GREATER CHENNAI CORPORATION
ELECTRICAL DEPARTMENT
SCHEDULE OF RATES 2020 - 21
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
BRACKETS
Cost of 1mtr curved HOT DIP GALVANIZED.SINGLE BRACKETS (1no. X 1
ED-1 NOS 1026.00
mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of 1Mtr. HOT DIP GALVANIZED Long Straight M.S.SINGLE BRACKETS
ED-2 NOS 1418.00
(1no. X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of 2.7Mtr. Long arch HOT DIP GALVANIZED SINGLE BRACKETS (1no.
ED-3 NOS 2456.00
X 2.7 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of 2Mtr. Long Straight HOT DIP GALVANIZED SINGLE BRACKETS
ED-4 NOS 2146.00
(1no. X 2 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of (1+1)mtr curved HOT DIP GALVANIZED DOUBLE BRACKETS ) (2no.
ED-5 NOS 1857.00
X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of (1+1)Mtr. Long Straight HOT DIP GALVANIZED DOUBLE
ED-6 NOS 2311.00
BRACKETS (2no. X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of (2.7+2.7)Mtr. Long arch HOT DIP GALVANIZED DOUBLE BRACKETS
ED-7 NOS 4210.00
(2no. X 2.7 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of (2+2)Mtr. Long M.S straight HOT DIP GALVANIZED DOUBLE
ED-8 NOS 3629.00
BRACKETS (2no. X 2 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of (1+1+1)mtr curved HOT DIP GALVANIZED TRIPLE BRACKETS (3no.
ED-9 NOS 2684.00
X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of (1+1+1)Mtr. Long Straight HOT DIP GALVANIZED TRIPLE
ED-10 NOS 3206.00
BRACKETS (3no. X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
Cost of (2.7+2.7+2.7)Mtr. Long Arch HOT DIP GALVANIZED TRIPLE
ED-11 NOS 5963.00
BRACKETS (3no. X 2.7 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of (2+2+2)Mtr. Long straight HOT DIP GALVANIZED TRIPLE
ED-12 NOS 5109.00
BRACKETS (3no. X 2 mtr X 60.3mm OD X 3.65mm thick bracket)
Cost of ( 1+1+1+1 )mtr curved HOT DIP GALVANIZED 4 WAY BRACKET
ED-13 NOS 3511.00
(1no. X 1 mtr X 48.3mm OD X 3.25mm thick bracket)
EARTH COIL, FUSE BOX
ED-14 Cost of G.I earth coil of 8SWG X 11.5mtr NOS 209.00
Cost of 2 core SMC Fuse box with fuse unit, SMC terminals, Glands and
ED-15 NOS 598.00
clamps, bolt & nuts(WITH TINNED COPPER CURRENT CARRING PARTS)
Cost of 4 core SMC Fuse box with fuse unit, SMC terminals, Glands and
ED-16 NOS 1078.00
clamps, bolt & nuts(WITH TINNED COPPER CURRENT CARRING PARTS)
CABLE, WIRE, HDPE PIPE
ED-17 I.SI.MARKED 2X6 SQ.MM CABLE MTR 86.40
ED-18 I.SI.MARKED 2X10SQ.MM CABLE MTR 105.20
ED-19 I.SI.MARKED 2X16SQ.MM CABLE MTR 114.20
ED-20 I.SI.MARKED 2X25SQ.MM CABLE MTR 129.70
ED-21 I.SI.MARKED 4X6SQ.MM CABLE MTR 111.90
ED-22 I.SI.MARKED 4X10 SQ.MM CABLE MTR 122.70
ED-23 I.SI.MARKED 4X16 SQ.MM CABLE MTR 161.70
ED-24 I.SI.MARKED 3 1/2X25 SQ.MM CABLE MTR 195.50
ED-25 I.SI.MARKED 31/2X35 SQ.MM CABLE MTR 230.10
ED-26 I.SI.MARKED 31/2X50 SQ.MM CABLE MTR 299.80
ED-27 I.SI.MARKED 31/2X70 SQ.MM CABLE MTR 384.50
ED-28 I.SI.MARKED 31/2X95 SQ.MM CABLE MTR 497.70
ED-29 I.SI.MARKED 31/2X120 SQ.MM CABLE MTR 607.90
ED-30 I.SI.MARKED 31/2X150 SQ.MM CABLE MTR 720.00
ED-31 I.SI.MARKED 31/2X185 SQ.MM CABLE MTR 879.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ED-32 I.SI.MARKED 31/2X240 SQ.MM CABLE MTR 1115.00
ED-33 I.SI.MARKED 31/2X300 SQ.MM CABLE MTR 1368.00
ED-34 I.SI.MARKED 31/2X400 SQ.MM CABLE MTR 1744.00
5CX4 sqmm insulated multistrandad flexible copper Trailing Flat/round cable
ED-35 MTR 225.00
for High mast lighting
5CX6 sqmm insulated multistrandad flexible copper Trailing Flat/round cable
ED-36 MTR 345.00
for High mast lighting
8CX2.5 sqmm insulated multistrandad flexible copper Trailing Flat cable for
ED-37 MTR 220.00
High mast lighting
3CX1 sqmm insulated multistrandad flexible copper Trailing Flat/round cable
ED-38 MTR 40.00
for High mast lighting
3CX1.5 sqmm insulated multistrandad flexible copper Trailing Flat/round cable
ED-39 MTR 57.30
for High mast lighting
3CX2.5 sqmm insulated multistrandad flexible copper Trailing Flat/round cable
ED-40 MTR 75.00
for High mast lighting
HDPE PLAIN PIPE OF SIZE 50MMX2.8MM THICK WITH SILICON COATING
ED-41 MTR 95.00
( ALL COLOUR EXCEPT BLACK )
HDPE DOUBLE WALLED CORRUGATED(DWC) PIPE OF SIZE 50 MM O.D
ED-42 MTR 101.00
X 38MM I.D ( ORANGE(OR)BLUE COLOUR )
HDPE DOUBLE WALLED CORRUGATED(DWC) PIPE OF SIZE 90 MM O.D
ED-43 MTR 208.00
X 76 MM I.D ( ORANGE(OR)BLUE COLOUR )
ED-44 COUPLER FOR (50 MM O.D HDPE DWC PIPE NOS 45.00
ED-45 COUPLER FOR (63MM O.D HDPE DWC PIPE NOS 55.00
Cost of supply of Double wall corregated duct 120/103.5mm - Orange or Blue
ED-46 METRE 259.50
colour ( to be used instead of HUME PIPE)
CABLE LAYING
CARTING AND LAYING OF ONE METER LT CABLE 75 CM BELOW THE
ED-47 MTR 129.00
GROUND LEVEL WITH 45 CM WIDTH WITH OUT SAND FILLING
LAYING OF CABLE UPTO 120 SQ MM IN ROAD CROSSING THROUGH 4''
ED-48 NOS 441.00
DIA HUME PIPE
TERMINATION OF IN AND OUT CABLE IN THE FUSE BOX (FOR 2C X 25
ED-49 NOS 154.00
SQ MM CABLE FOR IN AND OUT CABLE )
TERMINATION OF IN AND OUT CABLE IN THE FUSE BOX (FOR 4C X 25
ED-50 NOS 200.00
SQ MM CABLE FOR IN AND OUT CABLE )
ED-51 FIXING OF IN AND OUT CABLE BY CLAMPING ON THE LAMP POST NOS 205.00
BREAKING OF EXISTING CONCRETE PEDESTAL AND CONSTRUCTION
ED-52 OF NEW PLAIN CEMENT CONCRETE PEDESTAL (FOR 2 / 3 / 6 / 7 MTR NOS 619.00
LAMP POST )
BREAKING OF EXISTING CONCRETE PEDESTAL AND CONSTRUCTION
ED-53 OF NEW PLAIN CEMENT CONCRETE PEDESTAL (FOR 8 / 9 / 9.5 / 11 / NOS 762.00
MTR LAMP POST )
CONSTRUCTION OF NEW PLAIN CEMENT CONCRETE PEDESTAL (FOR
ED-54 NOS 506.00
2 / 3 / 6 / 7 MTR LAMP POST )
CONSTRUCTION OF NEW PLAIN CEMENT CONCRETE PEDESTAL (FOR
ED-55 NOS 612.00
8 / 9 / 9.5 / 11 MTR LAMP POST )
Laying of cable IN Center median THROUGH 50 MM DIA.OD H.D.PE.
ED-56 PIPE including carting of cable & H.D.P.E Pipe ( Trench size 45 cm width MTR 90.00
X 40 cm Depth)
Labour for laying of cable at Bridge portion through 50 MM DIA.OD
ED-57 H.D.PE. PIPE including carting of cable & carting of H.D.P.E. Pipe MTR 149.00
including MS Clamp,saddle with screws and nuts
FIXING OF 1 NO. OF 2 CORE SMC FUSE BOX ON THE STREET LAMP
ED-58 NOS 50.00
POST
FIXING OF 1 NO. OF 4 CORE SMC FUSE BOX ON THE STREET LAMP
ED-59 NOS 65.00
POST
ED-60 PEDESTAL WHITE WASHING FOR 2 / 3 mtr LAMP POST NOS 13.00
ED-61 PEDESTAL WHITE WASHING FOR 6 / 7 mtr LAMP POST NOS 18.00
ED-62 PEDESTAL WHITE WASHING FOR O.H / 8 / 9.5 / 11 mtr LAMP POST NOS 23.00
ROAD CUTTING BY MECHANIZED TOOL INCLUDING CARTING &
ED-63 MTR 735.00
DRAWAL OF CABLE & HDPE DWC PIPE
ED-64 TRENCH LESS ROAD CUTTING NOS 2502.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
LAYING OF CABLE ALONG ROAD / STREET THROUGH 50mm O D, H.D.P.E. PIPE
ED-65 MTR 211.00
(TRENCH SIZE 45CM WIDTH X 75 CM DEPTH)
Labour for laying of cable through HDPE pipe ( 50 mm OD ) in plain
cement concrete road including braking of cement concrete road & Filling
ED-66 of plain cement concrete mix of 1:1.5:3 ( with 12 mm jelly ) INCLUDING MTR 217.00
CARTING OF CABLE & HDPE PIPE (TRENCH SIZE 100mm BREADTH X
150mm DEPTH )
CABLE JOINT, CABLE FAULT
MAKING 1 NO. 2 C X 25 SQ MM UG CABLE JOINT WITH OUT JOINT
ED-67 NOS 2194.00
BOXES ( LT COMPOUND CONVENTIONAL JOINT)
MAKING 1 NO 4 C X 25 SQ MM UG CABLE JOINT WITH OUT JOINT
ED-68 NOS 2407.00
BOXES ( LT COMPOUND)
ED-69 TRIAL PIT (FOR LOCATING CABLE FAULT) (FOR NORMAL SOIL) EACH 41.00
ED-70 TRIAL PIT (FOR LOCATING CABLE FAULT) (FOR TAR ROAD) EACH 104.00
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR NORMAL SOIL)
ED-71 (FOR 2 X 25 SQ.MM ALUMINIUM U.G CABLE) EACH 668.00
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR NORMAL SOIL)
ED-72 (FOR 4 X 25 SQ.MM ALUMINIUM U.G CABLE) EACH 851.00
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR NORMAL SOIL)
ED-73 EACH 1686.00
(FOR 3 1/2 X 120 SQ.MM ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR TAR ROAD)
ED-74 EACH 774.00
(FOR 2 X 25 SQ.MM ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR TAR ROAD)
ED-75 EACH 957.00
(FOR 4 X 25 SQ.MM ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS (FOR TAR ROAD)
ED-76 EACH 1792.00
(FOR 3 1/2 X 120 SQ.MM ALUMINIUM U.G CABLE)
JOINTING OF BURNT OUT (IN or OUT) CABLE ON STREET LAMP POST
WITH CRIMPING JOINT USING FERULES WITH COVERING OF PVC PIPE
ED-77 BIT WITH FILLING OF EPOXY L.T COMPOUND (FOR 2 X 25 SQ.MM EACH 438.00
CABLE) (FOR ONE IN or OUT CABLE)
JOINTING OF BURNT OUT (IN or OUT) CABLE ON STREET LAMP POST
WITH CRIMPING JOINT USING FERULES WITH COVERING OF PVC PIPE
ED-78 BIT WITH FILLING OF EPOXY L.T COMPOUND (FOR 4 X 25 SQ.MM EACH 600.00
CABLE) (FOR ONE IN or OUT CABLE)
TRIAL PIT (FOR LOCATING CABLE FAULT) (FOR CEMENT CONCRETE
ED-79 ROAD) (ONLY AT THE PORTION OF CEMENT CONCRETE) EACH 116.00
CABLE FAULT RECTIFICATION & CABLE JOINTS(FOR CEMENT
CONCRETE ROAD) (ONLY AT THE PORTION OF CEMENT CONCRETE)
ED-80 EACH 794.00
(FOR 2 X 25 SQ.MM ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS(FOR CEMENT
CONCRETE ROAD) (ONLY AT THE PORTION OF CEMENT CONCRETE)
ED-81 EACH 977.00
(FOR 4 X 25 SQ.MM ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS(FOR CEMENT
CONCRETE ROAD) (ONLY AT THE PORTION OF CEMENT CONCRETE)
ED-82 EACH 1812.00
(FOR 3 1/2 X 120 SQ.MM ALUMINIUM U.G CABLE)
TRIAL PIT (FOR LOCATING CABLE FAULT)
ED-83 (FOR CEMENT CONCRETE ROAD PORTION & WITH NORMAL EARTH EACH 390.00
PORTION BELOW CEMENT CONCRETE PORTION)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
CABLE FAULT RECTIFICATION & CABLE JOINTS
(FOR CEMENT CONCRETE ROAD PORTION & WITH NORMAL EARTH
ED-84 PORTION BELOW CEMENT CONCRETE PORTION) (FOR 2 X 25 SQ.MM EACH 1250.00
ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS
(FOR CEMENT CONCRETE ROAD PORTION & WITH NORMAL EARTH
ED-85 PORTION BELOW CEMENT CONCRETE PORTION) (FOR 4 X 25 SQ.MM EACH 1433.00
ALUMINIUM U.G CABLE)
CABLE FAULT RECTIFICATION & CABLE JOINTS(FOR CEMENT
CONCRETE ROAD PORTION & WITH NORMAL EARTH PORTION BELOW
ED-86 CEMENT CONCRETE PORTION)) (FOR 3 1/2 X 120 SQ.MM ALUMINIUM EACH 2260.00
U.G CABLE)
PAINTING, NUMBERING,
WORK - MATERIAL AND LABOUR FOR NUMBERING OF STREET LAMP
ED-87 NOS 37.00
POST
ONE COAT OF ALUMINIUM PAINT for OLD 2 / 3 Mtr GARDEN POST
ED-88 INCLUDING COST OF ALUMINIUM PAINT AND LABOUR - (POST TOP NOS 46.00
LANTERN )
ONE COAT OF ALUMINIUM PAINT for OLD 2 / 3 Mtr GARDEN POST
ED-89 WITH 1 Mtr SINGLE CURVED BRACKET INCLUDING COST OF NOS 63.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 2 /3 Mtr GARDEN POST
ED-90 WITH 1 Mtr DOUBLE CURVED BRACKET INCLUDING COST OF NOS 76.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 2 / 3 Mtr GARDEN POST
ED-91 WITH 1 Mtr TRIPLE CURVED BRACKET INCLUDING COST OF NOS 89.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 2 / 3 Mtr GARDEN POST
ED-92 WITH 1 Mtr FOUR WAY CURVED BRACKET INCLUDING COST OF NOS 103.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7 Mtr STREET LAMP POST
ED-93 WITH 1 Mtr STRAIGHT SINGLE BRACKET INCLUDING COST OF NOS 186.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7Mtr STREET LAMP POST
ED-94 WITH 1 Mtr STRAIGHT DOUBLE BRACKET INCLUDING COST OF NOS 205.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7Mtr STREET LAMP POST
ED-95 WITH 1 Mtr STRAIGHT TRIPLE BRACKET INCLUDING COST OF NOS 221.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7 Mtr STREET LAMP POST
ED-96 WITH 1 Mtr STRAIGHT FOUR WAY BRACKET INCLUDING COST OF NOS 237.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7Mtr STREET LAMP POST
ED-97 WITH 2.7 Mtr ARCH SINGLE BRACKET INCLUDING COST OF ALUMINIUM NOS 219.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7 Mtr STREET LAMP POST
ED-98 WITH 2.7 Mtr ARCH DOUBLE BRACKET INCLUDING COST OF NOS 264.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7 Mtr STREET LAMP POST
ED-99 WITH 2.7 Mtr ARCH TRIPLE BRACKET INCLUDING COST OF ALUMINIUM NOS 310.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 6 / 7 Mtr STREET LAMP POST
ED-100 WITH 2.7 Mtr ARCH FOUR WAY BRACKET INCLUDING COST OF NOS 355.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-101 WITH 2 Mtr STRAIGHT SINGLE BRACKET INCLUDING COST OF NOS 361.00
