Kinco VFD Software V2.
5
I: Software function introduction
1. Support all series of Kinco VFD online debugging, that is, CV20, CV100, FV100 and
so on.
2. The internal parameters of Kinco VFD can be set in the form of English menu
option in the form of English menu option, and the operation is simple and
convenient.
3. The operating state of the inverter can be monitored online by computer, such as
the real-time monitoring of the output frequency, current, power, voltage and
other data.
4. It can be start, stop, speed control and other operations on the PC, and
dynamically display the state of the VFD with chart form, at a glance.
5. All the parameters of the inverter can be imported and exported in the form of
EXCEL. It is very convenient to download and read the parameters.
II: Software components
Chart-1 Chart-2
Put the files in chart-1 into the same directory and click [Link] as the
main program to run the upper computer software.
The main program ———— The main part of the software. Double clicking the
master program can run the host computer software.
Configuration list ———— Configurating parameter for various models that
main program supported
Attention ：
1) Do not change the names of these files casually
2) Although the user can view and modify the configuration table, it is
recommended not to modify it randomly, otherwise the program may not
run normally.
III：Software use method
1、Hardware connection
The personal computer and the VFD are connected by USB to 485 converter, as
shown in chart-3.
Personal Computer USB to 485 Converter
Kinco Inverter
Chart-3
2、Software interface
Chart-4
The software interface is like chart-4, and the meanings of each column are as
follows:
Setting：Chinese and English language settings, port settings
VFD : Read, downloaded and modified each parameter of VFD
Tools : It includes control panel and engineering entry. The control panel can
monitor the operation state of the converter dynamically. Engineering entry can be
imported, exported, read, downloaded VFD parameter and so on.
3、The method of software use
1）Setting Bar
① Software setting
Click Soft Mode , enter software setting interface.
langage：Chinese/English
Mode：Online mode /Offline mode
Online mode: The computer connects the inverter through communication.
Offline mode: The computer does not connect the frequency converter.
Chart-5
Chart-6
② Port setting
Click Comm Property , enter port setting interface .
The port properties are configured as follows:
Slave address：5
Choose port ：According to the actual to choose the COM port
Baud rate：9600
Data bit：8
Odd-even：None
Stop bit：1
The communication configuration interface is shown in the chrat-7.
Chart-7
③ Communication testing
Click Port Test ，Enter the port debug interface
If the sent data TX and received data RX is consistent, it means the
communication is successful, as shown in the following figure.
Chart-8
2）VFD bar
Click VFD to see the parameters setting of each group.
Example: Click the VFD-A group function code-A6 group, as shown in the chart-9
and chart 10.
Read: Read the parameter setting of VFD
Download: Downloading the parameters of the computer host computer software
to the inverter
Modified: Modifying the parameters of the upper computer software inverter
Chart-9
Chart-10
Chart-11
3) Tool bar
Chart-12
① Control panel
Click control panel and enter the control panel interface, as shown in the
chart-13.
The control panel can see direct current bus voltage, operating frequency and
running current in the form of chart.
The control panel can also realize the function of starting, stopping, reset and
frequency setting by the software of the upper computer.
Chart-13
② Project entrance (functional code copy)
Click Engneer —func copy and enter the functional copy interface, as shown
in the chart-14.
Import: Import all the parameters Excel files of the computer already configured
to the host computer software
Export: All the parameters of the inverter in the upper computer software are
exported to the computer by Excel file
Clear: Remove the parameters already set
Read: Read all the parameters in the inverter through communication to the
host computer software
Downloads: All the parameters set up by the upper computer are downloaded
through communication to the VFD
Exit: Exit function code copy interface
Chart-14
Example: import the converter parameters as needed.
1. Connect the computer to the VFD according to chart-3.
2. Export the VFD parameters Excel table.
3. Modify the Excel and set it in the user Settings bar, as shown in chart-15
below.
Chart-15
4、Import the modified excel form into the VFD and see chart-16 after the import.
Chart-16
