PV Geyser Controller
The Microcare PV Geyser Controller is a locally designed product that uses standard solar panels to power a
common geyser element, outperforming the current range of thermal solar geysers in the market. With no
plumbing required this locally designed innovation is easy to retrofit to any system making it price competitive
at initial outlay and for the lifespan of the system.
Its unique design uses solar panels and not circulating water thus preventing the problems associated with
the old style collectors that suffer from freezing over in winter and boiling over in summer. For any building
the new Microcare PV Geyser Controller is the preferred solution as there is only electric wires to be installed
compared to the long pipes required for traditional solar geysers. There is also no heat loss as water doesn't
need to circulate and therefore no waiting for water to get hot thus reducing waste.
• Uses standard elements
• Out performs solar thermal heaters
• Operates in inclement weather
• Easy installation with no plumbing required
• Designed for a Retrofit
• No need to replace Element or Thermostat
• Low heat dissipation
• Efficiency greater than 95% on solar
• Mains override if no solar is present
• Accurate Digital Temperature Control
• Wall mounted
• External Timer for AC ON/OFF switch included
Product Specifications
Suitable AC Elements 2kW, 3kW & 4kW
Max Input Solar Panel Voltage 275Voc
Min Input Solar Panel Voltage 2kW - 185Voc, 3 & 4kW - 139Voc
Max Input Solar Panel Power 2000W (2kW)
Min Input Solar Panel Power 900W (0.9kW)
Rated AC Input Grid Amps 20A
Rated AC Input Voltage 230V AC
Dimensions 260 x 245 x 75mm
Weight 1.4kg
Warranty 24 months
Microcare recommends 4 x 335W Panels to be installed per Element
Microcare, 15 Swartkops Street, North End, Nelson Mandela Bay, South Africa
Phone: +27 (0)41 453 5761 Email: [email protected] Web: www.microcare.co.za