ALUMINIUM PAINT AND LABOUR
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-102 WITH 2 Mtr STRAIGHT DOUBLE BRACKET INCLUDING COST OF NOS 394.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-103 WITH 2 Mtr STRAIGHT TRIPLE BRACKET INCLUDING COST OF NOS 432.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-104 WITH 2 Mtr STRAIGHT FOUR WAY BRACKET INCLUDING COST OF NOS 470.20
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-105 WITH 2.7 Mtr ARCH SINGLE BRACKET INCLUDING COST OF ALUMINIUM NOS 364.50
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-106 WITH 2.7 Mtr ARCH DOUBLE BRACKET INCLUDING COST OF ALUMINIUM NOS 409.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-107 WITH 2.7 Mtr ARCH TRIPLE BRACKET INCLUDING COST OF ALUMINIUM NOS 454.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 8 Mtr STREET LAMP POST
ED-108 WITH 2.7 Mtr ARCH FOUR WAY BRACKET INCLUDING COST OF NOS 499.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-109 WITH 2 Mtr STRAIGHT SINGLE BRACKET INCLUDING COST OF NOS 389.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-110 WITH 2 Mtr STRAIGHT DOUBLE BRACKET INCLUDING COST OF NOS 427.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-111 WITH 2 Mtr STRAIGHT TRIPLE BRACKET INCLUDING COST OF NOS 465.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-112 WITH 2 Mtr STRAIGHT FOUR WAY BRACKET INCLUDING COST OF NOS 503.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-113 WITH 2.7 Mtr SINGLE ARCH BRACKET INCLUDING COST OF ALUMINIUM NOS 397.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-114 WITH 2.7 Mtr DOUBLE ARCH BRACKET INCLUDING COST OF NOS 442.00
ALUMINIUM PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-115 WITH 2.7 Mtr TRIPLE ARCH BRACKET INCLUDING COST OF ALUMINIUM NOS 487.00
PAINT AND LABOUR
ONE COAT OF ALUMINIUM PAINT for OLD 9.2 Mtr STREET LAMP POST
ED-116 WITH 2.7 Mtr FOUR WAY ARCH BRACKET INCLUDING COST OF NOS 532.00
ALUMINIUM PAINT AND LABOUR
PAINTING OF BUSBAR PILLAR BOX WITH SINGLE COAT OF ALUMINIUM
ED-117 NOS 299.00
PAINT ( BOTH INTERRIOTR & EXTERIOR)
PAINTING OF KIOSK PILLAR BOX WITH SINGLE COAT OF ALUMINIUM
ED-118 NOS 331.00
PAINT ( BOTH INTERRIOTR & EXTERIOR)
PILLAR
ED-119 Cost of SMC Loop pillar box NOS 3558.00
ED-120 Cost of Erection of SMC loop pillar box NOS 622.00
ED-121 Cost of BUS BAR pillar box NOS 14660.00
ED-122 Cost of Erection of BUS BAR pillar box NOS 4761.00
ED-123 Cost of KIOSK pillar box NOS 21200.00
ED-124 Cost of Erection of KIOSK pillar box NOS 4761.00
LAMP POST & PILLAR REMOVAL, REFIXING,
SHIFTING
LABOUR FOR REMOVAL AND REFIXING OF 1 NO OF EL POST ( WITH
ED-125 NOS 5966.00
OUT JOINT) FOR IN AND OUT SYSTEM ( 2C X 25 SQ MM CABLE)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
LABOUR FOR REMOVAL AND REFIXING OF 1 NO OF 6 / 7 MT LONG
ED-126 STREET LAMP POST WITH OUT JOINT FOR IN AND OUT SYSTEM ( 2C X NOS 5060.00
25 SQ MM CABLE)
LABOUR FOR REMOVAL AND REFIXING OF 1 NO OF 6 / 7 MT LONG
ED-127 STREET LAMP POST WITH OUT JOINT FOR IN AND OUT SYSTEM ( 4C X NOS 5106.00
25 SQ MM CABLE)
LABOUR FOR REMOVAL AND REFIXING OF OH / 9.5 / 11 MT LONG
ED-128 STREET LAMP POST WITH OUT JOINT FOR IN AND OUT SYSTEM ( 4C X NOS 6901.00
25 SQ MM CABLE)
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF ONE NO
ED-129 OF EL / OH / 9.5 / 11 MT TUBULAR STREET LAMP POST WITH OUT NOS 3011.00
CABLE JOINT
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF ONE NO
ED-130 NOS 2005.00
OF 6 / 7 MT TUBULAR STREET LAMP POST WITH OUT CABLE JOINT
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF MILD
ED-131 STEEL LOOP PILLAR BOX AND CARTING THE SAME TO THE NOS 1550.00
CONCERNED STORES
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF BUS BAR /
ED-132 KIOSK PILLAR BOX AND CARTING THE SAME TO THE CONCERNED NOS 2502.00
STORES
ED-133 SHIFTING OF ONE NO OF EL POST NOS 5060.00
SHIFTING OF ONE NO OF 6 / 7 MT TUBULAR LAMP POST (FOR 70 W
ED-134 NOS 4153.00
SVL)
SHIFTING OF ONE NO OF 6 / 7 MT TUBULAR LAMP POST (FOR 150 W
ED-135 NOS 4199.00
SVL)
SHIFTING OF ONE NO OF OH / 9.5 / 11 MT TUBULAR LAMP POST (FOR
ED-136 NOS 5541.00
250 W SVL)
SHIFTING OF ONE NO MILD STEEL LOOP PILLAR BOX WITH
ED-137 NOS 3773.00
TERMINATION OF CABLE
SHIFTING OF ONE NO MILD STEEL BUS BAR /KIOSK PILLAR BOX WITH
ED-138 NOS 5198.00
TERMINATION OF CABLE
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF 6 MTR.
ED-139 LAMP POST INCLUDING BRACKET & FITTING ( ANCHOR BOLT TYPE NOS 1104.00
FOUDATION TYPE )
LABOUR FOR DISCONNECTION OF CABLE AND REMOVAL OF 8 / 9 MTR.
ED-140 LAMP POST INCLUDING BRACKET & FITTING ( ANCHOR BOLT TYPE NOS 1347.00
FOUDATION TYPE )
ELECTRIFICATION
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed
Copper conductor cable of 1100V grade in suitable PVC rigid pipe on
wall and ceiling with PVC accessories with TW switch box inflush with
ED-141 wall with 5A F.T. switch, covered with hylum sheet of 3mm thick with POINT 1763.00
painting of suitable colour, with continuous earth wire connection of 14
SWG TC wire for open PVC light point / fan point (For electronic
Regulator)
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed
Copper conductor cable of 1100V grade in suitable PVC rigid pipe on
wall and ceiling with PVC accessories with TW switch box and 5A
ED-142 POINT 1000.00
F.T. switch with painting of suitable Colour for open PVC light point /
fan point (For electroic regulator) ( 6 points per coil)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu.
Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall
and ceiling with PVC accessories in flush with wall with 3mm thick
hylum sheet cover with TW switch box and 5A F.T switch with
ED-143 POINT 2457.00
continuous earth wire connection of 14 SWG TC wire for making good
of the concealed portion with suitable colour for PVC concealed light
point / Fan point (For electronic regulator).
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed
Copper conductor cable of 1100V grade in suitable PVC rigid pipe
concealed in wall and ceiling with PVC accessories inflush with wall
with 3mm thick hylum sheet cover with TW switch box and 5A F.T.
ED-144
switch and making good of the concealed portion with suitable Colour POINT 1427.00
for PVC concealed light (6 points Per coil) (For Rooms like Bath,
Toilet & Pump room etc.)
Wiring with 3x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and
ceiling with PVC accessories with TW switch box with 5A F.T. switch
ED-145 (Two way) in flush with wall and covered with hylem sheet of 3 mm POINT 2287.00
thick with painting of suitable colour with continuous earth wire
connection of 14 SWG TC wire, for open PVC staircase light point
Wiring with 3 x 1.5sqmm(22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in
wall and ceiling with PVC accessories in flush with wall with 3mm thick
ED-146 hylem sheet covered TW switch box and 5A F.T. switch (Two way) POINT 2463.00
with continuous earth wire connection by 14 SWG TC wire and making
good of the concealed portion with suitable colour. for concealed
staircase light point.
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and
ceiling with PVC accessories with 150 mm x 100 mm x 113mm TW
ED-147 switch box in flush with wall with 3 mm thick Hylem sheet cover for 5 POINT 926.00
A 3 pin non inter locking CS socket with painting of suitable colour
with continuous earth wire connection of 14 SWG TC wire for open
PVC plug point.
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in
wall and ceiling with PVC accessories, in flush with wall, with 150mm x
100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover
for 5 A 3 pin non inter locking CS socket with continuous earth wire POINT 1261.00
ED-148
connection of 14 SWG TC wire and making good of the concealed
portion with suitable colour for concealed PVC plug point.
Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed
Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe
concealed in wall and ceiling with PVC accessories, in flush with wall,
with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem
ED-149 POINT 1587.00
sheet for 15 A 3 pin non inter locking CS socket with continuous
earth wire connection of 14 SWG TC wire , and making good of the
concealed portion, with suitable colour for concealed power plug
point
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed
Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe on wall
and ceiling with PVC accessories with 150mm x100mm x113mm TW
ED-150 switch box in flush with wall with 3mm thick hylem sheet cover for 15 POINT 1253.00
A 3 pin flush type non inter locking CS socket with painting of
suitable colour with continuous earth wire connection of 14 SWG TC
wire for open PVC power plug point.
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable open PVC
ED-151 MTR 126.00
rigid pipe on wall and ceiling with continuous earth wire connection
14 SWG TC wire with painting of suitable colour.
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in
ED-152 wall and ceiling with continuous earth wire connection of 14SWG TC MTR 177.00
wire and making good of the concealed portion with suitable colour
Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable open PVC
ED-153 MTR 172.00
rigid pipe on wall and ceiling with continuous earth wire connection of
14 SWG TC wire with painting of suitable colour
Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe
ED-154 concealed in wall and ceiling with continuous earth wire connection MTR 222.00
of 14SWG TC wire and making good of the concealed portion with
suitable colour
Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable open PVC
ED-155 MTR 204.00
rigid pipe on wall and ceiling with continuous earth wire connection of
14 SWG TC wire with painting of suitable colour
Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe
ED-156 concealed in wall and ceiling with contiinuous earth wire connection of MTR 254.00
14SWG TC wire and making good of the concealed portion with
suitable colour
Supply and run of 4 of 4sqmm (56/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable open PVC
ED-157 MTR 249.00
rigid pipe on wall and ceiling with continuous earth wire connection of
14 SWG TC wire with painting of suitable colour
Supply and run of 4 of 4sqmm (56/0.3) PVC insulated SC
unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe
ED-158 concealed in wall and ceiling with continuous earth wire connection of MTR 297.00
14 SWG TC wire and making good of the concealed portion with
suitable colour
Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC
unsheathed Cu Conductor of 1100 V grade in suitable open PVC rigid
ED-159 MTR 319.00
pipe on wall and ceiling with continuous earth Wire connection of 14
SWG TC wire with painting of suitable colour.
Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC
unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe
ED-160 concealed in wall and ceiling with continuous earth wire connection by MTR 374.00
14 SWG TC wire and making good of the concealed portion with
suitable colour
ED-161 Supply and run of 1 of No.8 SWG GI wire for earth connection. MTR 21.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Supply and run of 25mm x 3mm tinned copper flat with necessary
ED-162 clamps / supports on wall / floor / ground for earth connection MTR 380.00
Supply and run of 25mm x 6mm tinned copper flat with necessary
ED-163 clamps / supports on wall / floor / ground for earth connection MTR 651.00
Supply and fixing of WT bulk head fitting with guard (Reputed make)
ED-164 NOS 549.00
suitable for 11W CFL lamp with CFL
Supply and fixing of surface mount patty type 1 x 36 watt T.L fitting
complete with electronic ballast with TW round blocks on wall or
ED-165 NOS 409.00
ceiling with flu tube with PVC unsheathed Copper leads from terminals
to the fitting.
