MADE IN THE USA

DRILLING TOOLS

CATALOG

VER. 5

JEFFREYMACHINE.COM
2 JEFFREYMACHINE.COM
TABLE OF
CONTENTS
HOW TO ORDER.............................................. 6 DERRICK AUGERS
Tungstuds...........................................................................9 & ACCESSORIES
Wear Protection & Laminates..........................................12 Derrick Auger Features & Benefits....................................83
FOUNDATION TOOLS & ACCESSORIES
Rock Augers.....................................................................14
HOW TO ORDER..............................................84
Medium Duty Auger 4 Basic Set-Ups................................85
Pilotless Augers................................................................16
Utility Dirt Tooth Auger....................................................86
Multi-Purpose Augers......................................................17
Medium Duty Bolt-On Carbide Auger...............................87
Crimson Crusher®............................................................18
Medium Duty Bullet Tooth Auger.....................................88
Christmas Tree® Auger.....................................................19
Medium Duty Dragon’s Tooth® Auger..............................89
Pressure Auger.................................................................20
Medium Duty Bolt-On Bullet Tooth Auger........................90
Econo Auger®...................................................................21
Medium Duty Bolt-On Dragon’s Tooth® Auger.................91
Spoon® Auger..................................................................22
Spiral Dragon’s Tooth® Rock Auger..................................92
Dirt Augers.......................................................................23
Hex Couplers, Hubs & Adapters........................................94
Slurry Auger.....................................................................24
Medium Duty Center Heads.............................................95
Casing..............................................................................25
Shank Plates....................................................................96
Casing Twister..................................................................26
Shank Kits........................................................................97
Continuous Flight Augers (CFA’s).....................................28
Twin Helix Auger..............................................................98
Soil Mixing Tool................................................................30
Teeth & Holders................................................................99
Spline Couplers................................................................31
Pilot Bits & Adapters......................................................104
CFA Hex Couplers............................................................32
Kelly Bars.......................................................................106
CFA Threaded Couplers....................................................33
Derrick Core Barrel.........................................................107
Boulder Extractors............................................................34
Auger Reaming Arms.......................................................35
LIGHT DUTY AUGERS
Core Barrels.....................................................................40 & ACCESSORIES
Roller Cone Barrel............................................................42
Light Duty Rock & Dirt Augers........................................108
Core Rings & Custom Plate Rolling..................................44
Light Duty Teeth & Accessories.......................................109
Belling Tool......................................................................45
Light Duty Auger Rack...................................................110
Cross-Cut Core Barrels.....................................................46
Rock Mills........................................................................47
Drilling Buckets................................................................48 ANCHOR PLACEMENT TOOLS
Clean Out Buckets ...........................................................54 6 Bolt Kelly Bar Adapters & Locking Dog.......................112
Drilling Bucket Parts ........................................................56 SS Helical Pier Anchor Drive Tools..................................112
Open Spin Top Bottom Clean Out Buckets.......................60 12 Bolt Kelly Bar Adapters & Locking Dog.....................113
Retrieval Buckets..............................................................61 Drive End Wrenches & Extensions..................................114

ACCESSORIES & WEAR ITEMS

Drive Boxes......................................................................63 PERFORMANCE TEAM SET-UP..............116
Shim Boxes......................................................................69
Teeth................................................................................71 TRUCK ACCESSORIES................................118
Holders.............................................................................74
Teeth & Holders................................................................76 FLIGHTING....................................................... 121
Pilot Bits...........................................................................78
Miscellaneous Parts.........................................................80
JEFFREYMACHINE.COM 3
4 JEFFREYMACHINE.COM
 TOOLS
AVAILABLE
TO RENT
Jeffrey Machine is now offering tools for
rental including augers and core barrels;
from 24” to 120” in diameter. A wide range
of utility tools from 9” to 32” in diameter are
also available through our rental program.
Call a Jeffrey Machine representative today
at 205.841.8600.

Rock & Dirt Augers Belling Tools

FOUNDATION TOOLS
Clean Out Buckets Core Barrels
Casing Twisters Derrick Augers & Parts
Drilling Buckets Continuous Flight Augers

jeffreymachine.com/tool-rental/
Contact a Jeffrey Machine representative today!
JEFFREYMACHINE.COM 5
 HOW TO ORDER
CHOOSE AN AUGER
Available in sizes up to 12’ in diameter. All of our augers are manufactured in house.

ROCK DIRT MULTIPURPOSE CRIMSON CRUSHER

Modification options available on page 7.

SELECT AUGER TYPE

Jeffrey Machine is proud to be the “go-to” manufacturer for high quality custom-built augers. There are six basic types
of spiral augers.

TYPE 1 TYPE 2 TYPE 3

Double Cut, Double Cut, Double Cut,
Double Flight Double Flight Double Flight

TYPE 4 TYPE 5 TYPE 6

Double Cut, Double Cut, Double Cut,
Double Flight Double Flight Double Flight
6 JEFFREYMACHINE.COM
 HOW TO ORDER
SELECT YOUR MODIFICATIONS
There are hundreds of modifications that can be made to specifically fit your application.

DRIVE BOXES
Fabricated steel boxes are available in a variety of
sizes. Manufactured in-house, drive boxes are rated
for maximum rotational torque & pull-out force.
SEE PAGE 63.

CENTER SHAFT
Available from 4” OD to 13” OD.

FLIGHTING
There are multiple variants to choose from including
• Outside Diameter • Thickness
• Pitch • Right or Left Handed
• Inside Diameter
FOR MORE INFO, SEE PAGE 121.

TEETH & HOLDERS

For a list of all teeth and holders available,
SEE PAGE 71.

PILOTS, ADAPTERS, AND HUBS

For a list of all available, SEE PAGE 78.

ADD-ON FEATURES
Additional features to add-on for even more customization.

WEAR PROTECTION LAMINATES

Wear Pads LEARN MORE ON PAGE 13.

& Carbide Studs
Fully Hard
Surface
REAMING ARMS
Full Hard Surface
Outer Edge LEARN MORE ON PAGE 35.

LEARN MORE ON PAGE 12.

Custom orders cannot be refunded, canceled, or returned for any reason. JEFFREYMACHINE.COM 7
8 JEFFREYMACHINE.COM
TUNGSTUDS
Tungstuds by Betek reduce wear over time due to the carbide core. Tungstuds are
easy to install & quick to replace.

1/2” (12mm) 1/2” (12mm)

1/4” (7mm) 1/4” (7mm)

5/16” (8.4mm)

7/16” (11.4mm)
9/16” (14mm)*
7/16” (11mm)

5/8” (16mm)

3/4” (19mm)
5/8” (16mm)
5/8” (16mm)

BTS01 BTS02

9/16” (15mm)
3/8” (9mm) 9/16” (15mm)
3/8” (9mm)
5/16” (8.4mm)
7/16” (11mm)*

5/8” (16mm)

7/16” (12mm)
9/16” (14mm)*

3/4” (19mm)

3/4” (19mm)

3/4” (19mm)

BTS03 BTS04

11/16” (18mm) 11/16” (18mm) FOUNDATION TOOLS

1/2” (12.60mm) 1/2” (12.60mm)
5/16” (8.4mm)
7/16” (11mm)*

9/16” (14mm)*

1/2” (12mm)
5/8” (16mm)

3/4” (19mm)

7/8” (22mm)
7/8” (22mm)

BTS05 BTS06
*Height after welding.

JEFFREYMACHINE.COM 9
 11/16” (18mm) 3/4” (19mm)
1/2” (12.6mm)

3/8” (10mm)
9/16” (13.5mm)*

3/4” (18.5mm)
11/16” (17mm)*

9/16” (14mm)
7/8” (22mm)
7/8” (22mm)

7/8” (22mm)

BTS07 BTS08

5/8” (16mm)
1/2” (12mm) 1/2” (12.8mm)
5/16” (7.5mm)*

1/4” (6mm)
7/16” (11mm)

1/2” (12.5mm)
1/2” (13mm)

11/16” (18mm)

5/8” (16mm)

9/16” (15mm)

BTS10B BTS20

5/8” (15.6mm)
1/2” (13.3mm)
9/16” (14mm)*

13/16” (20.9mm)

3/4” (19mm)

BTS100

*Height after welding.

10 JEFFREYMACHINE.COM
 FOUNDATION TOOLS

JEFFREYMACHINE.COM 11
 WEAR PROTECTION
Wear Protection can greatly increase the life of your drilling tools. Whether adding
any of these options to a new auger or having Jeffrey Machine refurbish your used
tool, it’s a great way to protect your investment.

WEAR PADS
These have become
extremely popular as they
offer extra wear protection.
When they do start to wear
down, it’s a simple task
to weld a new pad in the
available space beside it.

CARBIDE STUDS
Also known as tungstuds can be
applied to any surface to add wear
protection. Fast and easy to install
carbide studs will add an adequate
amount of wear protection
extending the life of your tooling.
Reference pg. 9-10.

FULL HARD SURFACE

OUTER EDGE
Adding hard surface welding
wire to the outside edge of your
tooling will extend the life of
your auger, (Most popular on
dirt augers.)

FULLY HARD SURFACE

Our Fully Hard Surface option
increases your protection even
further by adding an extra 1” of
wire to the top and bottom side
of the auger flighting.

12 JEFFREYMACHINE.COM
LAMINATES
Laminates have been added to all of our 30” and larger heavy
duty rock augers. (Optional for dirt augers) FOUNDATION TOOLS
Laminates greatly increase the strength of flighting for crowd (pushing down),
torque (twisting) and load (pulling heavy spoil up out of the ground). Jeffrey Machine
has developed a reputation for building the highest quality augers in the industry.
Laminates are just one more enhancement to insure our augers hold up to the ever
increasing power of modern drilling rigs.

JEFFREYMACHINE.COM 13
 ROCK AUGER

➋
All flights are double
beveled for better
weld penetration.

➊ Bevel with weld

➋ Bevel pre-weld

COMPATIBLE PILOTS
COMPATIBLE
PILOT ADAPTERS

RP-4 Machined Pilot .990 Dragon’s Tooth® Pilot Cast 2-1/2” SQ Pilot Adapter 177mm x 100mm FM Adapter
P/N 40285 P/N 40205 P/N 42040 P/N 42080

14 JEFFREYMACHINE.COM
COMPATIBLE DRIVE BOXES
P/N 43525 3” Kelly Drive Box P/N 43695 150mm Kelly Drive Box
P/N 43535 3-1/2” Kelly Drive Box P/N 43615 7” Kelly Drive Box
P/N 43545 4” Kelly Drive Box P/N 43670 200mm Standard Tall 18”
P/N 43555 4-1/4” Kelly Drive Box P/N 43671 200mm Standard Short 18’’
P/N 43680 4-1/2” Kelly Drive Box P/N 43676 200mm HD Tall 18’’
P/N 43560 5” Kelly Drive Box P/N 43677 200mm HD Short 18’’
P/N 43575 5-1/4” Kelly Drive Box P/N 43679 200mm HD Tall Deep 21.5”
P/N 43595 130mm Kelly Drive Box P/N 43678 200mm Standard Tall Deep 21.5’’
P/N 43600 6” Kelly Drive Box

38MM TEETH & HOLDERS

38mm TEETH (Only compatible with 38mm Holders)

38mm Dragon’s Tooth® BKH113 B47K22-H BFZ 100X70/2

P/N 30188 P/N 30225 P/N 30212 P/N 34172

B47K19H B47K19L 55-1S/C4-1

P/N 30162 P/N 30182 P/N 30242

38mm HOLDERS (Only compatible with 38mm Teeth)

38mm Dragon’s Tooth® Holder 38mm Tri-Holder JM-48 Holder
P/N 32058 P/N 32064 P/N 32061

JM-43 Holder 38mm Jeff444 Tri-Holder

P/N 32050 P/N 32102

.990 TEETH & HOLDERS

.990 TEETH (Compatible with .990 Holders) FOUNDATION TOOLS
.990 Dirt Tooth .990HB .990 Dragon’s Tooth® B40 HDS
P/N 34380 P/N 30122 P/N 30145 P/N 30155

.990 HOLDERS (Compatible with .990 Teeth)

.990 Dragon’s Tooth® Holder .990 Tri-Holder JM C-30 Holder
P/N 32049 P/N 32042 P/N 32040

.990 Jeff444 Tri-Holder

P/N 32104

JEFFREYMACHINE.COM 15
 PILOTLESS AUGER

PILOTLESS AUGER SPECIFICATIONS

Commonly Requested Diameters: 14"– 144"* .990HB B47K19L
Type: Type 6 P/N 30122 P/N 30182

