RAYMING PCB & ASSEMBLY

What is the Stiffener for FPC?

Introduction

Flexible printed circuits (FPCs) are widely used to interconnect

components in products like mobile phones, wearables, displays, medical

devices etc. where flexibility is required. FPCs use thin and flexible

polymer materials as the base substrate unlike rigid printed circuit boards

(PCBs). However, this flexibility also makes FPCs prone to bending and

twisting stresses during handling, assembly and use. Stiffeners can be

attached to FPCs to provide localized reinforcement and protect certain

areas from these stresses.

This article will provide a detailed overview of FPC stiffeners – their role,

materials used, design considerations, attachment methods and

applications.

What is a FPC Stiffener?

An FPC stiffener is a relatively thick, rigid structure that is fixed to the FPC

using adhesives at strategic locations. It helps prevent excessive flexing,

twisting or bending of the FPC in those areas during manufacturing,

assembly and usage. Stiffeners protect delicate components as well as the

FPC substrate itself from damage due to handling and mechanical

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

stresses. They also provide stiffness for connectors and interface points to

external devices.

FPC stiffeners are commonly made using materials like stainless steel,

FR4, polyimide and acrylics. Adhesives such as epoxies and acrylics are

used to bond the stiffener securely to the FPC. The stiffener often includes

holes and cutouts to allow mounting of ICs, connectors, buttons and other

components.

Request FPC Manufacturing Quote Now

Need for Stiffeners in FPCs

the flexible board

requires a stiffener to obtain external support

While the thin, flexible construction of FPCs is advantageous for many

applications, it also creates some unique challenges which FPC stiffeners

help overcome:

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 The thin polyimide substrate can get damaged by repeated flexing

and twisting stresses during assembly and usage. Stiffeners

reinforce areas prone to such stresses.

 Components on FPCs are also susceptible to failures and cracked

joints due to excessive vibration or shock loads without support.

Stiffeners protect fragile components.

 Flexible sections of FPCs by nature are prone to frequent handling

and manipulation during fabrication, component placement and

testing. Stiffeners prevent damage to copper traces and joints.

 Display driver ICs are sensitive to bending stresses due to the brittle

silicon. Stiffeners support these components on display driver FPCs.

 Connectors and interface points to other PCBs or cables undergo

mechanical stresses which can crack solder joints. Stiffeners

prevent flexing damage.

 Stiffness is required during handling, clamping and assembly of

FPCs using automatic equipment. Targeted stiffeners facilitate this.

 Stiffened areas can be grabbed or held firmly during manual

assembly and repair procedures without causing damage due to

bending.

 Components mounted on stiffened islands remain stable for

inspection and rework. Flexible FPCs can distort from flatness.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

 Stiffeners allow mounting of components on both sides of FPCs

without short circuits due to touch. Open areas can be kept flexible.

FPC Stiffener Materials

Stiffeners designed for FPCs need to meet requirements like dimensional

stability, mechanical stiffness, easy machinability or stamping, moisture

resistance and adhesion compatibility with the FPC substrate and

components. Here are some common materials used:

Plastics

Polyimide sheets offer a balance of stiffness, temperature resistance,

dimensional stability and cost-effectiveness. Popular grades include

Vespel, Duratron and Kapton. However, polyimide absorbs some moisture

which may be unsuitable for high humidity environments. It has limited

chemical resistance against solvents.

Acrylics like PMMA provide good moisture and chemical resistance along

with stiffness and stability. PMMA stiffeners retain flexibility and do not

become brittle over time. They adhere well to FPC substrates using acrylic

adhesives. However, acrylics have relatively lower temperature ratings.

Polycarbonate offers high tensile strength for mechanical rigidity

combined with temperature resistance exceeding 155°C. It also offers

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

flame retardant properties required in some applications. Polycarbonate

is prone to environmental stress cracking however.

LCP (liquid crystal polymer) grades like Zenite offer the best temperature

resistance (>240°C) and stiffness among plastic options. LCP has excellent

chemical resistance and ultra-low moisture absorption. But it is an

expensive material choice.

Metals

Stainless steel offers extremely high stiffness and environmental

resistance. It can withstand repeated flexing without cracking. Steel can be

easily stamped or machined to desired shapes. It needs nickel/gold plating

for soldering compatibility. Stainless steel substantially increases the

weight of the FPC assembly.

Aluminum provides good stiffness-to-weight ratio

and corrosion resistance while being lighter than steel. It is also low cost

and easy to fabricate, but not as rigid as steel for the same thickness.