Supply and fixing of 1000 W automatic electric water heater of 25 litres
ED-166 capacity suitable for 230V 50 c/s AC supply on suitable MS clamps NOS 6161.00
with 3 core flex wire, but without plumping work
Supply and fixing of 1500 watts automatic Electric Water Heater of 35
ED-167 litres capacity suitable for 230V 50 c/s AC supply on suitable MS NOS 6952.00
Clamps with 3 core flex wire but without plumping connection
Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230
ED-168 Volts 50 c/s single phase AC supply on suitable TW Board with push NOS 715.00
switch.
Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with
ED-169 double ball bearing , down rod, canopy complete set (with out speed NOS 1815.00
regulator) ( ON EXISTING CLAMP WITH 300 MM DOWN PIPE )
Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with
ED-170 double ball bearing , down rod, canopy complete set (with out speed NOS 1854.00
regulator) ( ON EXISTING CLAMP WITH 700 MM DOWN PIPE )
Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with
double ball bearing , down rod, canopy complete set (with out speed
ED-171 regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH NOS 1991.00
SIDE PLATE AND 45 cm. ( 18" ) CROSS ARM WITH 300 MM DOWN
PIPE )
Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with
double ball bearing , down rod, canopy complete set (with out speed
ED-172 regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH NOS 2014.00
SIDE PLATE AND 45 cm. ( 18" ) CROSS ARM WITH 700 MM DOWN
PIPE )
Supply of 16" ( 400mm ) sweep size PEDESTAL FAN of adjustable
ED-173 NOS 1818.00
height
ED-174 Supply of 16" ( 400mm ) sweep size WALL MOUNTING FAN NOS 1620.00
Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan
ED-175 complete with necessary wall opening and making good of the wall NOS 1834.00
Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan
ED-176 NOS 1635.00
complete without provision of hole in the wall
Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan
ED-177 NOS 1871.00
complete with necessary wall opening and making of the wall
Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan
ED-178 NOS 1672.00
complete without provision of holes in the wall
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan
ED-179 complete with necessary wall opening and making good of the wall. NOS 2374.00
Supply and fixing of 450 mm( l8") sweep (light duty) AC Exhaust fan
ED-180 NOS 2175.00
complete without provision of hole in the wall
Supply and fixing of TNEB meter Board suitable for 32A Single Phase
service connection with 32A Fuse unit (500V) 32A neutral link and
earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm
ED-181 x 19mm with supporting TW reepers of 1" thick an either side with SET 746.00
painting with suitable bolt and nuts for fixing the TW plank on wall with
earth connection and inter connection with 7/20 PVC insulated copper
wire from EB meter to fuse unit.
Supply and fixing of TNEB meter Board suitable for 32A Three Phase
service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link
and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x
450mm x 19mm with supporting TW reepers of 1" thick an either side
ED-182
with painting with suitable bolt and nuts for fixing the TW plank on wall SET 1661.00
with earth connection and inter connection with 7/20 PVC insulated
copper wire from EB meter to fuse unit.
Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A
service connection made up of suitable angle iron frame work of size 2
feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly
fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm
ED-183 thickness with necessary bolts and nuts supports and supply and fixing SET 3875.00
of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of
size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16
PVC insulated copper wire with earth connection complete
Supply and fixng of TNEB Moter Board suitable for 3 Phases 100A
service connection made up of suitable angle iron frame work of size 2
feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly
fixed on wall covered with hylem sheet of size 2 feet x 1 1/2 feet of
ED-184 12mm thickness with necessary bolts and nuts supports and supply SET 4672.00
and fixing of 3 Nos 100A fuse units (500V) 1 No. Neutral link, copper
earth flat of size 1" x 1/4" with inter connection of EB meter to fuse
units by 7/16 PVC insulated copper wire with earth connection
complete
Supply and fixng of TNEB Moter Board suitable for 3 Phases 200A
service connection made up of suitable angle iron frame work of size 3
feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed
on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm
ED-185 thickness with necessary bolts and nuts supports and supply and fixing SET 7114.00
of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of
size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16
PVC insulated copper wire with earth connection complete
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall
ED-186 NOS 293.00
socket with 5A flush type switch on suitable TW box
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall
ED-187 socket with 5A flush type switch concealed in suitable M.S box in NOS 402.00
flush with wall
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Supply and fixing of 5 A 3 Pin and 2 pin combined flush type wall
socket with 5A flush type switch concealed in suitable MS box in
ED-188 NOS 410.50
flush with wall and concealed with 3mm thick hylem sheet.
Supply and fixing of 5A / 15A 3 pin combined flush type wall socket
ED-189 NOS 363.00
with 15A flush type switch on suitable TW Box
Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket
ED-190 with 15A flush type switch concealed in suitable MS Box in flush NOS 473.00
with wall with paintig
Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket
ED-191 with 15A flush type switch concealed in suitable MS Box in flush NOS 481.00
with wall and covered with 3 mm thick hylem sheet
Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush
type wall socket with control switches concealed in suitable TW
ED-192 NOS 508.00
Box covered with Hylem sheet in flush with wall with earth connection
(For Computer Plug Socket)
Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure
ED-193 with 32A DP MCB in flush with wall with earth connection (For AC NOS 1803.00
Plug) [ ISI marked / Reputed make]
ED-194 Supply and fixing of 16 Amps DP Switch of 500 V with matal clad with NOS 818.00
fuse and
Supply neutral
and fixing(Side
of 32Handle)
Amps DP on Switch
suitableofTW Board
500 V withwith earth
metal clad with
ED-195 fuse and neutral (Side Handle) on suitable TW Board , with earth NOS 1241.00
connection only
Supply and fixing of 4 way Single Phase DB of 16 A / way with 16
ED-196 Amps DP Switch with metal clad of 500 V (Side Handle) with F & N on NOS 1885.00
suitable TW Board with earth connection only.
Supply and fixing of 4way SP DB of 16A / Way with 16A DP switch with
metal clad of 500 V (Side Handle) F&N on suitable angle iron frame
ED-197 NOS 2283.00
work with trunking box MS cable entry box with earth connection.
Supply and fixing of 6 way SP DB of 16 A / way with 16 A DP switch
ED-198 with metal clad of 500 V (Side Handle) with F & N on suitable TW NOS 2052.00
Board with PWD Earth connection only
Supply and fixing of 8 way SP DB of 16 A / way with 16 A DP switch
ED-199 with Metal clad of 500 V with F & N on (Front Handle) on suitable TW NOS 2199.00
Board with Earth connection only.
Supply and fixing of 6 way SP DB of 16 A / way with 16 A DPIC switch
of 500 V with F & N (Front Handle) on suitable angle iron frame work
ED-200 NOS 2448.00
with trunking box MS cable entry box with earth connection only
Supply and fixing of 4 way SP DB of 16 A / way with 32 A DP switch
ED-201 with metal clad of 500 V with F & N (Side Handle) on suitable TW NOS 2308.00
Board with earth connection.
Supply and fixing of 8 way SP DB with 32A DP Switch with metal clad
ED-202 of 500V with F & N (Side Handle) on suitable TW Board with earth NOS 2622.00
connection only.
Supply and fixing of 8 way SP DB of 16 A / way with 32 A DP switch
with metal clad of 500 V with F & N (Side Handle) on suitable angle
ED-203 NOS 3625.00
iron frame work with trunking box with earth connection only
Supply and fixing of 16 A TPN Metal clad switch on suitable angle iron
ED-204 frame work with MS cable entry boxes with earth connection only. NOS 2955.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Supply and fixing of 32 A TPNMC switch on suitable angle iron frame
ED-205 NOS 3372.00
work with MS cable entry box with earth connection only
Supply and fixing of 63A TPN MC switch with suitable angle iron frame
ED-206 NOS 5100.00
work with MS cable entry boxes with earth connection only.
Supply and fixing of 100 Amps TPN sheet double break switch with
ED-207 HRC fuse and neutral on suitable angle iron frame work with earth NOS 8147.00
connection only.
Supply and fixing of 200 Amps TPN sheet steel double break switch
ED-208 with HRC fuses and neutral on suitable angle Iron frame work with MS NOS 10549.00
cable entry boxes and with earth connection only
Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A
DPMC Switch (Front Handle) as outgoing with suitable adoptor box
ED-209 with suitable MS cable entry box trunking boxes and internal NOS 6281.00
connections on internal connections on suitable AI frame work with
earth connection
Supply and fixing of 3 Phase 4 wire ICDB of 16 A per way, with 32 A
TPN MC switch with suitable trunking box MS cable entry boxes and
ED-210 NOS 5342.00
internal connection on suitable angle, iron frame work with earth
connection only.
Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way
with 63 Amps TPN MC switch with suitable trunking box MS cable
ED-211 NOS 7891.00
entry boxes, and internal connections, on suitable angle iron frame
work with earth connection only
Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with
100 A TPN MC switch with suitable trunking box MS cable entry boxes
ED-212 NOS 10614.00
and internal connection on suitable angle iron frame work with earth
connection
Earthing as per the ISI specification with an earth electrode of 2.1mt
class 'B' GI pipe of dia not less than 40mm, with copper earth plate of
ED-213 size 125mm x 50mm x 6mm, with necessary funneling arrangements NOS 2337.00
with necessary masonry work and with 38mm RCC cover slab for the
brick masonry .
Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class
ED-214 'B' GI pipe of dia not less than 32mm complete with necessary NOS 2003.00
masonry work
Supply & Fixing of Brass cable gland for 2 x 4 sq.mm LT, UG
ED-215 NOS 215.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 2 x 6 sq.mm LT, UG
ED-216 NOS 220.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 2 x 10 sq.mm LT, UG
ED-217 NOS 224.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 2 x 16 sq.mm LT, UG
ED-218 NOS 237.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 2 x 25 sq.mm LT, UG
ED-219 NOS 245.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 4 x 25 sq.mm LT, UG
ED-220 NOS 245.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 25 sq.mm LT, UG
ED-221 NOS 340.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 35 sq.mm LT, UG
ED-222 NOS 352.70
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 50 sq.mm LT, UG
ED-223 NOS 352.70
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 70 sq.mm LT, UG
ED-224 NOS 463.00
Armoured Cable with earth connection
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Supply & Fixing of Brass cable gland for 3 1/2 x 95 sq.mm LT, UG
ED-225 NOS 480.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 120 sq.mm LT, UG
ED-226 NOS 504.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 150 sq.mm LT, UG
ED-227 NOS 541.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 185 sq.mm LT, UG
ED-228 NOS 573.10
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 240 sq.mm LT, UG
ED-229 NOS 668.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 300 sq.mm LT, UG
ED-230 NOS 703.00
Armoured Cable with earth connection
Supply & Fixing of Brass cable gland for 3 1/2 x 400 sq.mm LT, UG
ED-231 NOS 795.00
Armoured Cable with earth connection
ED-232 Clamping of 2 x 6 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-233 Clamping of 2 x 10 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-234 Clamping of 2 x 16 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-235 Clamping of 2 x 25 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-236 Clamping of 4 x 6 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-237 Clamping of 4 x 10 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
ED-238 Clamping of 4 x 16 sq.mm L.T UG Cabl on wall with MS Clamp MTR 138.00
Clamping of 3 1/2 x 25 / 4 x 25 sq.mm L.T UG Cabl on wall with MS
ED-239 MTR 171.00
Clamp
ED-240 MTR 171.00
Clamping of 3 1/2 x 35 sq.mm L.T UG Cabl on wall with MS Clamp
ED-241 MTR 171.00
Clamping of 3 1/2 x 50 sq.mm L.T UG Cabl on wall with MS Clamp
ED-242 MTR 171.00
Clamping of 3 1/2 x 70 sq.mm L.T UG Cabl on wall with MS Clamp
ED-243 MTR 171.00
Clamping of 3 1/2 x 95 sq.mm L.T UG Cabl on wall with MS Clamp
ED-244 MTR 205.00
Clamping of 3 1/2 x 120 sq.mm L.T UG Cabl on wall with MS Clamp
ED-245 MTR 205.00
Clamping of 3 1/2 x 150 sq.mm L.T UG Cabl on wall with MS Clamp
ED-246 MTR 205.00
Clamping of 3 1/2 x 185 sq.mm L.T UG Cabl on wall with MS Clamp
ED-247 MTR 205.00
Clamping of 3 1/2 x 240 sq.mm L.T UG Cabl on wall with MS Clamp
ED-248 MTR 205.00
Clamping of 3 1/2 x 300 sq.mm L.T UG Cabl on wall with MS Clamp
ED-249 MTR 205.00
Clamping of 3 1/2 x 400 sq.mm L.T UG Cabl on wall with MS Clamp
End Termination of 3 1/2 x 25 / 4 x 25 sq.mm LT UG Aluminium
ED-250 NOS 253.00
cables with aluminium Lugs
End Termination of 3 1/2 x 35 sq.mm LT UG Aluminium cables with
ED-251 NOS 257.00
aluminium Lugs
End Termination of 3 1/2 x 50 sq.mm LT UG Aluminium cables with
ED-252 NOS 262.00
aluminium Lugs
End Termination of 3 1/2 x 70 sq.mm LT UG Aluminium cables with
ED-253 NOS 269.00
aluminium Lugs
End Termination of 3 1/2 x 95 sq.mm LT UG Aluminium cables with
ED-254 NOS 431.00
aluminium Lugs
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
End Termination of 3 1/2 x 120 sq.mm LT UG Aluminium cables with
ED-255 NOS 442.00
aluminium Lugs
End Termination of 3 1/2 x 150 sq.mm LT UG Aluminium cables with
ED-256 NOS 454.00
aluminium Lugs
End Termination of 3 1/2 x 185 sq.mm LT UG Aluminium cables with
ED-257 NOS 468.00
aluminium Lugs
Supply & installation of Split type 1.5 TON Air conditioner ( 3 Star
ED-258 NOS 31100.00
rating )
Supply & installation of Split type 1.5 TON Air conditioner ( 5 Star
ED-259 NOS 41400.00
rating )
Supply & installation of Split type 2 TON Air conditioner ( 3 Star rating
ED-260 NOS 41400.00
)
ED-261 NOS 4160.00
4kva stablizer of copper wound (Double Booster)
ED-262 5kva stablizer of copper wound (Double Booster) NOS 4625.00
ED-263 Out door angle for Split type Air Conditioner for all capacity ( if required ) MTR 1020.00
ED-264 Additional copper Tube for Split type Air Conditioner for all capacity MTR 880.00
( if required )
MODULAR WIRING with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed
Copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling
with PVC accessories with painting of suitable colour, with continuous earth wire
connection of 14 SWG TC wire for open PVC light point / fan point (For electronic
ED-265 Regulator) ( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR POINT 1726.00
PLATED M.S BOX, MODULAR MCB shall be added) (For these accessories
items, provision shall be made separately which are separately included in the
schedule of rates from L432 TO L730 and L730 & L731)
MODULAR WIRING with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc
Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC
accessories with painting of suitable colour for open PVC light point / fan point (For
ED-266 electronic regulator)( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, POINT 1442.00
MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For these
accessories items, provision shall be made separately which are separately
included in the schedule of rates from L432 TO L730 and L730 & L731)
MODULAR WIRING with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu.
Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with
PVC accessories in flush with wall with continuous earth wire connection of 14 SWG
TC wire for making good of the concealed portion with suitable colour for PVC
ED-267
concealed light point / Fan point (For electronic regulator).( WIRING FOR MODULAR
POINT 2420.00
SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall
be added) (For these accessories items, provision shall be made separately which are
separately included in the schedule of rates from L432 TO L730 and L730 & L731)
MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu.
Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with
PVC accessoires with making good of the concealed portion with suitable colour for
PVC concealed light point / fan point (For electronic regulator) ( WIRING FOR
ED-268 MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, POINT 2071.00
MODULAR MCB shall be added) (For these accessories items, provision shall be
made separately which are separately included in the schedule of rates from
L432 TO L730 and L730 & L731)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu.
Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with
PVC accessoires with making good of the concealed portion with suitable colour for
PVC concealed light point / fan point (For electronic regulator) ( WIRING FOR
ED-269 MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, POINT 1337.00
MODULAR MCB shall be added) (For these accessories items, provision shall be
made separately which are separately included in the schedule of rates from
L432 TO L730 and L730 & L731)
MODULAR WIRING with 3x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC
accessories with painting of suitable colour with continuous earth wire connection of 14
SWG TC wire, for open PVC staircase light point ( WIRING FOR MODULAR
ED-270 SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB POINT 2205.00
shall be added) (For these accessories items, provision shall be made
separately which are separately included in the schedule of rates from L432 TO
L730 and L730 & L731)
MODULAR WIRING with 3x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC
accessories with in flush with wall with painting of suitable colour for open PVC
ED-271 staircase light point ( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, POINT 1904.00
MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For these
accessories items, provision shall be made separately which are separately
included in the schedule of rates from L432 TO L730 and L730 & L731)
MODULAR WIRING with 3 x 1.5sqmm(22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling
with PVC accessories in flush with wall with continuous earth wire connection by 14
SWG TC wire and making good of the concealed portion with suitable colour. for
ED-272 concealed staircase light point. ( WIRING FOR MODULAR SWITCHES,MODULAR POINT 2381.00
PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (For
these accessories items, provision shall be made separately which are
separately included in the schedule of rates from L432 TO L730 and L730 & L731)
MODULAR WIRING with 3 x 1.5sqmm(22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling
with PVC accessories in flush with wall and making good of the concealed portion with
suitable colour for concealed staircase light point.( WIRING FOR MODULAR
ED-273 SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB POINT 2070.00
shall be added) (For these accessories items, provision shall be made
separately which are separately included in the schedule of rates from L432 TO
L730 and L730 & L731)
MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC
accessories with painting of suitable colour with continuous earth wire connection of 14
SWG TC wire for open PVC 5Amp/ 3pin plug point. ( WIRING FOR MODULAR
ED-274 SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB POINT 860.00
shall be added) (For these accessories items, provision shall be made
separately which are separately included in the schedule of rates from L432 TO
L730 and L730 & L731)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
MODULAR WIRING with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed
Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling
with PVC accessories, in flush with wall with continuous earth wire connection of 14
SWG TC wire and making good of the concealed portion with suitable colour for
ED-275 concealed PVC 5Amp / 3pin plug point.( WIRING FOR MODULAR POINT 1195.00
SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB
shall be added) (For these accessories items, provision shall be made
separately which are separately included in the schedule of rates from L432 TO
L730 and L730 & L731)
MODULAR WIRING with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed
Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and
ceiling with PVC accessories, in flush with wall with continuous earth wire connection
of 14 SWG TC wire , and making good of the concealed portion, with suitable colour
ED-276 for concealed 15 Amp / 3 pin power plug point ( WIRING FOR MODULAR POINT 1451.00
SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB
shall be added) (For these accessories items, provision shall be made
separately which are separately included in the schedule of rates from L432 TO
L730 and L730 & L731)
MODULAR WIRING with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed
Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with
PVC accessories with painting of suitable colour with continuous earth wire
connection of 14 SWG TC wire for open PVC 15 Amp / 3pin power plug point. (
ED-277
WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S
POINT 1116.00
BOX, MODULAR MCB shall be added) (For these accessories items, provision
shall be made separately which are separately included in the schedule of rates
from L432 TO L730 and L730 & L731)
ED-278 5 / 6 amp Modular switch Single way NOS 56.50
ED-279 5 / 6 amp Modular staircase switch Double way NOS 66.60
ED-280 15 / 16 amp Modular switch Single way NOS 82.70
ED-281 5 / 6 amp Modular 5 pin socket NOS 85.80
ED-282 15 / 16 amp Modular 5 pin socket NOS 130.20
ED-283 6 to 32 Amp Modular MCB NOS 98.00
ED-284 Modular fan speed reulator(stepped type) NOS 241.00
ED-285 One module Plated G.I Box concealed tpe) NOS 27.50
ED-286 2 module Plated / G.I Box concealed tpe) NOS 27.50
ED-287 4 module Plated / G.I Box concealed tpe) NOS 38.90
ED-288 On6 module Plated / G.I Box concealed tpe) NOS 61.70
ED-289 8 module Plated / G.I Box concealed tpe) NOS 75.50
ED-290 12 module Plated / G.I Box concealed tpe) NOS 101.60
ED-291 16 module Plated / G.I Box concealed tpe) NOS 101.60
ED-292 18 module Plated / G.I Box concealed tpe) NOS 115.40
ED-293 Modular plate for the above one modular box (concealed) NOS 45.40
ED-294 Modular plate for the above 2 modular box (concealed) NOS 47.00
ED-295 Modular plate for the above 4 modular box (concealed) NOS 63.30
ED-296 Modular plate for the above 6 modular box (concealed) NOS 89.30
ED-297 Modular plate for the above 8 modular box (concealed) NOS 113.70
ED-298 Modular plate for the above 12 modular box (concealed) NOS 143.10
ED-299 Modular plate for the above 18 modular box (concealed) NOS 179.50
ED-300 dummy for Modular plate NOS 16.00
ED-301 FLUORESCENT TUBULAR LAMP Cool Day light 4 Ft. 36 Watts NOS 34.80
ED-302 FLUORESCENT TUBULAR LAMP Cool Day light 4 Ft. 40 Watts NOS 35.60
ED-303 CONDENSOR FOR S.V. / M.V. LAMP 8 Mfd for 80 Watts Bulb NOS 102.40
ED-304 CONDENSOR FOR S.V. / M.V. LAMP 10 Mfd for 125 Watts Bulb NOS 122.60
ED-305 CONDENSOR FOR S.V. / M.V. LAMP 15 Mfd for 250 Watts Bulb NOS 163.30
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ED-306 CONDENSOR FOR S.V. / M.V. LAMP 20 Mfd for 400 Watts Bulb NOS 225.90
ED-307 Ceiling Rose NOS 13.60
ED-308 Fan clamp (dia 12mm) with 6mm MS side plates & 45 cm cross arm NOS 108.80
ED-309 Call bell / Buzzer 6 mm suitable for AC / DC NOS 40.90
ED-310 Push bell Switch NOS 16.35
ED-311 Gong bell 9" size suitable for 250V NOS 409.00
ED-312 Gong bell 12" size suitable for 250V NOS 592.00
ED-313 A.C Exhaust Fan 225mm (9") sweep (Light duty) NOS 1047.00
ED-314 A.C Exhaust Fan 300mm (12") sweep (Light duty) NOS 1197.00
ED-315 A.C Exhaust Fan 375mm (15") sweep (Light duty) NOS 1234.00
ED-316 A.C Exhaust Fan 450mm (18") sweep (Light duty) NOS 1737.00
ED-317 A.C Exhaust Fan 375mm (15") sweep (Heavy duty) NOS 2281.00
ED-318 A.C Exhaust Fan 450mm (18") sweep (Heavy duty) NOS 2836.00
ED-319 5 Amps (flush type) NOS 15.89
ED-320 5 Amps (Flush type staircase) NOS 19.75
ED-321 16 Amps DP switch with metal clad (Front handle) NOS 409.00
ED-322 32 Amps DP switch with metal clad (Front handle) NOS 839.00
ED-323 16 Amps DP switch with metal clad (side handle) NOS 338.00
ED-324 32 Amps DP switch with metal clad (side handle) NOS 761.00
100 Amps TPN Switch with HRC fuses sheet steel double break (side
ED-325 NOS 5755.00
Handle)
125 Amps TPN Switch with HRC fuses sheet steel double break (side
ED-326 NOS 6310.00
Handle)
200 Amps TPN Switch with HRC fuses sheet steel double break (side
ED-327 NOS 8157.00
Handle)
315 Amps TPN Switch with HRC fuses sheet steel double break (side
ED-328 NOS 11570.00
Handle)
400 Amps TPN Switch with HRC fuses sheet steel double break (side
ED-329 NOS 14900.00
Handle)
16 Amps TPN Metal clad switch with rewirable fuse units. (side
ED-330 NOS 873.00
Handle)
ED-331 32 Amps TPN Metal clad switch with rewirable fuse units.(side Handle) NOS 1290.00
63 Amps TPN Metal clad switch with rewirable fuse units. (side
ED-332 NOS 2810.00
Handle)
ED-333 100 Amps Metal clad switch with rewirable fuse units. (side Handle) NOS 5533.00
ED-334 200 Amps Metal clad switch with rewirable fuse units. (side Handle) NOS 8400.00
63A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-335 NOS 3555.00
steel enclosure with HRC fuses double break
100A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-336 NOS 5979.00
steel enclosure with HRC fuses double break
125A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-337 NOS 7059.00
steel enclosure with HRC fuses double break
200A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-338 NOS 8867.00
steel enclosure with HRC fuses double break
250A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-339 NOS 11059.00
steel enclosure with HRC fuses double break
315A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-340 NOS 13261.00
steel enclosure with HRC fuses double break
400A TPN switch SWITCH DISCONNECTOR FUSE UNITS in sheet
ED-341 NOS 15210.00
steel enclosure with HRC fuses double break
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
63A TPN switch disconnector fuse units interior only with HRC fuses
ED-342 NOS 2349.00
Double break.(INTERIOR FOR CUBICAL)
100A TPN switch disconnector fuse units interior only with HRC fuses
ED-343 NOS 4272.00
Double break. (INTERIOR FOR CUBICAL)
125A TPN switch disconnector fuse units interior only with HRC fuses
ED-344 NOS 5827.00
Double break. (INTERIOR FOR CUBICAL)
200A TPN switch disconnector fuse units interior only with HRC fuses
ED-345 NOS 7519.00
Double break.(INTERIOR FOR CUBICAL)
250A TPN switch disconnector fuse units interior only with HRC fuses
ED-346 NOS 9797.00
Double break (INTERIOR FOR CUBICAL).