Cut: DC/DF
Kelly boxes: All kelly boxes made to customer specifications
.990 Dragon’s Tooth® 38mm Dragon’s Tooth®
Center Shaft: 6” OD – 8” OD P/N 30145 P/N 30188
Flight: 1” – 2” thickness available
All flight ID is beveled for better weld penetration .990 Tri-Holder 38mm Tri-Holder
Laminate flight on all augers 30” or larger P/N 32042 P/N 32064

Wear Protection: Wear Pads 2” x 3” x 1/2” (39302) All .990 and 38mm rock augers are manufactured with Tri Holders.
Smaller conical teeth available upon request.
* Smaller diameters available based on Kelly box size / custom sizes greater than 144”

16 JEFFREYMACHINE.COM
MULTI-PURPOSE AUGER
Optimize your drilling tool fleet with the multi-purpose auger. This auger can
be utilized as a dirt or rock auger simply by switching out the tooth & pilot
combinations.
Standard

48”
Max Cut Multi-Purpose Tool
Conical Tooth

Dirt

MULTI-PURPOSE AUGER SPECIFICATIONS

Commonly Requested Diameters: 16"– 144"*
Type: Type 3 - 6
Cut: DC/DF
48”
Kelly boxes: All kelly boxes made to customer specifications Max Cut Tool
Switching Teeth Converts
Center Shaft: 4” OD – 12” OD (Solid shaft available in some sizes) Conical Tooth Rock Auger
to Dirt Auger
Flight: 1” – 2” thickness available
All flight ID is beveled for better weld penetration
Laminate flight on all augers 30” or larger
Wear Protection: Wear Pads 2” x 3” x 1/2” (39302) Overcut

FOUNDATION TOOLS
* Smaller diameters available based on Kelly box size / custom sizes greater than 144”

B47K19L 38mm Tri-Holder

ROCK

P/N 30182 P/N 32064

RP-4 Machined Pilot

P/N 40285
48”
Max Cut Tool

JMI 113×70/D BFZ 100×70/2

P/N 34241 P/N 34172
DIRT

Switch Gauge Tooth to

4” SQ. JM 8” Dirt Pilot BFZ Shovel Tooth to
38mm Tri-Holder
Overcut 1 1/2”
P/N 32064 P/N 40260
Adding 3” to Hole Diameter

JEFFREYMACHINE.COM 17
 CRIMSON CRUSHER® AUGER

CRIMSON CRUSHER®
SPECIFICATIONS
Commonly Requested Diameters: 18"– 144"
Type: 1 – 3
Cut: DC/DF or SC/SF
Kelly boxes: All kelly boxes made to customer specifications
Center Shaft: 4” OD – 12” OD (Solid shaft available in some sizes)
Flight: 1” – 2” thickness available
All flight ID is beveled for better weld penetration
Laminate flight on all augers 30” or larger

.990HB 55-1S / C4-1

P/N 30122 P/N 30242

JM C-30 Holder JM-43 Holder

P/N 32040 P/N 32050

18 JEFFREYMACHINE.COM
CHRISTMAS TREE® AUGER

CHRISTMAS TREE® AUGER

SPECIFICATIONS
Commonly Requested Diameters: 24"– 60"
Type: Christmas Tree
Cut: DC/DF or SC/SF
Kelly boxes: All kelly boxes made to customer
specifications
Center Shaft: 4” OD – 12” OD (Solid shaft available in some sizes)
Flight: 1” – 2” thickness available
All flight ID is beveled for better weld penetration
Laminate flight on all augers 30” or larger FOUNDATION TOOLS

.990HB 55-1S / C4-1

P/N 30122 P/N 30242

JM C-30 Holder JM-43 Holder

P/N 32040 P/N 32050

JEFFREYMACHINE.COM 19
 PRESSURE AUGER

PRESSURE AUGER
SPECIFICATIONS
Standard Height: 36”– 42”
Commonly Requested Diameters: 24”– 60”
Type: Types 4 – 6 .990HB .990 Dirt Tooth
P/N 30122 P/N 34380
Cut: DC/DF or SC/SF
Kelly boxes: 3” - 4” box .990 Dragon’s Tooth® .990 Tri-Holder
P/N 30145 P/N 32042
Center Shaft: 4” OD – 8” OD (Solid shaft available in some sizes)
Flight: 1” thickness available
All flight ID is beveled for better weld penetration JM C-30 Holder
P/N 32040
Laminate flight on all augers 30” or larger

20 JEFFREYMACHINE.COM
ECONO AUGER®

ECONO AUGER® FOUNDATION TOOLS

SPECIFICATIONS
Commonly Requested Diameters: 18"– 60"
.990HB 55-1S / C4-1
Type: 4 & 5 P/N 30122 P/N 30242
Cut: DC/DF
Kelly boxes: All kelly boxes made to customer specifications JM C-30 Holder JM-43 Holder
P/N 32040 P/N 32050
Center Shaft: 4” OD – 6” OD (Solid shaft available in some sizes)
Flight: 1” thick flights only
All flight ID is beveled for better weld penetration

JEFFREYMACHINE.COM 21
 SPOON® AUGER

Closed
Standard

Open

Standard

Closed
Overcut

Open

Overcut

Spoon® Augers are best used in applications when overhead space is restricted. Flaps increase the ability to hold loose
spoil on the auger flights preventing material from falling back into the shaft. If you have questions regarding the spoon
or bow tie augers, please contact a Jeffrey Machine Inc. representative.

22 JEFFREYMACHINE.COM
DIRT AUGERS Side skirt options
available

SC/SF

DC/SF

Flight stiffener options available

SC/SF

45º

DIRT AUGER SPECIFICATIONS

101 Dirt Tooth WO1 Holder FOUNDATION TOOLS
Commonly Requested Diameters: 14"– 144"* P/N 34070 P/N 36000
Type: Type 6
201 Dirt Tooth WO-5 Holder
Cut: DC/DF, DC/SF, SC/SF P/N 34100 P/N 36010
Kelly boxes: All kelly boxes made to customer specifications
Center Shaft: 4” OD – 12” OD (Solid shaft available in some sizes) 2.5” SQ. JM-08
211 Dirt Tooth Dirt Pilot
Flight: 1” – 2” thickness available P/N 34110 P/N 40470
All flight ID is beveled for better weld penetration
Wear Protection: Hard Surface Outer Edge
4” SQ. JM 8“ 4” SQ. JM 12“
Dirt Pilot Dirt Pilot
* Smaller diameters available based on Kelly box size / custom sizes greater than 144” P/N 40260 P/N 40264

JEFFREYMACHINE.COM 23
 SLURRY AUGER

4 gallon square buckets

weighing 22 pounds
per bucket

POLY-BORE
POLY-BORE polymer is a free flowing,
water-soluble, easy mixing, 100% dry
granular polymer. When mixed with fresh
water, a small quantity of POLY-BORE
polymer provides a clear, solid-free, viscous
borehole stabilizing fluid for use in drilled
shaft, auger drilling, horizontal directional
boring, trenching excavation and reverse
circulation (RC) rotary drilling. POLY-BORE
polymer is not designed to be used in
conjunction with bentonite-based fluids.
P/N 799-7004

EZ-MUD
EZ-Mud is a clay and shale stabilizer
provides inhibition of clay and shale
formations in water-based drilling fluids
without substantially increasing viscosity.
EZ-MUD GOLD stabilizer, when added to a
QUIK-GEL® or BORE-GEL® slurry, yields
SLURRY AUGER an inhibitive drilling fluid system while
SPECIFICATIONS maintaining manageable and effective fluid
Standard Height: 24”-96” properties. EZ-MUD GOLD stabilizer can
Commonly Requested Diameters: 24”– 60” be mixed easily at minimal shear thereby
eliminating the need for liquid emulsions.
Type: Types 5 – 6 P/N T799-2000
Cut: DC/DF or SC/SF
Kelly boxes: All Kelly boxes made to customer specifications
QUIK-GEL
Center Shaft: 14” – 24”
Quik-Gel is a viscosifier is an easy-to-mix,
Flight: 1” to 1-1/2” thick available
finely ground (200-mesh), premium-grade,
Wear Protection: Hard Surface outside edge or high-yielding Wyoming sodium bentonite.
fully hard surface QUIK-GEL viscosifier imparts viscosity, fluid
loss control and gelling characteristics to
freshwater-based drilling fluids.
201 Dirt Tooth WO-5 Holder
P/N 34100 P/N 36010 P/N T799-1000

24 JEFFREYMACHINE.COM
CASING

Casing Driver

Casing

FOUNDATION TOOLS
CJ2 Holder CJ2 Tooth
CASING CAPABILITIES P/N 36070 P/N 34220
Inner Diameters: 22”- 144”
Wall: 3/8” - 1” thick available

3/4” Hex Weld Bars 1 1/8” Hex Weld Bars 1 3/8” Hex Weld Bars
P/N 34350 P/N 34340 P/N 34330

Custom sizes available.

JEFFREYMACHINE.COM 25
 CASING TWISTERS

2 Way Adjustable
Casing Twister with
5” OD Solid Arms*
• 2 Way 30” - 42”
• 2 Way 48” - 72”
• 2 Way 78”-122”
*Other sizes and 4 way are available.

Exploded View

26 JEFFREYMACHINE.COM
 4 Way Adjustable
Casing Twister with
5” OD Solid Arms**
• 4 Way 30” - 42”
• 4 Way 48” - 72”
• 4 Way 78”-122”
**Other sizes and 2 way are available.

4-Way Adjustable Casing Twister Ratings

30”- 42” 48”- 72” 78”- 122”
Maximum Torque Maximum Torque Maximum Torque
Extended Retracted Extended Retracted Extended Retracted
200,000ft-lbs. 425,000ft-lbs. 485,714ft-lbs. 485,714ft-lbs. 485,714ft-lbs. 680,000ft-lbs.
Maximum Lift Maximum Lift Maximum Lift
Extended Retracted Extended Retracted Extended Retracted
308,108lbs. 737,864lbs. 182,138lbs. 760,000lbs. 126,666lbs. 950,000lbs.

von Mises (psi)

80,456
72,411
64,365
FOUNDATION TOOLS
COLOR KEY

56,319
P.E. certified ratings include
48,274 but are not limited to
40,228 computer simulated torque
and lifting analysis. These
32,183
simulations allow our
24,137 engineers and designers to
16,091 identify and improve upon
higher stress areas in our
8,046
tools to ensure maximum
0 production and safety.

Yield Strength: 85,000

Jeffrey Machine Casing Twisters are *PE Certified.

JEFFREYMACHINE.COM 27
 CONTINUOUS FLIGHT
AUGERS (CFA’S)

28 JEFFREYMACHINE.COM
 FOUNDATION TOOLS
CFA SPECIFICATIONS
Commonly Requested Diameters: 8"– 48" * SIZE 42 CORK
P/N 39200
Cut: DC/DF, DC/SF, SC/SF
Grout Port: Side discharge SIZE 44 CORK
P/N 39201
Type: 3, 4, 5, 6
Connections: SIZE 46 CORK
P/N 39202
• Spline & Hex Couplers
• API & ACME Threaded Couplers SIZE 48 CORK
P/N 39203
Cutter Head Length: 5', 10', 20'
Flight Body: 5’, 10’, 20’
Wear Protection or Hard Surface Options Available. SEE PAGE 12
* Custom sizes available upon request. JEFFREYMACHINE.COM 29
 SOIL MIXING TOOL
Shown as a 3-blade soil mixing tool.

Static Central
Stabilizer
NOTE: Soil Mixing blades &
supports are made from A514 /
T1 material for increased wear,
durability, and long-lasting strength.
(A514 T1 - 110,000 -130,000 psi
Tensile Strength)

Fixed Central
Stabilizer

SOIL MIXING TOOL SPECIFICATIONS

Commonly Requested Diameters: 18"– 144” *
Drive Connections: Specified by customer
Combination of dirt teeth and dirt pilots 38mm Tri-Holder BFZ 100X70/2
available. P/N 32064 P/N 34172

X295 Holder X295 Tooth

* Custom sizes greater than 144” available upon request. P/N 36105 P/N 34405

30 JEFFREYMACHINE.COM
SPLINE COUPLERS
Coupler Assembly Maximum Torque Maximum Pull-Out Force
9.250in Spline Coupler 130,000 ft-lbs 1,040,000 lbs
11.000in Spline Coupler 262,000 ft-lbs 1,160,000 lbs
14.000in Spline Coupler 672,000 ft-lbs 1,550,000 lbs

9.25” Spline Coupler Set

Max. Torque: 130,000 ft-lbs
Max. Pull-Out Force: 1,040,000 lbs
P/N 27920

9.25” Spline O Ring

& Set Screw Kit
P/N 27925

11” Spline Coupler Set

Max. Torque: 262,000 ft-lbs
Max. Pull-Out Force: 1,160,000 lbs
P/N 27930

11” Spline O Ring

& Set Screw Kit
P/N 27935

14” Spline Coupler Set

Max. Torque: 672,000 ft-lbs
Max. Pull-Out Force: 1,550,000 lbs
P/N 27940
FOUNDATION TOOLS
14” Spline O Ring
& Set Screw Kit
P/N 27945

Jeffrey Machine manufactures CFA Spline Couplers, CFA Hex Couplers, ACME Threaded Couplers as
well as API Couplers. We operate state-of-the-art machines at our Birmingham facility to provide a
timely source of supply. This enables us to make customer requested modifications.

