time 0 ms
1522.49 Historic Log: Time 0 ms
1530.0 Fault Log: Error Code 7
1530.1 Fault Log: Error Code 7
1530.2 Fault Log: Error Code 7
1530.3 Fault Log: Error Code 7
1530.4 Fault Log: Error Code 68
1530.5 Fault Log: Error Code 68
1530.6 Fault Log: Error Code 68
1530.7 Fault Log: Error Code 0
1530.8 Fault Log: Error Code 0
1530.9 Fault Log: Error Code 0
1531.0 Fault Log: Value 0
1531.1 Fault Log: Value 0
1531.2 Fault Log: Value 0
1531.3 Fault Log: Value 0
1531.4 Fault Log: Value 0
1531.5 Fault Log: Value 0
1531.6 Fault Log: Value 0
1531.7 Fault Log: Value 0
1531.8 Fault Log: Value 0
1531.9 Fault Log: Value 0
1532.0 Fault Log: Time 2727944 s
1532.1 Fault Log: Time 2386692 s
1532.2 Fault Log: Time 621876 s
1532.3 Fault Log: Time 135296 s
1532.4 Fault Log: Time 32400 s
1532.5 Fault Log: Time 232 s
1532.6 Fault Log: Time 232 s
1532.7 Fault Log: Time 0 s
1532.8 Fault Log: Time 0 s
1532.9 Fault Log: Time 0 s
1540 FC Type FC-302
1541 Power Section P2K2: 2.20kW
1542 Voltage T5: 3 X 380-500VAC
1543 Software Version 07.26
1544 Ordered Typecode String FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX
1545 Actual Typecode String FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX
1546 Frequency Converter Ordering No131B0038
1547 Power Card Ordering No None
1548 LCP Id No Graphical V 13
1549 SW ID Control Card A07.26 M08.13 D07.24
1550 SW ID Power Card SW:01.02 EE:03.93
1551 Frequency Converter Serial Number
898722G404
1553 Power Card Serial Number 130B6316 389540G404
1558 Smart Setup Filename <None>
1559 CSIV Filename <none>
1560.0 Option Mounted A:X No option
1560.1 Option Mounted B:X No option
1560.2 Option Mounted C0:X No option
1560.3 Option Mounted C1:X No option
1560.4 Option Mounted No option
1560.5 Option Mounted No option

Page: 19 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1560.6 Option Mounted No option

1560.7 Option Mounted No option
1561.0 Option SW Version A:X SW: 00.00
1561.1 Option SW Version B:X SW: 00.00
1561.2 Option SW Version C0:X SW: 00.00
1561.3 Option SW Version C1:X SW: 00.00
1561.4 Option SW Version 00.00
1561.5 Option SW Version 00.00
1561.6 Option SW Version 00.00
1561.7 Option SW Version 00.00
1562.0 Option Ordering No No Info.
1562.1 Option Ordering No No Info.
1562.2 Option Ordering No No Info.
1562.3 Option Ordering No No Info.
1562.4 Option Ordering No No Info
1562.5 Option Ordering No No Info
1562.6 Option Ordering No No Info
1562.7 Option Ordering No No Info
1563.0 Option Serial No No Info.
1563.1 Option Serial No No Info.
1563.2 Option Serial No No Info.
1563.3 Option Serial No No Info.
1563.4 Option Serial No No Info
1563.5 Option Serial No No Info
1563.6 Option Serial No No Info
1563.7 Option Serial No No Info
1580 Fan Running Hours 57 h
1589 Configuration Change Counter 3447
1598 Drive Identification F=1;D=FC-302;B=FC-302;L=FC-302
1599.0 Parameter Metadata 12
1599.1 Parameter Metadata 1541
1599.2 Parameter Metadata 1545
1599.3 Parameter Metadata 1570
1599.4 Parameter Metadata 1571
1599.5 Parameter Metadata 1572
1599.6 Parameter Metadata 1573
1599.7 Parameter Metadata 1574
1599.8 Parameter Metadata 1575
1599.9 Parameter Metadata 1543
1599.10 Parameter Metadata 51
1599.11 Parameter Metadata 11
1599.12 Parameter Metadata 1542
1599.13 Parameter Metadata 1540
1599.14 Parameter Metadata 10
1599.15 Parameter Metadata 13
1599.16 Parameter Metadata 3
1599.17 Parameter Metadata 1553
1599.18 Parameter Metadata 1551
1599.19 Parameter Metadata 831
1599.20 Parameter Metadata 832
1599.21 Parameter Metadata 918
1599.22 Parameter Metadata 1549
1599.23 Parameter Metadata 1560
1599.24 Parameter Metadata 1561
1599.25 Parameter Metadata 2
1599.26 Parameter Metadata 1576
1599.27 Parameter Metadata 1577
1599.28 Parameter Metadata 60
1599.29 Parameter Metadata 61
1599.30 Parameter Metadata 1694
1599.31 Parameter Metadata 0