315A TPN switch disconnector fuse units interior only with HRC fuses
ED-347 NOS 12322.00
Double break.(INTERIOR FOR CUBICAL)
400A TPN switch disconnector fuse units interior only with HRC fuses
ED-348 NOS 14533.00
Double break.(INTERIOR FOR CUBICAL)
ED-349 16 Amps Porcelain Fuse unit (500V) NOS 47.20
ED-350 32 Amps Porcelain Fuse unit (500V) NOS 83.60
ED-351 63 Amps Porcelain Fuse unit (500V) NOS 186.60
ED-352 100 Amps Porcelain Fuse unit (500V) NOS 337.00
ED-353 200 Amps Porcelain Fuse unit (500V) NOS 545.00
SINGLE PHASE 4 Way DB 16 Amps / Way with fuse & Neutral each
ED-354 NOS 454.00
(250V)
SINGLE PHASE 6 Way DB 16 Amps / Way with fuse & Neutral each
ED-355 NOS 619.00
(250V)
SINGLE PHASE 8 Way DB 16 Amps / Way with fuse & Neutral each
ED-356 NOS 766.00
(250V)
ED-357 THREE PHASE 4 Way TPDB 16A / Way with fuse & Neutral link NOS 1792.00
ED-358 THREE PHASE6 Way TPDB 16A / Way with fuse & Neutral link NOS 2454.00
ED-359 THREE PHASE 8 Way TPDB 16A / Way with fuse & Neutral link NOS 2969.00
ED-360 THREE PHASE 4 Way TPDB 32A / Way with fuse & Neutral link NOS 2267.00
ED-361 THREE PHASE 6 Way TPDB 32A / Way with fuse & Neutral link NOS 3033.00
ED-362 THREE PHASE 8 Way TPDB 32A / Way with fuse & Neutral link NOS 3836.00
ED-363 THREE PHASE 4 Way TPDB 63A / Way with fuse & Neutral link NOS 5305.00
ED-364 THREE PHASE 6 Way TPDB 63A / Way with fuse & Neutral link NOS 6824.00
ED-365 16 Amps three phase 500V 4 pole Change over switch NOS 1234.00
ED-366 32 Amps three phase 500V 4 pole Change over switch NOS 1462.00
ED-367 63 Amps three phase 500V 4 pole Change over switch NOS 3194.00
ED-368 100 Amps three phase 500V 4 pole Change over switch NOS 5077.00
ED-369 200 Amps three phase 500V 4 pole Change over switch NOS 9552.00
ED-370 250 Amps three phase 500V 4 pole Change over switch NOS 20216.00
ED-371 400 Amps three phase 500V 4 pole Change over switch NOS 30886.00
ED-372 5 Amps 3 pin & 2 pin combined flush type wall socket only. NOS 23.70
ED-373 5 Amps / 15 Amps 3 pin flush type wall socket only. NOS 53.50
ED-374 5 Amps 3 pin Top. NOS 33.60
ED-375 15 Amps 3 pin Top NOS 47.60
ED-376 15 Amps Flush type switch NOS 55.50
ED-377 10 Amps M.C plug with 3 pin top NOS 177.30
ED-378 20 Amps M.C plug with 3 pin top NOS 202.00
14 / 0.3 (1 sqmm) MULTI STRANDED Fire Retardant Flexible Copper
ED-379 MTR 8.55
Cable With ISI mark IS 694 /1990
22 / 0.3 (1.5 sqmm) MULTI STRANDED Fire Retardant Flexible
ED-380 MTR 13.50
Copper Cable With ISI mark IS 694 /1990
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
36 / 0.3 (2.5 sqmm) MULTI STRANDED Fire Retardant Flexible
ED-381 MTR 21.00
Copper Cable With ISI mark IS 694 /1990
56 / 0.3 (4 sqmm) MULTI STRANDED Fire Retardant Flexible Copper
ED-382 MTR 33.30
Cable With ISI mark IS 694 /1990
84 / 0.3 (6 sqmm) MULTI STRANDED Fire Retardant Flexible Copper
ED-383 MTR 49.30
Cable With ISI mark IS 694 /1990
140 / 0.3 (10 sqmm) MULTI STRANDED Fire Retardant Flexible
ED-384 MTR 74.20
Copper Cable With ISI mark IS 694 /1990
101 / 0.45 (16 sqmm) MULTI STRANDED Fire Retardant Flexible
ED-385 MTR 121.30
Copper Cable With ISI mark IS 694 /1990
168/0.45 (25 sqmm) MULTI STRANDED Fire Retardant Flexible
ED-386 MTR 266.50
Copper Cable With ISI mark IS 694 /1990
ED-387 Hand drawn copper conductor (Guage No. 8 & 6) KGS 500.00
ED-388 14 SWG TC wire KGS 513.00
ED-389 G.I.No.8 wire and No. 6 wire KGS 82.60
ED-390 Cable gland suitable for 2 core 4 sq.mm UG cable. NOS 18.00
ED-391 Cable gland suitable for 2 core 6 sq.mm UG cable. NOS 22.50
ED-392 Cable gland suitable for 2 core 10 sq.mm UG cable. NOS 26.90
ED-393 Cable gland suitable for 2 core 16 sq.mm UG cable. NOS 39.80
ED-394 Cable gland suitable for 2 core 25 sq.mm UG cable. NOS 47.60
ED-395 Cable gland suitable for 31/2 core 25 sq.mm UG cable. NOS 47.60
ED-396 Cable gland suitable for 31/2 core 35 sq.mm UG cable. NOS 60.50
ED-397 Cable gland suitable for 31/2 core 50 sq.mm UG cable. NOS 60.50
ED-398 Cable gland suitable for 31/2 core 70 sq.mm UG cable. NOS 74.60
ED-399 Cable gland suitable for 31/2 core 95 sq.mm UG cable. NOS 91.10
ED-400 Cable gland suitable for 31/2 core 120 sq.mm UG cable. NOS 116.00
ED-401 Cable gland suitable for 31/2 core 150 sq.mm UG cable. NOS 152.70
ED-402 Cable gland suitable for 31/2 core 185 sq.mm UG cable. NOS 180.60
ED-403 Cable gland suitable for 31/2 core 240 sq.mm UG cable. NOS 180.60
ED-404 Cable gland suitable for 31/2 core 300 sq.mm UG cable. NOS 215.70
ED-405 Cable gland suitable for 31/2 core 400 sq.mm UG cable. NOS 306.90
ED-406 Cable gland suitable for 31/2 core 500 sq.mm UG cable. NOS 357.80
ED-407 Cable gland suitable for 4 core 6 sq.mm UG cable. NOS 22.50
ED-408 Cable gland suitable for 4 core 10 sq.mm UG cable. NOS 26.90
ED-409 Cable gland suitable for 4 core 25 sq.mm UG cable. NOS 47.60
ED-410 4 Way Neutral link 15 AMPS EACH 24.80
ED-411 6 Way Neutral link 15 AMPS EACH 36.70
ED-412 8 Way Neutral link 15 AMPS EACH 45.80
ED-413 12 Way Neutral link 15 AMPS EACH 66.60
ED-414 M.S.Box of size (100 x 100 x 75 mm) WITH PAINTING EACH 39.70
ED-415 M.S.Box of size (150 x 100 x 75 mm) WITH PAINTING EACH 54.90
ED-416 M.S.Box of size (200 x 150 x 75 mm) WITH PAINTING EACH 89.30
M.S. Box complete with Lock & Key arrangements with painting of size
ED-417 EACH 270.00
(300 x 200 x 100mm)
ED-418 MS ANGLES 1 1/2" x 1 1/2" x 1/4" (37.5x37.5x6.24mm) (1M = 3.25 Kg) KGS 44.70
ED-419 MS ANGLES 1 1/2" x 1 1/2" x 1/2" (37.5x 37.5x12.5mm) KGS 44.70
ED-420 MS ANGLES 2" x 2" x 1/2" (50 x 50 x 12.5mm) KGS 44.70
ED-421 Aluminium Flat (1" x 1/4") (25 x 6.25mm) KGS 155.80
ED-422 Aluminium Flat (1" x 1/8") KGS 155.80
ED-423 Copper Flat (25 x 3mm) KGS 458.00
ED-424 Copper Flat (25 x 6mm) KGS 458.00
ED-425 Copper Flat (33 x 6mm) KGS 458.00
ED-426 Copper Flat (50 x 6mm) KGS 458.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Power capacitor for power factor improvement with oil filled with
ED-427 discharge resistance 3 phase 415 / 440V 50 HZ conforming to KVAR 312.00
ISS:2384 with ISI marking.
ED-428 P.V.C COUPLING 50mm (2") NOS 9.81
ED-429 Hylem sheet 3mm Thick SQM 563.00
ED-430 T.W. Box concealed type 12"x8"x3" NOS 69.90
ED-431 T.W. Box concealed type 8"x6"x3" NOS 37.10
ED-432 T.W. Box concealed type 6"x4"x3" NOS 16.50
ED-433 T.W. Box concealed type 4"x4"x3" NOS 13.80
ED-434 T.W.Round blocks. NOS 5.58
ED-435 4.0 Sq.mm Aluminium LUG NOS 1.27
ED-436 6.0 Sq.mm Aluminium LUG NOS 1.42
ED-437 10.0 Sq.mm Aluminium LUG NOS 1.84
ED-438 16.0 Sq.mm Aluminium LUG NOS 1.84
ED-439 25.0 Sq.mm Aluminium LUG NOS 2.80
ED-440 35.0 Sq.mm Aluminium LUG NOS 3.70
ED-441 50.0 Sq.mm Aluminium LUG NOS 5.55
ED-442 70.0 Sq.mm Aluminium LUG NOS 7.40
ED-443 95.0 Sq.mm Aluminium LUG NOS 8.40
ED-444 120.0 Sq.mm Aluminium LUG NOS 11.25
ED-445 150.0 Sq.mm Aluminium LUG NOS 15.00
ED-446 185.0 Sq.mm Aluminium LUG NOS 19.60
ED-447 225.0 Sq.mm Aluminium LUG NOS 29.10
ED-448 240.0 Sq.mm Aluminium LUG NOS 31.90
ED-449 300.0 Sq.mm Aluminium LUG NOS 44.10
ED-450 400.0 Sq.mm Aluminium LUG NOS 65.90
ED-451 Single Pole 6 A to 32A, 10KA EACH 126.00
ED-452 Single Pole 40A, 10KA EACH 263.00
ED-453 Single Pole & Neutral 6 A to 32A,10KA EACH 382.00
ED-454 Single Pole & Neutral 40A,10KA EACH 530.00
ED-455 Double Pole 6 A to 32A,10KA EACH 420.00
ED-456 Double Pole 40A,10KA EACH 576.00
ED-457 Triple Pole 6 A to 32A,10KA EACH 635.00
ED-458 Triple Pole 63A,10KA EACH 1011.00
ED-459 Triple Pole & Neutral 6 A to 32A,10KA EACH 827.00
ED-460 Triple Pole & Neutral 63A,10KA EACH 1275.00
ED-461 Four Pole 6 A to 32A,10KA EACH 886.00
ED-462 Four Pole 63A,10KA EACH 1358.00
ED-463 10 Amps 30 MA DP RCCB / ELCB NOS 1737.00
ED-464 25 Amps 30 MA DP RCCB / ELCB NOS 1492.00
ED-465 40 Amps 30 MA DP RCCB / ELCB NOS 1576.00
ED-466 25 Amps 30 MA RCCB / ELCB FP NOS 1840.00
ED-467 40 Amps 30 MA RCCB / ELCB FP NOS 1882.00
ED-468 63 Amps 30 MA RCCB / ELCB FP NOS 2136.00
ED-469 16 Amps HRC - FUSE NOS 29.50
ED-470 32 Amps HRC - FUSE NOS 49.50
ED-471 63 Amps HRC - FUSE NOS 62.40
ED-472 125 Amps HRC - FUSE NOS 138.40
ED-473 160 Amps HRC - FUSE NOS 186.60
ED-474 200 Amps HRC - FUSE NOS 186.60
ED-475 250 Amps HRC - FUSE NOS 275.70
ED-476 32A D.P MCB ISOLATOR NOS 265.60
ED-477 32A T.P MCB ISOLATOR NOS 444.00
ED-478 32A F.P MCB ISOLATOR NOS 508.00
ED-479 40A D.P MCB ISOLATOR NOS 254.00
ED-480 40A T.P MCB ISOLATOR NOS 467.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ED-481 40A F.P MCB ISOLATOR NOS 570.00
ED-482 63A D.P MCB ISOLATOR NOS 323.00
ED-483 63A T.P MCB ISOLATOR NOS 509.00
ED-484 63A F.P MCB ISOLATOR NOS 595.00
ED-485 100 A D.P MCB ISOLATOR NOS 417.00
ED-486 100 A T.P MCB ISOLATOR NOS 663.00
ED-487 100 A F.P MCB ISOLATOR NOS 725.00
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
ED-488 for accommadating one no. of 4 pole ELCB / RCD with lable holder and EACH 3615.00
provisions for taking up cable for size not less than 35 sq.mm (WITH METAL
DOOR COVER ) No. of ways out going12 way (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD for the following D.B) {M.S Angle Iron of size 1
1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH
SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 6 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-489 EACH 4095.00
provisions for taking up cable for size not less than 35 sq.mm (WITH METAL
DOOR COVER) No. of ways out going18way (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 8 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-490 provisions for taking up cable for size not less than 35 sq.mm No. of ways out EACH 4940.00
going 24 way (WITH METAL DOOR COVER ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE ) ( THE ABOVE D.B
SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-491 EACH 5953.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 36 way (WITH METAL DOOR COVER )(seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-492 EACH 4452.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 12 way (WITH ACRYLIC DOOR COVER) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 6 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-493 EACH 5059.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 18 way (WITH ACRYLIC DOOR COVER) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD for the following D.B) {M.S Angle Iron of size 1
1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH
SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 8 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-494 EACH 6018.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 24 way(WITH ACRYLIC DOOR COVER) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
ED-495 for accommadating one no. of 4 pole ELCB / RCD with lable holder and EACH 8058.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 36 way(WITH ACRYLIC DOOR COVER) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD for the following D.B) {M.S Angle Iron of size 1
1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH
SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-496 EACH 8203.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 12 way (WITH INDUSTRIAL TYPE)(seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 6 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-497
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
EACH 9511.00
going18way (WITH ACRYLIC TYPE)(seperateprovision shall be given forMCBs,
Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 ) {M.S Angle
Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL BE PRE
WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 8 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
ED-498 for accommadating one no. of 4 pole ELCB / RCD with lable holder and EACH 10565.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 24 way (WITH INDUSTRIAL TYPE)(seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP54 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-499 EACH 13780.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 36 way (WITH INDUSTRIAL TYPE)(seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-500 EACH 6284.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 12way (WITH METAL DOOR COVER ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 8 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-501 EACH 7631.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 24way (WITH METAL DOOR COVER ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-502 EACH 8894.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 36 way (WITH METAL DOOR COVER ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
ED-503 for accommadating one no. of 4 pole ELCB / RCD with lable holder and EACH 8369.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 12 way (WITH ACRYLIC DOOR COVER ) (seperateprovision shall be given
for MCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting}
SUPPLY & FIXING OFVERTICAL THREE PHASE DISTRIBUTION BOARD MODULE
TYPE WITH IP 42 PROTECTION 8way TPMCB sheet steel distribution board flush
type / surface type fitted with bus bars and neutral links with single / three phase
MCB out goings and separate 4 way provision for accommodating one no. of 4
pole incomming MCB Isolator and another separate 4 way provision for
accommadating one no. of 4 pole ELCB / RCD with lable holder and provisions
ED-504
for taking up cable for size not less than 35 sq.mm No. of ways out oing 24 way(
EACH 10471.00
WITH ACRYLIC DOOR COVER ) (seperateprovision shall be given forMCBs,
Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 ) {M.S Angle
Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL BE PRE
WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 42 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-505 EACH 13217.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going 36 way (WITH ACRYLIC DOOR COVER ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 4 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-506 EACH 11942.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
going12 way (WITH INDUSTRIAL TYPE ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 8 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-507 EACH 14354.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
oing 24 way (WITH INDUSTRIAL TYPE )(seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF VERTICAL THREE PHASE DISTRIBUTION BOARD
MODULE TYPE WITH IP 54 PROTECTION 12 way TPMCB sheet steel distribution
board flush type / surface type fitted with bus bars and neutral links with single /
three phase MCB out goings and separate 4 way provision for accommodating
one no. of 4 pole incomming MCB Isolator and another separate 4 way provision
for accommadating one no. of 4 pole ELCB / RCD with lable holder and
ED-508 EACH 18511.00
provisions for taking up cable for size not less than 35 sq.mm No. of ways out
oing36 way (WITH INDUSTRIAL TYPE ) (seperateprovision shall be given
forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 & L731 )
{M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B SHALL
BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE
WITH IP 42 PROTECTION 4 way TPMCB sheet steel distribution board flush type
/ surface type fitted with bus bars and neutral links with single / three phase
MCB out goings and separate 4 way provision for accommodating one no. of 4
pole incomming MCB Isolator and another separate 4 way provision for
accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [
3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12
ED-509 EACH 7468.00
nos. ] for sub incommers in 3 segments with lable holder and provisions for
taking up cable for size not less than 35 sq.mm (NO OF INCOMER 12 WAY, NO
OF OUT GOING 12 WAY)( WITH METAL / ACRYLIC DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCDin Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE
WITH IP 42 PROTECTION 6 way TPMCB sheet steel distribution board flush type
/ surface type fitted with bus bars and neutral links with single / three phase
MCB out goings and separate 4 way provision for accommodating one no. of 4
pole incomming MCB Isolator and another separate 4 way provision for
accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [
3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12
ED-510 EACH 8180.00
nos. ] for sub incommers in 3 segments with lable holder and provisions for
taking up cable for size not less than 35 sq.mm (NO OF INCOMER 12 WAY, NO
OF OUT GOING 18 WAY)( WITH METAL / ACRYLIC DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE
WITH IP 42 PROTECTION 8 way TPMCB sheet steel distribution board flush type
/ surface type fitted with bus bars and neutral links with single / three phase
MCB out goings and separate 4 way provision for accommodating one no. of 4
pole incomming MCB Isolator and another separate 4 way provision for
accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [
3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12
ED-511
nos. ] for sub incommers in 3 segments with lable holder and provisions for
EACH 8872.00
taking up cable for size not less than 35 sq.mm ((NO OF INCOMER 12 WAY, NO
OF OUT GOING 24 WAY)( WITH METAL ACRYLIC DOOR COVER)
seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF 7 SEGMENTS ( 3 TIRE ) THREE PHASE MODULE TYPE
WITH IP 42 PROTECTION 12 way TPMCB sheet steel distribution board flush
type / surface type fitted with bus bars and neutral links with single / three phase
MCB out goings and separate 4 way provision for accommodating one no. of 4
pole incomming MCB Isolator and another separate 4 way provision for
accommadating one no. of 4 pole ELCB / RCD [ totally 8 ways in one segment ] [
3 x 4 ways in each segment ] and separate provision for MCB Isolator [ totally 12
ED-512 EACH 9545.00
nos. ] for sub incommers in 3 segments with lable holder and provisions for
taking up cable for size not less than 35 sq.mm ((NO OF INCOMER 12 WAY, NO
OF OUT GOING 36 WAY)( WITH METAL / ACRYLIC DOOR COVER )
seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 4 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-513 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 1027.00
sq.mm ( NO OF OUT GOING 4 WAY)(WITH METAL DOOR COVER ) (
seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting}( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 8 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-514 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 1334.00
sq.mm ( NO OF OUT GOING 8WAY) (WITH METAL DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 12 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-515 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 1574.00
sq.mm (NO OF OUT GOING 12 WAY) (WITH METAL DOOR COVER )
seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 4 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-516 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 1495.00
sq.mm ( NO OF OUT GOING 4WAY)(WITH ACRYLICL DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY & FIXING OF 8 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-517 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 1776.00
sq.mm ( NO OF OUT GOING 8 WAY)(WITH ACRYLIC DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) ( THE ABOVE D.B SHALL BE PRE WIRED WITH
SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF 12 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-518 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 2051.00
sq.mm ( NO OF OUT GOING 12 WAY)(WITH ACRYLIC DOOR COVER )
(seperateprovision shall be given forMCBs, Isolators, ELCB / RCD in Sch. No.