*Male/female sold separately upon request. *PE Certified

JEFFREYMACHINE.COM 31
 CFA HEX COUPLERS
Couplers and adapters are manufactured in-house to any shape or design required.

Coupler Assembly Maximum Torque Maximum Pull-Out Force

80mm Hex Coupler 19,300 ft-lbs 96,400 lbs
120mm Hex Coupler 65,000 ft-lbs 217,000 lbs
150mm ABI Hex Coupler 263,000 ft-lbs 805,000 lbs
160mm Hex Coupler 154,000 ft-lbs 386,000 lbs
200mm Hex Coupler 292,000 ft-lbs 560,000 lbs
80mm Hex Coupler Set
Torque: 19,300 ft-lbs
Max. Pull-Out Force: 96,400 lbs
P/N 27500
80mm Hex Locking Pin Set
P/N 27530

120mm Hex Coupler Set

Torque: 65,000 ft-lbs
Max. Pull-Out Force: 217,000 lbs
P/N 27570

120mm Hex Locking Pin Set

P/N 27600

150mm ABI Hex Coupler Set

Torque: 263,000 ft-lbs
Max. Pull-Out Force: 805,000 lbs
P/N 27850

150mm Hex Locking Set Screw

P/N 27853

160mm Hex Coupler Set

Torque: 154,000 ft-lbs
Max. Pull-Out Force: 386,000 lbs
P/N 27640
160mm Hex Locking Pin Set
P/N 27670

200mm Hex Coupler Set

Torque: 292,000 ft-lbs
Max. Pull-Out Force: 560,000 lbs
P/N 27710

200mm Hex Locking Pin Set

P/N 27740 *PE Certified

32 JEFFREYMACHINE.COM
THREADED COUPLERS
FOR CFA
Couplers and adapters are manufactured in-house to any shape or design required.

3” ACME Threaded Coupler Set

P/N 27430

FOUNDATION TOOLS
4” ACME Threaded Coupler Set
P/N 27400

Other sizes available.

All Jeffrey Machine couplers are manufactured from alloy steel material for increased strength,
weldability, and machinability. Due to the high carbon content of this alloy steel, special welding
procedures are required to minimize cracks in the heat affected zones. Please contact your Jeffrey
Machine Representative today if you have any questions regarding this procedure or would like any
further information in reference to our extensive line of couplers.

JEFFREYMACHINE.COM 33
 BOULDER EXTRACTORS
46” Boulder Extractor
with Scraper

36” Boulder Extractor

with .990

36” Boulder Extractor

Pitched

BOLDER EXTRACTOR SPECIFICATIONS

Commonly Requested Diameters: 16"– 144"
Kelly boxes: All kelly boxes made to customer
specifications
Flight Thickness: 1½"
Options:
• Pitched or Flat
• Rock or Dirt Pilot Optional

34 JEFFREYMACHINE.COM
AUGER HD REAMING ARMS
3” reaming arms increase the max total cut by 6” total. 6” reaming arms increase the
max total cut by 12” total. Only available for augers 72” and larger.

When the over cuter arm is set at the inner most

adjustment the outside tooth will be cutting at the
same diameter as the max cut of the auger.

No extension
6” HD 38mm Rock
P/N 39354P

When the over cutter arm is set at the center

adjustment the outside tooth will be cutting
at 3” over the max cut of the auger. This will add
6” to the overall diameter of the auger.

Increases max cut by 6”

6” HD 38mm Rock
P/N 39354P

FOUNDATION TOOLS
When the over cutter arm is set at the center
adjustment the outside tooth will be cutting
at 6” over the max cut of the auger. This will add
12” to the overall diameter of the auger.

Increases max cut by 12”

6” HD 38mm Rock
P/N 39354P

JEFFREYMACHINE.COM 35
 AUGER STANDARD
REAMING ARMS
Available for augers 30” or larger diameter.

3” Flat .990 Rock Reaming

Arm W/ Hardware
P/N 39380 A

3” Flat 38mm Rock

Reaming Arm W/ Hardware
P/N 39383

3” Flat Dirt Tooth Reaming

Arm W/ Hardware
P/N 39386

36 JEFFREYMACHINE.COM
 Kit includes: Reaming arm,
bracket, and mounting hardware

6” Flat .990 Rock Reaming

Arm W/ Hardware
P/N 39381

6” Flat 38mm Rock

Reaming Arm W/ Hardware
P/N 39384

FOUNDATION TOOLS

6” Flat Dirt Tooth Reaming

Arm W/ Hardware
P/N 39387
JEFFREYMACHINE.COM 37
38 JEFFREYMACHINE.COM
CORE BARRELS
& BUCKETS

WE MANUFACTURE OUR
CORE BARRELS AND
BUCKETS ANY WAY YOU
WANT.
Although our factory has
grown in size, we still
maintain a machine shop
mentality where every order is
considered custom. As we’ve
grown we’ve invested heavily
in top-of-the-line machinery.
These tools help us craft high
quality solutions individually
suited to our customers’ needs
on a timely basis.
By manufacturing everything
in-house we have complete
control of all aspects of design,
quality, and cost.
FOUNDATION TOOLS

JEFFREYMACHINE.COM 39
 CORE BARRELS
Barrels over 60” are built with cross tops.

Top View

96” MC Core Barrel

CORE BARREL SPECIFICATIONS

Commonly Requested Diameters: 16"– 156"
Kelly boxes: All kelly boxes made to customer specifications
Gussets: 1" thick gussets standard
Barrels:
• Up to 2" thick
• 2" undersize (.990 teeth)
• 3" undersize (38mm teeth)
.990 JeffCut® B40HDS .990HB
Height specified by customer Holder with: .990 Dragon’s Tooth®

Wear Protection: Available upon request

Hardened holders available upon request.

38mm JeffCut® 38mm Dragon’s Tooth® BKH113 B47K22-H B47K19L B47K19H
Holder with:

Custom sizes greater than 156” available upon request.

40 JEFFREYMACHINE.COM
 Layout Pattern Options:
3 TOOTH

5 TOOTH

48” MC Core Barrel

Top View

7 TOOTH
FOUNDATION TOOLS

JEFFREYMACHINE.COM 41
 ROLLER CONE BARREL
Best used on rock conditions over 14,500 psi.
Recommended minimum crowd is 10,000 lb. per roller.

Quick Change 2 Bolt Roller Cone

P/N 39505

Quick Change 2 Bolt Roller Cone Holder

P/N 39506

ROLLER CONE BARREL SPECIFICATIONS

Commonly Requested Diameters: 16"– 144"
Kelly boxes: All kelly boxes made to customer specifications
Gussets: 1" thick gussets standard
Barrels: Up to 2" thick
Height specified by customer

42 JEFFREYMACHINE.COM
 FOUNDATION TOOLS

JEFFREYMACHINE.COM 43
 CORE RINGS &
CUSTOM PLATE ROLLING

CORE RINGS SPECIFICATIONS

Replacement core rings are available upon request, or can be ordered as a
separate item. All core rings are quoted as a minimum of 12” overall height.
Specifications needed to quote
• Max Cut requirement
• OD of existing barrel
• Tooth pattern: 3, 5, or 7
• Thickness of ring
Custom Plate Rolling
• A-36 rated steel plate standard
• OD x ID x W Specifications needed to quote
• Diameters: 24” – 156”
• Thickness: up to 2” thick mild steel

44 JEFFREYMACHINE.COM
BELLING TOOL
NOMINAL SIZE
Dia. Bell Dia. Angle
12 36 45º or 60º
14 42 45º or 60º
16 48 45º or 60º
18 54 45º or 60º
20 60 45º or 60º
24 72 45º or 60º
30 90 45º or 60º
36 108 45º or 60º
42 126 45º or 60º
48 144 45º or 60º
54 162 45º or 60º
60 180 45º or 60º
66 198 45º or 60º

72 216 45º or 60º

Belling tool wings & wing supports are made from A514 / T1 material for increased wear, durability, and
long-lasting strength. (A514 T1 - 110,000 -130,000 psi Tensile Strength)

BELLING TOOL SPECIFICATIONS

Available sizes: 12"–72"
Wings:
• 3:1 ratio of cylinder
• 45 or 60 degree
• T1 Material
Most Commonly Used Teeth:
• .990 series
• 201 dirt teeth
FOUNDATION TOOLS
201 Dirt Tooth .990 Dragon’s Tooth®
P/N 34100 P/N 30145

.990 Dirt Tooth .990HB

P/N 34380 P/N 30122

B40 HDS
P/N 30155
*Barrel diameters are actual sizes.

Replacement dump mechanism parts available. Ref. Page 56 for more information.
JEFFREYMACHINE.COM 45
 CROSS-CUT CORE BARRELS

48” Cross-Cut 96” Cross-Cut

Core Barrel Core Barrel

Cross-Cut cutter bars are made from

82” Cross-Cut
A514 / T1 material for increased Core Barrel
wear, durability, and long-lasting
strength. (A514 T1 - 110,000
-130,000 psi Tensile Strength)

CROSS-CUT CORE BARREL SPECIFICATIONS B47K19L 55-1S / C4-1

P/N 30182 P/N 30242
Commonly Requested Diameters: 20"– 144"
Kelly boxes: All kelly boxes made to customer specifications 38mm Dragon’s Tooth® Holder
P/N 32058
Gussets: 1" thick gussets standard
Barrels: .990 Dragon’s Tooth®
• Up to 2" thick P/N 30145
• 2" undersize (.990 teeth)
• 3" undersize (38mm teeth) .990 Dragon’s Tooth® Holder
P/N 32049
Cutter Bar: .990 or 38mm options available
Cutter Bar Material: A514 T1 (110,000- 130,000 psi Tensile Strength)
Height specified by customer
Wear Protection: Available upon request

.990 JeffCut®
TEETH & HOLDERS Holder with: B40HDS .990HB .990 Dragon’s Tooth®
FOR OUTSIDE DIAMETER

38mm JeffCut® 38mm Dragon’s Tooth® BKH113 B47K22-H B47K19L B47K19H

Holder with:

Custom sizes greater than 144” available upon request.

46 JEFFREYMACHINE.COM
ROCK MILLS

ROCK MILL
SPECIFICATIONS
Diameters: 24"–144"
Ring: 1" thick
Cutter Bar: 4140 Annealed
(95,000 psi Tensile Strength)
Teeth: Double row configuration:
.990HB B47K19L • .990 Standard (30122)
P/N 30122 P/N 30182 • 38mm B47K19LK80-H (30182)
Wear Protection:
2" x 3" x ½” wear pads (39302)

FOUNDATION TOOLS

Machined cutter bars for our Rock

Mills are manufactured from 4140
Annealed material for increased
strength and machinability. (4140
Annealed - 95,000 psi Tensile
Strength)

JEFFREYMACHINE.COM 47
 SINGLE OPEN DIRT
DRILLING BUCKET

Arrowhead Exploded View

Bottom View
J-Hook

SINGLE OPEN DIRT DRILLING BUCKET

SPECIFICATIONS
Recommended Diameters: 24”– 60”
Kelly boxes: All kelly boxes made to customer specifications 201 Dirt Tooth WO-5 Holder
Barrels: Cylinders up to 2” wall available P/N 34100 P/N 36010

Barrels undersized to meet max cut specifications

Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and pin-on
options. 2.5” SQ. JM-08 Dirt Pilot 4” SQ. JM 8” Dirt Pilot
P/N 40470 P/N 40260
Dump Bottom System (Auto or Manual)
Custom sizes greater than 144” available upon request.

