0% found this document useful (0 votes)
808 views4 pages

Flare Load Summary Report

This document provides a flare load summary, including details of pressure safety valves for various pieces of equipment. It lists the failure scenarios protected against, relief required, relieving conditions, fluid properties, and destination for each pressure safety valve. Simultaneous discharge scenarios from multiple valves are also addressed. The document includes an index and notes section.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
808 views4 pages

Flare Load Summary Report

This document provides a flare load summary, including details of pressure safety valves for various pieces of equipment. It lists the failure scenarios protected against, relief required, relieving conditions, fluid properties, and destination for each pressure safety valve. Simultaneous discharge scenarios from multiple valves are also addressed. The document includes an index and notes section.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

FLARE LOAD SUMMARY Date

FLARE LOAD SUMMARY

Rev Date Description Prepared by Checked by Approved by Company Approval

Page 1/4
FLARE LOAD SUMMARY Date

INDEX

Page Description Revision log Page Description Revision log Page Description Revision log
1 COVER 00
2 INDEX 00
3 NOTES 00
4 PRESSURE SAFETY VALVES DISCHARGE 00
5 BLOW DOWN VALVES DISCHARGE 00
SIMULTANEOUS PRESSURE SAFETY VALVES
6 00
DISCHARGES CASE
SIMULTANEOUS BLOW DWON VALVES
7 00
DISCHARGES CASE

Page 2/4
FLARE LOAD SUMMARY Date

Pressure Safety Valves Discharge

PSV SELECTED RATED RELIEF LOAD RELIEVING CONDITIONS


RELIEF REQUIRED FLUID SPECIFIC GRAVITY LIQUID VISCOSITY BACK PRESSURE BAR
REV FAILURE SCENARIO DEVICE TAG MOL. WT FLARE DESTINATION P&ID Reference REMARKS AND EQUIPMENT PROTECTED
kg/hr VAPOUR LIQUID Set pressure Inlet/outlet T° STATUS LIQUID AT RELIEVING (cP) AT RELIEVING (NOTE 1)
TYPE SIZES
kg/hr kg/hr barg °C

Oil blocked outlet 45910 38,53 / 23,99 2 phase 49,48 0,745 6,39 3,126

AR1602.03-PRO-DRW-
Gas blocked outlet PSV-4000 Conv. 2"H 3" 12740 87,3 38,52 / -2,3 Vapour 19,21 HP flare Test separator releif valve
008 sht 3/21

Fire case 8232 157,3 / 129,9 Vapour 27,3

Oil blocked outlet 45910 38,53 / 23,99 2 phase 49,48 0,745 6,39 3,126

AR1602.03-PRO-DRW-
Gas blocked outlet PSV-4050 Conv. 2"H 3" 12740 87,3 38,52 / -2,3 Vapour 19,21 - - HP flare First stage separator releif valve
008 sht 4/21

Fire case 8232 157,3 / 129,9 Vapour 27,3 - - 1,523

Oil blocked outlet 32310 36,57 / 33,32 2 phase 132,5 4,2

AR1602.03-PRO-DRW-
Gas blocked outlet PSV-4100 Conv. 2"H 3" 1072 30 36,52 / 3,5 Vapour 22,32 HP flare Second stage separator releif valve
008 sht 5/21

Fire case 5144 242,1 / 217 Vapour 46,15 1,497

Gas blocked outlet PSV 4xxx Conv. 1,5"G3" 14770 87,3 42,7/ Vapour 20,64 HP flare TEG Contactor relief valve

Oil blocked outlet 31180 78 / 30,29 2 phase 160,8 3,8 2,2

AR1602.03-PRO-DRW-
Gas blocked outlet PSV-4150 Conv. 3"K4" 987,9 8 31,95 LP flare Third stage separator releif valve
008 sht 6/21

Fire case 8153 132 / 189,5 Vapour 42,18 - - 1,28

PCV 4300 control valve


1588 10,4 / 2,38 Vapour 20,64
failure

Fuel gas scrubber relief valve


AR1602.03-PRO-DRW-
Gas blocked outlet PSV 4300 Conv. 1,5"G 3" 616,7 7 LP flare The PSV size is estimated based on an estimative CV of inlet PCV. PSV shall
008 sht 10/21
be rated after the purshase of the PCV

Fire case 60,3

AR1602.03-PRO-DRW-
Fire case PSV 4700 Conv. 1,5"G 3" 1780 - 7 157,2 / Vapour 32,64 - - LP flare 1,7 Water skimmer relief valve
008 sht 19/21

Notes:
1). Maximum superimposed backpressure allowed on flare header
2). Relief valves shall be rerated after the purshase of equipment
3). TEG relief valve design is done for information only, it shall be checked by the vendor

Page 3/4
FLARE LOAD SUMMARY Date

Blowdown Valves Discharge

VESSEL CONDITIONS INITIAL / FINAL


RELIEF LOAD
CONDITIONS
VAPOUR LIQUID VISCOSITY VAPOUR VISCOSITY BACK PRESSURE BAR
REV FAILURE SCENARIO DEVICE TAG FLUID STATUS LIQUID SPECIFIC GRAVITY FLARE DESTINATION P&ID Reference REMARKS AND EQUIPMENT PROTECTED
VAPOUR LIQUID TEMPERATURE MOL. WT (cP) (cP) (NOTE 1)
PRESSURE (barg)
kg/hr kg/hr (°C)

AR1602.03-PRO-DRW-
Fire case BDV- 4000 10810 - 80 / 7 58,54 / 56,5 Vapour 19,98 HP Flare Test separator Blowdown Valve
008 sht 3/21

AR1602.03-PRO-DRW-
Fire case BDV- 4050 21490 - 80 / 7 38,54 / 49,88 Vapour 19,97 HP Flare First Stage Separator Blowdown Valve
008 sht 4/21

AR1602.03-PRO-DRW-
Fire case BDV- 4100 2047 - 27 / 7 36,59 / 63,93 Vapour 22,23 HP Flare Second Stage Separator Blowdown Valve
008 sht 5/21

AR1602.03-PRO-DRW-
Fire case BDV- 4251 917 - 15 / 7 49,9 / 100 Vapour 32 HP Flare LP Gas Compressor Blowdown Valve
008 sht 8/21

AR1602.03-PRO-DRW-
Fire case BDV- 4272 3662 - 50 / 7 50 / 85 Vapour 26,1 HP Flare MP Gas Compressor Blowdown Valve
008 sht 9/21

Notes:
1). Vessels blow down rates are estimated based on preliminary volumes and shall be updated after the purshase of equipment
2). Compressor blowdown rates are estimated based on typical volumes and shall be updated as per vendor during EPC phase

Page 4/4

You might also like