L432 TO L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4"
Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC
COPPER WIRE )
SUPPLY & FIXING OF 4 way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP54 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-519 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 3126.00
sq.mm ( NO OF OUT GOING 4 WAY))( INDUSTRIAL TYPE)seperateprovision shall
be given forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 &
L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE
D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF8way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP54 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-520 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 3679.00
sq.mm (NO OF OUT GOING 8WAY))( INDUSTRIAL TYPE)( seperateprovision shall
be given forMCBs, Isolators, ELCB / RCD in Sch. No. L432 TO L457 and L730 &
L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} ( THE ABOVE D.B
SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )
SUPPLY & FIXING OF 12way vertical SPMCB sheet steel distribution board flush
type / surface type MODULE TYPE WITH IP54 PROTECTION fitted with bus bars
and neutral links with single phase MCB out goings and separate 2 way
provision for accommodating one no. of 2 pole incomming MCB Isolator and
another separate 2 way provision for accommadating one no. of 2 pole ELCB /
ED-521 RCD with lable holder and provisions for taking up cable for size not less than 35 EACH 4170.00
sq.mm ( NO OF OUT GOING 12 WAY))( INDUSTRIAL TYPE)seperateprovision
shall be given forMCBs, Isolators, ELCB / RCD for the D.B in Sch. No. L432 TO
L457 and L730 & L731 ) {M.S Angle Iron of size 1 1/2" x 1 1/2" x 1/4" Mounting} (
THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER
WIRE )
Supply of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable
ED-522 for 9 W / 11W CFL lamp with CFL NOS 347.80
ED-523 Supply of 48" ( 1200 mm ) sweep size 5 star rating Ceiling fan with out regulator NOS 1284.00
Supply & installation of Split type 2 TON Air conditioner ( 5 Star rating
ED-524 NOS 52800.00
)
ED-525 SURFACE MOUNT PATTY TYPE 1X36 WATT TL FITTING(Electronic choke ) NOS 175.00
Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and
ED-526 EACH 636.00
LED tube)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Cost of supply of 20w 4 feet LED fitting with LED tube complete set (Patty and
ED-527 EACH 742.00
LED tube)
Cost of supply of 4 feet 18w LED tube ( retrofit to existing 36/40w tube-wiring
ED-528 EACH 384.30
to be changed)
ED-529 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED EACH 3474.00
ED-530 18W LED 3000K Square Type Recessed Fitting with LED EACH 1358.00
ED-531 18W LED 3000K Round Type Recessed Fitting with LED EACH 1234.00
TIMER
SUPPLY OF 40 AMP / 1Phase Analogue single dial AUTOMATIC STREET
ED-532 LIGHTING ON / OFF CONTROLLING TIMER UNITS as per departmental EACH 6800.00
specification
FIXING OF ABOVE 40 AMP / 1Phase Analogue AUTOMATIC STREET
ED-533 LIGHTING ON / OFF CONTROLLING TIMER UNITS as per departmental EACH 700.00
specification
SUPPLY OF 63 AMP / 3Phase Analogue single dial AUTOMATIC STREET
ED-534 LIGHTING ON / OFF CONTROLLING TIMER UNITS as per departmental EACH 14600.00
specification
FIXING OF ABOVE 63 AMP / 3Phase Analogue AUTOMATIC STREET
ED-535 LIGHTING ON / OFF CONTROLLING TIMER UNITS as per departmental EACH 850.00
specification
SUPPLY OF 40 AMP / 1Phase Microprocessor based digital AUTOMATIC
ED-536 STREET LIGHTING ON / OFF CONTROLLING TIMER UNITS as per EACH 4900.00
departmental specification
FIXING OF ABOVE 40 AMP / 1Phase Microprocessors based digital
ED-537 AUTOMATIC STREET LIGHTING ON / OFF CONTROLLING TIMER UNITS EACH 700.00
as per departmental specification
SUPPLY OF 63 AMP / 3Phase Microprocessor based digital AUTOMATIC
ED-538 STREET LIGHTING ON / OFF CONTROLLING TIMER UNITS as per EACH 12500.00
departmental specification
FIXING OF ABOVE 63 AMP / 3Phase Microprocessor based digital
ED-539 AUTOMATIC STREET LIGHTING ON / OFF CONTROLLING TIMER UNITS EACH 850.00
as per departmental specification
LED FITTINGS
Supply fixing and maintenance of LED fitting of 40 W to 50 W with 7 years
ED-540 EACH 7256.00
replacement guarantee (in place of 70 W SVL).
Supply fixing and maintenance of LED fitting of 90 W to 120 W with 7 years
ED-541 EACH 12979.00
replacement guarantee (in place of 150 W SVL).
ED-542 Cost of Labour for fixing of street light fitting EACH 249.26
Supply of LED flood light fitting of 70 W to 100 W with 7 years replacement
ED-543 EACH 11580.00
guarantee (in place of 150 W MH FL).
Supply of LED flood light fitting of 120 W to 130 W with 7 years replacement
ED-544 EACH 19000.00
guarantee (in place of 250 W MH FL).
Supply of LED flood light fitting of 160 W to 200 W with 7 years replacement
ED-545 EACH 21450.00
guarantee (in place of 400 W MH FL).
Supply of LED flood light fitting of 210 W to 230 W with 7 years replacement
ED-546 EACH 28400.00
guarantee
Supply of LED flood light fitting of 240 W to 300 W with 7 years replacement
ED-547 EACH 34000.00
guarantee
Cost of material for conversion of exisitng 6 nos of 1 x 400w SV/MH with 10
ED-548 nos of 70 to 100w LED FL fittingwith 7 years replacement guarantee in 12m EACH 115800.00
High Mast
Cost of labour for conversion of exisitng 6 nos of 1 x 400w SV/MH with 10 nos
ED-549 EACH 3988.00
of 70 to 100w LED FL fitting in 12m High Mast
Cost of material for Conversion of existing 8 nos of 2 x 400w SV/MH FL with 6
ED-550 nos of 160 to 200w LED FL fitting with 7 years replacement guarantee in 16m EACH 128700.00
High mast
Cost of labour for Conversion of existing 8 nos of 2 x 400w SV/MH FL with 6
ED-551 EACH 3490.00
nos of 160 to 200w LED FL fitting in 16m High mast
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Cost of material for Conversion of existing 12 nos of 2 x 400w SV/MH FL with
ED-552 7 nos of 210 to 230w LED FL fitting with 7 years replacement guarantee in EACH 198800.00
20m High mast
Cost of labour for Conversion of existing 12 nos of 2 x 400w SV/MH FL with 7
ED-553 EACH 4736.00
nos of 210 to 230w LED FL fitting in 20m High mast
Cost of material for Conversion of existing 16 nos of 2 x 400w SV/MH FL with
ED-554 15 nos of 240 to 300w LED FL fitting with 7 years replacement guarantee in EACH 510000.00
30m High mast
Cost of labour for Conversion of existing 16 nos of 2 x 400w SV/MH FL with 15
ED-555 EACH 7727.00
nos of 240 to 300w LED FL fitting in 30m High mast
Supply of LED pathway fitting of 10 W to 20 W with 7 years replacement
ED-556 EACH 3278.00
guarantee (for parks and play grounds).
ED-557 Cost of supply of 15w LED Post Top Lantern fitting EACH 1330.00
ED-558 Cost of supply of 9w LED bulb pin type EACH 65.00
ED-559 Cost of supply of 5w LED bulb pin type EACH 60.00
Supply of LED street light fitting of 150W-165W with 7 years replacement
Warranty in place of 250W SVL with inbuilt Multi-Step Dimmable driver and
ED-560 EACH 23575.00
other necessary components suitable for automated group street light
monitoring system
Supply of LED street light fitting of 150W-165W with 7 years replacement
Warranty in place of 250W SVL with inbuilt Multi-Step Dimmable driver and
ED-561 EACH 36400.00
other necessary components suitable for individual light point control and
monitoring system
Supply of LED flood light fitting of 30 W to 60 W (Green colour light) with 7
ED-562 EACH 4250.00
years replacement guarantee (in place of 70 W green colour FL).
ED-563 Supply of LED flood light fitting of 70 W to 100 W (Green colour light) with 7 EACH 4700.00
GENERATORS
ED-564 Supply of 62.5 KVA Three phase DG set, 415 V, with AMF control panel NOS 628200.00
ED-565 Supply of 82.5 KVA Three phase DG set, 415 V, with AMF control panel NOS 721900.00
ED-566 Supply of 100 KVA Three phase DG set, 415 V, with AMF control panel NOS 896500.00
ED-567 Supply of 125 KVA Three phase DG set, 415 V, with AMF control panel NOS 998600.00
ED-568 Supply of 160 KVA Three phase DG set, 415 V, with AMF control panel NOS 1281700.00
ED-569 Supply of 200 KVA Three phase DG set, 415 V, with AMF control panel NOS 1518600.00
ED-570 Supply of 250 KVA Three phase DG set, 415 V, with AMF control panel NOS 1683800.00
ED-571 5 KVA Generator with standard panel EACH 192500.00
ED-572 7.5 KVA Generator with standard panel EACH 200900.00
ED-573 10 KVA Generator with standard panel EACH 227200.00
ED-574 15 KVA Generator with standard panel EACH 244100.00
ED-575 20 KVA Generator with standard panel EACH 256700.00
ED-576 30 KVA Generator with standard panel EACH 312400.00
ED-577 35 KVA Generator with standard panel EACH 333600.00
ED-578 40 KVA Generator with standard panel EACH 389300.00
ED-579 45 KVA Generator with standard panel EACH 454600.00
ED-580 62.5 KVA Generator with standard panel EACH 522900.00
ED-581 82.5 KVA Generator with standard panel EACH 616700.00
ED-582 100 KVA Generator with standard panel EACH 686000.00
ED-583 125 KVA Generator with standard panel EACH 788200.00
ED-584 160 KVA Generator with standard panel EACH 1071000.00
ED-585 200 KVA Generator with standard panel EACH 1308000.00
ED-586 250 KVA Generator with standard panel EACH 1473000.00
SUPPLY, ERECTION OF LAMP POSTS
SUPPLY OF ONE NO OF 0.3 MTR ( 1 FOOT ) HOT DIP GALVANIZED LAMP
ED-587 NOS 264.00
POLE FOR GATE / COMPOUND WALL MOUNTING
ERECTION OF ONE NO OF 0.3 MTR ( 1 FOOT ) HOT DIP GALVANIZED
ED-588 NOS 216.00
LAMP POLE
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 1 MTR HOT DIP GALVANIZED LAMP POLE FOR
ED-589 NOS 560.00
GATE / COMPOUND WALL MOUNTING
ED-590 ERECTION OF ONE NO OF 1 MTR HOT DIP GALVANIZED LAMP POLE NOS 216.00
SUPPLY OF ONE NO OF 2 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-591 POST (FOR POST TOP LANTERN FITTING, 2 CORE SMC FUSE BOX WITH NOS 3316.00
Hot dip zinc galvanising)
Cost of Erection & materials required for 2 mtr Garden lamp pole ( Post
ED-592 of Lantern Type) ( WITH Hot dip zinc galvanising of anchor bolts & NOS NA
Flats) (NORMAL SOIL)
Cost of Erection & materials required for 2 mtr Garden lamp pole ( Post
ED-593 of Lantern Type) ( WITH Hot dip zinc galvanising of anchor bolts & NOS 5766.00
Flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 2 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-594 POST, WITH 1 Mtr CURVED SINGLE BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 4355.00
Hot dip zinc galvanising
Cost of Erection & materials required for 2 mtr Garden lamp pole WITH 1
ED-595 Mtr CURVED SINGLE BRACKET,( WITH Hot dip zinc galvanising of NOS 5806.00
anchor bolts & Flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 2 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-596 POST, WITH 1 Mtr CURVED DOUBLE BRACKET,, 2 CORE SMC FUSE BOX NOS 5196.00
WITH Hot dip zinc galvanising(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 2 mtr Garden lamp pole WITH 1
ED-597 Mtr CURVED DOUBLE BRACKET,( WITH Hot dip zinc galvanising of NOS 5906.00
anchor bolts & Flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 2 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-598 POST, WITH 1 Mtr CURVED TRIPLE BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 6033.00
Hot dip zinc galvanising
Cost of Erection & materials required for 2 mtr Garden lamp pole WITH 1
ED-599 Mtr CURVED TRIPLE BRACKET,WITH Hot dip zinc galvanising Anchor NOS 6006.00
bolt & flats (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 2 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-600 POST, WITH 1 Mtr CURVED 4 WAY BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 6871.00
Hot dip zinc galvanising(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 2 mtr Garden lamp pole WITH 1
ED-601 Mtr CURVED 4 WAY BRACKET, WITH Hot dip zinc galvanising Anchor NOS 6186.00
bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 6 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-602 POST WITH ONE MTR SINGLE STRAIGHT BRACKET, 1NO. OF 2 CORE SMC NOS 10633.00
FUSE BOX WITH Hot dip zinc galvanising
Cost of Erection & materials required for 6 mtr Street lamp pole with 1
MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-603 NOS 8724.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 6 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-604 POST WITH 2.7 Mtr SINGLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 12175.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
ED-605 MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 8735.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 6 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-606 POST WITH 2.7 Mtr DOUBLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 13962.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
ED-607 MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 8735.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 6 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-608 POST WITH 2.7 Mtr TRIPLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 15750.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
ED-609 MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 8735.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-610 SINGLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24207.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-611 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-612 DOUBLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 25718.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long DOUBLE STRAIGHT BRACKET WITH Hot dip zinc