48 JEFFREYMACHINE.COM
DOUBLE OPEN DIRT
DRILLING BUCKET

Exploded View

Bottom View

Arrowhead Single Arrowhead Double J-Hook Single J-Hook Double

DOUBLE OPEN DIRT DRILLING BUCKET

FOUNDATION TOOLS
SPECIFICATIONS
Recommended Diameters: 60” – 144”
Kelly boxes: All kelly boxes made to customer specifications 201 Dirt Tooth WO-5 Holder
Barrels: Cylinders up to 2” wall available P/N 34100 P/N 36010

Barrels undersized to meet max cut specifications

Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and pin-on
options.
2.5” SQ. JM-08 Pilot 4” SQ. JM 8” Dirt Pilot
Dump Bottom System (Auto or Manual) P/N 40470 P/N 40260
Custom sizes greater than 144” available upon request. *Not all drive boxes available on all sizes. Please contact us to
find out if a particular drive box will fit in this application.
Double dump mechanism recommended on barrels 100” diameter and greater.
JEFFREYMACHINE.COM 49
 SINGLE OPEN ROCK
DRILLING BUCKET

Bottom View
Exploded View

Arrowhead J-Hook Manual

.990HB B47K19L
SINGLE OPEN ROCK DRILLING BUCKET P/N 30122 P/N 30182
SPECIFICATIONS
Recommended Diameters: 24” – 60” 38mm Dragon’s Tooth®
.990 Dragon’s Tooth®
Kelly boxes: All kelly boxes made to customer specifications P/N 30145 P/N 30188

Barrels: Cylinders up to 2” wall available

Barrels undersized to meet max cut specifications .990 Tri-Holder 38mm Tri-Holder
P/N 32042 P/N 32064
Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and pin-on
options. 2.5” SQ. .990 Pilot RP-4 Machined Pilot
P/N 40205 P/N 40285

Dump Bottom System (Auto or Manual)

BFZ 100X70/2
P/N 34172
50 JEFFREYMACHINE.COM
 DOUBLE OPEN
ROCK DRILLING BUCKET

Exploded View

Arrowhead Single Arrowhead Double J-Hook Single J-Hook Double

Bottom View

.990HB B47K19L
DOUBLE OPEN ROCK DRILLING BUCKET P/N 30122 P/N 30182

FOUNDATION TOOLS
SPECIFICATIONS
Recommended Diameters: 60” – 144”
.990 Dragon’s Tooth® 38mm Dragon’s Tooth®
Kelly boxes: All kelly boxes made to customer specifications P/N 30145 P/N 30188
Barrels: Cylinders up to 2” wall available
Barrels undersized to meet max cut specifications .990 Tri-Holder 38mm Tri-Holder
P/N 32042 P/N 32064
Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and
pin-on options. 2.5” SQ. .990 Pilot RP-4 Machined Pilot
P/N 40205 P/N 40285
Dump Bottom System (Auto or Manual)
Custom sizes greater than 144” available upon request.
BFZ 100X70/2
Double dump mechanism recommended on barrels 100” diameter and greater. P/N 34172
JEFFREYMACHINE.COM 51
 HD DRILLING BUCKET
CUTTER BAR STYLE

Exploded View

Open View

Bucket Bottom

HD DRILLING BUCKET
CUTTER BAR STYLE SPECIFICATIONS
Diameters: 60” – 144”
Kelly boxes: All kelly boxes made to customer specifications
B47K19L 38mm Dragon’s Tooth®
Barrels: Cylinders up to 2” wall available P/N 30182 P/N 30188
Barrels undersized to meet max cut specifications
Barrel height: Specified by customer 38mm Tri-Holder RP-4 Machined Pilot
P/N 32064 P/N 40285
Barrel details: See page 58 for material specifications and pin-on
options.

Dump Bottom System (Auto or Manual)

Custom sizes greater than 144” available upon request.

52 JEFFREYMACHINE.COM
TAPERED BOTTOM
DRILLING BUCKET

Open View

Tapered bottom drilling buckets are designed

to trap spoil using a simple hinged door that
opens while down pressure is being applied.
Emptying the bucket is hassle free with our
automatic or manual dumping mechanism.
For more information contact one of our sales
representatives today.
Angled Bottomº

TAPERED BOTTOM DRILLING BUCKET

FOUNDATION TOOLS
SPECIFICATIONS
Commonly Requested Diameters: 36” – 144”
Kelly boxes: All kelly boxes made to customer specifications BFZ 100X70/2
P/N 34172
Barrels: Cylinders up to 2” wall available
Barrels undersized to meet max cut specifications
Barrel height: Specified by customer

Dump Bottom System (Auto or Manual)

Custom sizes greater than 144” available upon request.

JEFFREYMACHINE.COM 53
 SINGLE OPEN
CLEAN OUT BUCKET

Exploded View

SINGLE OPEN CLEAN OUT BUCKET

SPECIFICATIONS
Recommended Diameters: 24” – 60”
Kelly boxes: All kelly boxes made to customer specifications
Barrels: Cylinders up to 2” wall available
Barrels undersized to meet max cut specifications
Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and pin-on
options. Flat Bottom View

Dump Bottom System (Auto or Manual)

54 JEFFREYMACHINE.COM
DOUBLE OPEN
CLEAN OUT BUCKET

Exploded View

DOUBLE OPEN CLEAN OUT BUCKET

FOUNDATION TOOLS
SPECIFICATIONS
Recommended Diameters: 60” – 144”
Kelly boxes: All kelly boxes made to customer specifications
Barrels: Cylinders up to 2” wall available
Barrels undersized to meet max cut specifications
Barrel height: Specified by customer
Barrel details: See page 58 for material specifications and pin-on
options. Flat View - Bottom

Dump Bottom System (Auto or Manual)

Custom sizes greater than 144” available upon request.

JEFFREYMACHINE.COM 55
 DRILLING BUCKET PARTS
ARROWHEAD DUMP ASSEMBLY

Arrowhead Male
LARGE P/N 10865
MEDIUM P/N 10864
SMALL P/N 10863

Clevis End Plunger Cap

P/N 10899 & 10900 P/N 10890

Plunger Pin Plunger Shaft Plunger Spring Plunger Tube

P/N 10892 & 10894 P/N 10891 & 10893 P/N 10895 P/N 10889

ARROWHEAD
FEMALE

Pull Handle Receiver Slide Wedge Spring

P/N 10867 & 10886 P/N 10896, 10897, 10898 & 10901 P/N 10883

HINGES

Hinge Assembly - Small

Barrel Hinge Plates

LARGE P/N 10841 & 10845 Bottom Hinge Plates Large Bottom Hinge Plates Medium
MEDIUM P/N 10840 & 10843 P/N 10813 & 10814 P/N 10811 & 10812 Hinge Pin

56 JEFFREYMACHINE.COM
J-HOOK DUMP ASSEMBLY

Guide Sleeve Hook Hook Pin Hook Shaft

P/N 10918 P/N 10920 P/N 10919 & 10925 P/N 10917

Plunger Pin Plunger Shaft Plunger Spring Plunger Tube

P/N 10909 & 10916 P/N 10908 & 10938 P/N 10914 P/N 10906

J HOOK LATCH
ASSEMBLY

Wrench for Spin Bottom Pin Assembly

Latch Bar Side Plate LARGE P/N 10838
P/N 10904 P/N 10905
MEDIUM P/N 10837

SPIN BOTTOM PIN ASSEMBLY FOUNDATION TOOLS

➏
➎ ➍
ITEM
➊ Boss
LARGE P/N
10819
MEDIUM P/N
10818
SMALL P/N
10817

➋ ➋ Manganese Bronze Bushing 10822

10825
10821
10824
10820
10823
➌ Spin Bottom Pin
➊ ➍ Castle Nut 10828 10827 10826

➎ Hex Bolt 10831 10830 10829

➏ Hex Nut 10834 10833 10832

➌
JEFFREYMACHINE.COM 57
 DRILLING BUCKET PARTS
ROCK DRILLING BOTTOM
Hinge Pin – High Strength Alloy
Hinge Bushings – Manganese Bronze
Hinge Plates – A514 T1
Mid Plate – A572 GR50
Spin Bottom Pin – 4140 Annealed
Bottom Plate – A572 GR50
Cutter Bar – A514 T1

DIRT DRILLING BOTTOM

Spin Bottom Pin – 4140 Annealed
Bottom Plate – A572 GR50
Dirt Cutter Bar - A514 T1

CLEAN OUT BOTTOM

Spin Bottom Pin – 4140 Annealed
Bottom Plate – A572 GR50
Scraper Blade – A514 T1

Material Grade Tensile Strength

A572 GR50 58,000 – 80,000 psi
A514 T1 110,000 – 130,000 psi
4140 Annealed 95,000 psi
High Strength Alloy 175,000 psi
Manganese Bronze 66,700 psi

Pin-on style bottoms allow any of the three options shown above to be used with the same JM bucket. Please contact a
Jeffrey Machine Representative with any questions regarding our Drilling & Cleanout Buckets.

58 JEFFREYMACHINE.COM
 FOUNDATION TOOLS

JEFFREYMACHINE.COM 59
 OPEN TOP SPIN BOTTOM
CLEAN OUT BUCKET

OPEN TOP SPIN BOTTOM

CLEAN OUT BUCKET
SPECIFICATIONS
Commonly Requested Diameters: 24"– 144" *
Kelly boxes**: All kelly boxes made to customer specifications
Barrels: Up to 2" thick
Barrel height specified by customer
Top Plate: 1" thick material with 1" gussets
• Double stop
• Solid center shaft
• 1½” T-1 scraper blade
Wear Protection: Available upon request
*Custom sizes greater than 144” available upon request Bottom View

**Not all drive boxes available on all sizes. Please contact us to find out if a particular drive box will fit in this application.
60 JEFFREYMACHINE.COM
TWIST-LOCK
RETRIEVAL BUCKET

TWIST-LOCK RETRIEVAL BUCKET

SPECIFICATIONS
FOUNDATION TOOLS
Available sizes: 24"– 120"

TEETH & HOLDERS

FOR OUTSIDE DIAMETER .990 JeffCut®
Holder with: B40HDS .990HB .990 Dragon’s Tooth®

38mm JeffCut® 38mm Dragon’s Tooth® BKH113 B47K22-H B47K19L B47K19H

Holder with:

JEFFREYMACHINE.COM 61
62 JEFFREYMACHINE.COM
DRIVE BOXES
FABRICATED DRIVE BOX RATINGS
Drive Box Standard Pin Diameter Maximum Torque Maximum Pull-Out Force
3.000in Drive Box 7/8” 40,800 ft-lbs 54,100 lbs
3.500in Drive Box 7/8” 52,500 ft-lbs 54,100 lbs
4.000in Drive Box 7/8” 65,500 ft-lbs 54,100 lbs
4.250in Drive Box 1” 123,000 ft-lbs 70,700 lbs
4.500in Drive Box 1” 135,000 ft-lbs 110,000lbs
5.000in Drive Box 1 1/2” 160,000 ft-lbs 159,000lbs
5.250in Drive Box 1 1/2” 174,000 ft-lbs 159,000lbs
6.000in Drive Box 1 1/2” 217,000 ft-lbs 159,000lbs
7.000in Drive Box (2x) 1 1/2” 284,000 ft-lbs (Double Pin) 318,000lbs
130mm Drive Box 1 1/2” 167,000 ft-lbs 159,000lbs
150mm Drive Box 1 3/4” 210,000 ft-lbs 216,000lbs
200mm Drive Box 18in Short Hole 2 3/8” 359,000 ft-lbs (Double Pin) 797,000lbs
200mm Drive Box HD 18in Short Hole 2 3/8” 511,000 ft-lbs (Double Pin) 797,000lbs
200mm Drive Box 18in Tall Hole 2 3/8” 359,000 ft-lbs (Double Pin) 797,000lbs
200mm Drive Box HD 18in Tall Hole 2 3/8” 511,000 ft-lbs (Double Pin) 797,000lbs
200mm Drive Box 21.500in 2 3/8” 359,000 ft-lbs (Double Pin) 797,000lbs
200mm Drive Box HD 21.500in 2 3/8” 511,000 ft-lbs (Double Pin) 797,000lbs

3 1/8” (79.4mm)
9” (228.6mm)

3.000” Drive Box

P/N 43525

3 5/8” (92.1mm)
9” (228.6mm)

3.500” Drive Box

P/N 43535

FOUNDATION TOOLS

4 1/8” (104.8mm)
9 3/4” (247.7mm)

4.000” Drive Box

P/N 43545

Jeffrey Machine Drive Boxes are *PE Certified.

JEFFREYMACHINE.COM 63
 DRIVE BOXES
4 3/8” (111.1mm)

9 3/4” (247.7mm)
4.250” Drive Box
P/N 43555

4 5/8” (117.5mm)

9 3/4” (247.7mm)
4.500” Drive Box
P/N 43680

5 1/8” (130.2mm)
10 5/8” (269.9mm)

5.000” Drive Box

P/N 43560

5 3/8” (136.5mm) 10” (254mm)

5.250” Drive Box

P/N 43575

Jeffrey Machine Drive Boxes are *PE Certified.