Page: 20 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1599.32 Parameter Metadata 0

1599.33 Parameter Metadata 0
1599.34 Parameter Metadata 0

Parameter Group: 16-** Data Readouts

ID Name Setup 1 Unit

1600 Control Word 43Chex
1601 Reference [Unit] 0.000 RPM
1602 Reference % 0.0 %
1603 Status Word 607hex
1605 Main Actual Value [%] 0.00 %
1606 Absolute Position 0 None
1609 Custom Readout 0.00 None
1610 Power [kW] 0.00 kW
1611 Power [hp] 0.00 hp
1612 Motor Voltage 0.0 V
1613 Frequency 0.0 Hz
1614 Motor current 0.00 A
1615 Frequency [%] 0.00 %
1616 Torque [Nm] 0.0 Nm
1617 Speed [RPM] 0 RPM
1618 Motor Thermal 0 %
1619 KTY sensor temperature 0 °C
1620 Motor Angle 0
1621 Torque [%] High Res. 0.0 %
1622 Torque [%] 0 %
1623 Motor Shaft Power [kW] 0.00 kW
1624 Calibrated Stator Resistance 0.0000 Ohm
1625 Torque [Nm] High 0.0 Nm
1630 DC Link Voltage 705 V
1632 Brake Energy /s 0.000 kW
1633 Brake Energy Average 0.000 kW
1634 Heatsink Temp. 28 °C
1635 Inverter Thermal 0 %
1636 Inv. Nom. Current 4.80 A
1637 Inv. Max. Current 7.68 A
1638 SL Controller State 0
1639 Control Card Temp. 43 °C
1640 Logging Buffer Full No
1645 Motor Phase U Current 0.00 A
1646 Motor Phase V Current 0.00 A
1647 Motor Phase W Current 0.00 A
1648 Speed Ref. After Ramp [RPM] 0 RPM
1649 Current Fault Source 0
1650 External Reference 0.0
1651 Pulse Reference 0.0
1652 Feedback[Unit] 0.000 RPM
1653 Digi Pot Reference 0.00
1657 Feedback [RPM] 0 RPM
1660 Digital Input 0000000000bin
1661 Terminal 53 Switch Setting Current
1662 Analog Input 53 0.000
1663 Terminal 54 Switch Setting Voltage
1664 Analog Input 54 -0.011
1665 Analog Output 42 [mA] 0.000
1666 Digital Output [bin] 0000bin
1667 Freq. Input #29 [Hz] 0
1668 Freq. Input #33 [Hz] 0
1669 Pulse Output #27 [Hz] 0

Page: 21 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1670 Pulse Output #29 [Hz] 0

1671 Relay Output [bin] 000010000bin
1672 Counter A 0
1673 Counter B 0
1674 Prec. Stop Counter 0
1680 Fieldbus CTW 1 0hex
1682 Fieldbus REF 1 0hex
1684 Comm. Option STW 0hex
1685 FC Port CTW 1 43Chex
1686 FC Port REF 1 0hex
1687 Bus Readout Alarm/Warning 0hex
1689 Configurable Alarm/Warning Word
0hex
1690 Alarm Word 0hex
1691 Alarm Word 2 0hex
1692 Warning Word 0hex
1693 Warning Word 2 0hex
1694 Ext. Status Word 0hex