ED-613 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-614 TRIPLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 27227.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long TRIPLE STRAIGHT BRACKET WITH Hot dip zinc
ED-615 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-616 SINGLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24523.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with
ED-617 2.7 MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 13017.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-618 DOUBLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 26310.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with
2.7 MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc
ED-619 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 8 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-620 TRIPLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 28098.00
galvanising
Cost of Erection & materials required for 8 mtr Street lamp pole with
ED-621 2.7 MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 13017.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-622 SINGLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 25159.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
2MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-623 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-624 DOUBLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 26670.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
2MTR long DOUBLE STRAIGHT BRACKET WITH Hot dip zinc
ED-625 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-626 TRIPLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 28179.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
2MTR long TRIPLE STRAIGHT BRACKET WITH Hot dip zinc
ED-627 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-628 SINGLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 25475.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
ED-629 2.7MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 13017.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-630 DOUBLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 27262.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
2.7MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc
ED-631 NOS 13017.00
galvanising Anchor bolt & flats) (NORMAL SOIL)(Material ratio -
1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 9 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-632 TRIPLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 29050.00
galvanising
Cost of Erection & materials required for 9 mtr Street lamp pole with
ED-633 2.7MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising NOS 13017.00
Anchor bolt & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 6 mtr Street lamp pole with 1
MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-634 NOS 14614.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-635 NOS 14625.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-636 NOS 14625.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 6 mtr Street lamp pole with 2.7
MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-637 NOS 14625.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-638 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long DOUBLE STRAIGHT BRACKET WITH Hot dip zinc
ED-639 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2
MTR long TRIPLE STRAIGHT BRACKET WITH Hot dip zinc
ED-640 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2.7
MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-641 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2.7
MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-642 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 8 mtr Street lamp pole with 2.7
MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-643 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 9 mtr Street lamp pole with 2
MTR long SINGLE STRAIGHT BRACKET WITH Hot dip zinc
ED-644 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Cost of Erection & materials required for 9 mtr Street lamp pole with
2MTR long DOUBLE STRAIGHT BRACKET WITH Hot dip zinc
ED-645 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 9 mtr Street lamp pole with 2
MTR long TRIPLE STRAIGHT BRACKET WITH Hot dip zinc
ED-646 NOS 17592.00
galvanising 1600 mm Anchor bolt & 12 nos. of Flats (SAND
AREA)(Material ratio - 1:1.5:3)
Cost of Erection & materials required for 9mtr Street lamp pole with
2.7MTR long SINGLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-647 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 9mtr Street lamp pole with 2.7
MTR long DOUBLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-648 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
Cost of Erection & materials required for 9 mtr Street lamp pole with 2.7
MTR long TRIPLE ARCH BRACKET WITH Hot dip zinc galvanising
ED-649 NOS 17592.00
1600 mm Anchor bolt & 12 nos. of Flats (SAND AREA)(Material
ratio - 1:1.5:3)
ED-650 COST OF 8 MTR LONG G.I OCTAGONAL STREET LAMP POLE WITH NOS 25360.00
G,I SINGLE BRACKET(200/100)
Cost of Erection & materials required for 8 mtr OCTOGANAL Street lamp
pole with SINGLE BRACKET WITH Hot dip zinc galvanising 1600 mm
ED-651 NOS 17592.00
Anchor bolt & 12 nos. of Flats ( NORMAL SOIL )(Material ratio -
1:1.5:3)
ED-652 COST OF 8 MTR LONG G.I OCTAGONAL STREET LAMP POLE WITH NOS 26830.00
G,I DOUBLE BRACKET(200/100)
Cost of Erection & materials required for 8 mtr OCTOGANAL Street lamp
pole with DOUBLE BRACKET WITH Hot dip zinc galvanising 1600
ED-653 NOS 17592.00
mm Anchor bolt & 12 nos. of Flats (NORMAL SOIL)(Material ratio -
1:1.5:3)
ED-654 COST OF 6 MTR LONG G.I OCTAGONAL STREET LAMP POST WITH NOS 14630.00
1MTR SINGLE BRACKET
Cost of Erection & materials required for 6 mtr OCTOGANAL Street lamp
pole with SINGLE BRACKET WITH Hot dip zinc galvanising 800 mm
ED-655 NOS 9025.00
Anchor bolt & 8 nos. of Flats ( NORMAL SOIL )(Material ratio -
1:1.5:3)
COST OF 6 MTR LONG G.I OCTAGONAL STREET LAMP POST WITH
ED-656 NOS 15840.00
1MTR DOUBLE BRACKET
Cost of Erection & materials required for 6 mtr OCTOGANAL Street lamp
pole with DOUBLE BRACKET WITH Hot dip zinc galvanising 800 mm
ED-657 NOS 9025.00
Anchor bolt & 8 nos. of Flats ( NORMAL SOIL )(Material ratio -
1:1.5:3)
SUPPLY OF ONE NO OF 3 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-658 POST (FOR POST TOP LANTERN FITTING, 2 CORE SMC FUSE BOX WITH NOS 2967.00
Hot dip zinc galvanising)
Cost of Erection & materials required for 3 mtr Garden lamp pole ( Post
ED-659 NOS 2885.00
of Lantern Type) CONVENTIONAL FOUNDATION(Material ratio - 1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 3 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-660 POST, WITH 1 Mtr CURVED SINGLE BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 4006.00
Hot dip zinc galvanising
Cost of Erection & materials required for 3 mtr Garden lamp pole WITH 1
ED-661 Mtr CURVED SINGLE BRACKET CONVENTIONAL FOUNDATION(Material ratio - NOS 2985.00
1:1.5:3)
SUPPLY OF ONE NO OF 3 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-662 POST, WITH 1 Mtr CURVED DOUBLE BRACKET,, 2 CORE SMC FUSE BOX NOS 4847.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 3 mtr Garden lamp pole WITH 1
ED-663 Mtr CURVED DOUBLE BRACKET CONVENTIONAL FOUNDATION(Material ratio - NOS 2885.00
1:1.5:3)
SUPPLY OF ONE NO OF 3 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-664 POST, WITH 1 Mtr CURVED TRIPLE BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 5684.00
Hot dip zinc galvanising
Cost of Erection & materials required for 3 mtr Garden lamp pole WITH 1
ED-665 Mtr CURVED TRIPLE BRACKET CONVENTIONAL FOUNDATION(Material ratio - NOS 2885.00
1:1.5:3)
SUPPLY OF ONE NO OF 3 Mtr X 60.3 MM OD X 3.65mm THICK STREET LAMP
ED-666 POST, WITH 1 Mtr CURVED 4 WAY BRACKET,, 2 CORE SMC FUSE BOX WITH NOS 6522.00
Hot dip zinc galvanising
Cost of Erection & materials required for 3 mtr Garden lamp pole WITH 1
ED-667 Mtr CURVED 4 WAY BRACKET CONVENTIONAL FOUNDATION(Material ratio - NOS 2885.00
1:1.5:3)
SUPPLY OF ONE NO OF 7 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-668 POST WITH ONE MTR SINGLE STRAIGHT BRACKET, 1NO. OF 2 CORE SMC NOS 10305.00
FUSE BOX WITH Hot dip zinc galvanising
Cost of Erection & materials required for 7 mtr Street lamp pole with 1
ED-669 MTR long SINGLE STRAIGHT BRACKET CONVENTIONAL NOS 4245.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 7 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-670 POST WITH 2.7 Mtr SINGLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 11847.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 7 mtr Street lamp pole with 2.7
ED-671 MTR long SINGLE ARCH BRACKET CONVENTIONAL NOS 4245.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 7 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-672 POST WITH 2.7 Mtr DOUBLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 13634.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 7mtr Street lamp pole with 2.7
ED-673 MTR long DOUBLE ARCH BRACKET CONVENTIONAL NOS 4245.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 7 MT X 88.9 MM OD X 4.05 MM THICK STREET LAMP
ED-674 POST WITH 2.7 Mtr TRIPLE ARCH BRACKET, 1NO. OF 4 CORE SMC FUSE BOX NOS 15422.00
WITH Hot dip zinc galvanising
Cost of Erection & materials required for 7 mtr Street lamp pole with 2.7
ED-675 MTR long TRIPLE ARCH BRACKET CONVENTIONAL NOS 4245.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-676 SINGLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 22823.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-677 2 MTR long SINGLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-678 DOUBLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24334.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-679 2 MTR long DOUBLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.0 MTR Straight
ED-680 TRIPLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 25843.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-681 2 MTR long TRIPLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-682 SINGLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 23139.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-683 2.7 MTR long SINGLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-684 DOUBLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24926.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-685 2.7 MTR long DOUBLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 9.5 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-686 TRIPLE BRACKET, 1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 26714.00
galvanising
Cost of Erection & materials required for 9.5 mtr Street lamp pole with
ED-687 2.7 MTR long TRIPLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 11 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-688 SINGLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24403.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-689 2MTR long SINGLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 11 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-690 DOUBLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 25914.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-691 2MTR long DOUBLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF11 MTR. STREET LAMP POST WITH 2 MTR Straight
ED-692 TRIPLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 27423.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-693 2MTR long TRIPLE STRAIGHT BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 11 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-694 SINGLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 24719.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-695 2.7MTR long SINGLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
SUPPLY OF ONE NO OF 11 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-696 DOUBLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 26506.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-697 2.7MTR long DOUBLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
SUPPLY OF ONE NO OF 11 MTR. STREET LAMP POST WITH 2.7 MTR ARCH
ED-698 TRIPLE BRACKET,1 NO. OF 4 CORE SMC FUSE BOX WITH Hot dip zinc NOS 28294.00
galvanising
Cost of Erection & materials required for 11 mtr Street lamp pole with
ED-699 2.7MTR long TRIPLE ARCH BRACKET CONVENTIONAL NOS 6500.00
FOUNDATION(Material ratio - 1:1.5:3)
HIGH MAST
Cost of supply of 8m GI Octogonal Mini mast with hot galvanised hexagonal
ED-700 EACH 31577.00
lantern carriage
Cost of Erection & materials required for 8 mtr OCTOGANAL Street lamp pole
ED-701 with SINGLE BRACKET WITH Hot dip zinc galvanising 1600 mm Anchor bolt EACH 17592.00
& 12 nos. of Flats ( NORMAL SOIL )(Material ratio - 1:1.5:3)
Cost of supply of LED flood light fitting for 8m Mini High mast with 3 nos of 70-
ED-702 EACH 34740.00
100w LED flood light
ED-703 supply of 12 mtr HIGH MAST as per specification EACH 228300.00
Installation, aiming, testing and commissioning of 12 mtr HIGH MAST as per
ED-704
specification
EACH 170200.00
Cost of supply of LED flood light fitting for 12m High mast with 10 nos of 70-
ED-705
100w LED flood light
EACH 115800.00
ED-706 supply of 16 mtr HIGH MAST as per specification EACH 275600.00
Installation, aiming, testing and commissioning of 16 mtr HIGH MAST as per
ED-707
specification
EACH 204300.00
Cost of supply of LED flood light fitting for 16m High mast with 6 nos of 160-
ED-708
200w LED flood light