64 JEFFREYMACHINE.COM
 6 1/8” (155.6mm)

10 5/8” (269.9mm)
6.000” Drive Box
P/N 43600

7 1/8” (181mm)

9 5/8” (244.5mm)
7.000” Drive Box
P/N 43615

5 1/4” (133.4mm)
9 1/2” (241.8mm)

130mm Drive Box

P/N 43595

6” (152.4mm)
FOUNDATION TOOLS
10 5/8” (269.9mm)

150mm Drive Box

P/N 43695

Jeffrey Machine Drive Boxes are *PE Certified.

JEFFREYMACHINE.COM 65
 DRIVE BOXES
8 1/8” (206.4mm)

18” (457.2mm)
200mm Drive Box
Short Hole 18”
P/N 43671

8 1/8” (206.4mm)

18” (457.2mm)
200mm Drive Box
HD Short Hole 18”
P/N 43677

8 1/8” (206.4mm)

18” (457.2mm)
200mm Drive Box
Tall Hole 18”
P/N 43670

8 1/8” (206.4mm)
18” (457.2mm)

200mm Drive Box

HD Tall Hole 18”
P/N 43676

Jeffrey Machine Drive Boxes are *PE Certified.

66 JEFFREYMACHINE.COM
 8 1/8” (206.4mm)

21 1/2” (546.1mm)
200mm Drive Box
HD 21.5”
P/N 43679

8 1/8” (206.4mm)

200mm Drive Box

21 1/2” (546.1mm)
21.5”
P/N 43678

DRIVE BOX ADAPTERS

FOUNDATION TOOLS
5.000in Drive Box 200mm Drive Box
to 4.000in Sq. Male to 7.000in Sq. Male
Adapter Adapter
P/N 28500DBX400SM P/N 28200DBX700SM

ADAPTER DISCLAIMER: This adapter exceeds the torque rating. Failure can and may occur. Jeffrey Machine will not be held responsible for
failure due to over torque. Jeffrey Machine reserves the right to inspect if failure occurs.
Jeffrey Machine Drive Boxes are *PE Certified.
JEFFREYMACHINE.COM 67
68 JEFFREYMACHINE.COM
SHIM BOXES
If you have multiple size kelly bars you can buy
1 tool and 3 shim boxes instead of buying 4
different tools.

Part Number Description

98525X350SB 5-1/4” to 3-1/2” SHIM BOX
7” to 130mm Shim Box
98525X400SB 5-1/4” to 4” SHIM BOX P/N 98700X130SB
98525X425SB 5-1/4” to 4-1/4” SHIM BOX
98700X130SB 7” to 130mm SHIM BOX
98700X525SB 7” to 5-1/4” SHIM BOX
98700X600SB 7” to 6” SHIM BOX
98200SX700SB 200mm to 7” SHIM BOX
98200TX700SB 200mm TALL SHIM BOX

FOUNDATION TOOLS

200mm to 7” Shim Box

P/N 98200SX700SB

SHIM BOX CLAUSE: Shim boxes are made to fit Jeffrey Machine manufactured Kelly Drive boxes. Our shim boxes are fabricated then
machined for a precise fit. Jeffrey Machines shim boxes are not guaranteed to fit in other manufactures boxes, for true measurements on
shims please contact one of our sales representatives for more information.

JEFFREYMACHINE.COM 69
70 JEFFREYMACHINE.COM
 TEETH
.990 Teeth
9/16” (15mm) 9/16” (15mm) 15/16” (24mm)

2 1/2” (64mm)
7/8” (22mm)
2 5/16” (58mm)

2 1/4” (57.5mm)
4 1/2” (115mm)

4 13/16” (122mm)
1 13/16” (46mm)
.990 Dragon’s Tooth® B40 HDS
P/N 30145 P/N 30155
1” (25mm)

1” (25mm)
1/2” (12mm) 1 1/2” (38mm)
3/4” (19mm)
2” (50.3mm)
2 3/8” (61mm)

3 1/4” (82mm)

35º
4 5/8” (118mm)

6 15/16” (151.5mm)
2 3/4” (69.5mm)

2 3/8” (60mm)

.990HB Conical Tooth .990 Dirt Tooth

P/N 30122 P/N 34380
1” (25mm)
1 5/16” (33mm) 1” (25mm)

38mm Teeth
FOUNDATION TOOLS
5/8” (15mm)
1 3/16” (30mm) 1 3/16” (30mm)

7/8” (22mm)
3 1/16” (77mm)

3 1/8” (80mm)

2 1/2” (63mm)
5 1/2” (140mm)
5 3/8” (137mm)

1 15/16” (50mm)

38mm Dragon’s Tooth® BKH113 30mm Carbide

P/N 30188 (80mm Gauge)
1 3/16” (30mm)
1 3/16” (30mm) P/N 30225
1 1/2” (38mm)
1 1/2” (38mm) 2 3/8” (60mm)

JEFFREYMACHINE.COM 71
 38mm Teeth
3/4” (19mm)
2 9/16” (65mm) 1 1/8” (29mm) 3/4” (19mm) 1 1/8” (29mm)

3 1/8” (80mm)
4 15/16” (125mm)

5 1/2” (140mm)
B47K19H B47K19L
P/N 30162 P/N 30182
1 3/16” (30mm)
1 1/2” (38mm) 1 3/16” (30mm)
1 15/16” (50mm) 1 1/2” (38mm)
1 15/16” (50mm)

2 3/4” (70mm) 2 3/4” (70mm)

3/8” (9.1mm)
3 15/16” (100mm)

4 1/2” (113mm)
6 3/4” (173mm)
6 5/16” (160.3mm)

1 15/16” (50mm) 1 15/16” (50mm)

2 1/2” (63mm) 2 1/2” (63mm)
BFZ 100X70/2 JMI 113X70
Tooth P/N 34241
P/N 34172 1 1/2” (38mm)
1 1/2” (38mm)

3/4” (19mm) 1” (25mm)

7/8” (22mm) 1 5/16” (34mm)
2 3/4” (70.5mm)

5 1/8” (130.5mm)

6 7/16” (162.8mm)

B47K22-H 55-1S / C4-1

1 3/16” (30mm) P/N 30212 P/N 30242
1 1/2” (38mm)
1 15/16” (50mm) 1 3/16” (30mm)
1 1/2” (38mm)

72 JEFFREYMACHINE.COM
 Hard Surfaced Teeth
3/4” (19mm) 1 1/8” (29mm)
3/4” (19mm) 1 1/8” (29mm)
3 1/8” (80mm)

2 9/16” (65mm)
5 1/2” (140mm)

4 15/16” (125mm)
B47K19-L B47K19-H
Hard Surfaced Hard Surfaced
P/N 30185 P/N 30164
1 3/16” (30mm) 1 3/16” (30mm)
1 1/2” (38mm) 1 1/2” (38mm)
1 15/16” (50mm) 1 15/16” (50mm)

1/2” (12mm) 3/4” (19mm)

1 3/16” (30mm) 1 3/16” (30mm)
3 1/8” (80mm)

2 3/8” (61mm)
5 1/2” (140mm)

4 5/8” (118mm)

1 3/16” (30mm)
BKH113 30mm
Carbide
.990HB Conical Tooth
Hard Surfaced
FOUNDATION TOOLS
1 1/2” (38mm)
2 3/8” (60mm) Hard Surfaced P/N 30126
P/N 30226 1” (25mm)
1 5/16” (33mm)

JEFFREYMACHINE.COM 73
 HOLDERS
.990 Holders
1” (25.5mm) 1 3/4” (44.5mm)
1” (25.5mm) 3” (76mm)

1 3/4” (44.5mm)
1 1/2” (38mm)

2 3/8” (61mm)
2 3/8” (60mm)

.990 Dragon‘s .990 Machined

Tooth® Holder Holder
P/N 32049 P/N 32045

1” (25.5mm) 2 1/2” (63.5mm) 2 3/4” (70mm)

1” (25.5mm)

1 3/4” (44.5mm)
1 1/2” (38mm)

1 1/2” (38mm)
3 1/2” (90mm)

2 3/8” (60mm)

.990 JeffCut® .990 Tri-Holder

Holder P/N 32042
P/N 32150

1” (25.4mm) 3 1/4” (82.5mm)

1” (25.5mm) 2 3/4” (70mm)

1 3/4” (44mm)
1 3/4” (44.5mm)
1 1/2” (38mm)

2 3/8” (61mm)
2 3/8” (60mm)

.990 Jeff444 C-30 .990 Holder

Tri-Holder P/N 32040
P/N 32104

38mm Holders
1 1/2” (38.2mm) 3” (76.2mm)
3” (76.2mm)
1 1/2” (38.2mm)
2 1/2” (63.5mm)
1 1/2” (38mm)

2 1/2” (63.5mm)
1 1/2” (38mm)
3” (76.2mm)
2 1/2” (63.5mm)

3” (76.2mm)
2 1/2” (63.5mm)

38mm Jeff444
Tri-Holder 38mm Tri-Holder
1 3/16” (30.2mm)
P/N 32102 P/N 32064
1 3/16” (30.2mm)

74 JEFFREYMACHINE.COM *Patent Pending

 38mm Holders
1 1/2” (38.2mm) 3” (76.2mm)
1 1/2” (38.2mm) 3 1/4” (82.6mm)

1 1/2” (38mm)
2 1/2” (63.5mm)
1 1/2” (38mm)
2 1/2” (63.5mm)

3 3/4” (95mm)
JeffCut®
38mm Dragon’s 38mm Holder
1 3/16” (30.2mm) Tooth® Holder P/N 32152
P/N 32058
1 3/16” (30mm)

1 1/2” (38.2mm) 4” (101.6mm) 3 3/4” (95mm)

1 1/2” (38.2mm)
2 13/16” (72mm)
1 1/2” (38mm)

3” (76.2mm)
2 1/2” (63mm)

1 1/2” (38mm)

3” (76.2mm)
2 1/2” (63.5mm)

1 3/16” (30.2mm)
JM43 Holder JM48 Holder
P/N 32050 1 3/16” (30.2mm) P/N 32061

1 1/2” (38.2mm) 1 1/2” (38.2mm)

FOUNDATION TOOLS
2 3/4” (70mm)
2 3/4” (70mm)
1 1/2” (38mm)

1 1/2” (38mm)
2 3/8” (60.3mm)
3 5/8” (63.5mm)

JM85 Machine JM85 Machine

Holder Holder for C4-1
P/N 32060 1 3/16” (30.2mm) P/N 32092

1 3/16” (30.2mm)

JEFFREYMACHINE.COM 75
 DIRT TEETH & HOLDERS
3 3/4” (96mm)

2 1/2” (63.5mm)
2 1/4” (57mm)

5 7/8” (149mm)
4 1/2” (115mm)

W0-5 Holder #201 Dirt Tooth

P/N 36010 P/N 34100

3 1/2” (90mm)
3 3/8” (85mm)

5 7/8” (148mm) 5 13/16” (148mm)

#211 Dirt Tooth #132 Dirt Tooth

P/N 34110 P/N 34251
5 1/8” (130mm)

#299 Dirt Tooth

P/N 34131

5 7/8” (149mm)

#134 Dirt Tooth

P/N 34255
TC-212 Tooth
P/N 34274

76 JEFFREYMACHINE.COM
 3” (76mm)

1 1/2” (38mm)
2 5/8” (66.5mm)

W0-1 Holder
P/N 36000

3 1/2” (90mm)
2 1/2” (65mm)

4 1/4” (108mm)
4 1/4” (108mm)

#101 Dirt Tooth #111 Dirt Tooth

P/N 34070 P/N 34080

FOUNDATION TOOLS

JEFFREYMACHINE.COM 77
 PILOT BITS
2 1/2” (63.5mm) 7 1/4” (184mm) 2 3/8” (60.3mm) 7 1/4” (184mm)
cut diameter regular api cut diameter

2 1/2” SQ. .990 Dragon’s Tooth® Pilot 2 3/8” Reg API .990 Pilot
P/N 40216 P/N 40410

3 1/2” (88.9mm) 2 7/8” (73mm) 7 1/4” (184mm)

regular api regular api
7 1/4” (184mm) cut diameter
cut diameter

3 1/2” Reg API .990 Pilot 2 7/8” IF .990 Pilot

P/N 40460 P/N 40500

2 1/2” (63.5mm)
3 1/2” (88.9mm)
7 1/4” (184mm)
cut diameter 5 3/4” (146mm)
cut diameter
10 3/8” (264mm)

2 1/2” SQ. DB-6 Pilot

3 1/2” IF .990 Pilot
P/N 40220
P/N 40520

2 1/2” (63.5mm)