Parameter Group: 17-** Feedback

ID Name Setup 1 Unit

1770 Absolute Position Display Unit None
1771 Absolute Position Display Scale 0
1772 Absolute Position Numerator 4096
1773 Absolute Position Denominator 1
1774 Absolute Position Offset 0

Parameter Group: 18-** Data Readouts 2

ID Name Setup 1 Unit

1855.0 Active Alarm Numbers 0
1855.1 Active Alarm Numbers 0
1855.2 Active Alarm Numbers 0
1855.3 Active Alarm Numbers 0
1855.4 Active Alarm Numbers 0
1855.5 Active Alarm Numbers 0
1855.6 Active Alarm Numbers 0
1855.7 Active Alarm Numbers 0
1855.8 Active Alarm Numbers 0
1855.9 Active Alarm Numbers 0
1855.10 Active Alarm Numbers 0
1855.11 Active Alarm Numbers 0
1855.12 Active Alarm Numbers 0
1855.13 Active Alarm Numbers 0
1855.14 Active Alarm Numbers 0
1855.15 Active Alarm Numbers 0
1855.16 Active Alarm Numbers 0
1855.17 Active Alarm Numbers 0
1855.18 Active Alarm Numbers 0
1855.19 Active Alarm Numbers 0
1856.0 Active Warning Numbers 0
1856.1 Active Warning Numbers 0
1856.2 Active Warning Numbers 0
1856.3 Active Warning Numbers 0
1856.4 Active Warning Numbers 0
1856.5 Active Warning Numbers 0
1856.6 Active Warning Numbers 0
1856.7 Active Warning Numbers 0
1856.8 Active Warning Numbers 0

Page: 22 of 23
MCT 10 Set-up Software Project -- Untitled Monday, March 07, 2016

1856.9 Active Warning Numbers 0

1856.10 Active Warning Numbers 0
1856.11 Active Warning Numbers 0
1856.12 Active Warning Numbers 0
1856.13 Active Warning Numbers 0
1856.14 Active Warning Numbers 0
1856.15 Active Warning Numbers 0
1856.16 Active Warning Numbers 0
1856.17 Active Warning Numbers 0
1856.18 Active Warning Numbers 0
1856.19 Active Warning Numbers 0
1860 Digital Input 2 0000000000000000bin
1890 Process PID Error 0.0 %
1891 Process PID Output 0.0 %
1892 Process PID Clamped Output 0.0 %
1893 Process PID Gain Scaled Output 0.0 %

Parameter Group: 30-** Special Features

ID Name Setup 1 Unit

3000 Wobble Mode Abs. Freq., Abs. Time
3001 Wobble Delta Frequency [Hz] 5.0 Hz
3002 Wobble Delta Frequency [%] 25 %
3003 Wobble Delta Freq. Scaling Resource
No function
3004 Wobble Jump Frequency [Hz] 0.0 Hz
3005 Wobble Jump Frequency [%] 0 %
3006 Wobble Jump Time 0.001 s
3007 Wobble Sequence Time 10.0 s
3008.0 Wobble Up/ Down Time 5.0 s
3008.1 Wobble Up/ Down Time 5.0 s
3009 Wobble Random Function Off
3010 Wobble Ratio 1.0
3011 Wobble Random Ratio Max. 10.0
3012 Wobble Random Ratio Min. 0.1
3019 Wobble Delta Freq. Scaled 0.0 Hz
3020 High Starting Torque Time [s] 0.00 s
3021 High Starting Torque Current [%]100.0 %
3022 Locked Rotor Protection Off
3023 Locked Rotor Detection Time [s]0.10 s
3024 Locked Rotor Detection Speed Error
25.0[%] %
3080 d-axis Inductance (Ld) 0.000 mH
3081 Brake Resistor (ohm) 186.00 Ohm
3083 Speed PID Proportional Gain 0.0150
3084 Process PID Proportional Gain 0.100

Fault Log :
No Fault Log can be printed out in Basic Version.

Page: 23 of 23