EACH 128700.00
ED-709 supply of 20 mtr HIGH MAST as per specification EACH 320100.00
Iinstallation, aiming, testing and commissioning of 20 mtr HIGH MAST as per
ED-710
specification
EACH 235400.00
Cost of supply of LED flood light fitting for 20m High mast with 7 nos of 210-
ED-711 230w LED flood light EACH 198800.00
ED-712 supply of 30 mtr HIGH MAST as per specification EACH 465500.00
Installation, aiming, testing and commissioning of 30 mtr HIGH MAST as per
ED-713
specification
EACH 392593.00
Cost of supply of LED flood light fitting for 30m High mast with 15nos of 240-
ED-714 300w LED flood light EACH 510000.00
ED-715 supply of 40 mtr HIGH MAST as per specification EACH 755900.00
Installation, aiming, testing and commissioning of 40 mtr HIGH MAST as per
ED-716
specification
EACH 511657.00
Cost of supply of LED flood light fitting for 40m High mast with 16 nos of 320-
ED-717 360w LED flood light EACH 768000.00
PA SYSTEM, PROJECTOR
Conference type Public Address System, Projector and motorized screen
ED-718 EACH 14946.00
-Chairman unit
ED-719 Delegate unit EACH 13250.00
ED-720 Conference controller SET 33145.00
ED-721 PA mixer Amplifier-120W SET 19957.00
ED-722 PA mixer Amplifier-240W SET 25607.00
ED-723 PA Booster Amplifier-480W SET 44220.00
ED-724 Wall Speaker-15W EACH 8594.00
ED-725 Wall Speaker-30W EACH 12493.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ED-726 Ceiling Speaker-15W EACH 2175.00
ED-727 Ceiling Speaker-20W EACH 3361.00
ED-728 Cordless mic UHF EACH 20000.00
ED-729 8 PIN Conference Socket with modular box and front plate EACH 327.70
ED-730 2 core 1.5 sqmm Shielded copper speaker wire RM 40.50
ED-731 8 core 1.5 sqmm Shielded PVC copper conference cable RM 155.50
3200 Ansi Lumens projector, XGA(1024 X 768) resolution, contrast
ED-732 EACH 38800.00
ratio:4000:1
3600 Ansi Lumens projector, XGA(1024 X 768) resolution, contrast
ED-733 EACH 55190.00
ratio:20000:1
3300 Ansi Lumens Short throw projector, WXGA(1280 X 800) resolution,
ED-734 EACH 97250.00
contrast ratio:3000:1
ED-735 6' X 4' Motorized screen EACH 11970.00
ED-736 8' X 6' Motorized screen EACH 16060.00
ED-737 10' X 8' Motorized screen EACH 19290.00
ED-738 3 feet ceiling mount kit EACH 4252.00
ED-739 20 Metre HDMI cable SET 4210.00
ED-740 3 core 1.5 Sqmm PVC Power cable for projector RM 57.30
ED-741 2 Pair Unarmoured 0.5mm Telephone cable RM 9.05
ED-742 4 Pair Unarmoured 0.5mm Telephone cable RM 16.15
ED-743 10 Pair Unarmoured 0.5mm Telephone cable RM 38.30
ED-744 20 Pair Unarmoured 0.5mm Telephone cable RM 70.70
ED-745 50 Pair Unarmoured 0.5mm Telephone cable RM 159.50
ED-746 10 Pair Armoured 0.5mm Jelly filled Telephone cable RM 148.40
ED-747 20 Pair Armoured 0.5mm Jelly filled Telephone cable RM 218.10
ED-748 50 Pair Armoured 0.5mm Jelly filled Telephone cable RM 424.00
ED-749 100 Pair Armoured 0.5mm Jelly filled Telephone cable RM 735.20
ED-750 200 Pair Armoured 0.5mm Jelly filled Telephone cable RM 1369.00
ED-751 Unarmoured Co-Axial Cable for TV RG-06 RM 23.20
ED-752 Unarmoured Co-Axial Cable for TV RG-11 RM 52.50
ED-753 Armoured Co-Axial Cable for TV RG-06 RM 88.80
ED-754 Armoured Co-Axial Cable for TV RG-11 RM 126.20
ED-755 Unarmoured LAN & CCTV Cable - CAT -6 RM 29.20
ED-756 Armoured LAN & CCTV Cable - CAT -6 RM 104.00
ED-757 Unarmoured Speaker Cable - 2 Core - 1.0 sq.mm RM 28.20
ED-758 Unarmoured Speaker Cable - 2 Core - 1.5 sq.mm RM 40.40
ED-759 Armoured Speaker Cable - 2 Core - 1.5 sq.mm RM 83.80
ED-760 Armoured Speaker Cable - 2 Core - 2.5 sq.mm RM 104.00
ED-761 OFC Cable - 6 Core Indoor RM 53.50
ED-762 OFC Cable - 6 Core Outdoor RM 58.50
ED-763 OFC Cable - 12 Core Indoor RM 68.60
ED-764 PoE Switches for CCTV IP Camera - 4 Port EACH 6098.00
ED-765 PoE Switches for CCTV IP Camera - 8 Port EACH 8430.00
ED-766 PoE Switches for CCTV IP Camera - 24 Port EACH 19080.00
ED-767 Network Video Recorder for CCTV - 4 Channel -1 SATA EACH 5514.00
Network Video Recorder for CCTV - 8 Channel -1 SATA( 1 No.Hard
ED-768 EACH
Disk) 6363.00
Network Video Recorder for CCTV - 16 Channel -2 SATA( 2 Nos.Hard
ED-769 EACH
Disk) 11660.00
Network Video Recorder for CCTV - 32 Channel -2 SATA( 2 Nos.Hard
ED-770 EACH
Disk) 21200.00
ED-771 LAN Network Switches Un-Managed 10/100/1000 - 8 Port EACH 1962.00
ED-772 LAN Network Switches Un-Managed 10/100/1000 - 16 Port EACH 5143.00
ED-773 LAN Network Switches Un-Managed 10/100/1000 - 24 Port EACH 6310.00
ED-774 LAN Network Switches Semi-Managed 10/100/1000 - 24 Port EACH 11870.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 1G
ED-775 EACH
Uplink - 8 Port 16960.00
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 1G
ED-776 EACH
Uplink - 24 Port 34990.00
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 1G
ED-777 EACH
Uplink - 24 Port with Fibre Port 62560.00
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 1G
ED-778 EACH
Uplink - 48 Port 42400.00
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 10G
ED-779 EACH
Uplink - 24 Port 38170.00
LAN Network Switches Fully Managed 10/100/1000 Layer -2 with 10G
ED-780 EACH
Uplink - 28 Port 49040.00
LAN Network Switches Fully Managed 10/100/1000 Layer -3 with 1G
ED-781 EACH
Uplink - 24 Port 111350.00
LAN Network Switches Fully Managed 10/100/1000 Layer -3 with 1G
ED-782 EACH
Uplink - 24 Port with Fibre Port 127200.00
LAN Network Switches Fully Managed 10/100/1000 Layer -3 with 1G
ED-783 EACH
Uplink - 48 Port 206700.00
ED-784 Media Converter for Optical Fibre Cable -Single Mode EACH 5302.00
ED-785 Media Converter for Optical Fibre Cable -Multi Mode EACH 4772.00
ED-786 I/O Socket - RJ -45 EACH 159.50
ED-787 I/O Socket - RJ -11 EACH 63.60
ED-788 CAT 6 PVC Module Box EACH 63.60
ED-789 Face Plate Single Socket RJ-45 EACH 95.90
ED-790 Face Plate Dual Socket RJ-45 EACH 106.00
ED-791 Face Plate Quad Socket RJ-45 EACH 117.00
ED-792 Hard Disc for NVR- 2TB EACH 5832.00
ED-793 Hard Disc for NVR- 4TB EACH 12355.00
ED-794 Hard Disc for NVR- 6TB EACH 16755.00
ED-795 Hard Disc for NVR- 8TB EACH 24390.00
ED-796 Rack with Accessories - 2U Rack EACH 1908.00
ED-797 Rack with Accessories - 4U Rack EACH 2650.00
ED-798 Rack with Accessories - 6U Rack EACH 3180.00
ED-799 Rack with Accessories - 9U Rack EACH 4240.00
ED-800 Rack with Accessories - 12U Rack EACH 6360.00
ED-801 Rack with Accessories - 36U Rack EACH 21200.00
ED-802 Rack with Accessories - 42U Rack EACH 37100.00
ED-803 Fan extra for the above rack with Accessories EACH 530.00
ED-804 Patch Cord - 1 Metre Length EACH 138.00
ED-805 Patch Cord - 2 Metre Length EACH 185.00
ED-806 Patch Cord - 3 Metre Length EACH 223.00
ED-807 24 Port Patch Panel- Unloaded EACH 2120.00
ED-808 24 Port Patch Panel- Fully loaded EACH 3977.00
HIRING CHARGES FOR TEMPORARY
ARRANGEMENTS
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 1
ED-809 EACH
Day 265.00
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 2
ED-810 EACH
Days 334.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 3
ED-811 EACH
Days 386.00
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 4
ED-812 EACH
Days 435.00
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 5
ED-813 EACH
Days 487.00
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 6
ED-814 EACH
Days 530.00
Hire Charges for Temporary Arrangements Metal Hallide Lamps - 7
ED-815 EACH
Days 583.00
Hire Charges for Temporary Arrangements Generator 62.5 KVA
ED-816 EACH
(Starting & End Day) 1696.00
Hire Charges for Temporary Arrangements Generator 125 KVA
ED-817 EACH
(Starting & End Day) 3499.00
Hire Charges for Temporary Arrangements Generator 250 KVA
ED-818 EACH
(Starting & End Day) 6999.00
Hire Charges for Temporary Arrangements Generator 320 KVA
ED-819 EACH
(Starting & End Day) 8377.00
Hire Charges for Temporary Arrangements Generator 500 KVA
ED-820 EACH
(Starting & End Day) 12726.00
Hire Charges for Temporary Arrangements Generator 62.5 KVA
ED-821 EACH
(Intermediate Days) 1357.00
Hire Charges for Temporary Arrangements Generator 125 KVA
ED-822 EACH
(Intermediate Days) 2799.00
Hire Charges for Temporary Arrangements Generator 250
ED-823 EACH
KVA(Intermediate Days) 5599.00
Hire Charges for Temporary Arrangements Generator 320 KVA
ED-824 EACH
(Intermediate Days) 6702.00
Hire Charges for Temporary Arrangements Generator 500 KVA
ED-825 EACH
(Intermediate Days) 10180.00
ED-826 Hire Charges for Temporary Arrangements Cable 2 of 7/20 sq.mm RM 2.02
ED-827 Hire Charges for Temporary Arrangements Cable 4 of 7/20 sq.mm RM 4.04
ED-828 Hire Charges for Temporary Arrangements Cable 4 of 19/16 sq.mm RM 11.10
ED-829 Hire Charges for Temporary Arrangements Cable 4 of 7/16 sq.mm RM 6.05
ED-830 Hire Charges for Temporary Arrangements Cable 4 of 120 sq.mm RM 53.50
Hire Charges for Temporary Arrangements Cable 3.5 X 180 sq.mm
ED-831 RM
LTUG 21.20
ED-832 Hire Charges for Temporary Arrangements Cable 4 of 185 sq.mm RM 74.70
ED-833 Hire Charges for Temporary Arrangements Cable 3 core Flexible wire RM 3.03
ED-834 Hire Charges for Temporary Arrangements Cable 4 core Flexible wire RM 3.03
Hire Charges for Temporary Arrangements Cable 4 core 6 sq.mm
ED-835 RM
Copper Cable 6.05
Hire Charges for Temporary Arrangements Cable 4 X 10 sq.mm
ED-836 RM
Flexible Cable 6.05
ED-837 Hire Charges for Temporary Arrangements Cable 2 of 3/20 sq.mm RM 2.02
Hire Charges for Temporary Arrangements Cable 3 1/2 X 50 sq.mm
ED-838 RM
LTUG 11.10
ED-839 Hire Charges for Temporary Arrangements Cable Co-Axial Cable RM 1.01
ED-840 Hire Charges for Temporary Arrangements Serial Set 2 Days RM 17.15
ED-841 Hire Charges for Temporary Arrangements Serial Set 3 Days RM 25.25
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
ED-842 Hire Charges for Temporary Arrangements Fly Catcher 2 Days EACH 169.60
ED-843 Hire Charges for Temporary Arrangements LED Nose Light EACH 18.15
ED-844 Hire Charges for Temporary Arrangements Earth Pipe RM 32.30
ED-845 Hire Charges for Temporary Arrangements 100 A Change Over Switch EACH 159.50
ED-846 Hire Charges for Temporary Arrangements 250 A Change Over Switch EACH 169.60
ED-847 Hire Charges for Temporary Arrangements 400 A Change Over Switch EACH 212.00
ED-848 Hire Charges for Temporary Arrangements 250 A Change Over Switch with Panel Board
EACH 795.00
Hire Charges for Temporary Arrangements 100 A Panel Board with 100
ED-849 EACH
A TPN Switch & 5 Nos 30 A TPN switch with Bus Bar 822.00
Hire Charges for Temporary Arrangements 250 A Panel Board with 250
ED-850 EACH
A TPN Switch & 7 Nos 63 A DPMCB switch 1060.00
Hire Charges for Temporary Arrangements 100 a Panel Board incoming
ED-851 100 A TPN switch with various range of TP/DP/SP MCB with suitable EACH
angle iron frame work 784.00
ED-852 Hire Charges for Temporary Arrangements 200A Panel Board EACH 848.00
ED-853 Hire Charges for Temporary Arrangements 400 A Panel Board EACH 1590.00
Hire Charges for Temporary Arrangements 4'40W Patty Tube Light
ED-854 EACH
with Fitting 25.20
ED-855 Hire Charges for Temporary Arrangements 15/5A Plug Board EACH 25.20
ED-856 Hire Charges for Temporary Arrangements Blank Post EACH 1962.00
Hire Charges for Temporary Arrangements 6 Mtr GI Post for Metal
ED-857 EACH
Halide Fitting 95.90
ED-858 Hire Charges for Temporary Arrangements 1.5 TR Split AC EACH 5302.00
ED-859 Hire Charges for Temporary Arrangements 2 TR Split AC EACH 7105.00
ED-860 Hire Charges for Temporary Arrangements 5 TR Split AC EACH 25025.00
ED-861 Hire Charges for Temporary Arrangements 7.5 TR Ductable AC EACH 36585.00
ED-862 Hire Charges for Temporary Arrangements 5 TR Slim PACK EACH 24815.00
ED-863 Hire Charges for Temporary Arrangements Air Curtain EACH 530.00
Hire Charges for Temporary Arrangements Republic Day High Power
ED-864 EACH
Audio System 47720.00
ED-865 Hire Charges for Temporary Arrangements Republic Day PA System EACH 7423.00
Hire Charges for Temporary Arrangements Republic Day Amplifier,
ED-866 EACH
Mic, XLR 5302.00
ED-867 Hire Charges for Temporary Arrangements 2 X 15 HF 3 way speaker EACH 1696.00
ED-868 Hire Charges for Temporary Arrangements 1 X 15 HF speaker EACH 1060.00
ED-869 Hire Charges for Temporary Arrangements 4 X 12 Loud speaker EACH 636.00
Hire Charges for Temporary Arrangements Car Calling System
ED-870 EACH
Arrangement 3181.00
ED-871 Hire Charges for Temporary Arrangements Cordless Mic EACH 530.00
ED-872 Hire Charges for Temporary Arrangements Wired Mic EACH 530.00
ED-873 EACH
Hire Charges for Temporary Arrangements 32 Channel Mixer Amplifier 636.00
ED-874 Hire Charges for Temporary Arrangements Lap top to Play CD Songs EACH 2120.00
ED-875 EACH
Hire Charges for Temporary Arrangements 5 KVA with 1 Hour back-up 7953.00
ED-876 Hire Charges for Temporary Arrangements Power Amplifier EACH 212.00
ED-877 Hire Charges for Temporary Arrangements Sony Video Camera EACH 5302.00
ED-878 Hire Charges for Temporary Arrangements 42" Plasma Screen EACH 2651.00
Hire Charges for Temporary Arrangements Mixer Board , Computer,
ED-879 EACH
UPS, etc 8480.00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL
BASIC RATE
SCH. NO. DESCRIPTION OF MATERIAL AND WORK UNIT 2020-21
(Rs)
Hire Charges for Temporary Arrangements 200 W LED Flood Light
ED-880 EACH
Fitting 212.00
ED-881 Hire Charges for Temporary Arrangements 5TR Slim Package AC EACH 26830.00
ED-882 Hire and running charges of Crane 20 Tonne capacity Day 7000.00
ED-883 Hire and running charges of Crane 40 Tonne capacity Day 8000.00
ED-884 Hire and running charges of Crane 80 Tonne capacity Day 15000. 00
Prepared by Checked by Technically sanctioned
AE ADE/I C ADE/P DEE/S DEE/N DEE/C DEE/HQ SE/ELECTRICAL