2 9/16” (65mm)
8” (203mm)
cut diameter
6” (152.5mm)
11 1/4” (286mm)

3” (77mm)

2 1/2” SQ. BP-08 Pilot 2 1/2” SQ. Pilot Adapter

P/N 40470 P/N 42040

1” (25mm)

78 JEFFREYMACHINE.COM
4” (101.6mm) 4” (101.6mm)
8” (203mm) 12” (305mm)
cut diameter
cut diameter

4” SQ. JM 8“ Dirt Pilot 4” SQ. JM 12“ Dirt Pilot

P/N 40260 P/N 40264

4” (101.6mm)
4” (101.6mm)

10 1/4” (260.5mm) 11 3/4” (298.5mm)

cut diameter cut diameter

RP-4 Cast Pilot RP-4 Machined Pilot

P/N 40280 P/N 40287

4” (102.5mm)
7” (177mm)
4 1/2” (114mm)

177mm SQ. Pilot Adapter

1 3/16” (30mm) P/N 42080

FOUNDATION TOOLS

JEFFREYMACHINE.COM 79
 MISCELLANEOUS PARTS

CJ2 Holder CJ2 Tooth

P/N 36070 P/N 34220

2” x 3” x 1/2” 2” x 3” x 5/8” 1 1/2” X 3” X 1/2”

Wear Pads Wear Pads Wear Pads
P/N 39302 P/N 39304 P/N 39303

3/4” Hex Weld Bars 1 1/8” Hex Weld Bars 1 3/8” Hex Weld Bars
P/N 34350 P/N 34340 P/N 34330

Soft Hammer Knock Out Punch

P/N 39150 P/N 30562
Recommended for Dragon’s Teeth®

BULLET TOOTH PULLERS

123 Bullet Tooth Puller Jeffrey Combination
P/N 30542 Knock Out & Tooth Insertion Tool
P/N 30570

.990 Bullet Tooth Puller

P/N 30512

38mm Series Puller

P/N 30524

80 JEFFREYMACHINE.COM
JEFFREY MACHINE
WARRANTY DISCLAIMER
Products manufactured by Jeffrey Machine are subject to wear; and
occasional breakage should, therefore, be expected.

WARRANTY DISCLAIMER
Jeffrey Machine products are warranted from defects in material and
workmanship for a period of 30 days from the date of invoice.

Jeffrey Machine reserves the right to inspect all failure that may occur
before any repairs or modifications from original manufacturing design are
performed.

Any repairs or modifications performed without written permission from

Jeffrey Machine will void all warranty.

In no event shall Jeffrey Machine be liable for consequential or incidental

damages.

JEFFREYMACHINE.COM 81
82 JEFFREYMACHINE.COM
DERRICK
AUGER
FEATURES
Derrick augers come
equipped with heavy duty

& BENEFITS
hex collars

It’s important to note that

we manufacture all of our
own tools so we can tightly
control the quality.
We can also customize as
needed.

D.O.M. Hydraulic Tube

85,000 P.S.I.

UTILITY DRILLING TOOLS

Gusset (extra flighting
start) for better balanced Augers come
cut and added strength equipped with
means less wear and tear 1” thick lower
on your rig. flighting

JEFFREYMACHINE.COM 83
 HOW TO ORDER
SELECT YOUR MODIFICATIONS
Mix and match shanks, bits and pilots for a large number of possibilities that can be made to specifically fit
your application.

HEX COUPLERS, HUBS & ADAPTERS

Available in multiple sizes, SEE PAGE 94.

AUGER LENGTH
Overall length of 104”.

FLIGHTING
40” to 60” of 3/8” flighting available. SEE PAGE 121.

MEDIUM DUTY CENTER HEADS

Available from 8” to 48”, SEE PAGE 95.

SHANK PLATES
Available in multiple teeth type and quantitites,
SEE PAGES 96-97.

TEETH
For a list of available teeth for Derrick Augers,
SEE PAGE 99.

PILOT ADAPTERS
For a pilot adapter available,
SEE PAGE 105.

PILOT BITS
For a list of all available, SEE PAGES 104-105.

Custom orders cannot be refunded, canceled, or returned for any reason.

84 JEFFREYMACHINE.COM
 EXPLODED VIEW

Shank Plate Bolts

Nuts
Medium Duty
Center Head

Pilot Adapter Teeth

Pilot

4 BASIC SET-UPS

UTILITY DRILLING TOOLS

MEDIUM DUTY DIRT MEDIUM DUTY CARBIDE
Loose and compacted soils, stiff clays High abrasion, frozen soil, low impact.
and soft shelves. (SHOWN ABOVE) (SHOWN ABOVE)

MEDIUM DUTY BOLT-ON MEDIUM DUTY BOLT-ON

BULLET DRAGON’S TOOTH®
Limestone, lava rock, medium sand Aggresively cuts through limestone,
stone and frozen materials. Medium coral, lava rock, medium sand stone
to hard formations. (SEE PAGE 90) and frozen materials. Medium to hard
formations. (SEE PAGE 91)

JEFFREYMACHINE.COM 85
 UTILITY
DIRT TOOTH AUGER
The right tool for loose and compacted soils, stiff clays, and soft shales.

UTILITY DIRT AUGER WITH

FH-205 DIRT PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of
3/8” thick flighting.

Diameter Part No.

9” 9-104-60DA
1652 Gauge 10” 10-104-60DA
Dirt Tooth
P/N 34010 12” 12-104-60DA
14” 14-104-60DA
16” 16-104-60DA
18” 18-104-60DA
20” 20-104-60DA
FH-205 Dirt Pilot 22” 22-104-60DA
P/N 40000
24” 24-104-60DA
30” 30-104-48DA
36” 36-104-48DA
42” 42-104-48DA
1650 Dirt
Tooth 48” 48-104-48DA
P/N 34000

86 JEFFREYMACHINE.COM
MEDIUM DUTY
BOLT-ON CARBIDE AUGER
The right tool for high abrasion, frozen soil, and low impact.

MEDIUM DUTY BOLT-ON CARBIDE

AUGER WITH FH-205HFTC CARBIDE
PILOT PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of 3/8”
thick flighting.

Diameter Part No.

9” 9-104-60CA
1656 Carbide 10” 10-104-60CA
Tooth
P/N 34030 12” 12-104-60CA
14” 14-104-60CA

UTILITY DRILLING TOOLS

16” 16-104-60CA
18” 18-104-60CA
20” 20-104-60CA
22” 22-104-60CA
FH-205HFTC
P/N 40010 24” 24-104-60CA
30” 30-104-48CA
36” 36-104-48CA
42” 42-104-48CA
1658 Carbide
Tooth 48” 48-104-48CA
P/N 34040

JEFFREYMACHINE.COM 87
 MEDIUM DUTY
BULLET TOOTH AUGER
The right tool for solid rock, fracturable rock, and compacted soils.

MEDIUM DUTY BULLET TOOTH

AUGER WITH 1 3/4” SQUARE
ROCK PILOT OR API ROCK PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60”
of flighting.
• 1” thick lower flight, 3/8” upper flight,
and standard pilot bit.

Diameter Part No.

2 3/8” Reg API
9” 9-104-60BA
.765 Pilot 10” 10-104-60BA
P/N 40100
12” 12-104-60BA
14” 14-104-60BA
16” 16-104-60BA
18” 18-104-60BA
20” 20-104-60BA
1 3/4” Square 22” 22-104-60BA
Pilot
P/N 40180 24” 24-104-60BA
30” 30-104-48BA
36” 36-104-48BA
42” 42-104-48BA
48” 48-104-48BA
.765CB
Conical Tooth
P/N 30042

88 JEFFREYMACHINE.COM
MEDIUM DUTY
DRAGON’S TOOTH® AUGER
The right tool for solid rock, fracturable rock, and compacted soils.

MEDIUM DUTY DRAGON’S TOOTH®

AUGER WITH 1 3/4” SQUARE ROCK
PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of 3/8”
thick flighting.
• 1” thick lower flight, 3/8” upper flight, and
standard pilot bit.

Diameter Part No.

9” 9-104-60DRA
10” 10-104-60DRA
1 3/4” Square 12” 12-104-60DRA
Dragon’s Tooth®
.875 Pilot 14” 14-104-60DRA
P/N 40239

UTILITY DRILLING TOOLS

16” 16-104-60DRA
18” 18-104-60DRA
20” 20-104-60DRA
22” 22-104-60DRA
.875 Dragon’s 24” 24-104-60DRA
Tooth®
P/N 30112
30” 30-104-48DRA
36” 36-104-48DRA
42” 42-104-48DRA
48” 48-104-48DRA

* The Dragon’s Tooth® is an original design of Jeffrey Machine, Inc.

JEFFREYMACHINE.COM 89
 MEDIUM DUTY BOLT-ON
BULLET TOOTH AUGER
The right tool for limestone, lava rock, medium sand stone, and frozen materials.
Best used in medium to hard formations.

UTILITY BOLT-ON BULLET AUGER

WITH RCP-6.5 ROCK PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of
3/8” thick flighting.
• RCP-6.5 Rock Pilot

Diameter Part No.

16” 16-104-60BOB
18” 18-104-60BOB
20” 20-104-60BOB
24” 24-104-60BOB

RCP-6.5
Pilot
P/N 40240

.875 Bullet
Tooth
P/N 30082

Rock Shank
Plate
Reference page 96
for available sizes

90 JEFFREYMACHINE.COM
MEDIUM DUTY BOLT-ON
DRAGON’S TOOTH® AUGER
Consumes limestone, lava rock, coral, medium sand stone, and frozen materials.
Excels in medium to hard formations.

UTILITY BOLT-ON DRAGON’S TOOTH®

WITH DCP-6.5 ROCK PILOT
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of 3/8”
thick flighting.

Diameter Part No.

16” 16-104-60BOD
18” 18-104-60BOD
20” 20-104-60BOD
24” 24-104-60BOD

DCP-6.5
Pilot
UTILITY DRILLING TOOLS
P/N 40238

.875 Dragon’s
Tooth®
P/N 30112

Dragon’s Tooth®
Shank Plate
Reference page 96
for available sizes

*The Dragon’s Tooth® is an original design of Jeffrey Machine, Inc.

JEFFREYMACHINE.COM 91
 SPIRAL DRAGON’S TOOTH®
ROCK AUGER
The right tool for solid rock, fracturable rock, and compacted soils.

SPIRAL DRAGON’S TOOTH®

ROCK AUGER
• 2”, 2 1/2”, and 2 5/8” hex hubs.
• Overall length of 104”, with 40” to 60” of 3/8”
thick flighting.
• 1” thick lower flight, 3/8” upper flight, and
standard pilot bit.

Diameter Part No.

9” 9-104-60SDA
10” 10-104-60SDA
12” 12-104-60SDA
1 3/4” Square 14” 14-104-60SDA
Dragon’s Tooth®
.875 Pilot 16” 16-104-60SDA
P/N 40239
18” 18-104-60SDA
20” 20-104-60SDA
22” 22-104-60SDA
24” 24-104-60SDA
30” 30-104-48SDA
.875 Dragon’s 36” 36-104-48SDA
Tooth®
P/N 30112
42” 42-104-48SDA
48” 48-104-48SDA

92 JEFFREYMACHINE.COM
UTILITY DRILLING TOOLS

93
JEFFREYMACHINE.COM
 HEX COUPLERS,
HUBS & ADAPTERS
HEX ADAPTERS

2.5” Hex Hub X 2.5” Hex Hub X 2” Hex Hub X 2.625” Hex Hub X
2” Hex Male 2.625” Hex Male 2.5” Hex Male 2.5” Hex Male
P/N 28000 P/N 28002 P/N 28003 P/N 28004

HEX COUPLERS

2” Hex X 2” 2.5” Hex X 2” 2.625” Hex X 2.625”

Hex Coupler Hex Coupler Hex Coupler
P/N 27000F P/N 27010 P/N 27020F

2.625” Hex X 2” Hex 2.625” Hex X 2.5” 2.5” Hex X 2.5” Hex
Coupler Hex Coupler Coupler
P/N 27030 P/N 27040 P/N 27050

HEX HUBS

2” Hex Hub 2 1/2” Hex Hub 2 5/8” Hex Hub 3” Hex Hub
P/N 43030 P/N 43050 P/N 43070 P/N 43080

94 JEFFREYMACHINE.COM
MEDIUM DUTY
CENTER HEADS
Description Part Number
8” MD Center Head 38000
9” MD Center Head 38010 8” MD Center Head
P/N 38000
10” MD Center Head 38020
12” MD Center Head 38030
14” MD Center Head 38040
16” MD Center Head 38050
18” MD Center Head 38060
20” MD Center Head 38070
22” MD Center Head 38080
12” MD Center Head
24” MD Center Head 38090 P/N 38030

30” MD Center Head 38100

36” MD Center Head 38110
42” MD Center Head 38120
48” MD Center Head 38130

18” MD Center Head

P/N 38060

24” MD Center Head

P/N 38090 30” MD Center Head
UTILITY DRILLING TOOLS
P/N 38100

48” MD Center Head

P/N 38130

JEFFREYMACHINE.COM 95
 SHANK PLATES
810x
Description Part Number Teeth Quantity Teeth Quantity: 1
P/N 37000
810x 37000 1
12x 37020 2
145x 37040 2
16 x 1 37050 2 16 x 1
Teeth Quantity: 2
16 x 2 37060 2 P/N 37050

18 x 1 37070 3
18 x 2 37080 3
20 x 1 37090 3 18 x 2
Teeth Quantity: 3
20 x 2 37100 3
P/N 37080
22 x 1 37110 3
22 x 2 37120 3
24 x 1 37130 3 267 x 1
Teeth Quantity: 4
24 x 2 37140 4 P/N 37150
267 x 1 37150 4
267 x 2 37160 4
30 x 1 37170 4
42 x 1
30 x 2 37180 4 Teeth Quantity: 5
36 x 1 37190 4 P/N 37210

36 x 2 37200 4
42 x 1 37210 5
42 x 2 37220 5
48 x 2
48 x 1* 37230 2 Teeth Quantity: 3
P/N 37240
48 x 2* 37240 3

*Only outside shank. Must be used with a 36 x 1 or 36 x 2 shank sold separately.