Plating may be needed for soldering.

Copper has excellent thermal conductivity to dissipate heat from

components. This lightweight metal stiffener can be readily soldered to

the FPC copper traces without plating. But copper is prone to corrosion

and needs protective coatings.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Kovar alloy has matching coefficient of thermal expansion (CTE) as silicon

chips, minimizing solder joint stresses. However, kovar is not easily

soldered and is mainly used as leadframes for ICs rather than stiffeners.

Brass offers good stiffness and manufacturability though not as strong as

steel. It is prone to corrosion and needs protective nickel-tin plating

typically. Soldering compatibility is also excellent.

Composites

FR-4 combines good stiffness, dimensional stability and cost-effectiveness.

It can withstand processing temperatures over 150°C.

Being fiberglass reinforced epoxy, it bonds well with the FPC substrate.

However, FR-4 absorbs moisture and is not suitable for all environments.

CEM-1 laminates consisting of woven glass fabric in a cyanate ester resin

provide the highest thermal capabilities as stiffeners, withstanding over

280oC. They have very low outgassing and moisture absorption. But

CEM-1 material cost is also high.

Carbon fiber composites offer extremely high rigidity for their weight,

along with corrosion resistance and ambient temperature tolerance

exceeding 200°C. The high cost of carbon fiber is the main deterrent.

FPC Stiffener Design Considerations

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Some key factors to consider during design of FPC stiffeners are:

Stiffness requirements – The amount of flex that needs to be prevented

guides required stiffness. This helps select the material and thickness.

Area coverage – Partial patches or strips may suffice for localized

reinforcement versus covering larger areas. Stiffener footprint impacts

weight, cost and assembly considerations.

Component space – Cutouts, holes or voids need accommodation in the

stiffener for mounting components, connectors, displays etc.

Routing provisions – Stiffener location should avoid blocking

interconnection paths between components located on both sides of the

FPC.

FPC material and layers – More layers and thicker dielectric require higher

rigidity for equivalent stiffening. Stiffener adhesive selections depend on

the FPC substrate.

Assembly and inspection – Stiffener should not hamper component

placement, clamping, machine handling or manual assembly. Visual

inspections and rework access need consideration.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Weight and thickness – Overall thickness after stiffener installation should

meet product specifications. Weight limits steer material selection for

wearable and portable devices.

Environment – Temperature range, chemical exposure, moisture levels

and outgassing drive stiffener material selection.

Thermal dissipation – Heat dissipation may require

thermally conductive stiffeners under high power components. Electrical

and thermal insulation is needed for some applications.

Reworkability – Strippable stiffener adhesives may be preferred to allow

rework of underlying components after stiffener attachment.

Request FPC Manufacturing Quote Now

FPC Stiffener Attachment Methods

The stiffener must be securely fixed to the FPC substrate to prevent

separation or movement during use. The common joining methods

include:

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Adhesive bonding – Acrylic, epoxy or polyimide adhesives are commonly

used to bond the stiffener. Adhesive selection depends on materials and

environmental needs. Die-cutting can create custom bondline shapes.

Soldering – For metal stiffeners, solder paste can attach and electrically

ground it. Reflow attaches stiffener but risks heat damage to FPC

substrate. Selective hand soldering is preferred.

Press-in – Interlocking press-fit features on metal stiffeners physically lock

into the FPC substrate when compressed together. No adhesives are

needed. Allows stiffener removal for repairs.

Clips – Metal spring clips or fasteners screwed into the stiffener

mechanically clamp it to the FPC substrate firmly. Allows easy installation

and removal.

Screws – Screws passing through clearance holes in the FPC substrate can

thread into tapped holes in the stiffener to clamp it together. Supports

reworkability.

Riveting – Rivets installed in the stiffener are peened over onto the FPC

substrate to capture it. Allows stiffener removal by drilling out rivets.

Typical Applications of FPC Stiffeners

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Some common applications where FPC stiffeners provide important

benefits include:

Display driver FPCs – Stiffeners reinforce areas under driver ICs and

connectors to prevent damage due to handling and vibration in devices

like mobile phones, tablets, televisions etc.

Battery FPC interconnects – Mechanical robustness to withstand vibration

and shocks over long device lifetimes make stiffeners essential for

battery connector FPCs.

Medical products – For patient monitoring patches, implants and wearable

devices, stiffeners allow robust interface connectors while keeping

sensors flexible.

