Scribd
Upload
100 views3 pages

ML-PB Power Board User Manual

The document provides user manuals for two power board models: ML-PB-LI and ML-PB-3LI. The ML-PB-LI facilitates a single D-cell lithium battery, while the ML-PB-3LI facilitates three D-cell lithium batteries connected in series. Both boards have output connectors and battery holders, with the ML-PB-3LI adding super-low loss diodes between each battery. The specifications section lists operating temperatures, dimensions, weights, and certifications for both models.

Uploaded by

Kaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100 views3 pages

ML-PB Power Board User Manual

The document provides user manuals for two power board models: ML-PB-LI and ML-PB-3LI. The ML-PB-LI facilitates a single D-cell lithium battery, while the ML-PB-3LI facilitates three D-cell lithium batteries connected in series. Both boards have output connectors and battery holders, with the ML-PB-3LI adding super-low loss diodes between each battery. The specifications section lists operating temperatures, dimensions, weights, and certifications for both models.

Uploaded by

Kaka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

USER MANUAL TYPE ML-PB-XX

7 ML-PB-LI

The ML-PB-LI Power Board is a board to facilitate the housing of 1 single D-cell Li battery ( Saft LSH-20)

1) Battery holder
2) Output connector ( to datalogger)

Specifications ML-PB-LI

Power Supply
None / Fuse inside
Protection battery
Input Power none
General Enviroment
Operating: -30 ~ + 85 °C; Storage -40 ~
Temperature +85 °C
Humidity 5 ~ 100 % RH
Electrical
Galvanic Isolation No
Yes, by means of fuse in
Overload Protection battery
CE Compliant Yes
Rohs Compliant Yes

Dimensions
WXDxH 106 mm X 33 mm X 40 mm
Weight
Netto Weight 110 Grams

Manufacturers of low power instruments page 32


USER MANUAL TYPE ML-PB-XX

8 ML-PB-3LI

The ML-PB-3LI Power Board is a board to facilitate the housing of 3 D-cell Li batteries ( Saft LSH-20)
Combined the board holds 39 Ah @ 3.6 Volts.

8.1 Triple Lithium battery holder


The board has 3 good quality battery holders to hold the LSH-20 cells. The circuit is very straightforward:
In series with each battery is a super low loss diode, which prevents the cells against revers current (
which could be an issue when cells of different state of depletion are installed, or even minor differences
in production)
There is NO fuse on the board, because the battery has an internal fuse already.

1) Super – low loss diode ( Smart diode)


2) Output connector ( to datalogger)
3) Battery holder

Manufacturers of low power instruments page 33


USER MANUAL TYPE ML-PB-XX

Specifications ML-PB-3LI

Power Supply
None / Fuse inside
Protection battery
Input Power none
General Enviroment
Operating: -30 ~ + 85 °C; Storage -40 ~ +85
Temperature °C
Humidity 5 ~ 100 % RH
Electrical
Galvanic Isolation No
Yes, by means of fuse in
Overload Protection battery
CE Compliant Yes
Rohs Compliant Yes

Dimensions
WXDxH 106 mm X 82 mm X 40mm
Weight
Netto Weight 110 Grams

Manufacturers of low power instruments page 34

You might also like