C016 Blank C018 Blank C020 Blank C024 Blank

P/N 37310 P/N 37320 P/N 37330 P/N 37340

96 JEFFREYMACHINE.COM
ROCK SHANK KITS
Includes shank plates for bullet teeth and Dragon’s Teeth®, the teeth and pilots.

ROCK SHANK KIT

Description Quantity of Teeth per Shank

RSK16 Shank Plate Kit & Pilot (37900) 4
RSK18 Shank Plate Kit & Pilot (37910) 5
RSK20 Shank Plate Kit & Pilot (37920) 5
RSK24 Shank Plate Kit & Pilot (37930) 6

DRAGON’S TOOTH® SHANK KIT

UTILITY DRILLING TOOLS

Description Quantity of Teeth per Shank

DSK16 Dragon’s Tooth Shank Plate Kit (37940)
®
4
DSK18 Dragon’s Tooth® Shank Plate Kit (37950) 5
DSK20 Dragon’s Tooth® Shank Plate Kit (37960) 5
DSK24 Dragon’s Tooth® Shank Plate Kit (37970) 6

JEFFREYMACHINE.COM 97
 TWIN HELIX AUGER

Closed

Open

1650 Dirt 1652 Gauge

Tooth Tooth
TWIN HELIX AUGER P/N 34000 P/N 34010

SPECIFICATIONS
Commonly Requested Diameters: 18"– 36"
Type: Medium Duty Boring Head (type-6)
1656 Carbide 1658 Carbide
Cut: DC/DF or DC/SF Tooth Tooth
P/N 34030 P/N 34040
Kelly boxes: All kelly boxes made to customer specifications
Center Shaft: 4” Solid Shaft CONSOLIDATED ROCK /
ABRASIVE SOIL PILOT
Flight: 3/8” - 1” thickness available
Carbide - 1656 / 1658 teeth
P/N 40050 (P1656)

Dirt - 1650 / 1652 teeth

P/N 40040 (P1650)

98 JEFFREYMACHINE.COM
 TEETH & HOLDERS
16 Series

2 5/8” (67mm)
2 1/8” (54mm)

Standard Digging Standard Digging

1650 Dirt Tooth 1652 Gauge Tooth
P/N 34000 P/N 34010
5” (128mm) 5” (128mm)

2 1/2” (63.5mm)
2 1/8” (54mm)

Tungsten Carbide Carbide Gauge

Tooth 1656 Tooth 1658
• Highly abrasive soil • Highly abrasive
• Low mpact soil
5” (128mm) 5” (128mm)
P/N 34030 P/N 34040
2 1/8” (54mm)

1650 HFFTC Tooth

UTILITY DRILLING TOOLS

• Abrasive soil
• Impact, hard faced
5” (128mm) with carbide chips
on two sides

P/N 34002
1ft. Length Rubber Lok
P/N 39110

1 X S Holder WT50 Holder

P/N 36040 P/N 36050

JEFFREYMACHINE.COM 99
 TEETH & HOLDERS
20 Series
2 1/2” (64mm)

2 7/8” (72mm)
2077 Carbide Tooth 2078 Carbide Tooth
P/N 34050 P/N 34060

5” (128mm)
5” (128mm)

WA-70
P/N 36030

100 JEFFREYMACHINE.COM
TEETH & HOLDERS
CARBIDE FACED TOOTH PFC-5 PFC-5H
P/N 34200 P/N 36020
• Carbide faced tooth for the step rock auger
• Best used in solid, non-fracturable rock

101 & 111 TOOTH HOLDER

TWT-2 W0-2 Holder
TDB31 Tooth
P/N 34210 P/N 36060
P/N 34140

BFZ 222 Tooth

P/N 34192
CB10 Tooth CB10 Holder
P/N 34230 P/N 36080

UTILITY DRILLING TOOLS

ACCESSORIES
BULLET TOOTH PULLERS

123 Bullet Tooth Puller

Fits .735, .765 and .875 Teeth
P/N 30542

39110 1 ft. Length Rubber Lock

Knock Out Punch
39150 Soft Hammer
P/N 30562

JEFFREYMACHINE.COM 101
 TEETH & HOLDERS
11/16” (16mm) 1/2” (13.3mm) 7/16” (12mm) 3/4” (19mm)

1 13/16” (46.7mm)
1 3/4” (44mm)

3 5/16” (85mm)

3 7/16” (87mm)
.735CB Conical Tooth .735HB Conical Tooth
P/N 30012 P/N 30022
3/4” (18.7mm)
1 1/16” (27mm)
3/4” (18.7mm)
1 1/16” (27mm)

5/8” (16mm) 1/2” (13.3mm) 1/2” (12mm) 3/4” (19mm)

1 3/4” (44mm)

1 3/4” (44mm)
3 5/16” (84.3mm)

3 5/16” (84.5mm)

.765CB Conical Tooth .765HB Conical Tooth

P/N 30042 P/N 30062

3/4” (19.4mm) 3/4” (19.4mm)

1 1/16” (27mm)
1 1/16” (27mm)

1/2” (12mm) 3/4” (19mm) 5/8” (16mm) 1/2” (13.3mm)

1 3/4” (45mm)

1 3/4” (45mm)

3 7/16” (87mm)
3 3/8” (86mm)

.765HS Conical Tooth .875CS Conical Tooth

P/N 30072 P/N 30082

3/4” (19.4mm) 7/8” (22mm)

1 1/16” (27mm) 1 1/16” (27mm)

102 JEFFREYMACHINE.COM
 .735 Holder .765 Holder
P/N 32021
P/N 32011

.875 Holder .875 JeffCut®

P/N 32035 Holder
P/N 32004

DRAGON’S TOOTH® NON-ROTATING TOOTH

• Fits .875 Dragon’s Tooth® holder • Large long-life carbide
• Non-rotating design • Shank plates and pilots available

UTILITY DRILLING TOOLS

7/8” (22.5mm) 2 1/2” (63.5mm)
1 1/2” (39mm)
1 3/4” (45mm)

.875 Machined .875 Dragon’s

Dragon’s Tooth® Tooth®
Holder P/N 30112-N
P/N 32000

JEFFREYMACHINE.COM 103
 PILOT BITS & ADAPTERS
RCP 6.5 BOLT-ON AUGER PILOT
6 1/2” Cut Diameter
.875 Bullet Teeth and CP-18 Carbide Pilot Tip
P/N 40240 CP-18 PILOT
1 1/8” - 4 UNC
P/N 40390

STANDARD DIRT PILOT - FH205

Best utilized in standard dirt applications
P/N 40000

4 3/4" CARBIDE PILOT

(2 3/8" API THREAD)
Best used in solid, non-fracturable rock
P/N 40080 (P6000)

CONSOLIDATED ROCK /
ABRASIVE SOIL PILOT
Carbide - 1656 / 1658 teeth
P/N 40050 (P1656)

Dirt - 1650 / 1652 teeth

P/N 40040 (P1650)

1 3/4" SQUARE .765

ROCK PILOT
Works well on fractured to non-
CONSOLIDATED ROCK / fractured rock. Also available with 2
ABRASIVE SOIL PILOT 3/8" API thread.
• Hard faced both sides P/N 40180

• Impact possible
P/N 40010 (FH205-HFTC)

PILOT ADAPTER PA-183-L

5” CARBIDE TIPPED DRILL HEAD Comes with a bolt and nut
5.0-TCH-171 P/N 42010

5 ” diameter carbide tipped drill head is best

used in concrete, stone, and frozen ground
P/N 40060

104 JEFFREYMACHINE.COM
2 3/8” Reg API Pilot 2 3/8” Reg API .875 .875 Dragon’s Tooth® Pilot
.875 Dragon’s Tooth® Pilot Standard Blank
P/N 40131 P/N 40122 P/N 40234

(TPB-2) 1-3/4” SQ .765 .875 1 3/4” Square

Pilot Blank (Short) Dragon’s Tooth® Pilot Blank
P/N 40170S P/N 40235

1 3/4” Cast MM1 Pilot FH-105 Pilot

P/N 40020
P/N 40192

1-3/4” SQ. DB-175 Adapter 1-3/4” SQ. DB-175-A 3 1/2” Reg API 3 1/2” Reg API Pilot FM
UTILITY DRILLING TOOLS
P/N 42020 Adapter Male Pin Adapter
P/N 42030 P/N 40430 P/N 42090

2 3/8” API Pilot 2 3/8” Reg API 2 7/8” Reg API Pilot 2 7/8” IF FM Pilot
FM Adapter Male Pin FM Adapter FM Adapter
P/N 42050 P/N 40420 P/N 42060 P/N 42070

JEFFREYMACHINE.COM 105
 KELLY BARS

KELLY BAR HEX EXTENSION SHAFTS

WITH HUB & HOLES

Part No. Hub Size Bar Size Bar Length

25025 2” 2” 72”
25075 2 1/2” 2 1/2” 72”
25130 2 5/8” 2 5/8” 72”
25140 3” 3” 72”

KELLY BAR HEX EXTENSION SHAFTS WITH HOLES

Part No. Bar Size Bar Length

25005 2” 72”
25055 2 1/2” 72”
25095 2 5/8” 72”
25145 3” 72”

*Custom lengths and combinations of hubs and kelly bars available

106 JEFFREYMACHINE.COM
DERRICK
CORE BARREL
DERRICK CORE BARREL
SPECIFICATIONS
Common Diameters: 16”, 18”, 20”, 24” (Other sizes available upon request.)
Hex Hubs: 2”, 2 1/2”, 2 5/8” and 3”
Extensions: Standard length approx. 83”. Hex connecting pin and hard-
ware included. (Length can be specified by customer.)
Barrels: 1” wall. Solid, single or double window available.
Barrel Height: Standard height is 36”. (Height can be specified by customer.)

.735CB Conical Tooth .765CB Conical Tooth

P/N 30012 P/N 30042

.875CS Conical Tooth .875 Dragon’s Tooth®

P/N 30082 P/N 30112-N

* .990 Conical and .990 Dragon’s Tooth® available for Derrick Core Barrels using 3” Hex.

.735 Holder
P/N 32011

UTILITY DRILLING TOOLS

.765 Holder
P/N 32021

.875 JeffCut® Holder

P/N 32004

JEFFREYMACHINE.COM 107
 LIGHT DUTY AUGERS
Available in sizes 6” to 48”

Diameter Part No.