Automotive FPCs – Stiffeners used in cabling and sensors prevent damage

due to continuous vibration and thermal cycles over vehicle lifetime.

Robotics – Frequent robotic arm and gripper movements require local

stiffening on flex cables interconnecting movable sections for extended

mechanical endurance.

Consumer Electronics – Stiffeners reinforce FPC connections to PCBs in

smartphones, laptops and portable electronics that undergo drops and

shocks.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Industrial – FPCs used in motion control systems, pneumatic valves,

instrumentation etc. use stiffeners to create stable component mounting

interfaces and robust cabling.

Benefits of FPC Stiffeners

Some key benefits provided by FPC stiffeners include:

 Reinforce connector areas for increased mechanical robustness and

reliability

 Support fragile components like driver ICs and prevent failures

 Allow clamping and assembly handling of FPC without damage

 Improve stability for component placement, inspection and rework

 Prevent copper trace damage due to repeated bending stresses

 Absorb vibration and shock loads instead of transmitting them to

FPC

 Facilitate manual and automated assembly and fabrication

processes

 Allow double-sided component mounting for increased density

without shorts

 Enable reliable performance over expected product lifetime

 Protect flexible cable segments from complex motion stresses

FAQs

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Do FPC stiffeners help in heat dissipation?

Yes, choosing a thermally conductive stiffener under high

power components allows heat spreading into the stiffener effectively.

This reduces local hot spots.

Can multiple small stiffeners be used instead of one large one?

Yes, multiple discrete stiffener patches can be used for localized

reinforcement and component protection instead of a single large

stiffener.

Is the stiffener always in direct contact with FPC substrate?

Not always – standoffs can create an airgap between stiffener and FPC to

facilitate inspection while still providing mechanical protection.

What tolerance is essential in FPC stiffener fabrication?

As stiffeners align FPC substrates for assembly, typical machining

tolerance held is around ±0.10 mm. For placement near connectors or

components, ±0.05mm tolerance or better is recommended.

How thick is a typical FPC stiffener?

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

Stiffener thickness depends on rigidity required but is typically in 0.3mm

to 1mm range. Stainless steel can be as thin as 0.1mm but plastics need to

be thicker for equivalent strength.

The importance of FPC stiffener

The Flex PCB stiffener refers to a stiffener attached to the back of the FPC

when a widget such as a connector is attached to the FPC.

Request Flexible PCB Manufacturing Quote Now

From the point of view of reinforcing materials, various materials,

including metals and resins, can be provided depending on the

application.

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

FPC（Flexible Printed Circuit）it is a soft and flexible structure. This is the

biggest feature of FPC, but due to its soft structure, when connecting a

small part such as a connector to an FPC, it is necessary to place a

reinforcing plate on the back side of the electronic component to which

the connector is attached.

But why do you want to put a stiffener? There are three main reasons for

this. 1 solder resist off measure 2 solder pad drop countermeasure As

shown in the right side of Figure 1, when the connector mounted on the

FPC is inserted and removed, the FPC is soft, so external force is applied to

the terminal portions of some connectors. As a result, the welded portion

may fall off directly. Similarly, since the copper foil portion (pad) of the FPC

may also easily fall off from the underlying structure, the base portion.

This is where the mat falls off.

Request Flexible PCB Manufacturing Quote Now

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

In either case, as shown in the left part of Fig. 1, as long as a sufficiently

stiff reinforcing plate is placed on the FPC, it is possible to prevent the

force from being concentrated on the terminal portion, and the

solder/pad can effectively prevent the falling off.

3 Anti-substrate warpage countermeasures during reflow soldering

If the reinforcing plate is not attached during reflow soldering, the FPC will

bend and the correct soldering may not be possible.

At the same time, even if it is difficult to weld, the mounting portion

sometimes bends, which causes the mounting failure. (parts fall off)

PCB Manufacturing & Assembly Services https://www.raypcb.com/

 RAYMING PCB & ASSEMBLY

In order to keep the mounting surface flat and securely mounted, the

reinforcing plate is essential.

Related Posts:

1. What is PCB Busbar or PCB Stiffener Busbar in Electronics?

2. Printed Circuit Boards(PCB)and Their Applications in the LED

Lighting Industry

3. What is Single Sided Flexible PCB?

4. Rogers Material PCB – Rogers 4003C and Rogers 3003

https://www.raypcb.com/the-importance-of-fpc-stiffener/

PCB Manufacturing & Assembly Services https://www.raypcb.com/