Started on Friday, 17 March 2023, 5:40 PM
State Finished
Completed on Friday, 17 March 2023, 5:43 PM
Time taken 2 mins 57 secs
Marks 20.00/20.00
Grade 100.00 out of 100.00
Question 1
Correct
Mark 1.00 out of 1.00
Characteristic impedance is also known as the surge impedance.
Question 2
Correct
Mark 1.00 out of 1.00
In most cases, aluminum conductors are used for distribution wires in order to reduce the amount of weight carried in the conductors.
Question 3
Correct
Mark 1.00 out of 1.00
True or False: The most important characteristic of a transmission line is its characteristic impedance.
Answer: True
Question 4
Correct
Mark 1.00 out of 1.00
Which of the following defective parts could lead to a shock?
Select one:
a. All of these answers are correct
b. outlets
c. switches
d. light fixtures
Question 5
Correct
Mark 1.00 out of 1.00
What color is not used for hot wires?
Select one:
a. red
b. blue
c. white
d. black
Question 6
Correct
Mark 1.00 out of 1.00
The ratio of the load resistance to the line impedance is called the standing wave ratio.
Question 7
Correct
Mark 1.00 out of 1.00
A type of short that occurs between one of the hot wires and ground is called
Select one:
a. ground leg
b. ground fault
c. chassis fault
d. ground loop
Question 8
Correct
Mark 1.00 out of 1.00
A turbine is a machine that converts the motion of a fluid such as water or steam into rotational movement.
Question 9
Correct
Mark 1.00 out of 1.00
True or False: Cables can carry analog but not digital signals.
Answer: false
Question 10
Correct
Mark 1.00 out of 1.00
True or False: An energy source is used to generate electric power which is then distributed to end users.
Answer: True
Question 11
Correct
Mark 1.00 out of 1.00
To calculate the number of kilowatt hours consumed by a device
Select one:
a. subtract the power consumed by the device from the device in watts and to the number of hours used and then divide the result by
1000
b. divide the power consumed by the device in watts by the number of hours the device is used and then divide the result by 1000
c. multiply the power consumed by the device in watts times the number of hours the device is used and then divide the result by
1000
d. add the power consumed by the device in watts to the number of hours the device is used and then divide the result by 1000
Question 12
Correct
Mark 1.00 out of 1.00
True or False: Coaxial cable is named for the fact that the two conductors in the cable share a common central axis.
Answer: True
Question 13
Correct
Mark 1.00 out of 1.00
Which category number of twisted pair is the most popular and widely used?
Select one:
a. 5
b. 7
c. 3
d. 1
Question 14
Correct
Mark 1.00 out of 1.00
The wiring in virtually all homes, businesses and industrial electrical systems is insulated solid copper wire.
Question 15
Correct
Mark 1.00 out of 1.00
The higher the frequency, the longer a cable looks to the transmitting and receiving circuits.
Question 16
Correct
Mark 1.00 out of 1.00
True or False: AC power line cords are not cables.
Answer: False
Question 17
Correct
Mark 1.00 out of 1.00
The two most popular types of transmission lines are coax and twisted pair.
Question 18
Correct
Mark 1.00 out of 1.00
For most modern homes, the service drop contains wiring that is capable of handling a current of up to
Select one:
a. 300 amperes
b. 100 amperes
c. 250 amperes
d. 200 amperes
Question 19
Correct
Mark 1.00 out of 1.00
A electromag wave is a radio signal that can propagate over long distances if the conditions are correct.
Question 20
Correct
Mark 1.00 out of 1.00
Most solar electric systems
Select one:
a. use inverters
b. produce AC
c. are complicated
d. are not affordable