LIGHT DUTY ROCK AUGER
WITH 1¾” SQUARE ROCK PILOT WITH .765 TEETH 6” 9706LDRA
• 2”, 2 1/2”, 2 5/8” hex hubs 8” 9708LDRA
• 2”, 2 9⁄16” round hubs 9” 9709LDRA
• Overall length of 42” - 48” 10” 9710LDRA
• 1” thick lower flight, 3/8” upper flight 12” 9712LDRA
14” 9714LDRA
16” 9716LDRA
18” 9718LDRA
18” LD Boring Head 20” 9720LDRA
P/N 47070
22” 9722LDRA
24” 9724LDRA
30” 9730LDRA
24” LD Boring Head
P/N 47090
36” 9736LDRA
42” 9742LDRA
48” 9748LDRA

36” LD Boring Head

P/N 47110

Diameter Dirt P/N Carbide P/N

42” LD Boring Head
P/N 47120 6” 9706LDDA 9706LDCA
8” 9708LDDA 9708LDCA
9” 9709LDDA 9709LDCA
48” LD Boring Head 10” 9710LDDA 9710LDCA
P/N 47130 12” 9712LDDA 9712LDCA
15” 9715LDDA 9715LDCA
LIGHT DUTY DIRT/CARBIDE AUGER 16” 9716LDDA 9716LDCA
WITH 35 SERIES DIRT OR CARBIDE TEETH
18” 9718LDDA 9718LDCA
• 2”, 2 1/2”, 2 5/8” hex hubs
20” 9720LDDA 9720LDCA
• 2”, 2 9⁄16” round hubs
24” 9724LDDA 9724LDCA
• Overall length of 42” - 48”
30” 9730LDDA 9730LDCA
• 3/8” thick flighting 36” 9736LDDA 9736LDCA
42” 9742LDDA 9742LDCA
48” 9748LDDA 9748LDCA

108 JEFFREYMACHINE.COM
LIGHT DUTY TEETH, PILOTS
& ACCESSORIES
13 Series

1335 Dirt Tooth 1335-HFF Carbide 1336 Carbide Insert Tooth

Application: Ordinary digging Hard Faced Tooth Application: Abrasive frozen soil
P/N 45000 Application: Abrasive frozen soil P/N 45030
P/N 45020

1337 Gauge Dirt Tooth 1338 Carbide Gauge Tooth 5T30 Chisel Point Tooth
Application: Ordinary digging Application: Abrasive frozen soil Application: Loose rock, compacted soil
P/N 45040 P/N 45110 P/N 45070

5T30-C Chisel Point Tooth

with Carbide BC58F Dirt Tooth
Application: Compacted rock, Application: Ordinary digging
abrasive soil - no impact P/N 45102

UTILITY DRILLING TOOLS

P/N 45080

1.250in Dirt Pilot (82-P2-35) 82-P2-34 LD 1.250in Sq. Pilot

P/N 46070 Adapter
P/N 46090

2 9/16in Round
Hex Hub
P/N 43060

0.625in Plow Bolt and Nut

P/N 45125

JEFFREYMACHINE.COM 109
 LIGHT DUTY
AUGER RACK

The light duty auger rack can hold up to eight augers in sizes ranging from a 3” Hex Hub to a 2”
Hex Hub. Also, if you need storage space you can have up to six drawers installed for parts and
pieces. It is meant to be mobile, so put it in the back of your work truck to have all your tools
and pieces ready to go at the jobsite.

110 JEFFREYMACHINE.COM
UTILITY DRILLING TOOLS

111
JEFFREYMACHINE.COM
 ANCHOR PLACEMENT
TOOLS & ACCESSORIES
5 1/4” BOLT CIRCLE KELLY BAR ADAPTERS
For 10,000 ft. lb. maximum installing torque
Each of these Kelly bar adapters has six holes for ½” bolts on a 5¼” bolt circle and comes with six
½” grade 5 bolts, nuts and lock washers, and bent arm pin with coil lock.

2” Kelly Bar Adapter 2 1/2” Kelly Bar Adapter 2 5/8” Kelly Bar Adapter
Shape: Hex Shape: Hex Shape: Hex
Weight: 10 lb. Weight: 10 lb. Weight: 10 lb.
Dimensions: Dimensions: Dimensions:
X: 2” Y: 5” Z: 6 1/8” X: 2 1/2” Y: 4 1/4” Z: 8 1/4” X: 2 5/8” Y: 4 1/4” Z: 8 1/4”
P/N 20350 P/N 20040 P/N 20050

STANDARD LOCKING DOG ASSEMBLY

For 10,000 ft. lb. maximum installing torque

Has six ½” holes on 5¼” bolt

circle, and includes six ½” grade
5 bolts, nuts and lock washers.
6 Bolt Locking Dog
Standard Locking Dog Replacement Kit
P/N 20090 P/N 20101

FOR SS HELICAL PIER ANCHORS

These drive tools require the appropriate Kelly bar adapter. Each comes with bolts, nuts and lock
washers, and a bent arm retaining pin with coil lock.

SS5/SS150 Anchor Series SS5/SS150/RR Drive Tool

Bolt Circle: 5 1/4” Fits 6 Bolt Locking Dog
6 Holes: 1/2” Approx. Weight: 8 lb.
Approx. Weight: 7 lb. P/N 20081
P/N 20030

SS175 Anchor Series SS5/SS150/RR Drive Tool

Bolt Circle: 7 5/8” Fits 12 Bolt Locking Dog
12 Holes: 5/8” Approx. Weight: 11 lb.
Approx. Weight: 18 lb. P/N 20231
P/N 20131

112 JEFFREYMACHINE.COM
 7 5/8” BOLT CIRCLE KELLY BAR ADAPTERS
For 15,000 ft. lb. maximum installing torque
Each of these Kelly Bar Adapters has twelve holes for 5/8” bolts on a 7 5/8” bolt circle and comes
with twelve 5/8” grade 2 bolts, nuts and lock washers, and bent arm pin with coil lock.

2 1/2” Kelly Bar Adapter 2 5/8” Kelly Bar Adapter

Shape: Hex Shape: Hex
Weight: 23 lb. Weight: 23 lb.
Dimensions: Dimensions:
X: 2 1/2” Y: 4 3/8” Z: 8 1/4” X: 2 5/8” Y: 4 3/8” Z: 8 1/4”
P/N 20140 P/N 20150

3” Kelly Bar Adapter 3” Kelly Bar Adapter

Shape: Hex Shape: Square
Weight: 27 lb. Weight: 23 lb.
Dimensions: Dimensions:
X: 3” Y: 3 1/2” Z: 8” X: 3” Y: 3 1/2” & 2 1/16” Z: 7”
P/N 20411 P/N 20451

STANDARD LOCKING DOG ASSEMBLY

For 15,000 ft. lb. maximum installing torque

12 Bolt Locking Dog 12 Bolt Locking Dog

P/N 20170 Replacement Kit

UTILITY DRILLING TOOLS

P/N 20221

ANCHOR INSTALLATION TOOLS

SAT-1 SAT-80
P/N 20345 P/N 20340

JEFFREYMACHINE.COM 113
 7 FT. DRIVE-END WRENCH

7 ft. Drive-End Wrench 7 ft. Drive-End Wrench

Red Bar Yellow Bar
Weight: 73 lb. Weight: 64 lb.
P/N 20190 P/N 20250

7 ft. Drive-End Wrench 7 ft. Drive-End Wrench

Orange Bar White Bar
Weight: 57 lb. Weight: 73 lb.
P/N 20060 P/N 20321M

Part No. Description Weight, ea.

Installs 15,000 ft.lb. (large hub) drive
string system anchors 8,000 ft.lb.
20190 73 lb.
(large hub) drive string system and all
11/2” core anchors
Hybrid drive-end wrench installs
20250 8,000 ft.lb. (large hub) anchors, 6,000 64 lb.
ft.lb. anchors, 7,000 ft.lb. anchors
Standard drive-end wrench installs 8,000
ft.lb. (small hub) anchors, 10,000 ft.lb.
20060 57 lb.
(small hub) anchors, 4,000 ft.-lb. anchors,
6,000 ft.lb. anchors
Reduced drive-end wrench installs
8,000 ft.lb. (small hub) anchors,
20321M 10,000 ft.lb. (small hub) anchors, 73 lb.
4,000 ft.lb. anchors, 6,000 ft.lb.
anchors (Fits 12 Bolt Locking Dog)

114 JEFFREYMACHINE.COM
3½ FT. DRIVE-END WRENCH

3 1/2 ft. Drive-End Wrench 3 1/2 ft. Drive-End Wrench

Red Bar Yellow Bar
Weight: 36 lb. Weight: 28 lb
P/N 20180 P/N 20240

3 1/2 ft. Drive-End Wrench

Orange Bar
Weight: 29 lb.
P/N 20070

Part No. Description Weight, ea.

Installs 15,000 ft.lb. (large hub) drive string system anchors 8,000 ft.lb. (large hub)
20180 36 lb.
drive string system and all 11/2” core anchors
Hybrid drive-end wrench installs 8,000 ft.lb. (large hub) anchors, 6,000 ft.lb.
20240 28 lb.
anchors, 7,000 ft.lb. anchors
20070 Standard drive-end wrench installs 8,000 ft.lb. (small hub) anchors, 10,000 ft.lb. 29 lb.

UTILITY DRILLING TOOLS

(small hub) anchors, 4,000 ft.lb. anchors, 6,000 ft.lb. anchors

EXTENSION WRENCHES

3 1/2 ft. Extension Wrench 3 1/2 ft. Extension Wrench 7 ft. Extension Wrench 7 ft. Extension Wrench
Red Bar Orange Bar Red Bar Orange Bar
Weight: 53 lb. Weight: 42 lb. Weight: 89 lb. Weight: 70 lb.
P/N 20200 P/N 20010 P/N 20210 P/N 20020

JEFFREYMACHINE.COM 115
 PERFORMANCE TEAM
SET-UP (PTS)
It’s quick and easy – that’s why our customers love it.
No more hunting down the anchor installation parts, or swapping the kelly bar because you no
longer need one! Everything stays pinned up to the digger drive and runs off the locking dog.

116 JEFFREYMACHINE.COM
 EXPLODED VIEW
UTILITY DRILLING TOOLS
PERFORMANCE TEAM SET-UP AUGER: PERFORMANCE TEAM SET-UP:
• Available in 16”, 18”, and 24” sizes (Other sizes available upon request) • 2 1/2” or 2 5/8” Kelly Bar adapter
• Dirt or carbide teeth • 12 Bolt Locking Dog
• Special PTS square drive box • Reduced end or red end anchor bar
• Bolt with click pin for Kelly Bar connection
• Chain with bolt and click pin
• Pin 5/8” x 6” with click pin, lanyard, swivel handle,
for auger connection

JEFFREYMACHINE.COM 117
 TRUCK ACCESSORIES

Telescopic Light Bar Assembly Threaded Pole Extractor Swivel Sheave 16,000lbs Swivel Sheave 30,000lbs
P/N 10000 P/N 10020 P/N 10045 P/N 10050

CLOSED CLOSED

OPEN OPEN

3/4” Diameter Cable Step 1 1/4” Diameter Cable Step Pull Out Step (14” X 24”) Ladder Step
Small Cable Step (4-3/4” X 12”) Large Cable Step (12” X 12”) P/N 10070 P/N 10125
P/N 10055 P/N 10060

Utility Pole Safety Light Top Load Chock Block Holder Chock Block Holder Chock Block Holder
P/N 10130 P/N 10165 Left Side Right Side
P/N 10170 P/N 10175

Hook Rack Fixed (3 Hooks) Hook Rack Swivel (3 Hooks) Hook Rack Fixed (6 Hooks) Hook Rack Swivel (6 Hooks)
P/N 10180 P/N 10185 P/N 10210 P/N 10215

118 JEFFREYMACHINE.COM
Cage Spider Reel (4-3/4” X 12”) Guy Wire Spider Reel (11” Wide) Guy Wire Basket (6” Wide) “A” Frame Spider Reel
P/N 10255 P/N 10260 P/N 10266 P/N 10280

Stand Up Spider Reel Stand Up Spider Reel Double Spider Reel Duplex-Triplex
P/N 10285 Base P/N 10295 Wire Basket
P/N 10290 P/N 10300

EXPLODED VIEW

UTILITY DRILLING TOOLS

CB Draw Bar Wire Storage Rack (Bicycle) Outrigger Pad Rack Double Trailer Jack Pivot Set
P/N 10310 P/N 10330 P/N 10395 P/N 10510

Bucket Rest Kit 4 Tube Scud Launcher CR Reel

P/N 10440 P/N 10475 P/N 10305

JEFFREYMACHINE.COM 119
120 JEFFREYMACHINE.COM
FLIGHTING
Flight Outside Diameter Flight Thickness

Pitch
Flight Inside Diameter

Strip Width

Right Hand Flighting

Left Hand Flighting

SPECIFICATIONS NEEDED TO QUOTE:

• Outside diameter • Thickness

• Pitch • Specify right or left hand flighting
• Inside diameter FLIGHTING

JEFFREYMACHINE.COM 121
122 JEFFREYMACHINE.COM
 PROUDLY
MADE IN THE USA

CORPORATE OFFICE
3841 Industrial Drive
Birmingham, AL
205.841.8600
TEXAS
817.545.8677
JeffreyMachine.com
Teeth Specifications are subject to change without notice.